Re: Why do I have to keep doing portsnap extract?
On 5/4/06, Colin Percival [EMAIL PROTECTED] wrote: Peggy Wilkins wrote: On 5/4/06, Jason Morgan [EMAIL PROTECTED] wrote: Did you run `extract' after your original `fetch'? Yes, I did; I followed the instructions exactly. I ran portsnap for the first time a couple weeks ago after which I successfully did a bunch of portupgrades. Then the ports tree sat there on my disk untouched for a couple of weeks until I ran portsnap fetch update today. For some reason it insisted that I needed to run extract when as far as I can tell that shouldn't have been necessary. Do you have a .portsnap.INDEX file in your ports tree? Yes; I don't know if it was there before I ran portsnap today, though. -rw-r--r-- 1 root wheel 1230186 May 4 16:39 .portsnap.INDEX plw ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
6.1 install problems with creating partitions
trying to install 6.1 on my secondary master partition or slice 2. I come from linux so please be forgiving with the naming or slices and partitions. i created a 40G slice on ad3 with fdisk, then with disklabel i created a 4g /a 512M swap and the rest for /home i used the S option on the / partition. the installer gives me and error saying that it wasn't able to create the partions on the slice and the install aborts. what can i do? i don't wanna give up that ext3 part on this drive. thanks -- Eric Dan [EMAIL PROTECTED] UCLA ID#103297286 http://www.vladuz976.com/ GPG key: FD13E94D ( B9D1 7D8D 34E0 D0B7 D3C9 4571 0BAC 1DC7 FD13 E94D) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
pkg_add gnuplot
Hey, I'm trying to add the package gnuplot, and when I do, it goes and tries to add another necessary package pdflib. The issue is that it cannot find pdflib. I get the following: pkg_add -r gnuplot Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6.0-release/Latest/gnuplot.tbz... Done. Error: FTP Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6.0-release/All/pdflib-6.0.1_2.tbz: File unavailable (e.g., file not found, no access) pkg_add: can't open dependency file '/var/db/pkg/pdflib-6.0.1_2/+REQUIRED_BY '! dependency registration is incomplete For some reason the file does not exist on the server. Is there another method that I can get pdflib that pkg_add will recognize for when I pkg_add -r gnuplot again? Thanks, Jon ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 6.1 install problems with creating partitions
update: I actually backed up the ext3 to another hard drive and got rid of all partitions and slices on that drive. installer still can't do it. the exact error says: unable to make new root file system on ad3sa1 then i hit return and it says: couldn't make file system properly any ideas? * Eric Dan ([EMAIL PROTECTED]) wrote: trying to install 6.1 on my secondary master partition or slice 2. I come from linux so please be forgiving with the naming or slices and partitions. i created a 40G slice on ad3 with fdisk, then with disklabel i created a 4g / a 512M swap and the rest for /home i used the S option on the / partition. the installer gives me and error saying that it wasn't able to create the partions on the slice and the install aborts. what can i do? i don't wanna give up that ext3 part on this drive. thanks -- Eric Dan [EMAIL PROTECTED] UCLA ID#103297286 http://www.vladuz976.com/ GPG key: FD13E94D ( B9D1 7D8D 34E0 D0B7 D3C9 4571 0BAC 1DC7 FD13 E94D) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Eric Dan [EMAIL PROTECTED] UCLA ID#103297286 http://www.vladuz976.com/ GPG key: FD13E94D ( B9D1 7D8D 34E0 D0B7 D3C9 4571 0BAC 1DC7 FD13 E94D) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: pkg_add gnuplot
On Friday 05 May 2006 13:00, Jonathan Herriott wrote: Hey, I'm trying to add the package gnuplot, and when I do, it goes and tries to add another necessary package pdflib. The issue is that it cannot find pdflib. I get the following: pkg_add -r gnuplot Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6.0-release/Latest/gn uplot.tbz... Done. Error: FTP Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6.0-release/All/pdfli b-6.0.1_2.tbz: File unavailable (e.g., file not found, no access) pkg_add: can't open dependency file '/var/db/pkg/pdflib-6.0.1_2/+REQUIRED_BY '! dependency registration is incomplete For some reason the file does not exist on the server. Is there another method that I can get pdflib that pkg_add will recognize for when I pkg_add -r gnuplot again? google pdflib to find some available .tbz :-) Good luck -- Best Regards Yuan, Jue @ www.yuanjue.net ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Memory exhausted when compiling SUN Java JDK 15
Hi: I tried to compile the new jdk15 on 6.1-RC1, but it stops while compiling ad_i486.cpp with a memory exhausted error. I have more than 3GB disk, 512MB swap but only 112MB RAM, I have monitored with top and found that no more than 150MB swap is used. I guess the RAM gets exhausted, how much is needed? Is it possible to build jdk without the browser extensions and then build that separately? - not that I think it helps, but maybe. Thanks, Erik output from make: # make WITH_MOZILLA=firefox === Building for jdk-1.5.0p3 # Start of jdk build ... ... Target Build Versions: JAVAWS_VERSION = 1.5.0 MILESTONE = p3 BUILD_NUMBER = norgaard_04_may_2006_19_29 Bootstrap Settings: BOOTDIR = /usr/local/jdk1.4.2 BOOTSTRAP J2SDK VERSION: 1.4.2-p8 OUTPUTDIR = /usr/ports/java/jdk15/work/control/build/bsd-i586 Build Tool Settings: UNIXCOMMAND_PATH = /bin/ COMPILER_PATH = /usr/bin/ DEVTOOLS_PATH = /usr/local/bin/ USRBIN_PATH = /usr/bin/ MOTIF_DIR = /usr/X11R6 CC_VER = 3.4.4 ZIP_VER = 2.31 PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bi n:/usr/X11R6/bin:/root/bin TMPDIR = /usr/ports/java/jdk15/work/control/build/bsd-i586/tmp Build Directives: USE_ONLY_BOOTDIR_TOOLS = USE_HOTSPOT_INTERPRETER_MODE = PEDANTIC = DEV_ONLY = J2RE_ONLY = NO_DOCS = NO_IMAGES = TOOLS_ONLY = INSANE = PARALLEL_COMPILES = false PARALLEL_COMPILE_JOBS = 2 FASTDEBUG = false INCREMENTAL_BUILD = false Build Platform Settings: PLATFORM = bsd ARCH = i586 LIBARCH = i386 ARCH_FAMILY = i586 ARCH_DATA_MODEL = 32 TRUE_PLATFORM = FreeBSD OS_VERSION = 6.1-RC FREE_SPACE = 6508524 GNU Make Settings: MAKE = gmake MAKE VERSION = MAKECMDGOALS = sanity MAKEFLAGS = SHELL = /bin/sh Target Build Versions: JDK_VERSION = 1.5.0 MILESTONE = p3 BUILD_NUMBER = norgaard_04_may_2006_19_29 External File/Binary Locations: HOTSPOT_SERVER_PATH = /usr/ports/java/jdk15/work/control/build/bsd-i586/hotspot-i586/server HOTSPOT_CLIENT_PATH = /usr/ports/java/jdk15/work/control/build/bsd-i586/hotspot-i586/client HOTSPOT_IMPORT_PATH = /usr/ports/java/jdk15/work/control/build/bsd-i586/hotspot-i586/import MOTIF_DIR = /usr/X11R6 CACERTS_FILE = ./../src/share/lib/security/cacerts ... ... gmake[3]: Entering directory `/usr/ports/java/jdk15/work/control/build/bsd-i586/hotspot-i586/tmp/bsd_i486_compiler2/jvmg' Compiling ../generated/adfiles/ad_i486.cpp virtual memory exhausted: Cannot allocate memory gmake[3]: *** [ad_i486.o] Error 1 gmake[3]: Leaving directory `/usr/ports/java/jdk15/work/control/build/bsd-i586/hotspot-i586/tmp/bsd_i486_compiler2/jvmg' gmake[2]: *** [the_vm] Error 2 gmake[2]: Leaving directory `/usr/ports/java/jdk15/work/control/build/bsd-i586/hotspot-i586/tmp/bsd_i486_compiler2/jvmg' gmake[1]: *** [jvmg] Error 2 gmake[1]: Leaving directory `/usr/ports/java/jdk15/work/control/build/bsd-i586/hotspot-i586/tmp' gmake: *** [jvmg] Error 2 *** Error code 2 Stop in /usr/ports/java/jdk15. -- Ph: +34.666334818 web: www.locolomo.org S/MIME Certificate: www.daemonsecurity.com/ca/8D03551FFCE04F0C.crt Subject ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 Fingerprint: 7F:80:96:EA:95:92:E2:23:1F:FA:0F:98:92:C2:CC:55:6B:9A:8C:92 smime.p7s Description: S/MIME Cryptographic Signature
i/o error OOo-2.0.2 NFS
Yesterday I installed OpenOffice-2.0.2 from (the most recent) ports. It runs very well, but I have an error that I don't understand. Opening a file on my local machine is OK, but when I try to open one on a NFS mounted directory I get an I/O general error and the file is not opened. I run OOo-1.1.5 on the same machine without any problems. Any ideas where (what) to look (for)? -- dick -- http://nagual.st/ -- PGP/GnuPG key: F86289CE ++ Running FreeBSD 6.1 ++ The Power to Serve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: quota deadlock on 6.1-RC1
On 05 May Pawel Jakub Dawidek wrote: It isn't good to release a software with known, documented bugs, but its better than shipping an untested software with god-one-knows unknown bugs. Very well said. Hear hear. EOD? ;-) -- dick -- http://nagual.st/ -- PGP/GnuPG key: F86289CE ++ Running FreeBSD 6.1 ++ The Power to Serve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: add DVD Burner and file system setup?
Sean [EMAIL PROTECTED] wrote: David Kelly wrote: On Thu, May 04, 2006 at 01:54:37PM -0400, Sean wrote: I just added a DVD burner to my system and am trying to figure out how to setup the fstab. The device is showing up on acd1 but what file system type should be specified? This is typical of what sysinstall writes if a CD/DVD is found during installation: /dev/acd0 /cdrom cd9660 ro,noauto 0 0 The line isn't necessary, but it makes mounting optical media as simple as sudo mount /cdrom and sudo umount /cdrom assuming your filesystem is ISO-9660. Thanks, that is what I had done, but was wondering if I had to do anything different for a DVD. I recall that a region code also has to be set? The region code is probably already set, but players can ignore it unless the author signed a CSS license agreement. Free software authors rarely do that, but some players respect the region code anyway. If you use mplayer you can ignore the region code settings of your drive. It will play discs from all around the world. Fabian -- http://www.fabiankeil.de/ signature.asc Description: PGP signature
Re: FreeBSD 6.0 compat with DL320 G4
Hi Ted, Great news! but as per your patch you can only use the second nic? Cheers, Will On 05/05/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote: Hi William, I was able to create a patch that fixed the problem, see here: http://www.freebsd.org/cgi/query-pr.cgi?pr=96806 Ted -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of William Sent: Wednesday, May 03, 2006 1:41 AM To: Ted Mittelstaedt Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD 6.0 compat with DL320 G4 The chances of getting it returned because fbsd doesnt work are very small! :( On 03/05/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote: I have a DL320 G4 in the rack and the thing panics under 6.1-RC1 when more than a few K of data is sent over the bge interface. I haven't tried 6.0-RELEASE on it. Just make sure you can return it if it doesen't work. Ted -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of William Sent: Tuesday, May 02, 2006 3:10 AM To: freebsd-questions@freebsd.org Subject: Re: FreeBSD 6.0 compat with DL320 G4 What was your experience like with 6.0-RELEASE and the dl320 g4? I've had a quote back on that model so could be near to actually getting some hardware for once :) On 30/04/06, [EMAIL PROTECTED]@mgEDV.net [EMAIL PROTECTED] wrote: just for info: our dl320 g4 also has bge interfaces, and they work very well under 6.1-RC1 (even BETA4 was ok). but our server has been bought 2 months ago, maybe there's a newer/different chipset in it. we also have a dl320 g2 being heavily used as lan switches monitor, this server also has bge interfaces and had no problem since 1 year capturing and analyzing more than 26GB/day (avg) of nw-data on the 2nd interface and serving more than 4GB/day (avg) on the primary one (both IPv4 only). c ya ;-) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.5.1/328 - Release Date: 5/1/2006 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.5.1/328 - Release Date: 5/1/2006 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problem with cordless mouse/Keyboard combo set
I am attempting to use my Omni cordless mouse and keyboard set - these both connect with the same receiver, which plugs into the computer with a single USB cable. The keyboard works fine - the mouse, however, does not work at all. It does not move the cursor, and clicks aren't registered. Testing with a different (corded) USB mouse works well. For what reasons might two devices on the same physical connection give this discrepency in workingness? Is such a setup simply not supported, or otherwise is there anything I can do to find out more about what's going on here? -- Lennon Victor Cook He who receives an idea from me receives without lessening, as he who lights his candle at mine receives light without darkening - Thomas Jefferson ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Quota and webmail
Hello everyone, I'm on FreeBSD 4.8R Latest sendmail is the default MTA, and latest Openwebmail is the webmail client. Quota has been enabled in my kernel The problem is whenever I set the quota limit and configure openwebmail to read the unix quota limit, then it reads the limit of the account user which located in /home/user but ignores the /var/mail/user limit. yes there is away in openwebmail to makes it reads both /home/user and /var/mail/user but it will be seperated limits not as a total 1 box limit. Is there away, script or any solution PLEASE to make the kernel quota reads the /home/user and adds to it /var/mail/user and the result comes as 1 size limit? 1 box limit? a link in the user home directory to /var/mail/user will do it? How would we do this please. Marwan _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: i/o error OOo-2.0.2 NFS
dick hoogendijk [EMAIL PROTECTED] wrote: Yesterday I installed OpenOffice-2.0.2 from (the most recent) ports. It runs very well, but I have an error that I don't understand. Opening a file on my local machine is OK, but when I try to open one on a NFS mounted directory I get an I/O general error and the file is not opened. I run OOo-1.1.5 on the same machine without any problems. Any ideas where (what) to look (for)? man rpc.lockd (Just a guess, I don't use OpenOffice). Fabian -- http://www.fabiankeil.de/ signature.asc Description: PGP signature
Re: Why do I have to keep doing portsnap extract?
On Friday 05 May 2006 01:06, Peggy Wilkins wrote: On 5/4/06, Colin Percival [EMAIL PROTECTED] wrote: Peggy Wilkins wrote: On 5/4/06, Jason Morgan [EMAIL PROTECTED] wrote: Did you run `extract' after your original `fetch'? Yes, I did; I followed the instructions exactly. I ran portsnap for the first time a couple weeks ago after which I successfully did a bunch of portupgrades. Then the ports tree sat there on my disk untouched for a couple of weeks until I ran portsnap fetch update today. For some reason it insisted that I needed to run extract when as far as I can tell that shouldn't have been necessary. Do you have a .portsnap.INDEX file in your ports tree? Yes; I don't know if it was there before I ran portsnap today, though. -rw-r--r-- 1 root wheel 1230186 May 4 16:39 .portsnap.INDEX plw ___ Have you stopped using cvsup for updating your ports? If you do, you're going to have to use extract the next time you use portsnap. Don ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
help me
hy everyone.I am an FreeBSD user ,i use it every day ,but a few days ago a problem came up.I have tryed to install Firewalk 5.0.2 ,but told me that I must install libnet 1.1.2.1,1.OK i have installed libnet 1.1.2.1,1 ,but Firewalk stiil tolds that I do not have installed libnet.What should I do? P.S. for the installation of libnet i used ./configure make make install ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problem using geom to mirror system
I am following the doc at http://people.freebsd.org/~rse/mirror/ While using Approach 2, the initial dump and reboot using the new gm0 mirror worked fine, but having a problem trying to add my da0 drive to the mirror after the reboot. Can someone suggest what I've done wrong? files# gmirror configure -a gm0s1 No such device: gm0s1. files# df -h Filesystem SizeUsed Avail Capacity Mounted on /dev/mirror/gm0s1a 8.3G1.2G6.4G16%/ devfs 1.0K1.0K 0B 100%/dev /dev/mirror/datas1a 33G4.0K 30G 0%/data files# ls -lah /dev/mirror/ total 1 dr-xr-xr-x 2 root wheel 512 Dec 31 1969 . dr-xr-xr-x 5 root wheel 512 Dec 31 1969 .. crw-r- 1 root operator0, 116 May 4 23:43 data crw-r- 1 root operator0, 118 May 4 23:43 datas1 crw-r- 1 root operator0, 121 May 4 19:43 datas1a crw-r- 1 root operator0, 122 May 4 23:43 datas1c crw-r- 1 root operator0, 109 May 4 23:43 gm0 crw-r- 1 root operator0, 117 May 4 23:43 gm0s1 crw-r- 1 root operator0, 119 May 4 19:43 gm0s1a crw-r- 1 root operator0, 120 May 4 23:43 gm0s1c files# dmesg|grep gm0 GEOM_MIRROR: Device gm0 created (id=982386906). GEOM_MIRROR: Device gm0: provider da1 detected. GEOM_MIRROR: Device gm0: provider da1 activated. GEOM_MIRROR: Device gm0: provider mirror/gm0 launched. Trying to mount root from ufs:/dev/mirror/gm0s1a -- Robert ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
IPsec with racoon2
Hi,
I'm trying to get IPsec running between 2 FreeBSD (VMware) boxes, using
racoon2.
spmd and iked start up okay, but I get an error when I try a ping across
the tunnel.
/var/log/messages shows:
May 5 13:52:36 biosa-vm4 iked: [INTERNAL_ERR]: if_spmd.c:726: SLID
failed: 550 Operation failed
May 5 13:52:36 biosa-vm4 iked: [INTERNAL_ERR]:
isakmp.c:647:isakmp_initiate_cont(): 0:172.20.36.55[0] -
172.20.36.52[0]:0x0:can't find selector (index (null))
2006-05-05 13:53:54 [INFO]: main.c:269:main(): starting iked for racoon2
20051102a
2006-05-05 13:53:54 [INFO]: main.c:272:main(): OPENSSLDIR: /etc/ssl
2006-05-05 13:53:54 [INFO]: main.c:282:main(): reading config
/usr/local/etc/racoon2.conf
2006-05-05 13:53:54 [DEBUG]:
ike_conf.c:3247:ike_conf_check_consistency(): checking configuration
2006-05-05 13:53:54 [DEBUG]: if_spmd.c:350: spmd I/F connection ok: 220
F8A..76C2B9
2006-05-05 13:53:54 [DEBUG]: cfsetup.c:3306:
spmd_read_password_file([/usr/local/etc/racoon2/spmd.pwd],
[cfsetup.c:3376], 1)
2006-05-05 13:53:54 [DEBUG]: cfsetup.c:3351: read 16 bytes
2006-05-05 13:53:54 [DEBUG]: if_spmd.c:413: spmd LOGIN ok: 250 OK
2006-05-05 13:53:54 [INFO]: isakmp.c:339:isakmp_open(): socket 5 bind
172.20.36.55[500]
Heres my network: (Running under vmware on Linux) The host has 2 network
cards and they're functional from vmware.
ifconfig_lnc0=inet 172.20.36.55 netmask 0xf800
ifconfig_lnc1=inet 192.168.4.1 netmask 0xff00
# ___ ___
#/ Ext IP A.B.C.D\tunnel / Ext IP W.X.Y.Z\
# ---| Int IP 192.168.1.1/24 |===| Int IP 192.168.4.1/24 |---
#\___/ \___/
# For host A.B.C.D
# gif_interfaces=gif0
# gifconfig_gif0=A.B.C.D W.X.Y.Z
# ifconfig_gif0=inet 192.168.1.1 192.168.4.1 netmask 0x
# static_routes=vpn
# route_vpn=-net 192.168.4.0/24 192.168.4.1
gif_interfaces=gif0
gifconfig_gif0=172.20.36.55 172.20.36.52
ifconfig_gif0=inet 192.168.4.1 192.168.1.1 netmask 0x
static_routes=vpn
route_vpn=-net 192.168.1.0/24 192.168.1.1
Without IPsec running, I can ping the remote interfaces 192.168.[14].1
both ways
My racoon2.conf looks like:
setval {
PSKDIR /usr/local/etc/racoon2/psk;
CERTDIR /usr/local/etc/racoon2/cert;
};
# interface info
interface
{
ike {
MY_IPV4%lnc0;
};
spmd {
unix /var/run/racoon/spmif;
};
spmd_password /usr/local/etc/racoon2/spmd.pwd;
};
# resolver info
resolver
{
resolver off;
};
#
# default section
#
default
{
remote {
ikev2 {
logmode normal;
kmp_sa_lifetime_time infinite;
kmp_sa_lifetime_byte infinite;
max_retry_to_send 3;
interval_to_send 10 sec;
times_per_send 1;
kmp_sa_nego_time_limit 60 sec;
ipsec_sa_nego_time_limit 40 sec;
kmp_enc_alg { aes256_cbc; 3des_cbc; };
kmp_hash_alg { hmac_sha1; hmac_md5; aes_xcbc; };
kmp_auth_method { dss; };
kmp_dh_group { 1; 2; 5; 14; 15; };
random_pad_content on;
random_padlen on;
max_padlen 50 bytes;
};
};
policy {
ipsec_mode tunnel;
ipsec_level unique; # Not Yet Implemented, always 'unique'
};
ipsec {
ipsec_sa_lifetime_time infinite;
ipsec_sa_lifetime_byte infinite;
};
sa {
esp_enc_alg { aes128_cbc; 3des_cbc; };
esp_auth_alg { hmac_sha1; hmac_md5; };
};
};
ipsec ipsec_ah_esp {
ipsec_sa_lifetime_time 28800 sec;
sa_index { ah_01; esp_01; };
};
ipsec ipsec_esp {
ipsec_sa_lifetime_time 28800 sec;
sa_index esp_01;
};
sa ah_01 {
sa_protocol ah;
ah_auth_alg { hmac_sha1; hmac_md5; };
};
sa esp_01 {
sa_protocol esp;
esp_enc_alg { aes128_cbc; 3des_cbc; };
esp_auth_alg { hmac_sha1; hmac_md5; };
};
# biosa-vm1.ch.genedata.com
remote biosa-vm1.nowhere.com {
acceptable_kmp { ikev2; };
ikev2 {
my_id fqdn biosa-vm4.nowhere.com;
peers_id fqdn biosa-vm1.nowhere.com;
peers_ipaddr 172.20.36.52 port 500;
kmp_enc_alg { aes256_cbc; aes192_cbc; 3des_cbc; };
kmp_prf_alg { hmac_md5; hmac_sha1; aes128_cbc; };
kmp_hash_alg { hmac_md5; hmac_sha1; aes_xcbc; };
kmp_dh_group { 5; };
kmp_auth_method { psk; };
pre_shared_key ${PSKDIR}/secret.psk;
};
selector_index 42;
};
selector 41 {
direction outbound;
src 172.20.36.55;
dst 172.20.36.52;
upper_layer_protocol
Re: help me
On Fri, May 05, 2006 at 03:09:54PM +0300, astalus razvan wrote: P.S. for the installation of libnet i used ./configure make make install Why didn't you use the port: /usr/ports/net/libnet ? -- Riemer PalstraAmsterdam, The Netherlands [EMAIL PROTECTED]http://www.palstra.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
installing on lsi sata 150-6
When I try to install Freebsd on LSI sata 150-6 mirror volumes with 5.4 or
6.0 media, I get the same No root device found - you must label a
partition as / in label editor. The slice was allocated and labels
created in both cases. If I try to write the changes from the label menu,
I get unable to find /dev/amrd0s1{a,b,c,d}. If I allocate a separate
slice for each partition, the same thing happens, only the device names
change slightly.
The volumes themselves get detected properly at install boot and all show
up in both slice and label menus. oh what to do, what to do ? Does
anyone have root residing on one of these controller volumes ?
Thank you all.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: help me
On Friday 05 May 2006 20:09, astalus razvan wrote: hy everyone.I am an FreeBSD user ,i use it every day ,but a few days ago a problem came up.I have tryed to install Firewalk 5.0.2 ,but told me that I must install libnet 1.1.2.1,1.OK i have installed libnet 1.1.2.1,1 ,but Firewalk stiil tolds that I do not have installed libnet.What should I do? P.S. for the installation of libnet i used ./configure make make install Hi. Why not use port to intall libnet? HTH ;-) -- Best Regards Yuan, Jue @ www.yuanjue.net ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Substitute command on vi
Hi list, I need to substitute a lot of characters ^M (ctrl+M) at the end of each line in my file. The command :%s/^M//g insn't have success. How can i do it ? Thanks, Aguiar ___ Abra sua conta no Yahoo! Mail: 1GB de espaço, alertas de e-mail no celular e anti-spam realmente eficaz. http://br.info.mail.yahoo.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 6.1 install problems with creating partitions
Eric Dan wrote: update: I actually backed up the ext3 to another hard drive and got rid of all partitions and slices on that drive. installer still can't do it. the exact error says: unable to make new root file system on ad3sa1 then i hit return and it says: couldn't make file system properly any ideas? * Eric Dan ([EMAIL PROTECTED]) wrote: trying to install 6.1 on my secondary master partition or slice 2. I come from linux so please be forgiving with the naming or slices and partitions. i created a 40G slice on ad3 with fdisk, then with disklabel i created a 4g /a 512M swap and the rest for /home i used the S option on the / partition. You may need to drop some more assumptions that you are bringing from the Linux world -- you seem to be trying to manually impose the Linux way of dividing up the space, but that is really not what a typical FreeBSD partition/slice scheme looks like. As long as you have essentially wiped the drive already, you can use the FreeBSD installer's Auto Defaults option to get a look at what the installer is expecting you to do, and then tune that as desired. On the FDISK screen, press A to use the whole disk, then on the Disklabel screen press A again for Auto Defaults. Or, have a closer look at the handbook for more details, http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/install-steps.html (esp. figure 2-22) -- Greg Barniskis, Computer Systems Integrator South Central Library System (SCLS) Library Interchange Network (LINK) gregb at scls.lib.wi.us, (608) 266-6348 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Substitute command on vi
El día Friday, May 05, 2006 a las 10:12:02AM -0300, Aguiar Magalhaes escribió: Hi list, I need to substitute a lot of characters ^M (ctrl+M) at the end of each line in my file. The command :%s/^M//g insn't have success. How can i do it ? :1,$s-.$-- matthias -- Matthias Apitz Manager Technical Support - OCLC PICA GmbH Gruenwalder Weg 28g - 82041 Oberhaching - Germany t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e [EMAIL PROTECTED] - w http://www.oclcpica.org/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Substitute command on vi
On Fri, May 05, 2006 at 10:12:02AM -0300, Aguiar Magalhaes wrote: I need to substitute a lot of characters ^M (ctrl+M) at the end of each line in my file. You might wanna give dos2unix a try: /usr/local/bin/dos2unix The command :%s/^M//g insn't have success. Is this a shift+6 M, or a ctrl+V ctrl+M? The last one should work. -- Riemer PalstraAmsterdam, The Netherlands [EMAIL PROTECTED]http://www.palstra.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Substitute command on vi
On 2006-05-05 10:12, Aguiar Magalhaes [EMAIL PROTECTED] wrote: Hi list, I need to substitute a lot of characters ^M (ctrl+M) at the end of each line in my file. The command :%s/^M//g insn't have success. The command looks fine, except for a tiny detail: Make sure you use ^V ^M to insert a *literal* ^M character in the match pattern, instead of two different characters '^' and 'M'. Then it should work. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ipfirewall tricks
On second look PF has some definite improvements over IPFilter. My rule set file is half as long for one thing. I like the macros and tables. I'm still reading throught he documentation, but, I have not figured out why the log doesnt seem to be working yet. I have all the required entries in rc.conf. pf_enable=YES # Enable PF (load module if required) pf_rules=/etc/pf.conf # rules definition file for pf pf_flags= # additional flags for pfctl startup pflog_enable=YES # start pflogd(8) pflog_logfile=/var/log/pflog # where pflogd should store the logfile pflog_flags= # additional flags for pflogd startup Handbook at http://www.openbsd.org/faq/pf/. seems to indicate I need a device named pflog0 which I do not have. Also pflogd does not start on boot even tough it is listed in rc.conf. Perhaps the start up script did not get installed into the correct location. My installatin was from the 6.0 release ISO. so I would naturally assume it is correct. Thanks for the reminder of this program. I think I will like it better than the others for my purposes and administrative skill level. On 5/2/06, Atom Powers [EMAIL PROTECTED] wrote: On 5/2/06, Bryan Curl [EMAIL PROTECTED] wrote: I want to limit time my kids spend on the internet. The way I am doing it is to make varying, seperate ipf.rules files and install them from cron at the appropriate time. Problem is, if I make a change to one file, I generally have to update all the others accordingly. Is there a better way? I have read man ipf but didnt come out with any ideas. I would use pf and have something like this: pf.conf block out all from kids to any crontab pfctl -t kids -T add kids.ip.to.block pfctl -t kids -T del kids.ip.to.allow You can also keep the IPs in a flat file and just tell pf to re-read the file (or read a different file) to update the table. I love pf. -- -- Perfection is just a word I use occasionally with mustard. --Atom Powers-- -- -- Bryan bc3910 'at' gmail 'dot' com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ACPI Eror
Hi there, I just installed FreeBSD-5.4-Release on my Toshiba Satellite A105 laptop and keep getting this rather annoying error every so often ACPI-0370: *** Error: No installed handler for fixed event [0004] I Googled around and seems as though the best remedy is to just upgrade to FreeBSD-6.0. Is there any way around this (error) or should I just go ahead and upgrade to 6.0 ?? Thanks for the help. -Ma ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
BSD equiv of /proc?
I have a proc filesystem on my computer, but it's empty. I'm used to linux, where you can do stuff like 'cat /proc/cpuinfo' to get information about the system. What is the BSD equivalent of this, or is it /proc, and I'm just missing something? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Software RAID guidance
Robert Fitzpatrick wrote: I have an old NT4 PIII here that has a pair Adaptec Array1000 Family controllers with 2 pairs of identical drives on one of them (2 IBM 9GB and 2 Seagate 35GB). From what I googled, *nix does not support the controller, so I have removed the RAID arrays and loaded FreeBSD 6.0 onto the two IBM drives. Now, I wanted to mirror the other two for data and looking for guidance as to whether it is first of all suited for software RAID and if so, CCD or vinum. I am contemplating vinum because the handbook mentions CCD is when cost is the important factor and for me, is reliability. What would someone suggest? If vinum, one thing I don't quite understand is do I create the partitions to be used in the device? There doesn't seem to be a man for gvinum and the link to it in the handbook section 19.6.1 is broken. Hi Robert, I use gmirror(8) to setup RAID 1 volumes. I've used it successfully with IDE, SCSI and SATA drives. It is very simple to setup and administration is easy. If you only need RAID 1, then you should try it out. Should you need RAID 5 and/or a fully fledged volume manager, then vinum is the way. I also wrote a document on gmirror(8) setup. If you're interested, I can share it with you. David FYI: man page URLs gmirror(8) http://www.freebsd.org/cgi/man.cgi?query=gmirrorapropos=0sektion=0manpath=FreeBSD+6.0-RELEASE+and+Portsformat=html vinum(4) http://www.freebsd.org/cgi/man.cgi?query=vinumapropos=0sektion=0manpath=FreeBSD+6.0-RELEASE+and+Portsformat=html -- David Robillard UNIX systems administrator, CISSP Montreal: +1 514 966 0122 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: BSD equiv of /proc?
In the last episode (May 05), Jim Stapleton said: I have a proc filesystem on my computer, but it's empty. I'm used to linux, where you can do stuff like 'cat /proc/cpuinfo' to get information about the system. What is the BSD equivalent of this, or is it /proc, and I'm just missing something? FreeBSD uses /proc for process-related stuff only. System stats are retrieved using the sysctl command. Try running sysctl -a and see if anything's useful. -- Dan Nelson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
portmanager install from packages (please)
Hi, I've lately been using portmanager on my build host, instead of portupgrade, to rebuild ports and produce packages and I'm impressed. But now I want more... It seems to me that one of the greatest benefits of portmanager is that it is a compiled executable, and thus doesn't rely on Ruby. In our environment, where ports are built on one machine and then installed from packages on others, it would make a lot of sense if I didn't have to install Ruby just so that I can run portupgrade. All I really want to do is put the new packages on the machine and upgrade from those, using a single binary that doesn't require extra support. But, brilliant though it is, I can't do this with portmanager. Now, it occurs to me that I could just do something as simple as run pkg_delete/pkg_add against the most recently available packages, but I'm sure I'd risk breaking something on a critical host. Extending portmanager to perform this function seems logical. cheers, -- Joel Hatton -- Infrastructure Manager | Hotline: +61 7 3365 4417 AusCERT - Australia's national CERT | Fax: +61 7 3365 7031 The University of Queensland| WWW: www.auscert.org.au Qld 4072 Australia | Email: [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: BSD equiv of /proc?
On Fri, 5 May 2006 10:07:03 -0400 Jim Stapleton [EMAIL PROTECTED] wrote: I have a proc filesystem on my computer, but it's empty. I'm used to linux, where you can do stuff like 'cat /proc/cpuinfo' to get information about the system. What is the BSD equivalent of this, or is it /proc, and I'm just missing something? If you absolutely can't live without /proc, install the linuxulator and mount linproc. It will give you a linux compatible /proc. -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: BSD equiv of /proc?
Will that only work for Linux programs? Jeff. On 05/05/06, Bill Moran [EMAIL PROTECTED] wrote: On Fri, 5 May 2006 10:07:03 -0400 Jim Stapleton [EMAIL PROTECTED] wrote: I have a proc filesystem on my computer, but it's empty. I'm used to linux, where you can do stuff like 'cat /proc/cpuinfo' to get information about the system. What is the BSD equivalent of this, or is it /proc, and I'm just missing something? If you absolutely can't live without /proc, install the linuxulator and mount linproc. It will give you a linux compatible /proc. -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- -- Argument against Linux number 6,033: ...So this is like most Linux viruses. You have to download the virus yourself, become root, install it and then run it. Seems like a lot of work just to experience what you can get on Windows with a lot less trouble. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: BSD equiv of /proc?
Jim Stapleton wrote: I have a proc filesystem on my computer, but it's empty. I'm used to linux, where you can do stuff like 'cat /proc/cpuinfo' to get information about the system. What is the BSD equivalent of this, or is it /proc, and I'm just missing something? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] IIRC try : mount -t linprocfs none /proc and then check /proc out. Also look at man mount_linprocfs -- Regards, Eric ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
lint not working
Hi all, I would like to try using lint to test some code I am working on but I get the following error whenever I run it on any C file: lint: cannot find llib-lc.ln sure enough if I look in /usr/libdata/lint/ there are only llib-lposix.ln llib-lstdc.ln files in there. Googling I found that I can generate the lint libraries if I set WANT_LINT = yes in my make.conf, but that implies I need to re-build everything in order to generate the lint libs. Is there a way to generate and install them without re-building everything? Thanks Rich ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: FreeBSD 6.0 compat with DL320 G4
Yes, for some reason the first nic locks the system up when you try to bring it up. Ted -Original Message- From: William [mailto:[EMAIL PROTECTED] Sent: Friday, May 05, 2006 2:39 AM To: Ted Mittelstaedt Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD 6.0 compat with DL320 G4 Hi Ted, Great news! but as per your patch you can only use the second nic? Cheers, Will On 05/05/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote: Hi William, I was able to create a patch that fixed the problem, see here: http://www.freebsd.org/cgi/query-pr.cgi?pr=96806 Ted -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of William Sent: Wednesday, May 03, 2006 1:41 AM To: Ted Mittelstaedt Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD 6.0 compat with DL320 G4 The chances of getting it returned because fbsd doesnt work are very small! :( On 03/05/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote: I have a DL320 G4 in the rack and the thing panics under 6.1-RC1 when more than a few K of data is sent over the bge interface. I haven't tried 6.0-RELEASE on it. Just make sure you can return it if it doesen't work. Ted -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of William Sent: Tuesday, May 02, 2006 3:10 AM To: freebsd-questions@freebsd.org Subject: Re: FreeBSD 6.0 compat with DL320 G4 What was your experience like with 6.0-RELEASE and the dl320 g4? I've had a quote back on that model so could be near to actually getting some hardware for once :) On 30/04/06, [EMAIL PROTECTED]@mgEDV.net [EMAIL PROTECTED] wrote: just for info: our dl320 g4 also has bge interfaces, and they work very well under 6.1-RC1 (even BETA4 was ok). but our server has been bought 2 months ago, maybe there's a newer/different chipset in it. we also have a dl320 g2 being heavily used as lan switches monitor, this server also has bge interfaces and had no problem since 1 year capturing and analyzing more than 26GB/day (avg) of nw-data on the 2nd interface and serving more than 4GB/day (avg) on the primary one (both IPv4 only). c ya ;-) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.5.1/328 - Release Date: 5/1/2006 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.5.1/328 - Release Date: 5/1/2006 -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 5/3/2006 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
panic: page fault - 6.0-RELEASE-p7
Hello,
We have a group of web and mail servers that run under a moderate
load. We recently upgraded them from 4/5.x to 6.0. While we thought
we had done enough testing, apparently we hadn't and are now
experiencing panic's on a number of the servers. Some of our more
heavily loaded servers have been fine for days, while others will
crash every 6 to 36 hours. Below are some pieces of information that
may be helpful.
Should I be posting this to another list as well?
I know I can decrease NMBCLUSTERS dramatically, and give more memory
to the kernel if that would help.
I've read a number of similar cases where this panic was related to a
hardware failure, and while I can't rule that out completely, it does
seem unusual that several servers are apparently having the same
problem. Could it be that hardware problems existed before the
upgrade, but are now brought out by the increased load caused by the
new OS version and other installed software? We have IPMI cards in
some of the crashing servers and they all report normal temperatures,
fan speeds, and voltages. Nothing unusual in the event logs.
I'm willing to dig deeper and do more testing if anyone has suggestions.
Differences from GENERIC:
--
#cpuI486_CPU
#cpuI586_CPU
cpu I686_CPU
ident PAYMAIL
options SUIDDIR
options QUOTA
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=10
options NMBCLUSTERS=65536
options KVA_PAGES=640
options VM_KMEM_SIZE_MAX=(512*1048576)
options VM_KMEM_SIZE_SCALE=2
options ASR_COMPAT
options SHMMAXPGS=131072
options SEMMNI=128
options SEMMNS=512
options SEMUME=100
options SEMMNU=256
--
--
mail-da-2# kgdb /boot/kernel/kernel.debug vmcore.2
[GDB will not be able to debug user-mode threads:
/usr/lib/libthread_db.so: Undefined symbol ps_pglobal_lookup]
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type show copying to see the conditions.
There is absolutely no warranty for GDB. Type show warranty for details.
This GDB was configured as i386-marcel-freebsd.
Unread portion of the kernel message buffer:
ber = 12
panic: page fault
Uptime: 1d6h4m36s
Dumping 2047 MB (3 chunks)
chunk 0: 1MB (158 pages) ... ok
chunk 1: 2046MB (523773 pages) 2031 2015 1999 1983 1967 1951 1935
1919 1903 1887 1871 1855 1839 1823 1807 1791 1775 1759 1743 1727 1711
1695 1679 1663 1647 1631 1615 1599 1583 1567 1551 1535 1519 1503 1487
1471 1455 1439 1423 1407 1391 1375 1359 1343 1327 1311 1295 1279 1263
1247 1231 1215 1199 1183 1167 1151 1135 1119 1103 1087 1071 1055 1039
1023 1007 991 975 959 943 927 911 895 879 863 847 831 815 799 783 767
751 735 719 703 687 671 655 639 623 607 591 575 559 543 527 511 495
479 463 447 431 415 399 383 367 351 335 319 303 287 271 255 239 223
207 191 175 159 143 127 111 95 79 63 47 31 15 ... ok
chunk 2: 1MB (128 pages)
#0 doadump () at pcpu.h:165
165 pcpu.h: No such file or directory.
in pcpu.h
(kgdb) bt
#0 doadump () at pcpu.h:165
#1 0x606384aa in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:399
#2 0x60638740 in panic (fmt=0x6085598b %s) at
/usr/src/sys/kern/kern_shutdown.c:555
#3 0x6080ebf8 in trap_fatal (frame=0x9c497ad8, eva=172) at
/usr/src/sys/i386/i386/trap.c:831
#4 0x6080e963 in trap_pfault (frame=0x9c497ad8, usermode=0, eva=172)
at /usr/src/sys/i386/i386/trap.c:742
#5 0x6080e5c1 in trap (frame=
{tf_fs = 1692663816, tf_es = 1680080936, tf_ds = 40, tf_edi =
55, tf_esi = 0, tf_ebp = -1672905932, tf_isp = -1672905980, tf_ebx =
-1672905584, tf_edx = 1677080448, tf_ecx = 0, tf_eax = 4, tf_trapno =
12, tf_err = 2, tf_eip = 1617791092, tf_cs = 32, tf_eflags = 66182,
tf_esp = 1773435648, tf_ss = 0}) at /usr/src/sys/i386/i386/trap.c:432
#6 0x607fe6aa in calltrap () at /usr/src/sys/i386/i386/exception.s:139
#7 0x606d8874 in ip_ctloutput (so=0x4, sopt=0x9c497c90) at atomic.h:146
#8 0x606e88ef in tcp_ctloutput (so=0x64e419bc, sopt=0x9c497c90) at
/usr/src/sys/netinet/tcp_usrreq.c:1036
#9 0x60671c00 in sosetopt (so=0x64e419bc, sopt=0x9c497c90) at
/usr/src/sys/kern/uipc_socket.c:1553
#10 0x60676e5d in kern_setsockopt (td=0x63f63780, s=0, level=4,
name=4, val=0x63f63780, valseg=UIO_USERSPACE, valsize=0)
at /usr/src/sys/kern/uipc_syscalls.c:1331
#11 0x60676d8e in setsockopt (td=0x63f63780, uap=0x4) at
/usr/src/sys/kern/uipc_syscalls.c:1287
#12 0x6080ef0f in syscall (frame=
{tf_fs = 1606352955, tf_es = 59, tf_ds = 1606352955, tf_edi =
1606413432, tf_esi = 3, tf_ebp = 1606413224, tf_isp = -1672905372,
tf_ebx = 0, tf_edx =
Re: ipfirewall tricks
Unlike pf, pflog does not have a loadable module. You have to build it into the kernel. On 5/5/06, Bryan Curl [EMAIL PROTECTED] wrote: On second look PF has some definite improvements over IPFilter. My rule set file is half as long for one thing. I like the macros and tables. I'm still reading throught he documentation, but, I have not figured out why the log doesnt seem to be working yet. I have all the required entries in rc.conf. pf_enable=YES # Enable PF (load module if required) pf_rules=/etc/pf.conf # rules definition file for pf pf_flags= # additional flags for pfctl startup pflog_enable=YES # start pflogd(8) pflog_logfile=/var/log/pflog # where pflogd should store the logfile pflog_flags= # additional flags for pflogd startup Handbook at http://www.openbsd.org/faq/pf/. seems to indicate I need a device named pflog0 which I do not have. Also pflogd does not start on boot even tough it is listed in rc.conf. Perhaps the start up script did not get installed into the correct location. My installatin was from the 6.0 release ISO. so I would naturally assume it is correct. Thanks for the reminder of this program. I think I will like it better than the others for my purposes and administrative skill level. On 5/2/06, Atom Powers [EMAIL PROTECTED] wrote: On 5/2/06, Bryan Curl [EMAIL PROTECTED] wrote: I want to limit time my kids spend on the internet. The way I am doing it is to make varying, seperate ipf.rules files and install them from cron at the appropriate time. Problem is, if I make a change to one file, I generally have to update all the others accordingly. Is there a better way? I have read man ipf but didnt come out with any ideas. I would use pf and have something like this: pf.conf block out all from kids to any crontab pfctl -t kids -T add kids.ip.to.block pfctl -t kids -T del kids.ip.to.allow You can also keep the IPs in a flat file and just tell pf to re-read the file (or read a different file) to update the table. I love pf. -- -- Perfection is just a word I use occasionally with mustard. --Atom Powers-- -- -- Bryan bc3910 'at' gmail 'dot' com -- -- Perfection is just a word I use occasionally with mustard. --Atom Powers-- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Flash 7 and Firefox 1.5.0.2
On Mon, 1 May 2006 10:44:42 -0400, John Nielsen wrote: 1) I apply the rtld_dlsym_hack.diff patch after every time I update my sources and before I build / install world. Will this still be necessary in 6.1? Or has the patch already been included? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: interrupt storm
Mark Busby wrote: Checking /var/log/messages after loading snd_emu10k1, I see the following. muz kernel: pcm1: Creative EMU10K1 port 0xd800-0xd81f irq 4 at device 9.0 on pci0 muz kernel: Interrupt storm detected on irq4: atapci0; throttling interrupt source muz kernel: pcm1: SigmaTel STAC9708/11 AC97 Codec muz kernel: emujoy0: detached Upon. muz# vmstat -i interrupt total rate irq0: clk 933473998 irq4: pcm0 atapci0 1213 1 irq7: ppc0 1 0 irq8: rtc 119494127 irq11: dc0 1001 1 irq13: npx01 0 irq14: ata0 46 0 Total1055229 1128 [...] I have added to /boot/device.hints the following lines to try to force pcm to another IRQ but no joy hint.pcm.0.at=isa hint.pcm.0.irq=5 hint.pcm.0.drq=1 hint.pcm.0.flags=0x0 Is there a way to move the sound to another irq? or the atapci? and HOW? Try to place the soundcard on another PCI-Slot. This will help you most probably. HTH, Frank ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Substitute command on vi
On Fri, 2006-05-05 at 10:12 -0300, Aguiar Magalhaes wrote: Hi list, I need to substitute a lot of characters ^M (ctrl+M) at the end of each line in my file. The command :%s/^M//g insn't have success. How can i do it ? Thanks, Aguiar ___ Abra sua conta no Yahoo! Mail: 1GB de espaço, alertas de e-mail no celular e anti-spam realmente eficaz. http://br.info.mail.yahoo.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] I also has it problem. I'm in Midnight Commander copy symbol '^M' and paste to my script instead ???(see below) :-/ script: sed -e 's/$/???/g' filename filename.copy It work. :) -- Kalashnikov Ilya [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: help me
astalus razvan wrote: hy everyone.I am an FreeBSD user ,i use it every day ,but a few days ago a problem came up.I have tryed to install Firewalk 5.0.2 ,but told me that I must install libnet 1.1.2.1,1.OK i have installed libnet 1.1.2.1,1 ,but Firewalk stiil tolds that I do not have installed libnet.What should I do? P.S. for the installation of libnet i used ./configure make make install Why don't you use the ports-system? Just cd /usr/ports/security/firewalk make install clean and Firewalk with all depencies will be fetched, compiled and installed automatically. For more infos about ports stick with man ports and of course the FreeBSD Handbook. Frank ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Flash 7 and Firefox 1.5.0.2
On Friday 05 May 2006 11:59, Scott I. Remick wrote: On Mon, 1 May 2006 10:44:42 -0400, John Nielsen wrote: 1) I apply the rtld_dlsym_hack.diff patch after every time I update my sources and before I build / install world. Will this still be necessary in 6.1? Or has the patch already been included? The patch still applies cleanly to my RELENG_6 sources, so I assume it's still necessary. JN ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
subversion commit fails
On one of my machines, a subversion repository exists on its own slice, mounted at /repo The purpose (in case it matters), is to track changes to any portion of the OS install, thus most of the OS is placed into the repository. The problem comes when I try to commit the /rescue directory. Subversion fails with the following error message: Transmitting file data ... /: write failed, filesystem is full svn: Commit failed (details follow): svn: Can't copy '/rescue/chio' to '/rescue/.svn/tmp/text-base/chio.svn- base.tmp': No space left on device The installed version of subversion comes from the ports tree. The df utility reports ample space on all slices. I can create new files and directories in /rescue. I'm not certain whether this is a problem with FreeBSD, Subversion, or the hardware. I rebooted the machine at tried commiting /rescue, it still fails. System details: uname -a: FreeBSD miracle6.cpanel.net 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 df -h: Filesystem SizeUsed Avail Capacity Mounted on /dev/ad4s1a496M115M341M25%/ devfs 1.0K1.0K 0B 100%/dev /dev/ad4s1g 98G603M 89G 1%/repo /dev/ad4s1e496M 12K456M 0%/tmp /dev/ad4s1f169G3.0G153G 2%/usr /dev/ad4s1d1.4G4.5M1.3G 0%/var Dmesg output: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: ASUS A7V600-X Timecounter i8254 frequency 1193182 Hz quality 0 CPU: AMD Athlon(TM) XP 2700+ (2166.43-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x681 Stepping = 1 Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE AMD Features=0xc0400800SYSCALL,MMX+,3DNow+,3DNow real memory = 536850432 (511 MB) avail memory = 515997696 (492 MB) ioapic0: Changing APIC ID to 2 ioapic0 Version 0.3 irqs 0-23 on motherboard npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: ASUS A7V600-X on motherboard acpi0: Power Button (fixed) pci_link0: ACPI PCI Link LNKA irq 0 on acpi0 pci_link1: ACPI PCI Link LNKB irq 0 on acpi0 pci_link2: ACPI PCI Link LNKC irq 11 on acpi0 pci_link3: ACPI PCI Link LNKD irq 10 on acpi0 pci_link4: ACPI PCI Link LNKE irq 12 on acpi0 pci_link5: ACPI PCI Link LNKF irq 3 on acpi0 pci_link6: ACPI PCI Link LNKG irq 5 on acpi0 pci_link7: ACPI PCI Link LNKH irq 15 on acpi0 Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 32-bit timer at 3.579545MHz port 0xe408-0xe40b on acpi0 cpu0: ACPI CPU on acpi0 acpi_button0: Power Button on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 agp0: VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge mem 0xf800-0xfbff at device 0.0 on pci0 pcib1: ACPI PCI-PCI bridge at device 1.0 on pci0 pci1: ACPI PCI bus on pcib1 pci0: display, VGA at device 12.0 (no driver attached) atapci0: VIA 6420 SATA150 controller port 0xd800-0xd807,0xd400-0xd403,0xd000-0xd007,0xb800-0xb803,0xb400-0xb40f,0xb000-0xb0ff at device 15.0 on pci0 ata2: ATA channel 0 on atapci0 ata3: ATA channel 1 on atapci0 atapci1: VIA 8237 UDMA133 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa800-0xa80f at device 15.1 on pci0 ata0: ATA channel 0 on atapci1 ata1: ATA channel 1 on atapci1 uhci0: VIA 83C572 USB controller port 0xa400-0xa41f at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: VIA 83C572 USB controller on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: VIA 83C572 USB controller port 0xa000-0xa01f at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: VIA 83C572 USB controller on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: VIA 83C572 USB controller port 0x9800-0x981f at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: VIA 83C572 USB controller on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: VIA 83C572 USB controller port 0x9400-0x941f at device 16.3 on pci0 uhci3: [GIANT-LOCKED] usb3: VIA 83C572 USB controller on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: VIA VT6202 USB 2.0 controller mem 0xf580-0xf58000ff at device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: VIA
kile crashes after port upgrade
Same problem here under freebsd stable (6.1-PRERELEASE) on Intel box. Perhaps the problem is related to switching from lua50 to lua 51??? Thanks in advance, Javier Alexander Konovalenko [EMAIL PROTECTED] wrote: Hello, recently I have upgraded some ports on my FreeBSD 5.4 amd64 box. kile does not work anymore, it crashes when it tries to load tex file (either manually via File-Open or automatically loading file which was edited from previuos session). Reinstallation of kile did not help. I noticed that at least two dependencies were upgraded: lua-5.0.2.1 and fontconfig-2.3.2_3,1 to lua-5.1 and fontconfig-2.3.2_4 respectively. I don't know if it is a problem. The output from kile something.tex follows: ... kile: ViewHTML is using group: Tool/ViewHTML/Embedded Viewer kile: adding ViewHTML View #3 kile: ViewPDF is using group: Tool/ViewPDF/Embedded Viewer kile: adding ViewPDF View #4 kile: ViewPS is using group: Tool/ViewPS/Embedded Viewer kile: adding ViewPS View #5 kile: ==Kile::activePartGUI()= kile: current state Editor kile: want state Editor kile: starting the LyX server... kile: Opened /home/je/.lyxpipe.in kile: Opened /home/je/.lyx/lyxpipe.in kile: Opened /home/je/.lyxpipe.out kile: Opened /home/je/.lyx/lyxpipe.out kile: Created notifier for /home/je/.lyxpipe.in kile: Created notifier for /home/je/.lyx/lyxpipe.in kile: No notifier created fro /home/je/.lyxpipe.out kile: No notifier created fro /home/je/.lyx/lyxpipe.out kile: === CodeCompletion::readConfig === kile:set regexp for references... kile:read wordlists... kile: new quotes: true left=`` right='' kile: ==Kile::updateModeStatus()== kile: ==Kile::updateKileMenu() kile: projectopen=false fileopen=false kile: ==completePath(glex.tex)=== kile: /home/datos/JaviZ/UNS/papers/China2006/glex.tex kile: ==Kile::openDocument(/home/datos/JaviZ/UNS/papers/China2006/glex.tex)== kile: ==Kile::fileOpen== kile: file:///home/datos/JaviZ/UNS/papers/China2006/glex.tex kile: ==bool KileInfo::isOpen(const KURL url)= kile: ==load(file:///home/datos/JaviZ/UNS/papers/China2006/glex.tex)= kile: ==bool KileInfo::isOpen(const KURL url)= kile:nothing found kile: CREATING TeXInfo for file:///home/datos/JaviZ/UNS/papers/China2006/glex.tex kile: DOCINFO: returning 0x879ec00 glex.tex kile: ==Kate::Document* Manager::createDocument()=== kile: appending document 0x0 KCrash: Application 'kile' crashing... [1]42531 killed kile glex.tex ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: BSD equiv of /proc?
On Fri, May 05, 2006 at 10:07:03AM -0400, Jim Stapleton wrote: I have a proc filesystem on my computer, but it's empty. I'm used to linux, where you can do stuff like 'cat /proc/cpuinfo' to get information about the system. What is the BSD equivalent of this, or is it /proc, and I'm just missing something? As others have said, FreeBSD's /proc doesn't give you cpuinfo or the other metadata that Linux provides, but it shouldn't be completely empty. A line like this in /etc/fstab should be enough to get it working: proc/proc procfs rw 0 0 You should get a directory under /proc for every process on the system, with a bunch of files under each one. Try man procfs for the details. Cheers, Scott -- === Scott Mitchell | PGP Key ID | Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines scott at fishballoon.org | 0xAA775B8B | -- Anon ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
How to get best results from FreeBSD-questions
How to get the best results from FreeBSD questions. === Last update $Date: 2005/08/10 02:21:44 $ This is a regular posting to the FreeBSD questions mailing list. If you got it in answer to a message you sent, it means that the sender thinks that at least one of the following things was wrong with your message: - You left out a subject line, or the subject line was not appropriate. - You formatted it in such a way that it was difficult to read. - You asked more than one unrelated question in one message. - You sent out a message with an incorrect date, time or time zone. - You sent out the same message more than once. - You sent an 'unsubscribe' message to FreeBSD-questions. If you have done any of these things, there is a good chance that you will get more than one copy of this message from different people. Read on, and your next message will be more successful. This document is also available on the web at http://www.lemis.com/questions.html. = Contents: I:Introduction II: How to unsubscribe from FreeBSD-questions III: Should I ask -questions or -hackers? IV: How to submit a question to FreeBSD-questions V:How to answer a question to FreeBSD-questions I: Introduction === This is a regular posting aimed to help both those seeking advice from FreeBSD-questions (the newcomers), and also those who answer the questions (the hackers). Note that the term hacker has nothing to do with breaking into other people's computers. The correct term for the latter activity is cracker, but the popular press hasn't found out yet. The FreeBSD hackers disapprove strongly of cracking security, and have nothing to do with it. In the past, there has been some friction which stems from the different viewpoints of the two groups. The newcomers accused the hackers of being arrogant, stuck-up, and unhelpful, while the hackers accused the newcomers of being stupid, unable to read plain English, and expecting everything to be handed to them on a silver platter. Of course, there's an element of truth in both these claims, but for the most part these viewpoints come from a sense of frustration. In this document, I'd like to do something to relieve this frustration and help everybody get better results from FreeBSD-questions. In the following section, I recommend how to submit a question; after that, we'll look at how to answer one. II: How to unsubscribe from FreeBSD-questions == When you subscribed to FreeBSD-questions, you got a welcome message from [EMAIL PROTECTED] In this message, amongst other things, it told you how to unsubscribe. Here's a typical message: Welcome to the freebsd-questions@freebsd.org mailing list! If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at: http://lists.freebsd.org/mailman/options/freebsd-questions/[EMAIL PROTECTED] (obviously, substitute your mail address for [EMAIL PROTECTED]). You can also make such adjustments via email by sending a message to: [EMAIL PROTECTED] with the word 'help' in the subject or body (don't include the quotes), and you will get back a message with instructions. You must know your password to change your options (including changing the password, itself) or to unsubscribe. Normally, Mailman will remind you of your freebsd.org mailing list passwords once every month, although you can disable this if you prefer. This reminder will also include instructions on how to unsubscribe or change your account options. There is also a button on your options page that will email your current password to you. Here's the general information for the list you've subscribed to, in case you don't already have it: FREEBSD-QUESTIONS User questions This is the mailing list for questions about FreeBSD. You should not send how to questions to the technical lists unless you consider the question to be pretty technical. Normally, unsubscribing is even simpler than the message suggests: you don't need to specify your mail ID unless it is different from the one which you specified when you subscribed. If Majordomo replies and tells you (incorrectly) that you're not on the list, this may mean one of two things: 1. You have changed your mail ID since you subscribed. That's where keeping the original message from majordomo comes in handy. For example, the sample message above shows my mail ID as [EMAIL PROTECTED] Since then, I have changed it to [EMAIL PROTECTED] If I were to try to remove [EMAIL PROTECTED] from the list, it would fail: I would have to specify the name with which I joined. 2. You're subscribed to a mailing list which is subscribed to
The Complete FreeBSD: errata and addenda
The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, The Complete FreeBSD, published by O'Reilly, is no exception. Inevitably, a number of bugs and changes have surfaced. The Complete FreeBSD has been through a total of five editions, including its predecessor Installing and Running FreeBSD. Two of these have been reprinted with corrections. I maintain a series of errata pages. Start at http://www.lemis.com/errata-4.html to find out how to get the errata information. Note also that the book has now been released for free download in PDF form. Instead of downloading the changed pages, you may prefer to download the entire book. See http://www.lemis.com/grog/Documentation/CFBSD/ for more information. Have you found a problem with the book, or maybe something confusing? Please let me know: I'm no longer constantly updating it, but I may be able to help Greg ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: pkg_add gnuplot
On Fri, May 05, 2006 at 05:00:46AM +, Jonathan Herriott wrote: Hey, I'm trying to add the package gnuplot, and when I do, it goes and tries to add another necessary package pdflib. The issue is that it cannot find pdflib. I get the following: pkg_add -r gnuplot Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6.0-release/Latest/gnuplot.tbz... Done. Error: FTP Unable to get ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6.0-release/All/pdflib-6.0.1_2.tbz: File unavailable (e.g., file not found, no access) pkg_add: can't open dependency file '/var/db/pkg/pdflib-6.0.1_2/+REQUIRED_BY '! dependency registration is incomplete For some reason the file does not exist on the server. Is there another method that I can get pdflib that pkg_add will recognize for when I pkg_add -r gnuplot again? pdflib packages may not be distributed according the license on the software. Sorry, you need to compile it yourself from the port. Kris pgpQd0m8wdRWI.pgp Description: PGP signature
Re: panic: page fault - 6.0-RELEASE-p7
On Fri, May 05, 2006 at 09:14:04AM -0600, Nick Wood wrote: Hello, We have a group of web and mail servers that run under a moderate load. We recently upgraded them from 4/5.x to 6.0. While we thought we had done enough testing, apparently we hadn't and are now experiencing panic's on a number of the servers. Some of our more heavily loaded servers have been fine for days, while others will crash every 6 to 36 hours. Below are some pieces of information that may be helpful. Try 6.1 first in case the bug is already fixed. Kris pgpPzXZAJeLJa.pgp Description: PGP signature
removing geom config left over from previous install
Trying to mirror the system using geom on a box with 2 pairs of identical SCSI drives (2 IBM 9GB drives and 2 Seagate 35GB drives). The Seagate drives were mirrored with geom under a previous install and I was trying to mirror the system, when all was not working and I decided to start all over again. I have tried a few times now with a fresh install of FreeBSD 6.0 and on the last round, removed and wrote changes to the disk in the splice setup for all four disks and then restarted the machine and installation to make sure I had all disks with one slice of unused space to start. I did, so I proceeded to create all my partitions on the one IBM da0 drive to mirrored with da1 after install. The issue is that after loading the mirror, I get what seems to be my previous devices, how can I get a fresh start? Because this eventually leads to 'bsdlabel: Geom not found'...right after first boot, I am following the doc at http://people.freebsd.org/~rse/mirror/ files# dd if=/dev/zero of=/dev/da1 bs=512 count=79 79+0 records in 79+0 records out 40448 bytes transferred in 0.015124 secs (2674452 bytes/sec) files# fdisk -v -B -I /dev/da1 *** Working on device /dev/da1 *** fdisk: invalid fdisk partition table found parameters extracted from in-core disklabel are: cylinders=1115 heads=255 sectors/track=63 (16065 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=1115 heads=255 sectors/track=63 (16065 blks/cyl) Information from DOS bootblock is: 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 17912412 (8746 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 90/ head 254/ sector 63 2: UNUSED 3: UNUSED 4: UNUSED fdisk: Geom not found files# gmirror label -v -n -b round-robin gm0s1 /dev/da1s1 Metadata value stored on /dev/da1s1. Done. files# ls /dev/mirror ls: /dev/mirror: No such file or directory files# gmirror load files# ls /dev/mirror datadatas1c gm0 gm0s1 datas1 datas1ccgm0s1 files# ls -la /dev/mirror total 1 dr-xr-xr-x 2 root wheel 512 May 5 13:15 . dr-xr-xr-x 5 root wheel 512 Dec 31 1969 .. crw-r- 1 root operator0, 114 May 5 13:07 data crw-r- 1 root operator0, 124 May 5 13:07 datas1 crw-r- 1 root operator0, 126 May 5 13:07 datas1c crw-r- 1 root operator0, 128 May 5 13:07 datas1cc crw-r- 1 root operator0, 123 May 5 13:07 gm0 crw-r- 1 root operator0, 125 May 5 13:07 gm0s1 crw-r- 1 root operator0, 125 May 5 13:07 gm0s1 files# bsdlabel -w -B /dev/mirror/gm0s1 bsdlabel: Geom not found -- Robert ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
re: Substitute command on vi
Try #dos2unix file_name Hi list, I need to substitute a lot of characters ^M (ctrl+M) at the end of each line in my file. The command :%s/^M//g insn't have success. How can i do it ? Thanks, Aguiar ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
cvs
I have been building a cvs structure for a bunch of code and have a couple questions I have not been able to find answers to in the archives/documentation. When you run ident on many FreeBSD modules you see the identifier FreeBSD used frequently. It appears that cvs is properly updating the information in those entries, but I don't see how cvs is configured to make that happen. FreeBSD is not one of the cvs recognized keywords. I would like to use a unique keyword for my stuff. ident finds it fine in the files, but cvs does not update the version information. I suspect that somehow I need to tell cvs about the keyword. Also, in the process of going through all the source to put into cvs I found a number of modules that are no longer in use. cvs remove deletes them from the cvs archive. However, occasionally I need something that is no longer in use and would like to be able to save deleted modules somwhere in cvs. I don't want them to be returned in a normal checkout but would like them to be available somehow. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: i/o error OOo-2.0.2 NFS
On Fri, 5 May 2006 12:51:47 +0200 Fabian Keil [EMAIL PROTECTED] wrote: dick hoogendijk [EMAIL PROTECTED] wrote: Yesterday I installed OpenOffice-2.0.2 from (the most recent) ports. It runs very well, but I have an error that I don't understand. Opening a file on my local machine is OK, but when I try to open one on a NFS mounted directory I get an I/O general error and the file is not opened. I run OOo-1.1.5 on the same machine without any problems. Any ideas where (what) to look (for)? man rpc.lockd (Just a guess, I don't use OpenOffice). I don't think so. OOo-1.1.5 opens the (NFS served) file OK. The same file gets denied by OOo-2.0.2. The only $var is another OOo version ;-) -- dick -- http://nagual.st/ -- PGP/GnuPG key: F86289CE ++ Running FreeBSD 6.1 ++ The Power to Serve ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cvs
On 2006-05-05 10:45, Doug Hardie [EMAIL PROTECTED] wrote: I have been building a cvs structure for a bunch of code and have a couple questions I have not been able to find answers to in the archives/documentation. When you run ident on many FreeBSD modules you see the identifier FreeBSD used frequently. It appears that cvs is properly updating the information in those entries, but I don't see how cvs is configured to make that happen. FreeBSD is not one of the cvs recognized keywords. I would like to use a unique keyword for my stuff. ident finds it fine in the files, but cvs does not update the version information. I suspect that somehow I need to tell cvs about the keyword. See this article for details of the FreeBSD CVS setup: http://www.freebsd.org/doc/en_US.ISO8859-1/articles/cvs-freebsd/ Part of this explains how our `cfg_local.pm' works and you can use a similar trick for any custom $FreeBSD$-like keyword you want. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: removing geom config left over from previous install
[mailto:[EMAIL PROTECTED] On Behalf Of Robert Fitzpatrick Sent: Friday, May 05, 2006 10:35 AM To: FreeBSD Subject: removing geom config left over from previous install Trying to mirror the system using geom on a box with 2 pairs of identical SCSI drives (2 IBM 9GB drives and 2 Seagate 35GB drives). The Seagate drives were mirrored with geom under a previous install and I was trying to mirror the system, when all was not working and I decided to start all over again. I have tried a few times now with a fresh install of FreeBSD 6.0 and on the last round, removed and wrote changes to the disk in the splice setup for all four disks and then restarted the machine and installation to make sure I had all disks with one slice of unused space to start. I did, so I proceeded to create all my partitions on the one IBM da0 drive to mirrored with da1 after install. The issue is that after loading the mirror, I get what seems to be my previous devices, how can I get a fresh start? Because this eventually leads to 'bsdlabel: Geom not found'...right after first boot, I am following the doc at http://people.freebsd.org/~rse/mirror/ files# dd if=/dev/zero of=/dev/da1 bs=512 count=79 79+0 records in 79+0 records out 40448 bytes transferred in 0.015124 secs (2674452 bytes/sec) files# fdisk -v -B -I /dev/da1 *** Working on device /dev/da1 *** fdisk: invalid fdisk partition table found parameters extracted from in-core disklabel are: cylinders=1115 heads=255 sectors/track=63 (16065 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=1115 heads=255 sectors/track=63 (16065 blks/cyl) Information from DOS bootblock is: 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 17912412 (8746 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 90/ head 254/ sector 63 2: UNUSED 3: UNUSED 4: UNUSED fdisk: Geom not found files# gmirror label -v -n -b round-robin gm0s1 /dev/da1s1 Metadata value stored on /dev/da1s1. The geom metadata is stored in the last block of the slice. Zero it as well and you can have a clean start. -gayn Bristol Systems Inc. 714/532-6776 www.bristolsystems.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: i/o error OOo-2.0.2 NFS
dick hoogendijk [EMAIL PROTECTED] wrote: On Fri, 5 May 2006 12:51:47 +0200 Fabian Keil [EMAIL PROTECTED] wrote: dick hoogendijk [EMAIL PROTECTED] wrote: Yesterday I installed OpenOffice-2.0.2 from (the most recent) ports. It runs very well, but I have an error that I don't understand. Opening a file on my local machine is OK, but when I try to open one on a NFS mounted directory I get an I/O general error and the file is not opened. I run OOo-1.1.5 on the same machine without any problems. Any ideas where (what) to look (for)? man rpc.lockd (Just a guess, I don't use OpenOffice). I don't think so. OOo-1.1.5 opens the (NFS served) file OK. The same file gets denied by OOo-2.0.2. The only $var is another OOo version ;-) Think so. This is the exact same problem I had when I upgrade from OOo1 to OOo2. Search the archives and you'll see that Fabian is correct and that it solved the problem for me. Apparently, OOo2 is more careful about locking semantics. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: BSD equiv of /proc?
On 5/5/06 15:44, Jeff Rollin [EMAIL PROTECTED] wrote: Jeff. On 05/05/06, Bill Moran [EMAIL PROTECTED] wrote: On Fri, 5 May 2006 10:07:03 -0400 Jim Stapleton [EMAIL PROTECTED] wrote: I have a proc filesystem on my computer, but it's empty. I'm used to linux, where you can do stuff like 'cat /proc/cpuinfo' to get information about the system. What is the BSD equivalent of this, or is it /proc, and I'm just missing something? If you absolutely can't live without /proc, install the linuxulator and mount linproc. It will give you a linux compatible /proc. Will that only work for Linux programs? It is available to them all (if they know to look in /compat/linux/proc, which is the canonical place for the linprocfs mount - Linux programs get redirected there automagically). I don't know if stuff would break if you mounted a linprocfs at /proc. Ceri -- That must be wonderful! I don't understand it at all. -- Moliere ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: DCSSI Authorisation for Free BSD Software
ExportControls [EMAIL PROTECTED] wrote: Hi Bill, Thank you for your prompt reply. Our client Reuters Ltd. operates a system whereby they collate a number of products, approved for use by certain Reuters offices, onto a disk (FreeBSD is part of these programmes). The assembly of the disk is done in the UK, and upon completion the disk is sent to the US where it is loaded onto a central server which the approved Reuters offices can access and download the programme(s). Consequently, this means that Reuters purchase the product in the UK, export it to the US, and potentially import it again to France if a French office is approved to install the product. Additionally, because FreeBSD contains what is considered strong cryptography, French authorities (the DCSSI) requires that an authorisation is obtained for the item if it is to be imported to, supplied in, used in, or exported from France. It is Reuters policy to be complaint with all relevant regulations in the countries they operate, and as Reuters will potentially be doing all of the activities mentioned above it is essential that they obtain the relevant authorisation from the DCSSI prior to importing to, supplying in, using in, or exporting FreeBSD from France. Consequently, Reuters cannot export FreeBSD from its server in the US to its French offices until said authorisation has been obtained. Therefore, we would appreciate if you could investigate whether such an authorisation has been obtained for FreeBSD v4.1, alternatively refer us to a legal contact that may be able to answer our query. Hopefully this motivates our query, but please do not hesitate to contact me if you require additional information. I look forward to your reply, in the meantime, thank you very much for your assistance. First off, please don't top-post. Secondly, you initially contacted the mailing list [EMAIL PROTECTED], which consists of volunteers who assist people with the use of FreeBSD in their spare time. It's poor form to contact a volunteer outside of the list unless the volunteer has requested it. I've returned this discussion to the list to remedy that. Thirdly, it sounds as if you want some sort of legal certification. You're not liable to find anyone who's willing to volunteer that sort of information. I suggest you contact the FreeBSD Foundation (http://www.freebsdfoundation.org/) which has some formal presence, and may be able to help. Otherwise, you may want to look here http://www.freebsd.org/commercial/ for a vendor who is willing to provide consulting services. Bethan Phillips [EMAIL PROTECTED] wrote: Good Afternoon, We are working with our client Reuters to help them comply with EU and US export control regulation. In this regard, Reuters have some Free BSD v4.1 software, which they are sending to France. A declaration or authorisation may be needed for this software for import into, use in, supply in, or export from France. Can you please advice us if FreeBSD have obtained a French encryption authorisation for the above mentioned software from the DCSSI? If this is the case we would be grateful if you could provide us with a copy of this authorisation, as Reuters will need this to export this product to/from France, and the DCSSI does not supply this information to third parties. I am not a lawyer. This is not legal advise. However: http://www.fr.freebsd.org/ The site is actually _hosted_in_ France. Thus you are wasting your time. There is no need to export the software at all, it's already in France. -- Bill Moran Potential Technologies http://www.potentialtech.com This e-mail and any attachment are confidential and contain proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient, please notify the author immediately by telephone or by replying to this e-mail, and then delete all copies of the e-mail on your system. If you are not the intended recipient, you must not use, disclose, distribute, copy, print or rely on this e-mail. Whilst we have taken reasonable precautions to ensure that this e-mail and any attachment has been checked for viruses, we cannot guarantee that they are virus free and we cannot accept liability for any damage sustained as a result of software viruses. We would advise that you carry out your own virus checks, especially before opening an attachment. The UK firm Ernst Young LLP is a limited liability partnership registered in England and Wales with registered number OC31 and is a member practice of Ernst Young Global. A list of members' names is available for inspection at 1 More London Place, London, SE1 2AF, the firm's principal place of business and its registered office. -- Bill Moran
HTTP
Hi, I need some basic helps! :) our sytem run at FreeBSD 5.3, and my team leader let me change logo in a PHP file because our company will change name. I do but not really finished. I changed the index.php file, so every time if I entered http://.../index.php the logo has changed, but if I only input http://... the logo no change at all. so I found the both is different. where should I go? which file in the 2nd case run? Pls help me.Thx in advanced! Jason - Share your photos with the people who matter at Yahoo! Canada Photos ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: HTTP
On 5/5/06, jason zeng [EMAIL PROTECTED] wrote: our sytem run at FreeBSD 5.3, and my team leader let me change logo in a PHP file because our company will change name. I do but not really finished. I changed the index.php file, so every time if I entered http://.../index.php the logo has changed, but if I only input http://... the logo no change at all. so I found the both is different. where should I go? which file in the 2nd case run? Depends on your web server config. Apache, for instance, usually defaults to index.html if you don't specify which file you want. -- -- Perfection is just a word I use occasionally with mustard. --Atom Powers-- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: HTTP
On Fri, 5 May 2006, jason zeng wrote: Hi, I need some basic helps! :) our sytem run at FreeBSD 5.3, and my team leader let me change logo in a PHP file because our company will change name. I do but not really finished. I changed the index.php file, so every time if I entered http://.../index.php the logo has changed, but if I only input http://... the logo no change at all. so I found the both is different. where should I go? which file in the 2nd case run? Hi Jason, Have you tried refreshing your browser cache? Some browsers need a special key combination to force a refresh of everything. HTH, -Andy. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: HTTP
Check the order in your apache httpd.conf for default document types. With no page name given the pages are served in the order listed in the configuration. -Derek At 03:32 PM 5/5/2006, jason zeng wrote: Hi, I need some basic helps! :) our sytem run at FreeBSD 5.3, and my team leader let me change logo in a PHP file because our company will change name. I do but not really finished. I changed the index.php file, so every time if I entered http://.../index.php the logo has changed, but if I only input http://... the logo no change at all. so I found the both is different. where should I go? which file in the 2nd case run? Pls help me.Thx in advanced! Jason - Share your photos with the people who matter at Yahoo! Canada Photos ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Problem with cordless mouse/Keyboard combo set
Stephanie Bridges [EMAIL PROTECTED] wrote: I had the same problem with the mouse (would occasionally move the cursor, never any clicks) until I accidentally got the receiver closer to the mouse. I now have the receiver about three inches away from the mouse. Works wonderfully well now. Thanks Stephanie, but unfortunately that didn't help here. I have moved my receiver so close to the mouse that its hard to not bump them, but the mouse still doesn't work. What I have noticed since I sent my original message, is that /dev/sysmouse exists even when only the non-working mouse is connected nto the system. Does this mean that FreeBSD /is/ detecting the mouse (and hence that I should be looking somewhere else than this list for the problem), or does that file simply always exist? -- Lennon Victor Cook He who receives an idea from me receives without lessening, as he who lights his candle at mine receives light without darkening - Thomas Jefferson ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: portmanager install from packages (please)
Joel Hatton wrote: Hi, I've lately been using portmanager on my build host, instead of portupgrade, to rebuild ports and produce packages and I'm impressed. But now I want more... It seems to me that one of the greatest benefits of portmanager is that it is a compiled executable, and thus doesn't rely on Ruby. In our environment, where ports are built on one machine and then installed from packages on others, it would make a lot of sense if I didn't have to install Ruby just so that I can run portupgrade. All I really want to do is put the new packages on the machine and upgrade from those, using a single binary that doesn't require extra support. But, brilliant though it is, I can't do this with portmanager. Now, it occurs to me that I could just do something as simple as run pkg_delete/pkg_add against the most recently available packages, but I'm sure I'd risk breaking something on a critical host. Extending portmanager to perform this function seems logical. cheers, -- Joel Hatton -- Infrastructure Manager | Hotline: +61 7 3365 4417 AusCERT - Australia's national CERT | Fax: +61 7 3365 7031 The University of Queensland| WWW: www.auscert.org.au Qld 4072 Australia | Email: [EMAIL PROTECTED] Have you tried contacting Michael C. Shultz [EMAIL PROTECTED] in regards to this matter? -- Gerard Seibert [EMAIL PROTECTED] Never put off till tomorrow what you can avoid altogether. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: R 2.3.0 fails to compile: undefined reference to `R_running_as_main_program'
Christopher Illies wrote: On Tue, May 02, 2006 at 09:24:13AM +0100, Vittorio wrote: Last night , after portsnap(-ping) and trying to recompile the statistical software R from 2.2.1 to 2.3.0 I get the following: [...] cc -export-dynamic -L/usr/local/lib -o R.bin Rmain.o -L../.. /lib -lR Rmain.o(.text+0x14): In function `main': : undefined reference to `R_running_as_main_program' *** Error code 1 No solution here, instead I am having the same problem, running 6.1-RC. If you found a solution, could you please post it here? You can work around this problem by removing R 2.2.1 before building R 2.3.0. I'll fix the port as soon as I have time. Eric -- the math/R maintainer ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cvs
On May 5, 2006, at 11:04, Giorgos Keramidas wrote: On 2006-05-05 10:45, Doug Hardie [EMAIL PROTECTED] wrote: I have been building a cvs structure for a bunch of code and have a couple questions I have not been able to find answers to in the archives/documentation. When you run ident on many FreeBSD modules you see the identifier FreeBSD used frequently. It appears that cvs is properly updating the information in those entries, but I don't see how cvs is configured to make that happen. FreeBSD is not one of the cvs recognized keywords. I would like to use a unique keyword for my stuff. ident finds it fine in the files, but cvs does not update the version information. I suspect that somehow I need to tell cvs about the keyword. See this article for details of the FreeBSD CVS setup: http://www.freebsd.org/doc/en_US.ISO8859-1/articles/cvs-freebsd/ Part of this explains how our `cfg_local.pm' works and you can use a similar trick for any custom $FreeBSD$-like keyword you want. Thanks. I did figure it out. For anyone else who wants the simple way: To have XXX and Id work as a keywords edit the config file in CVSROOT in the repository. Add the following two lines: tag=XXX=CVSHeader tagexpand=iXXX,Id Only the XXX and Id keywords will then expand. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Enquiry the FreeBSD scourse
Dear Sir, I haven't any experience on FreeBSD. Could you please kindly advice any refer book to me? which will help me easily to handle the command and control. thanks a lot. Best regards Daniel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
rm: Operation not permitted
I'm having trouble erasing some files - this on a 6.1RC system (built from -STABLE) - I created a system image using his script: #!/bin/sh make buildworld KERNCONF=CLOCK make buildkernel KERNCONF=CLOCK mkdir -p /raid/diskless/clock make installworld DESTDIR=/raid/diskless/clock cd /usr/src/etc; make distribution DESTDIR=/raid/diskless/clock cd /usr/src make installkernel KERNCONF=CLOCK DESTDIR=/raid/diskless/clock and now when I try to delete it this happens ... # rm -rf clock rm: clock/bin/rcp: Operation not permitted rm: clock/bin: Directory not empty rm: clock/lib/libcrypt.so.3: Operation not permitted rm: clock/lib/libc.so.6: Operation not permitted rm: clock/lib: Directory not empty rm: clock/libexec/ld-elf.so.1: Operation not permitted rm: clock/libexec: Directory not empty rm: clock/sbin/init: Operation not permitted rm: clock/sbin: Directory not empty and so on. The system is running at securelevel -1 and the rm fails even in single user mode - what am I missing? John ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: rm: Operation not permitted
On Fri, May 05, 2006 at 07:54:07PM -0700, John Pettitt wrote: I'm having trouble erasing some files - this on a 6.1RC system (built from -STABLE) - I created a system image using his script: #!/bin/sh make buildworld KERNCONF=CLOCK make buildkernel KERNCONF=CLOCK mkdir -p /raid/diskless/clock make installworld DESTDIR=/raid/diskless/clock cd /usr/src/etc; make distribution DESTDIR=/raid/diskless/clock cd /usr/src make installkernel KERNCONF=CLOCK DESTDIR=/raid/diskless/clock and now when I try to delete it this happens ... # rm -rf clock rm: clock/bin/rcp: Operation not permitted rm: clock/bin: Directory not empty rm: clock/lib/libcrypt.so.3: Operation not permitted rm: clock/lib/libc.so.6: Operation not permitted rm: clock/lib: Directory not empty rm: clock/libexec/ld-elf.so.1: Operation not permitted rm: clock/libexec: Directory not empty rm: clock/sbin/init: Operation not permitted rm: clock/sbin: Directory not empty and so on. The system is running at securelevel -1 and the rm fails even in single user mode - what am I missing? chflags -R noschg Kris pgp9Nc8nd5xpU.pgp Description: PGP signature
Re: rm: Operation not permitted
Kris Kennaway wrote: On Fri, May 05, 2006 at 07:54:07PM -0700, John Pettitt wrote: I'm having trouble erasing some files - this on a 6.1RC system (built from -STABLE) - I created a system image using his script: #!/bin/sh make buildworld KERNCONF=CLOCK make buildkernel KERNCONF=CLOCK mkdir -p /raid/diskless/clock make installworld DESTDIR=/raid/diskless/clock cd /usr/src/etc; make distribution DESTDIR=/raid/diskless/clock cd /usr/src make installkernel KERNCONF=CLOCK DESTDIR=/raid/diskless/clock and now when I try to delete it this happens ... # rm -rf clock rm: clock/bin/rcp: Operation not permitted rm: clock/bin: Directory not empty rm: clock/lib/libcrypt.so.3: Operation not permitted rm: clock/lib/libc.so.6: Operation not permitted rm: clock/lib: Directory not empty rm: clock/libexec/ld-elf.so.1: Operation not permitted rm: clock/libexec: Directory not empty rm: clock/sbin/init: Operation not permitted rm: clock/sbin: Directory not empty and so on. The system is running at securelevel -1 and the rm fails even in single user mode - what am I missing? chflags -R noschg Kris Thanks that did it. Not enough caffeine today. John ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Enquiry the FreeBSD scourse
On 5/6/06, Daniel [EMAIL PROTECTED] wrote: Dear Sir, I haven't any experience on FreeBSD. Could you please kindly advice any refer book to me? which will help me easily to handle the command and control. thanks a lot. Dead-Tree form (a little dated): The Complete FreeBSD, Fourth Edition by Greg Lehey (Paperback - April 29, 2003) Current Documentation, and the authorative source: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ -- -- Perfection is just a word I use occasionally with mustard. --Atom Powers-- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problems installing/running acroread 7: libBIB.so
Hi everyone, I'm having trouble with the acroread 7 port. I seem to have installed it just fine, but it fails to run, citing the following error: /usr/X11R6/Adobe/Acrobat7.0/ENU/Reader/intellinux/bin/acroread: error while loading shared libraries: libBIB.so: cannot open shared object file: No such file or directory Now, I know that I have this library: $ locate libBIB.so /usr/X11R6/Adobe/Acrobat7.0/ENU/Reader/intellinux/lib/libBIB.so /usr/X11R6/Adobe/Acrobat7.0/ENU/Reader/intellinux/lib/libBIB.so.1.1 /usr/local/Acrobat5/Reader/intellinux/lib/libBIB.so /usr/local/Acrobat5/Reader/intellinux/lib/libBIB.so.1.1 so I'm a little confused as to what the error is telling me and what I can do to fix it. Any suggestions will be welcomed! Cheers Andrew -- Andrew Robinson Department of Mathematics and StatisticsTel: +61-3-8344-9763 University of Melbourne, VIC 3010 Australia Fax: +61-3-8344-4599 Email: [EMAIL PROTECTED] http://www.ms.unimelb.edu.au ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Problems installing/running acroread 7: libBIB.so
try to move it library to /lib 2006/5/6, Andrew Robinson [EMAIL PROTECTED]: Hi everyone, I'm having trouble with the acroread 7 port. I seem to have installed it just fine, but it fails to run, citing the following error: /usr/X11R6/Adobe/Acrobat7.0/ENU/Reader/intellinux/bin/acroread: error while loading shared libraries: libBIB.so: cannot open shared object file: No such file or directory Now, I know that I have this library: $ locate libBIB.so /usr/X11R6/Adobe/Acrobat7.0/ENU/Reader/intellinux/lib/libBIB.so /usr/X11R6/Adobe/Acrobat7.0/ENU/Reader/intellinux/lib/libBIB.so.1.1 /usr/local/Acrobat5/Reader/intellinux/lib/libBIB.so /usr/local/Acrobat5/Reader/intellinux/lib/libBIB.so.1.1 so I'm a little confused as to what the error is telling me and what I can do to fix it. Any suggestions will be welcomed! Cheers Andrew -- Andrew Robinson Department of Mathematics and StatisticsTel: +61-3-8344-9763 University of Melbourne, VIC 3010 Australia Fax: +61-3-8344-4599 Email: [EMAIL PROTECTED] http://www.ms.unimelb.edu.au ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
