Hi !!
I have mandrake 9.1 with a 2.6.6 kernel and I want to install the ipsec-tools3.2 on my
server (freebsd 5.2) but I don't understand how I can do that?
Sorry if it seems stupid but I don't find the rpm file (if it exists).
If I make a ./configure in the directory ipsec-tools3.2 I have an erro
On Monday 24 May 2004 10:53 pm, Gary Kline wrote:
> On Mon, May 24, 2004 at 10:30:09PM -0700, Kris Kennaway wrote:
> > On Mon, May 24, 2004 at 09:45:08PM -0700, Gary Kline wrote:
> > > Fellow BSD'ers,
> > >
> > > What kinds of the newer AMD processors worth with FreeBSD?
> >
> > All.
> >
> > Kr
I recieved my security run today (as usual) and an error which I have
never seen before appeared:
hitbox.monsternet.lan kernel log messages:
> tabase /etc/aliases.db: No such file or directory
A quick locate shows that there is no such command as tabase! Any ideas
what this might be?
___
Edd wrote:
I recieved my security run today (as usual) and an error which I have
never seen before appeared:
hitbox.monsternet.lan kernel log messages:
tabase /etc/aliases.db: No such file or directory
A quick locate shows that there is no such command as tabase! Any ideas
what this might be?
That
I had the same thing show up today .. and what it wound up being was postfix
>From: Uwe Doering <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: Security run question
>Date: Tue, 25 May 2004 10:35:56 +0200
>MIME-Version: 1.0
>Received: from mx2.freebsd.org ([216.136.204.119]) by mc1-f4.hotm
On Mon, May 24, 2004 at 08:48:35PM -0700, Raymond Lillard wrote:
> I just failed at an attempt to pull down the latest sources
> via anoncvs using the instructions found at the URL below.
>
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/anoncvs.html
Looks like the docs have got a li
Chris Collins wrote:
Hello All
Is there a way to list files on my system that belong to a certain user. I
have quotas enabled and cannot find out where all the space is being used.
With quotas enabled this should be easy. Use 'repquota' and sort the
list by allocated disk space:
repquota -u /
The problem is that this behaviour occurs also in a fresh installation
(4.9/8.3.6) in a different box (following the same installation checklist).
At this moment I'm considering to install and setup BIND 8.3.7 in the same
box that is running BIND 8.3.6 manually, i.e. not on boot. :-((
Thanks Matt
I`m very close to byu a AMD64 system, but I`m not quite sure how it will work on
FreeBSD.
Is there something I should be aware about? Some mainboards maybe?
And how about S-ATA on these boards?
(I will probably run 5-CURRENT)
--
Med vennlig hilsen
Christer Solskogen
Telenor Forhandlerservice
Tl
On Tue, 25 May 2004 9:56 am, Warren Block wrote:
> On Mon, 24 May 2004, Joachim Dagerot wrote:
> > The man page for dump states this:
> >
> > []
> > -B records
> > The number of kilobytes per output volume, except that if it is
> > not an integer multiple of the output block size, the command
On Monday, May 24, 2004 10:59:45 PM [EMAIL PROTECTED] wrote:
|>Date: Mon, 24 May 2004 16:16:52 -0400
|>From: Andrew Kilpatrick <[EMAIL PROTECTED]>
|>Subject: Sounds breaks up with 5.2-STABLE
|>To: [EMAIL PROTECTED]
|>Message-ID: <[EMAIL PROTECTED]>
|>Content-Type: text/plain; charset="us-ascii"
|
[EMAIL PROTECTED] wrote:
I`m very close to byu a AMD64 system, but I`m not quite sure how it will work on
FreeBSD.
Is there something I should be aware about? Some mainboards maybe?
And how about S-ATA on these boards?
(I will probably run 5-CURRENT)
--
Med vennlig hilsen
Christer Solskogen
Teleno
Hi.
Right now we have one ISP, our servers that uses IP from this ISP are
running several services (dns, www, databases, mta etc).
We want to increase stability of our network access by obtaining backup
internet connection from another ISP.
My question is:
Is there a way to configure FreeBSD, so th
On Monday 24 May 2004 11:13 pm, Odhiambo Washington wrote:
> FreeBSD 4.9-STABLE here.
> I have done cvsup several times hoping the problem would go away but
> no. The log of the kernel compiling is here:
>
> http://ns2.wananchi.com/~wash/pain/KERNEL.TXT
>
> Please tell me what you think is screwing
I am in a spot of bother.
I have successfully buildworld, buildkernel and installkernel on 5.2.1-RELEASE... but
when i came to installworld i ran into a problem.
I now know that this was a simple problem with the Makefile, but unfortunately i
cannot go back.
i am now trying to boot into my old
On May 24, 2004, at 9:56 PM, Mike wrote:
Greetings:
This post is a result of 2 days of thrashing trying to get FreeBSD
(4.9) to act as a print server to Win2K/XP clients. I have included
links to a how-to that I wrote that includes a full install and
configuration of CUPS and Samba so that loca
On Mon, 24 May 2004, Gary Kline wrote:
> What kinds of the newer AMD processors worth with FreeBSD? It might be
> better long-run to buy a barebones system than mess with upgrading
> 5-yr-old boxen. I'm thinking of something in the >= 2GHz rangewith
> 512MB and a 60 or 80G drive. So far I've stu
Hi Chris,
Tks for your advice.
> Look into /var/log for a list of files like this
> example:
>
> cron.0.bz2 maillog.1.bz2
> sendmail.st.0
> cron.1.bz2 maillog.2.bz2
> sendmail.st.1
>
> Note the bz2 extensions and the files that have
> digits at th
What file has to run on a remote freebsd box to run MRTG I have MRTG on a FreeBSD
admin box. wanting to get stat from other freebsd box.
Dan
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
I was trying to use sysintall to install additional packages. When specifying the
FreeBSD CD as the source, I get the following error:
Error mounting /dev/acd0 on /dist: Input/Output Error (5)
Whenever I cat /dev/acd0 or try to mount the device to /cdrom I get the same error.
What
* [EMAIL PROTECTED] [2004-05-24 23:58:30 -0500]:
> Is there a way to list files on my system that belong to a certain user. I
> have quotas enabled and cannot find out where all the space is being used.
man find
something like :
find / -type ff -user > username_files should work for you.
--
you have to run an SNMP daemon for the box you want to monitor with MRTG
Dan wrote on 05/24/04 09:51 AM:
What file has to run on a remote freebsd box to run MRTG I have MRTG on a FreeBSD
admin box. wanting to get stat from other freebsd box.
Dan
___
[E
Hi,
How can I enable SNMP in FreeBSD 5.2.1 ?
I am trying to monitor bandwidth usage via MRTG but I always get "SNMP
Error: no response received"
Thanks in advance,
Alper
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
Hi,
Is there an analogue in BSD `make' of the `call' function in `gmake':
$(call VARIABLE,PARAM,PARAM,...)?
Thanks,
Raghavendra.
--
N. Raghavendra <[EMAIL PROTECTED]> | See mail headers for contact
Harish-Chandra Research Institute | and OpenPGP details.
__
Alper Yurdakul wrote:
Hi,
How can I enable SNMP in FreeBSD 5.2.1 ?
I am trying to monitor bandwidth usage via MRTG but I always get "SNMP
Error: no response received"
Thanks in advance,
Alper
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mai
It appears that there are quite a few problems with basic setup and cdrom.
Could someone please post a copy of associated files to give an example of
setup? The kernel.GENERIC is okay for root access to the cdrom, but there are
problems allowing general users access. Just the general associations
I know this question may seem silly.. However, here's my scenario.
I have a very large directory (say, a mail spool) whose directory entry is
approx 606K..
drwx-- 5 cyrus cyrus 606208 May 25 10:29 .
Now.. That directory had a lot of files in it. However, after deleting all
of the files i
On Tue, May 25, 2004 at 07:25:59PM +0530, N. Raghavendra wrote:
> Is there an analogue in BSD `make' of the `call' function in `gmake':
> $(call VARIABLE,PARAM,PARAM,...)?
Not as such. You can however use the '!=' operator to assign a value
to a variable based on the output of some external comm
Hello,
I've got a machine that i need to give two separate addresses to using
two nics, both of which are 3c905's, working fine under 5.2.1. I've got
lines in rc.conf set so they both get their addresses via dhcp, however this
isn't working. Having both cards in the box neither gets an IP, sing
> I have a very large directory (say, a mail spool) whose directory entry is
> approx 606K..
> drwx-- 5 cyrus cyrus 606208 May 25 10:29 .
> Now.. That directory had a lot of files in it. However, after deleting all
> of the files in that directory, the directory entry's size stays the sam
Hi all
A stupid question :
Anyone have some idea when the 5.3 is released ? (juste some idea :
it's in middle of year or end of year)
Regards.
--
Albert SHIH
Universite de Paris 7 (Denis DIDEROT)
U.F.R. de Mathematiques.
Heure local/Local time:
Tue May 25 17:40:22 CEST 2004
In the last episode (May 25), Jason DiCioccio said:
> I know this question may seem silly.. However, here's my scenario.
>
> I have a very large directory (say, a mail spool) whose directory entry is
> approx 606K..
> drwx-- 5 cyrus cyrus 606208 May 25 10:29 .
> Now.. That directory had a
hi all
I'm looking for a cheap sun system to play with solaris 9 and BSD on Ive
seen some on ebay but unsure of what to go 4 and who's trust worthy has
anyone any suggestions of where to get one (needs to be cheap) skint at
the moment
i live in the north of england
arden
___
On Tuesday 25 May 2004 10:41 am, Albert Shih wrote:
> Hi all
>
> A stupid question :
>
> Anyone have some idea when the 5.3 is released ? (juste some idea :
> it's in middle of year or end of year)
>
> Regards.
>
> --
> Albert SHIH
> Universite de Paris 7 (Denis DIDEROT)
> U.F.R. de Mat
Bart Silverstrim wrote:
On May 24, 2004, at 9:56 PM, Mike wrote:
Greetings:
This post is a result of 2 days of thrashing trying to get FreeBSD
(4.9) to act as a print server to Win2K/XP clients. I have included
links to a how-to that I wrote that includes a full install and
configuration of CUP
Hi fellows,
I was running cvsup on a FBSD 4.9-RELEASE #5 box
with the following supfile:
*default host=cvsup6.FreeBSD.org
*default base=/usr
*default prefix=/usr
*default release=cvs tag=RELENG_4_9
*default delete use-rel-suffix
*default compress
src-all
when suddenly all ip connections broke do
I've searched high and low, and have read many times that doing mac
address filtering with ipfw is possible.
I'm running 4.9, have recompiled the kernel with 'options ipfw2', and
have recompiled libalias & ipfw with ipfw2 support.
I've read through the man pages, and I can't make this particula
Hi all,
I've checked the mtx compatibility list, but I can't find any mention of
the tape drives that I'm considering as a replacement for my dead DAT
autochanger. I've e-mailed the mtx list as well, but I thought I'd take
a chance on mailing here as well.
If anyone is running any of the followin
On Tuesday 25 May 2004 10:57 am, Yaraghchi, Stephan wrote:
> Hi fellows,
>
> I was running cvsup on a FBSD 4.9-RELEASE #5 box
> with the following supfile:
>
> *default host=cvsup6.FreeBSD.org
> *default base=/usr
> *default prefix=/usr
> *default release=cvs tag=RELENG_4_9
> *default delete use-re
in message <[EMAIL PROTECTED]>,
wrote Odhiambo Washington thusly...
>
>
> FreeBSD 4.9-STABLE here.
> I have done cvsup several times hoping the problem would go away but no.
> The log of the kernel compiling is here:
>
> http://ns2.wananchi.com/~wash/pain/KERNEL.TXT
I recently compiled 4.9-p8.
Is there a way to see which programs have been swapped out / eg. use up swap ?
I am recently seeing an increase in swap usage where no real change has been made and
I'm just curious if there is anything more to 'swap' then /usr/sbin/swapinfo.
/Stephan
--
Stephan van Beerschoten
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Morning all :)
I was asked by a friend recently if log_in_vain messages could be redirected
to another file besides /var/log/messages. After doing some sleuthing I
pretty much couldn't find anything. The farthest I got was seeing in the
source (/
Hi Remko,
Tks for your advice.
> It says to you that the var drive is full, the var
> drive keeps logs etc
> so pretty crucial that it has some space. Go to
> /var/log and check which
> files are a bit big and "rotate" them. You can do
> that by entering
> single user mode, mount the /var, go
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alper Yurdakul
Sent: Tuesday, May 25, 2004 8:41 AM
To: [EMAIL PROTECTED]
Subject: SNMP in FreeBSD
Hi,
How can I enable SNMP in FreeBSD 5.2.1 ?
I am trying to monitor bandwidth usage via MRTG but I always g
Piotr Gnyp wrote:
My question is:
Is there a way to configure FreeBSD, so the NATed workstations will use
two ISP at once and in case of one ISP failure the whole traffic will be
put on one connection?
Sure, that's a standard multihoming scenario.
Get an AS number (www.arin.net) and set up BGP peer
Warren Block wrote:
Are there any simple utilities that can detect the type of media loaded
in a CD or DVD recorder? For example, a CD-R, or DVD+R, or CDRW. I'd
like to make a backup script auto-sensing.
The sysutils/dvd+rw-tools port comes with dvd+rw-mediainfo...
--
-Chuck
__
dave wrote:
I've got a machine that i need to give two separate addresses to using
two nics, both of which are 3c905's, working fine under 5.2.1. I've got
lines in rc.conf set so they both get their addresses via dhcp, however this
isn't working. Having both cards in the box neither gets an IP,
On Tue, May 25, 2004 at 09:25:34AM -0500, Donald Szatkowski wrote:
> It appears that there are quite a few problems with basic setup and cdrom.
What does this mean? Please elaborate: do you mean that setup
beginning with sysinstall is problematic, in that you cannot use your
cdrom drive during sys
Alas, too late I see this thread :)
I have written (some months ago) a guide covering the installation and
configuration of CUPS+Samba with printing from Windows (2k, NT, XP)
clients via the Samba/Windows Network-Interface (the one where you can
download printer drivers from the print server). I'v
Hi all,
Recently I came across something which kind of bothered me. Every time
when pkg_info removes and/or registers a package it gives this output:
pkg_info: package bsdpan-DBD-mysql-2.9003 has no origin recorded
pkg_info: package bsdpan-DBI-1.42 has no origin recorded
pkg_info: package bsdpan-
Thanks Dan.. However, this does not appear to be happening... I could of
course create a new directory and move everything into it as was suggested
earlier. However, this is more of a curiosity thing than anything.. I'm
wondering if at any point the entry does become truncated, because it
ha
Jorn Argelo wrote:
Recently I came across something which kind of bothered me. Every time
when pkg_info removes and/or registers a package it gives this output:
pkg_info: package bsdpan-DBD-mysql-2.9003 has no origin recorded
pkg_info: package bsdpan-DBI-1.42 has no origin recorded
pkg_info: pack
Hey all,
I have looked into this before but never really found too much info on
it. On one of my FreeBSD boxes I run Squirrelmail. I was told that
there is a Imap Proxy server that can be ran on the local box to help
with some slowness with accessing email. I have installed the Imap
Proxy se
Chuck Swiger wrote:
Jorn Argelo wrote:
Recently I came across something which kind of bothered me. Every
time when pkg_info removes and/or registers a package it gives this
output:
pkg_info: package bsdpan-DBD-mysql-2.9003 has no origin recorded
pkg_info: package bsdpan-DBI-1.42 has no origin re
On Tuesday 25 May 2004 17:57, Elijah A.Chancey wrote:
> I've searched high and low, and have read many times that doing mac
> address filtering with ipfw is possible.
>
> I'm running 4.9, have recompiled the kernel with 'options ipfw2', and
> have recompiled libalias & ipfw with ipfw2 support.
>
>
On Tuesday 25 May 2004 20:06, [EMAIL PROTECTED] wrote:
> Hey all,
> I have looked into this before but never really found too much info on
> it. On one of my FreeBSD boxes I run Squirrelmail. I was told that
> there is a Imap Proxy server that can be ran on the local box to help
> with some s
"Thomas May" <[EMAIL PROTECTED]> writes:
> i have now downloaded the new ports.tar.gz file and if i want to install the
> openssh port, because of the security hole, i see the old version 3.6.1
I don't know which hole you're referring to, but all the ones I've
heard of are fixed by patches that a
On Tue, May 25, 2004 at 12:44:04PM -0400, Chuck Swiger wrote:
>
> Piotr Gnyp wrote:
> >My question is:
> >Is there a way to configure FreeBSD, so the NATed workstations will use
> >two ISP at once and in case of one ISP failure the whole traffic will be
> >put on one connection?
>
> Sure, that's
Uwe Doering <[EMAIL PROTECTED]> writes:
> Edd wrote:
> > I recieved my security run today (as usual) and an error which I have
> > never seen before appeared:
> > hitbox.monsternet.lan kernel log messages:
> >
> >>tabase /etc/aliases.db: No such file or directory
> > A quick locate shows that ther
>
> FWIW, none of my new systems have floppies and the smallest
> has 3 x 40GB HDs. The new HDs all run ATA-133 and have 8MB of
> cache. I have about 40GB of mp3 and wma that I have created
> from CDs that I own and backup on one of the 2400's. It isn't
> the one with the 3-40's :). None of t
In the last episode (May 25), Jason DiCioccio said:
> <[EMAIL PROTECTED]> wrote:
> >In the last episode (May 25), Jason DiCioccio said:
> >>I have a very large directory (say, a mail spool) whose directory entry
> >>is approx 606K..
> >>drwx-- 5 cyrus cyrus 606208 May 25 10:29 .
> >>
> >>No
I installed FreeBSD 4.9-stabel, and used cvs to update everything. And
when I tried to build my personel Kernel by using. Make build
KERNCONF... it came up with the fallowing :
main# cd /usr/src
main# make buildkernel KERNCONF = KERNEL && make installkernel KERNCONF =
KERNEL
make: no target to m
On Tuesday 25 May 2004 11:36 am, Derrick Ryalls wrote:
>
>
> > FWIW, none of my new systems have floppies and the smallest
> > has 3 x 40GB HDs. The new HDs all run ATA-133 and have 8MB of
> > cache. I have about 40GB of mp3 and wma that I have created
> > from CDs that I own and backup on one of
Today I tried to move a 20G drive that is running hapily in a P75 macghine
to a P2.
Unfortunately it would not boot. I got a message like "READ ERROR" early in
the boot process.
I think this must be a bootlaoder issue? I tried booting the machine of a
disk I had just installed FreeBSD on, and ad
At 2:01 PM -0400 5/25/04, Chuck Swiger wrote:
Jorn Argelo wrote:
Recently I came across something which kind of bothered me. Every
time when pkg_info removes and/or registers a package it gives this
output:
pkg_info: package bsdpan-DBD-mysql-2.9003 has no origin recorded
pkg_info: package bsdpan
I am running freebsd on bochs emulator as a guest os, but i can't get it to
recognize my pci devices. here is what happens.
any thoughts?
thanks,
brian
FreeBSD 4.10-RC2 (GENERIC) #0: Fri Apr 30 18:33:49 GMT 2004
testrouter# pciconf -l
pciconf: /dev/pci: Device not configured
Sure you can.
In etc/syslog.conf say
kern.=info /var/log/loginvain.log
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Reuben A.
Popp
Sent: Tuesday, May 25, 2004 12:35 PM
To: [EMAIL PROTECTED]
Subject: Alternate file for log_in_vain
-BEGIN PGP SIGNE
Hi Chris,
I didn't get that far (to run mergemaster).
I started cvsup and in the process of syncing the sources
the ssh session to the machine died...
You're right: The file with the rules for ipf is defined in
/etc/rc.conf which didn't got changed in any way...
My assumption was that once the
Xavier, you should attempt to install the package from the ports tree.
FreeBSD uses the ports tree much like mandrake uses RPM files. The
difference of course is that RPM files are binary packages while the
ports tree simply provides a makefile which will fetch the source,
configure and compile
I'm looking at upgrading my main system from FreeBSD RELENG_4 to RELENG_5_2.
I'll probably start with a clean sate for the system for that transition.
I have a few users who run their own systems on jails on my machine...
My question is:
When I install FreeBSD 5 on my system can I run those Free
Garance A Drosihn wrote:
[ ...snip thread about "pkg_info: ... has no origin recorded" messages... ]
In my case, it was happening on something that I had always
upgraded via ports & portupgrade. It was not bsdpan (which I do
not even have installed...), but I do not remember what it was.
If you in
hi!
on free bsd 5.2
how can i find and start talkd for use it with talk
command ?
can i?
or if i cant - can i use some similar instead ...?
10x in advance.
regards!
__
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
h
On Tue, May 25, 2004 at 14:01:11 EDT, Chuck Swiger scribbled these
curious markings:
> >pkg_info: package bsdpan-DBD-mysql-2.9003 has no origin recorded
> >pkg_info: package bsdpan-DBI-1.42 has no origin recorded
> >pkg_info: package bsdpan-GD-1.19 has no origin recorded
>
> >Should I be worried a
At 4:49 PM -0400 5/25/04, Chuck Swiger wrote:
Garance A Drosihn wrote:
[ ...snip thread about "pkg_info: ... has no origin recorded"
messages... ]
In my case, it was happening on something that I had always
upgraded via ports & portupgrade. It was not bsdpan (which I do
not even have instal
On 25 Apr 2004 00:07:40 -0700
[EMAIL PROTECTED] wrote:
> I have a Shuttle box that (to my surprise) doesn't have a standard PC
> feeper. Has anyone done any work on making the standard bell go
> through a sound card? Has anyone given any thought to what would be
> the right way to do it? Would ad
Garance A Drosihn wrote:
At 4:49 PM -0400 5/25/04, Chuck Swiger wrote:
If you install perl from ports, you apparently get bsdpan included.
Hmm. How would I know if I had it?
I don't seem to have any port with the letters 'pan' in it.
and `locate bsdpan' does not find anything. I guess I don't
rea
Christopher Nehren wrote:
On Tue, May 25, 2004 at 14:01:11 EDT, Chuck Swiger scribbled these
curious markings:
"Elbereth"...? :-)
pkg_info: package bsdpan-DBD-mysql-2.9003 has no origin recorded
pkg_info: package bsdpan-DBI-1.42 has no origin recorded
pkg_info: package bsdpan-GD-1.19 has no origin
Raymond Lillard wrote:
> I just failed at an attempt to pull down the latest sources
> via anoncvs using the instructions found at the URL below.
Hi,
it seems that this server has been shut down due to security concerns.
See this thread on -current for more information:
http://lists.freebsd.org
On Tue, May 25, 2004 at 12:41:47AM -0700, Kent Stewart wrote:
> On Monday 24 May 2004 10:53 pm, Gary Kline wrote:
> > On Mon, May 24, 2004 at 10:30:09PM -0700, Kris Kennaway wrote:
> > > On Mon, May 24, 2004 at 09:45:08PM -0700, Gary Kline wrote:
[[ ... ]]
> It will be slow by modern st
I have taken several existing device driver sources and used them to
create a new device driver. However, I cannot seem to get the system to
probe for my device.
I created a device driver named vsbc which can get configured at either
0x0e0 or 0x1e0 depending on BIOS settings in a PC-104 mobo. Th
I've been using the cvsup/portsdb/portupgrade mantra and have found
problems recently with subversion. Basically I needed to do
make deinstall
SVNREPOS=/svn SVNGROUP=rptdev WITH_APACHE2_APR=1 make install
by hand as portupgrade didn't seem to know what settings it should use.
Is there a way to li
On Tue, May 25, 2004 at 03:38:50PM -0500, Kung Foo Ham[p]?ster wrote:
> When I install FreeBSD 5 on my system can I run those FreeBSD 4 Jails on it and
> then upgrade them individually without much pressure.
Afraid not. The jails have to run the same version of the OS as the
host system.
Kung Foo Ham[p]?ster wrote:
I'm looking at upgrading my main system from FreeBSD RELENG_4 to RELENG_5_2.
I'll probably start with a clean sate for the system for that transition.
I have a few users who run their own systems on jails on my machine...
My question is:
When I install FreeBSD 5 on my sy
On Tue, May 25, 2004 at 01:52:55PM -0700, [EMAIL PROTECTED] wrote:
> hi!
>
> on free bsd 5.2
>
> how can i find and start talkd for use it with talk
> command ?
> can i?
Uncomment the "ntalk" line in /etc/inetd.conf, and:
kill -HUP
--
Jonathan Chen <[EMAIL PROTECTED]>
---
Sorry if this is a repeat.
I sent it about 4 hours agoa, and have yet to see it come back.
Today I tried to move a 20G drive that is running hapily in a P75 macghine
to a P2.
Unfortunately it would not boot. I got a message like "READ ERROR" early in
the boot process.
I think this must be a b
On Tue, May 25, 2004 at 05:57:42PM +0200, Yaraghchi, Stephan wrote:
> Hi fellows,
>
> I was running cvsup on a FBSD 4.9-RELEASE #5 box
> with the following supfile:
>
> *default host=cvsup6.FreeBSD.org
> *default base=/usr
> *default prefix=/usr
> *default release=cvs tag=RELENG_4_9
> *default de
On Tue, May 25, 2004 at 03:38:50PM -0500, Kung Foo Ham[p]?ster wrote:
> I'm looking at upgrading my main system from FreeBSD RELENG_4 to RELENG_5_2.
> I'll probably start with a clean sate for the system for that transition.
>
> I have a few users who run their own systems on jails on my machine..
On Mon, 2004-05-24 at 13:05, Bob Collins wrote:
> I am looking for a nice Open Source app like Microsloth's Project. I
> have Googled a bit and find nothing interesting. Do any of you have a
> suggestion for such a thing, assuming it even exists? Of course, I would
> also like to run it on FBSD, bu
On Mon, May 24, 2004 at 12:10:16PM -0400, JJB wrote:
: The log-in-vain feature is an good thing to keep. In your case it is
Okay, I'll put it back, then.
: The other post about firewall rules has nothing to do with your
: problem. The poster just did not recognize the messages as coming
: from th
On Mon, May 24, 2004 at 08:50:17AM -0400, JJB wrote:
: The messages you are getting are generated from the log-in-vain
: option you have turned on. Every night when the cron management
: reports run they post email from root to root using the 127.0.0.1
If I disable this 'feature' and adjust my fil
On Tue, May 25, 2004 at 01:40:36PM -0500, Earl Larsen wrote:
> I installed FreeBSD 4.9-stabel, and used cvs to update everything. And
> when I tried to build my personel Kernel by using. Make build
> KERNCONF... it came up with the fallowing :
It looks like you've accidentally updated your sourc
Hello,
Which release of FreeBSD by standard has GCC 3.3.3 or higher?
Otherwise, are there any decent guides of how to setup GCC properly after upgrading
2.95 (FreeBSD 4.8-RELEASE). I've had major troubles since updating it - that things
aren't being recognised as new - and have had to use symbo
[EMAIL PROTECTED] wrote:
> Which release of FreeBSD by standard has GCC 3.3.3 or higher?
5.2.1 has GCC 3.3.3 - don't know whether some lower versions of FreeBSD
5.x also had it (they're all GCC 3.x based), but you wouldn't want to
install anything below 5.2.1 anyway (if you decide to go for FreeBS
M I thought that mrproject was in the ports tree .. but I cant find
it...
Im sure I had it installed once when I was running Gnome rather than KDE
as I do now
On Wed, 2004-05-26 at 10:01, Frank Knobbe wrote:
> On Mon, 2004-05-24 at 13:05, Bob Collins wrote:
> > I am looking for a nice Op
hi to everyone,
I have been using my freebsd system for almost 7-8 months.
I have read in my internal help documents about newbies that I should run
#periodic monthly #periodic weekly #periodic daily from time to time...I
still have not really grasp the importance of it but I have developed the
sendmail-8.12.11
freeBSD-4.9-STABLE
I must be doing something wrong. SMTP AUTH is not working very well for me.
I have been trying to authenticate with user and password to port 25.
I prefer to send all auth user and password information with SSL encryption.
would like SSL Version 3 encryption
Hello. A friend of mine is running 5.1-REL and has somehow managed to get
some serious corruption on her package database. It's more than I've come
across before so I wanted to find out the easiest way to clean this up.
The way things stand now, she gets lots of stale dependency errors when
doing
Aloha
I have a little annoyance on one of my boxes. The box has an Asus
P4P800 mobo with a 2.6GHz P4 and 1GB of DDR-400 Ram. I have FreeBSD
5.2-RC1 loaded on a 120Gig SATA Hard disk. My ouput of uname -a:
p4# uname -a
FreeBSD p4.hawaii.rr.com 5.2-RC1 FreeBSD 5.2-RC1 #0: Sun Dec 7 22:15:14
GMT
On Tue, 25 May 2004, Noah wrote:
sendmail-8.12.11
freeBSD-4.9-STABLE
I must be doing something wrong. SMTP AUTH is not working very well for me.
I have been trying to authenticate with user and password to port 25.
I prefer to send all auth user and password information with SSL encryption.
would
On Tue, 25 May 2004 17:58:04 -1000
[EMAIL PROTECTED] spake thus:
> Aloha
>
> I have a little annoyance on one of my boxes. The box has an Asus
> P4P800 mobo with a 2.6GHz P4 and 1GB of DDR-400 Ram. I have FreeBSD
> 5.2-RC1 loaded on a 120Gig SATA Hard disk. My ouput of uname -a:
>
> p4# uname
1 - 100 of 106 matches
Mail list logo