Your mail to 'swinog' with the subject
Status
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you will receive
notification of the moderator's
On 29/01/07, anup roy [EMAIL PROTECTED] wrote:
dear
I have office in kolkata and also I have a pc in another city like Mumbai , i
want connect to pc by Isdn, I want to communicate via Isdn what will be the
process ?
You could start by reading chapters 27.7 (ISDN) and 22 (Serial
Networking)
Kris,
On 29/01/07, Kris Kennaway [EMAIL PROTECTED] wrote:
To put it bluntly, it's something you're just going to have to get
over :-)
That's unhelpful. It is, in my opinion, a bad idea to have to mount up 1400
instances of devfs just to get a few device nodes. It just doesn't seem
right.
Hey guys,
I've downloaded multiple copies (from different FTP servers),
6.2-RELEASE-ia64 and it seems like this particular image doesn't want to
boot up in my system. The i386 and amd64 distro's bootup just fine, but
obviously don't work because system architecture is 64bit Intel. I'm out of
On Tue, Jan 23, 2007 at 08:30:49AM -0600, VH-Brody wrote:
Hey guys,
I've downloaded multiple copies (from different FTP servers),
6.2-RELEASE-ia64 and it seems like this particular image doesn't want to
boot up in my system. The i386 and amd64 distro's bootup just fine, but
obviously
On 1/29/07, Karl Fischer [EMAIL PROTECTED] wrote:
On 29 Jan 2007, at 5:04 PM, Björn König wrote:
Karl Fischer schrieb:
Hi
I'm a n00b to freebsd and jails is there away that I can specify
multiple Directories in the jails.conf ?
JAIL_HOME=/data1; /data2 etc.
What are you trying to do or
[EMAIL PROTECTED] wrote:
On 29 Jan 2007, at 5:04 PM, Björn König wrote:
Karl Fischer schrieb:
Hi
I'm a n00b to freebsd and jails is there away that I can specify
multiple Directories in the jails.conf ?
JAIL_HOME=/data1; /data2 etc.
What are you trying to do or what do you expect?
A
Hello,
I am backing up 5 servers on one centralized machines using
rsnapshot It is doing a perfect job, including :
-- SSH transport.
-- Rsync based.
-- Incremental backup.
As It uses a symlink strategy, It does not use very much space on the
backup device.
It is in the ports
Hello!
How to overcome a problem with such video card.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On 1/30/07, Gorobets Igor [EMAIL PROTECTED] wrote:
Hello!
How to overcome a problem with such video card.
Wait for Xorg 7.x with your fingers crossed.
___
freebsd-questions@freebsd.org mailing list
I updated my pentium 3 PC Compaq Desktop 450 from freebsd 5.3 (which
was working like a charme indeed!) to the new 6.2 installing from a CD.
It happens that the boot
1) runs smoothly as usual till after the
probing of the CDs,
2) then the boot hangs for about 3 minutes probing
the floppy (I
On Tue, 30 Jan 2007 07:50:30 +0100, Marc Fonvieille wrote:
On Tue, Jan 30, 2007 at 12:43:21PM +0800, peter wrote:
6.Check the libexec directory exists in /usr/src,
if no, #sysinstall- custom-deistributions-src-libexec, then
# cd /usr/src/libexec
# fetch
After updating from 6.1 to 6.2, I went and tried to update my installed
ports. After running portsnap, I ran portmanager, which updated
everything save proftpd. This was over a week ago. Since that time,
I've tried to update proftpd on a few occasions with the same failed
result. The issue
Does anyone out there use the sub-targets in /usr/src/release independent
of the 'make release' target? I'm looking to build customized install ISOs
from a highly stripped down 'make buildworld'.
I want to build the stripped version of the userland and kernels using my
make.conf(5) in my
On Tuesday January 30, 2007 at 09:48:38 (AM) Greg Groth wrote:
I've tried to download the file manually, but have only been able to
connect to ftp://ftp.fastorama.com/mirrors/ftp.proftpd.org. When I
download the file from that site, I get a checksum mismatch. Attempts
to FTP to
On 1/30/2007 9:37 AM, Gerard Seibert wrote:
On Tuesday January 30, 2007 at 09:48:38 (AM) Greg Groth wrote:
I've tried to download the file manually, but have only been able to
connect to ftp://ftp.fastorama.com/mirrors/ftp.proftpd.org. When I
download the file from that site, I get a
Andrew Pantyukhin [EMAIL PROTECTED] wrote:
On 1/30/07, Gorobets Igor [EMAIL PROTECTED] wrote:
Hello!
How to overcome a problem with such video card.
Wait for Xorg 7.x with your fingers crossed.
I see Radeon XPRESS 200/200M IGP listed in 6.9.0 radeon(4):
Hello,
Björn König schrieb:
You can modify the existing floppy images. boot.flp contains the first
part of the kernel and kern*.flp the further parts.
Build a custom kernel using
makeoptions MODULES_OVERRIDE=
in your kernel configuration file.
# cd /usr/src/sys/i386/conf
#
On 1/30/07, loader [EMAIL PROTECTED] wrote:
Andrew Pantyukhin [EMAIL PROTECTED] wrote:
On 1/30/07, Gorobets Igor [EMAIL PROTECTED] wrote:
Hello!
How to overcome a problem with such video card.
Wait for Xorg 7.x with your fingers crossed.
I see Radeon XPRESS 200/200M IGP listed in 6.9.0
It works fine on my Laptop though. Even Xorg 6.9.0 works great.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Tue, Jan 30, 2007 at 06:31:33AM -0800, David Benfell wrote:
On Tue, 30 Jan 2007 07:50:30 +0100, Marc Fonvieille wrote:
On Tue, Jan 30, 2007 at 12:43:21PM +0800, peter wrote:
6.Check the libexec directory exists in /usr/src,
if no, #sysinstall- custom-deistributions-src-libexec, then
I have a problem, I get 2 link ADSL of the TELEMAR Brazil, but
don't to connect whit PPP.
my script its ppp.conf:
--
default:
set timeout 0
set log local phase lcp ipcp tun
nat enable yes
enable dns
velox1:
set device PPPoE:xl1
set
On Tue, Jan 30, 2007 at 03:14:49PM +0100, Vittorio wrote:
I updated my pentium 3 PC Compaq Desktop 450 from freebsd 5.3 (which
was working like a charme indeed!) to the new 6.2 installing from a CD.
It happens that the boot
1) runs smoothly as usual till after the
probing of the CDs,
On Tue, Jan 30, 2007 at 09:25:24AM +, Freminlins wrote:
Kris,
On 29/01/07, Kris Kennaway [EMAIL PROTECTED] wrote:
To put it bluntly, it's something you're just going to have to get
over :-)
That's unhelpful. It is, in my opinion, a bad idea to have to mount up 1400
instances of
Andreas Davour wrote:
I did try to set up my environment like you described. But, in the
listarchive the ftp site you mentioned is scrambled. Could you please
repost it? The site I used didn't have many of the packages.
I suppose you are talking about PKG_SITES. I use this Norwegian mirror:
Hi,
I am running FreeBSD 5.4-RELEASE
In an effort to update my ports collection, I ran CVSup, with the line
ports-all
in my cvs_supfile
After the update finished, I noticed that some of my ports that were there
before, notably php5-cgi, were no longer there.
I'd appreciate being pointed in
Noah [EMAIL PROTECTED] writes:
FreeBSD 4.9
openssh-3.6.1_6
so I have a script /usr/local/etc/rc.d/sshd.sh that I use to restart sshd
but sshd most of the time never comes back.
there is nothing relevant that makes it to /var/log/messages
if I start sshd manually with
Charlie McElfresh [EMAIL PROTECTED] writes:
Hi,
I am running FreeBSD 5.4-RELEASE
In an effort to update my ports collection, I ran CVSup, with the line
ports-all
in my cvs_supfile
After the update finished, I noticed that some of my ports that were there
before, notably php5-cgi, were
Hi,
I wrote a perl script to get a news show I like. When I run it, it deletes
yesterday's copy of the show, and downloads the new copy. The script works
fine. I run the script as myself (charlie), charlie owns it, and it's
chmod'd 0755. Works fine.
I can't get cron to run it, though.
I got this response off-list:
Lowell Gilbert wrote:
Erik Norgaard [EMAIL PROTECTED] writes:
table internet const { !0/8 !10/8 !127/8 !169.254/16 !172.16/12 \
!192.0.2/24 !192.168/16 !198.18/15 !224/4 !240/4 }
Think about it; this matches *everything*. All possible
Hi,
I am running FreeBSD 5.4-RELEASE
In an effort to update my ports collection, I ran CVSup, with the line
ports-all
in my cvs_supfile
After the update finished, I noticed that some of my ports that were there
before, notably php5-cgi, were no longer there.
I'd appreciate being
Hi,
Charlie McElfresh schrieb:
I wrote a perl script to get a news show I like. When I run it, it deletes
yesterday's copy of the show, and downloads the new copy. The script works
fine. I run the script as myself (charlie), charlie owns it, and it's
chmod'd 0755. Works fine.
I can't
On Tuesday January 30, 2007 at 02:13:45 (PM) Charlie McElfresh wrote:
I wrote a perl script to get a news show I like. When I run it, it deletes
yesterday's copy of the show, and downloads the new copy. The script works
fine. I run the script as myself (charlie), charlie owns it, and it's
On Tue, Jan 30, 2007 at 10:20:03AM -0800, Charlie McElfresh wrote:
After the update finished, I noticed that some of my ports that were there
before, notably php5-cgi, were no longer there.
Check out Freshports: http://www.freshports.org/commits.php
This gives you an overview of recently
php5-cgi hasn't been a separate port for some time. Try make config in
lang/php5.
~BAS
On Tue, 30 Jan 2007, Charlie McElfresh wrote:
Hi,
I am running FreeBSD 5.4-RELEASE
In an effort to update my ports collection, I ran CVSup, with the line
ports-all
in my cvs_supfile
After the
It seems as though something in my setup or in Sendmail 8.13.8 is
causing certain domains, namely Hotmail, to keep sending messages over
and over up to 15 times. Each message is accepted and sent to the
user. The MX is just a machine that has 6.2, spamassassin, clamav,
milter-regex and some
Hello!
I'm currently running FreeBSD 6.2-RELEASE (amd64) on a system based on
Intel SE7230NH1-E motherboard, which has Intel ICH7R integrated
softraid. The machine has two 500 GB drives which are configured as
RAID1 in BIOS. Unfortunately, this setup seems to have some stability
issues which
This may be from badly formed headers. This occurs most often in
SPAM. You can change the logging on your sendmail and see if the
conversations actually complete. I would bet they are not completing,
instead erroring out, so the messages get resent. The usual fix is to
clear the mail out
Out of idle curiosity, I dug out my old box of Zip disks (mainly consisting of
backups of an Amiga computer I sold many years ago). The FreeBSD docs have
an excellent howto for making UFS-formatted disks, but I'd really like to
format a disk that's basically identical to how it would have
I think I've fixed the spontaneous reboot and system hang problem I've been
having with FBSD 6.1 6.2 as described in earlier threads of the same
subject. I'm now using FBSD 6.2 to send this message.
What I did was to set a hint in /boot/device.hints and also /boot/loader.conf
to disable acpi
I've enabled the firewall in /etc/rc.conf via:
firewall_enable=YES
firewall_type=client
But, ports 0 and 1 show as CLOSED, not STEALTHED at grc.com shieldsup! scan.
I'm on a standalone desktop computer with no LAN and am using a dialup
connection to access the internet. I've set the firewall
On Tue, Jan 30, 2007 at 07:20:47PM -0600, Joe Vender wrote:
I think I've fixed the spontaneous reboot and system hang problem I've been
having with FBSD 6.1 6.2 as described in earlier threads of the same
subject. I'm now using FBSD 6.2 to send this message.
What I did was to set a hint
On Tuesday 30 January 2007 19:39, Kris Kennaway wrote:
snipped
It does try to detect it; the problem is apparently that your BIOS
lies and says yep, ACPI capable!, but is in fact too buggy to use.
Look for a BIOS update if possible.
kris
I hate to say it, but I spoke to soon or jinxed
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Kirk Strauser
Sent: Wednesday, 31 January 2007 12:21 PM
To: freebsd-questions@freebsd.org
Subject: Labeling a backward-compatible Zip disk?
Out of idle curiosity, I dug out my old box of Zip disks
- Original Message
From: Garrett Cooper [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Sent: Sunday, January 28, 2007 12:16:08 PM
Subject: Re: FreeBSD 6.2 install CD causes immediate reboot
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Erik Trulsson wrote:
On Sun, Jan
Hello,
I have a new machine with an ASUS motherboard that
has, or is supposed to have dual ethernet interfaces.
And in fact it has two rj-45 ports for connecters.
But when I use sysinstall to configure the interfaces
all I get is fwe0 fire wire ethernet emulation.
And when I use sysinstall it
--- Jared Barneck [EMAIL PROTECTED] wrote:
--- [EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
Ceri Davies wrote:
On Thu, Jan 25, 2007 at 07:28:39PM -0500, Tom
Rhodes wrote:
On Thu, 25 Jan 2007 14:54:47 +
Ceri Davies [EMAIL PROTECTED] wrote:
On Wed, Jan
On Tue, Jan 30, 2007 at 08:01:18PM -0600, Joe Vender wrote:
On Tuesday 30 January 2007 19:39, Kris Kennaway wrote:
snipped
It does try to detect it; the problem is apparently that your BIOS
lies and says yep, ACPI capable!, but is in fact too buggy to use.
Look for a BIOS update if
Using FreeBSD v6.0. Need separate local and public
connections to this machine.
There's your problem. If it's the board I'm thinking of, it has one of
the newer Marvell chipsets which isn't supported in 6.0. Give
6.2-RELEASE a shot, and I imagine it'll see your network cards.
Josh
Hi,
I have a slow Internet connection at home and a fast one in the office.
I want to download a package and ALL dependencies from office PC then
take them and install them at home. My question is where are the
packages stored after being downloaded with pkg_add -r zzz.
Thanks,
Amer,
On 31/01/2007 3:05 PM, Jared Barneck wrote:
...
I found the answer for how to reboot in the code. To
reboot add the following to the end of the
install.cfg:
shutdown
I found it in this source file:
/usr/src/usr.sbin/sysinstall/dispatch.c
This source file has a list of a lot of the functions
I have a slow Internet connection at home and a fast one in the office.
I want to download a package and ALL dependencies from office PC then
take them and install them at home. My question is where are the
packages stored after being downloaded with pkg_add -r zzz.
From man pkg_add:
-K
52 matches
Mail list logo
