--- Wojciech Puchar [EMAIL PROTECTED] wrote:
i'm now running generic 5.2.1 kernel (to narrow list
of possible sources).
i have:
atapci0: Intel PIIX4 UDMA33 controller port
0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on
On Thu, Jul 22, 2004 at 10:12:30AM +0700, Roger Merritt wrote:
I keep having problems with various ports. It seems a lot of them are
dependent on Perl 5.8.2 -- the dependency is specific, but I haven't been
able to figure out where the '5.8.2' is being specified. Here's an example:
===
[Kent Stewart, 2004-07-21]
Sometimes mirrors break. The only way to find out is to try a different
one. The port fastest_cvsup is a good starting point. Just remember
that the closest may not produce the overall fastest cvsup.
Not that I've tested this in any scientific manner, but I think
On Wednesday 21 July 2004 07:57 pm, Ara Avvali wrote:
I would love to send a big hug to people who helped me here about my
question regarding the update process
everything is fine now :-D
love you all
lol ;-)
Welcome to FreeBSD and the FreeBSD community.
Enjoy.
:-)
I have linprocfs mounted(dont remember if i have to do anything else).
Only problem i think could
appear is disk space. I could only free 1.7G for it i think i got a
different error avery time i freed a little bit more space when making in
/usr/ports/java/jdk14. The one that i get now is:
On Mon, 19 Jul 2004 15:50:21 -0300, Paulo Fonseca Jr. wrote:
How to enable plugins on konqueror ? I tried to: (on freebsd 5.1 and
KDE 3.1.2)
2) Setting -- Configure konqueror - Plugins - Search for new
plugins and it returns a message: The nspluginscan executable
cannot be found. Netscape
On 06/29/2004, you scribbled in freebsd.questions:
Is it possible to setup a file server with FreeBSD and use that
as a home partition and also share other files on a small
network?
yes. I am busy doing this to replace a Novell 3.12 server
What kinds of utilities would I need to run? I
Hi all,
I upgraded my ports collection with cvsup, and now I try to install
/usr/ports/sysutils/3dm and it says that the package is obselete. Is
there a way to override this?
Thanks,
Danny
___
[EMAIL PROTECTED] mailing list
[EMAIL PROTECTED] wrote:
How would I set up the encrypted port tunneling?
Something like:
ssh -L 5900:your.host.name:5900 your.host.name
should work. You can then connect to port 5900 on the local machine, and it
will be forwarded to your.host.name. Note also that you can forward X11
Hello!
If i am running raid5 on 3ware can i use the same disk array as
raid5 on, for example, high point controller without rebuilding
the array, just reattching disks to a new controller? Basically,
i am asking if raid5 is a industrially standard or every manufacturer
adds something to its
Lo all (again),
A bit off-topic, but I thought if there is something like what I want,
someone on this list should know about it...
I'm looking for IP Management software (IP Networks that is). Basically, my
own repository where I can allocate a certain network of numbers to a client
below us,
hello good day;
Want to ask help bout when i'm starting my apache1.3
its being core dump when the php4 module has been
added to configuration file and if not apache run in
good condition. Any help to solve this problem thanks
in advance.
=
Jobert
IT Operation Support Team Leader
Pinoymusic
Danny De Bie wrote:
I upgraded my ports collection with cvsup, and now I try to install
/usr/ports/sysutils/3dm and it says that the package is obselete. Is
there a way to override this?
Found it, and for the records, change te Makefile into:
#IGNORE=This port is obsolete and
the best part is they point you to the 3ware-site and actually there is nada
at the site :) no 3dm for freebsd lol
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Auftrag von Danny De Bie
Gesendet: Donnerstag, 22. Juli 2004 14:16
An: Danny De Bie
Cc: [EMAIL
[Alexander Liebau, 2004-07-22]
the best part is they point you to the 3ware-site and actually there is nada
at the site :) no 3dm for freebsd lol
http://www.3ware.com/support/download.asp
Correct me if I'm wrong (I don't know what exactly that you're looking
for), but you can select FreeBSD
yes but no 3dm :) according to the website the 3dm-utility is only available
for windows and linux :(
only thing available is the 3dm2 utility which seems to be only for the
newest generation raid controllers :(
-Ursprungliche Nachricht-
Von: Svein Halvor Halvorsen
[mailto:[EMAIL
Svein Halvor Halvorsen wrote:
[Alexander Liebau, 2004-07-22]
the best part is they point you to the 3ware-site and actually there is nada
at the site :) no 3dm for freebsd lol
http://www.3ware.com/support/download.asp
Correct me if I'm wrong (I don't know what exactly that you're looking
ok i need to correct my statement.. 3dm2 supports the old controllers.. its
just that 3-ware doesnt offer it for download for those... just choose a
newer controller and download it :)
-Ursprungliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Auftrag von Svein Halvor
just choose a newer controller... i downloaded the package and the readme
says it supports the older controller as well..
-Ursprungliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Auftrag von Danny De Bie
Gesendet: Donnerstag, 22. Juli 2004 14:33
An: [EMAIL PROTECTED]
Cc:
Does anyone know how good it is? Does command
queueing helps a lot? Are the drivers stable? Is it true
hardware raid5?
Regards,
Artem
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
If i am running raid5 on 3ware can i use the same disk array as
raid5 on, for example, high point controller without rebuilding
the array, just reattching disks to a new controller? Basically,
i am asking if raid5 is a industrially standard or every manufacturer
adds something to its specs.
Hi All
I am a newbie to FreeBSD.
We have the following setup in a lab environment:
* PC1 (IP: 192.168.10.2/24) connected with cross over to wireless router
A (IP: 192.168.10.1/24 - sis0)
* PC2 (IP: 192.168.20.2/24) connected with cross over to wireless router
B (IP: 192.168.20.1/24 - sis0)
*
First off, most of the people in the FreeBSD lists can get fairly upset
when they see people cross-posting to more than one list at a time.
Sorry, i got the point. I just thought it was related to both list.
Apperantly i thought wrong.
You'd be better off cloning the RAID array, say to
Alexander Liebau wrote:
just choose a newer controller... i downloaded the package and the readme
says it supports the older controller as well..
Tried it, but didn't succeed... can't connect via the web interface...
Ah well, as long as the older software works... ;)
Kind regards,
D.
Hi,
I've installing several packages (using pkg_add) lately, and tried many more. I
generally use the pkg_add ftp://ftp.netbsd.org/(...) method, with decent success. My
problem is that I cannot always find the packages I need! For example, while
installing a package listed under
I'm not really sure if it matters or not, but using ftp.freebsd.org
might make a difference. Not sure if NetBSD uses the same ports-tree as
FreeBSD does.
Cheers,
Jorn
Hi,
I've installing several packages (using pkg_add) lately, and tried
many more. I generally use the pkg_add
it works.. the port has changed and its now ssl-encrypted -
https://servernameorip:888 by default
-Ursprungliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Auftrag von Danny De Bie
Gesendet: Donnerstag, 22. Juli 2004 15:15
An: Alexander Liebau
Cc: [EMAIL PROTECTED]
Me again...I left out some pertinant info (the coffee hasnt kicked in yet :P)
Yeah, I'm running NetBSD, 1.6.2. I just found documentation that pointed to the
FreeBSD docs for more info...and when I RTFM for FreeBSD, I see theres a -r option
for pkg_add that will fetch the correct everything for
I'm Sorry due to spam [EMAIL PROTECTED] is no linger in service. Please use [EMAIL
PROTECTED] Thank you.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Alexander Liebau wrote:
it works.. the port has changed and its now ssl-encrypted -
https://servernameorip:888 by default
Aaargh :) Http ... HttpS ... grrr... :)
Anyway, took out a HD, putted it back in, controller is rebuilding.
Installed new software, and halelujah it seems to work :)...
Me again...I left out some pertinant info (the coffee hasnt kicked in
yet :P)
Yeah, I'm running NetBSD, 1.6.2. I just found documentation that
pointed to the FreeBSD docs for more info...and when I RTFM for
FreeBSD, I see theres a -r option for pkg_add that will fetch the
correct everything
It's a bit different. Assuming that you are using i386 and bourne shell:
export PKG_PATH=ftp://ftp.NetBSD.org/pub/NetBSD/packages/1.6.2/i386/All
pkg_add -v mozilla
Simple as that, check out pkg_add(1)
Cheers, NikV
On Thursday 22 July 2004 16:34, Ogre wrote:
Me again...I left out some pertinant
Want to thank you guys for your help; I setup my first firewall last night.
Granted it is basic, and have a lot of work to do yet, but it's a start. It
is routing and letting my test machines access the web.
Hopefully the last question (yeah right)
I decided to use IPFILTER and appears to be
No Message Collected
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
With that said, are some packages (for lack of better words--) not supported on
certain builds? I'm running on a sparc box, 1.6.2. If you were to look at the
packages available on 1.6.2, for sparc, there are none! =(
Thanks for your time,
Reggie
-- Original Message
I believe the problem is solved. I reloaded the firmware for the
controller following instructions available at
http://h18000.www1.hp.com/support/files/server/us/download/13739.html.
I followed the Netware version of the instruction and all. The update
time was well over an hour. HP manual
With that said, are some packages (for lack of better words--) not
supported on certain builds? I'm running on a sparc box, 1.6.2. If you
ftp.netbsd.org seems to be down. Choose a mirror.
ftp://ftp.gr.netbsd.org/pub/NetBSD/packages/1.6.2/sparc64/All
I didn't see any sparc directory. I am
ok i set up the same thing you want :) i used icecast2 (ports) and
icegenerator (http://sourceforge.net/projects/icegenerator) works perfectly
fine for me (im currently streaming my mp3-directory on my server) and i
listen to it via winamp on another machine :)
i hope this helps
Alexander,
Thanks to you and everyone else who provided insight on this problem. I
actually got everything finished and working late last night using IceS as
the stream client and IceCast to stream out the music. It works quite well,
I've actually made a big playlist of all my songs and it
With that said, are some packages (for lack of better words--) not
supported on certain builds? I'm running on a sparc box, 1.6.2.
I believe so, yes. I tried FreeBSD-AMD64 and cvsup didn't exist for AMD64.
ftp.netbsd.org seems to be down. Choose a mirror.
Thanks to all for answer.
Effectively I use memtest86 to find a Bad module in my box, so I remove it and for the
moment by box is running well.
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de
Robert Storey
Envoyé : jeudi 22 juillet 2004 16:18
I have all of these in my kernel config file, but I'm getting the
following in my dmesg;
ata1-master: FAILURE - ATAPI_RESET no interrupt
acd0: CDRW TOSHIBA DVD-ROM SD-R2412 at ata1-master PIO4
cd0 at ata1 bus 0 target 0 lun 0
cd0: TOSHIBA DVD-ROM SD-R2412 1330 Removable CD-ROM SCSI-0 device
cd0:
Hi,
I have a strange problem with the NVidia drivers on my machines: when I start
a glx-application (glxgears, quake2...) the performance is normal. If I
make another attempt a few minutes later, the performance is ridiculous slow.
Example:
glxgears, 1st run: 6400 FPS
glxgears, 2nd run: 17
Unfortunately that is not the solution to my problem, I've run
memtest86 on my laptop several times and found no problems... any
other thoughts? =)
-joe
On Thu, 22 Jul 2004 17:17:28 +0200, Cedric GROSS [EMAIL PROTECTED] wrote:
Thanks to all for answer.
Effectively I use memtest86 to find a
Quoting Uwe Laverenz [EMAIL PROTECTED]:
Hi,
I have a strange problem with the NVidia drivers on my machines: when I start
a glx-application (glxgears, quake2...) the performance is normal. If I
make another attempt a few minutes later, the performance is ridiculous slow.
Example:
glxgears, 1st
Hi,
Having a weird problem.
%df
Filesystem 1K-blocksUsedAvail Capacity Mounted on
/dev/da0s1a516062 112528 36225024%/
/dev/da1s1e 705661667792 64913082 0%/data
/dev/da2s1e 352830581430 32458984 0%/logs
/dev/da0s1f516062 16 474762
Peter,
Been there done that, actually.. sorry I forgot to mention it.
But thanks for the suggestion!
-joe
On Thu, 22 Jul 2004 16:53:29 +0100, Peter Risdon
[EMAIL PROTECTED] wrote:
Joseph Peterson wrote:
I have all of these in my kernel config file, but I'm getting the
following in my dmesg;
On Thu, Jul 22, 2004 at 05:20:44PM +0200, Uwe Laverenz wrote:
Hi,
I have a strange problem with the NVidia drivers on my machines: when I start
a glx-application (glxgears, quake2...) the performance is normal. If I
make another attempt a few minutes later, the performance is ridiculous
I maybe wrong here, but i think it has something to do with you using
USB2.0 enclosure. 4.9 doesn't support USB2.0, from 4.10 it does.
This maybe your problem.
Maybe someone else from the list may have a better idea than i do.
Thanks Ana. I was actually incorrect about my setup - the disk
On Thu, Jul 22, 2004 at 11:59:13AM -0400, Tuc typed:
Hi,
Having a weird problem.
%df
Filesystem 1K-blocksUsedAvail Capacity Mounted on
/dev/da0s1a516062 112528 36225024%/
/dev/da1s1e 705661667792 64913082 0%/data
/dev/da2s1e 352830581430
I have 15 FreeBSD machines on my network (soon to be around 30) and want
to synch all the machines userid and passwords. Is NIS still the
primary way to do this or is there a better solution?
--
Ray Seals [EMAIL PROTECTED]
___
[EMAIL PROTECTED]
Ray Seals [EMAIL PROTECTED] wrote:
I have 15 FreeBSD machines on my network (soon to be around 30) and want
to synch all the machines userid and passwords. Is NIS still the
primary way to do this or is there a better solution?
As far as I understand it, yes. Although Kerberos seems to be a
On Thursday 22 July 2004 13:23, Bill Moran wrote:
Ray Seals [EMAIL PROTECTED] wrote:
I have 15 FreeBSD machines on my network (soon to be around 30) and
want to synch all the machines userid and passwords. Is NIS still the
primary way to do this or is there a better solution?
As far as
On Wed, 21 Jul 2004 15:41:56 +0200
Cedric GROSS [EMAIL PROTECTED] wrote:
Hello,
I'm running an AMD Duron 700 Box with freeBSD 5.2.1 - RELEASE, and
sometimes the system freeze so I must reboot. I haven't anything in
log. So, What could be the problem ?
How could I obtain some clue of the
Kirk Strauser [EMAIL PROTECTED] wrote:
On Thursday 22 July 2004 13:23, Bill Moran wrote:
Ray Seals [EMAIL PROTECTED] wrote:
I have 15 FreeBSD machines on my network (soon to be around 30) and
want to synch all the machines userid and passwords. Is NIS still the
primary way to do
Joseph Peterson wrote:
I have all of these in my kernel config file, but I'm getting the
following in my dmesg;
ata1-master: FAILURE - ATAPI_RESET no interrupt
acd0: CDRW TOSHIBA DVD-ROM SD-R2412 at ata1-master PIO4
cd0 at ata1 bus 0 target 0 lun 0
cd0: TOSHIBA DVD-ROM SD-R2412 1330 Removable
I am trying to install 5.2.1 on a system with a Promise Ultra-133 TX2000
IDE RAID controller with RAID 1 on two disks.
The install goes smoothly, however when the system reboots, it hangs on:
Mounting root from ufs:/dev/ar0s1a
fixed-ing in and building a new kernel from the
whats the best way to change from xfree86 to x.org? Just go in to
x11-servers and uninstall one and install the other?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
On Thu, Jul 22, 2004 at 02:46:57PM -0400, Bill Moran wrote:
Were you able to make this work well with 4.x machines? It's been a while
since I tried, but I had problems with nss turning UIDs back into names.
This would still be a problem, because there is no support for nss_ldap in
FreeBSD
Hi!
I intent to procure FreeBSD with a very large, scary book soon. I am also
wondering if I should make the switch to a 64-bit system. Will GCC64, or
some equivilent compile under FreeBSD?
Thanks
- Sean
_
Planning a family
Hi,
I am currently switching some servers from freebsd 4.x
to freebsd 5.2.1. I had many problems with differences
in handling of usb devices, ufs1-ufs2, /dev/xxx and
/devfs, /proc not mounted by default.
I there a document that describes (a summary of)
the differences between freebsd 4.x and 5.x
Hi all,
I have a Davicom DM9102 that is getting the message dc0: failed to
force tx and rx to idle state, I thought that cable is with same
problem but there is no throuble in my network and I didn´t find nothing
related in the man page, it´s normal?
Apropos dmesg, What means ata0:
On Thu, Jul 22, 2004 at 02:23:36PM -0400, Bill Moran wrote:
Ray Seals [EMAIL PROTECTED] wrote:
I have 15 FreeBSD machines on my network (soon to be around 30) and want
to synch all the machines userid and passwords. Is NIS still the
primary way to do this or is there a better solution?
Joseph Peterson wrote:
Unfortunately that is not the solution to my problem, I've run
memtest86 on my laptop several times and found no problems... any
other thoughts? =)
-joe
Just a thought:
Have you build your world and / or kernel from source? If that's the
case double check
From: [EMAIL PROTECTED]
Date: Tuesday, July 20, 2004 9:25 am
From: [EMAIL PROTECTED]
Date: Tuesday, July 20, 2004 8:58 am
From: Dinesh Nair [EMAIL PROTECTED]
Date: Tuesday, July 20, 2004 7:44 am
what does '/sbin/fdisk da2' say ?
Regards,
Nope, not setting any of those...
On Thu, 22 Jul 2004 22:19:26 +0200, Karol Kwiatkowski
[EMAIL PROTECTED] wrote:
Joseph Peterson wrote:
Unfortunately that is not the solution to my problem, I've run
memtest86 on my laptop several times and found no problems... any
other thoughts? =)
On Thursday 22 July 2004 09:29 am, Justin W. Pauler wrote:
Alexander,
Thanks to you and everyone else who provided insight on this problem.
I actually got everything finished and working late last night using
IceS as the stream client and IceCast to stream out the music. It
works quite well,
This question sounds like it has an easy answer at first but please bear
with me. I am going to setup a network tap to monitor network traffic
flows. The machine will be running FreeBSD 4.10 and has two NICs. One
interface will be used for management and the other will be to collect
the flows.
well its ass configured in a configfile.. ints not possible to choose titels
on the rum :)
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Auftrag von Andrew L.
Gould
Gesendet: Donnerstag, 22. Juli 2004 23:34
An: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Betreff: Re:
Andrew,
No, everything is console based. For example, my setup consists of:
1. Making a playlist: a text file listing each song
in my collection (locate *.ogg playlist)
2. Starting IceCast
3. Starting IceS
4. Listening
IceS then reads the
On Monday 19 July 2004 09:27, Fractal wrote:
I have a FreeBSD 4.8 and I need to install on the same machine
WindowsNT-like operating system. I tried to do this and installed it. But
after recovering of BSD bootstrap loader using sysinstall I found that I
cannot load Windows. Namely, there was
On Tuesday 20 July 2004 21:22, Paulo Fonseca Jr. wrote:
how to print easly with HP deskjet on freebsd5.1+kde3.1.2 ? Can anybody
help me?
Zumba.
check out the CUPS port, /usr/ports/print/cups or the apsfilter
port, /usr/ports/print/apsfilter. I prefer the latter, as it uses your
native
I successfully built a kernel for FreeBSD 5.2.1-RELEASE #1 on my 8Gig ad2 but
when I boot it my 30Gig ad0 does not appear in /dev/
I boot 4.10-STABLE on my 30 Gig ad0 and am able to mount ad2, but not vice
versa.
Does anyone have information on how to trouble-shoot GEOM?
Thanks
lane
hello group
does anybody knows anything about the amigo dsl ca-80u usb modem on freebsd?
or how to install the linux accessrunner drivers of sourceforge in freebsd?
___
[EMAIL PROTECTED] mailing list
I guess I missed your first post.
One thing I don't see in your posts is any mention of whether or not
you're running FBSD 4.x or 5.x. My experience with 4.x is that cards of
any type either don't work or work badly. I've had much better luck with
5.x. Aside from drivers, I believe this is due to
If you want a good RAID controller, use Intel SRCZCR. It does RAID-5 and
if you had a defective controller and the controller was replaced, your
RAID would be intact.
I am speaking of SCSI RAID.
Hope that helps.
Lanny
Does anyone know how good it is? Does command
queueing helps a lot? Are
On 2004-07-22T13:24:09+0200, Chris Knipe wrote:
Lo all (again),
A bit off-topic, but I thought if there is something like what I want,
someone on this list should know about it...
I'm looking for IP Management software (IP Networks that is). Basically, my
own repository where I can
On Tue, Jul 13, 2004 at 10:51:21AM -0500, James A. Coulter wrote:
I am trying to setup my FreeBSD 4.10 box as an internet gateway for a
small home LAN (2x Win XP and 1x Win 98SE)
The LAN operates without any problems when using the Win 98SE box as a
gateway - all computers can
From: Robert Storey [EMAIL PROTECTED]
Date: Friday, July 23, 2004 1:46 am
I guess I missed your first post.
One thing I don't see in your posts is any mention of whether or not
you're running FBSD 4.x or 5.x. My experience with 4.x is that
cards of
any type either don't work or work
If you run your own DHCP server then you can lock IP numbers via their
MAC id there for the machines you trust.
Then allow them appropriate access via ipf and corral the rest.
(In DCHP create a 'pool' for others that uses a different section of
your ip range)
HTH
mjt
On Thu, 2004-07-22 at
Hi,
This is probably a contender for the dumbest question
of the year.
When I defined my IP address in the freeBSD installation,
I had to give a name. All the examples use something
like the one I entered, i.e. peter.first.try, except they
often used a xxx.xxx.com.
Could someone point me to
Hi
does anybody know if there is a program like symantec ghost so i can
back up and duplicate ufs file system disks and slices for recovery and
easy duplicating?? I looked at recuse CD but it says ufs is still in
test
also is there any program for resizing slices and partition ? i looked
on ports
alden.pierre wrote:
When it's time to compile the GENERIC kernel my system locks up,
forcing me to reboot. Here is an output of dmesg. I'm running
FreeBSD 4.10. I also can provide an
attachment of the compiling output.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980,
how do i upgrade fbsd 4.9 perl 5.8.0 installed from ports, to perl 5.8.4
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Friday 23 July 2004 01:41 am, Steve wrote:
how do i upgrade fbsd 4.9 perl 5.8.0 installed from ports, to perl
5.8.4
portupgrade perl
use.perl port
portupgrade -f p5\*
It is all in /usr/ports/UPDATING
You also need to
portupgrade -f automake
with the p5- stuff
Kent
--
Kent Stewart
On Wednesday 21 July 2004 02:10 am, Wojciech Puchar wrote:
cat file | uuencode tgt_filname | mail -s subject [EMAIL PROTECTED]
uuencode tgt_filname | mail -s subject [EMAIL PROTECTED]
instead of cat. less one unneeded piping.
subject can be derived from shell script variables if
86 matches
Mail list logo
