Subhro wrote:
> cat /etc/make.conf ?
>
> Regards
> S.
CPUTYPE=p3
CFLAGS= -O -pipe
CXXFLAGS+= -fmemoize-lookups -fsave-memoized
BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
-Wcast-qual -Wchar-subscripts -Winline \
-Wmissing-prototype
Eric Anholt wrote:
> On Wed, 2004-09-15 at 07:08, Mathias Samuelson wrote:
>
>>Cheers to all!
>>
>>I'm having problems building xorg-clients.
>>
>>I'm not quite following the instructions in UPDATE, I want to prebuild
>>as much as possible before I delete XFree and then run make install in
>>x
On Thursday 16 September 2004 02:21 am, Giorgos Keramidas
proclaimed:
> On 2004-09-15 18:14, Mike Hauber <[EMAIL PROTECTED]>
wrote:
> > I seem to remember this question asked before (mayhaps
> > a different OS), but I'm not finding it anywhere (my
> > wording is off?)
> >
> > Is there any way to
Hello,
I'm not sure what's next: hedgehogs falling from the skies, perhaps? Mostly, I know
I'm flailing around in the newbie waters, an otherwise straightforward 5.2.1 install
(single user, desktop) gone horribly, horribly wrong. The story so far...
I got through most of the sysinstall program
Happened to me once needed to set the the speed of the nic card in
rc.conf can not remember how to do it but it is in the man rc.conf page
and solved my similar problem. Looks something like this if i can recall
ifconfig_xl0="inet 209.155.173.22 something about manually setting the
speed and m
On Wed, Sep 15, 2004 at 02:59:38PM -0700, Mari Cariapa wrote:
> It takes about 15 seconds which normally should just take 2-3 seconds.
> Any idea on how I can fix this?
probably a dns issue
hth
toni
--
Wer es einmal so weit gebracht hat, dass er nicht | toni at stderror dot at
mehr irrt, der h
Hello all,
My PC is (or rather until Sunday, WAS) running 5.2.1#9. I edited the
kernel to reflect my installed hardware and add support for the PF
firewall and then did a CVSup for sources - keeping to 5.2.1. This
isn't the first kernel edit and upgrade I've done but as far as I recall
the on
On Wed, Sep 15, 2004 at 02:56:41PM -0400, John Cholewa wrote:
> I started "portupgrade -ra" on my home mail server (FreeBSD
> 5.2.1-RELEASE) two or three hours ago. It says "[Updating the pkgdb
> in /var/db/pkg ... - 246 packages found (-0 +1) .
> done]", and the output hasn't changed since.
My cdda2wav did not work under user (but work under root).
I was trying to set suid bit but don't take success. What do yuo
think about?
--- begin paste of my tty -
[emin:~]$ cat /etc/fbtab
/dev/ttyv0 0660 /dev/fd0:/dev/acd0
[emin:~]$ ll /dev/{a,}cd0
crw-rw 1 emin emin4, 1
I have nforce2-based motherboard Abit NF7 and run 5.2.1-RELEASE on that
system. I have tried to enable APIC by compiling kernel with 'device
apic' (both with and without SMP option, although this is a UP system),
but system just freezes during boot with it. Everything works pretty
well without API
-Original Message-
Hello all,
My PC is (or rather until Sunday, WAS) running 5.2.1#9. I edited the
kernel to reflect my installed hardware and add support for the PF
firewall and then did a CVSup for sources - keeping to 5.2.1. This
isn't the first kernel edit and upgrade I've done but
Hi..
When im trying to run pkg_add im getting
Steven Adams [EMAIL PROTECTED]
DriftNet Web Services http://www.drifthost.com
Home: +61 2 94274857
Fax: +61 2 94274857
Mobile +61 (0) 404 085644
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.o
Hi..
When im trying to run pkg_add im getting
/libexec/ld-elf.so.1: Shared object "libssl.so.3" not found
Does anyone know what this mean and how I install it.
Steven Adams [EMAIL PROTECTED]
DriftNet Web Services http://www.drifthost.com
Home: +61 2 94274857
Fax: +61 2 94274857
Mobile +61 (0
This is an automatic reply. Feel free to send additional
mail, as this program shouldn't reply to you more than
once or twice. The following is a prerecorded message,
sent for coke:
Hi,
This is an automated reply from the account for the CMU CS coke
machine. No one currently reads mail sent t
-- quoting Mari Cariapa --
> It takes about 15 seconds which normally should just take 2-3 seconds.
> Any idea on how I can fix this?
That's normal, if your ssh server can't resolve client's IP address to a
valid host name (= reverse DNS lookup).
You have two options:
1.) Ask you
Thursday, September 16, 2004, 3:27:54 AM, Lowell Gilbert <[EMAIL PROTECTED]> wrote:
>Konstantin <[EMAIL PROTECTED]> writes:
>> When I try to play AudioCD with cdplay 0.92 I receive the following message:
>What happens when you use the (standard) cdcontrol(1) to play a CD?
Thanks for your notice
Wednesday, September 15, 2004, 9:49:01 PM, mailing lists at ManTutor <[EMAIL
PROTECTED]> wrote:
> Q: Are you compiling for the correct processor in your kernel
> configuration? For example, if you have a i586 you don't want to
> compile for an i686.
> abs
Thanks for your notice to my problem!
HI,
I am developing USB device firmware and would like to use freeBSD 4.9 to debug my
device.
There I just want to see what is going on(if descriptors and all other stuff are send
ok) on USB when I attach my device.
I know it is possible to do that with BSD and hope you can help me how.
best
Hi,
Anyone know how to sync Plam Tungsten T2 under
FreeBSD.
I'm using FreeBSD4.10. I'v tried the ColdSync under
freebsd, but failed.
Thanks.
=
Regards,
Ye Wei
_
Do You Yahoo!?
150万曲MP3疯狂搜,带您闯入音乐殿堂
http://cn.rd.yahoo.com/mail_cn/ta
Andriy Gapon wrote:
I have nforce2-based motherboard Abit NF7 and run 5.2.1-RELEASE on that
system. I have tried to enable APIC by compiling kernel with 'device
apic' (both with and without SMP option, although this is a UP system),
but system just freezes during boot with it. Everything works pret
Ray Smith wrote:
Hi all,
Apologies for the cross posting.
Accepted. Obligatory disclaimer is that it's really not
an "on topic" post for the "newbies" list; the charter for
that list suggests rather strongly that technical issues
be discussed on [EMAIL PROTECTED]
While I'm at it ;-), it's good eti
Ray Smith wrote:
Hi all,
Apologies for the cross posting.
Accepted. Obligatory disclaimer is that it's really not
an "on topic" post for the "newbies" list; the charter for
that list suggests rather strongly that technical issues
be discussed on [EMAIL PROTECTED]
While I'm at it ;-), it's good eti
On Wed, Sep 15, 2004 at 07:33:51PM +, clayton rollins wrote:
> Hi all,
>
> During a recent portupgrade, I got a hard crash of some sort...
> (I was out of the room, and the machine was sounding an alarm
> when I came back.)
>
> At any rate, portupgrade was probably altering the package
> data
Hi all. I am quite new to FreeBSD and I need a little
help. I have an ACER TravelMate 2501LC laptop. I
installed 4.10 RELEASE version but I have a problem
configuring XServer.
The specificatios of the display are 14.1"/15.0" TFT
displaying at 1028x768 XGA or 1400x1050 SXGA+ and the
chipset is ATI
mailing lists at MacTutor wrote:
I have a machine running 4.10-STABLE that will be a dedicated gateway
with a router/firewall combo and web server plus mysql server (maybe).
What would be the pros and cons of running this system single user?
Processes that run under their own uid, would they be
Konstantin <[EMAIL PROTECTED]> writes:
> Thursday, September 16, 2004, 3:27:54 AM, Lowell Gilbert <[EMAIL PROTECTED]> wrote:
>
> >Konstantin <[EMAIL PROTECTED]> writes:
>
> >> When I try to play AudioCD with cdplay 0.92 I receive the following message:
>
> >What happens when you use the (standa
on 16.09.2004 15:46 yuri van Overmeeren said the following:
> 5.2.1 freezes on a nforce2 mainboard with apci, I have a nforce2 (same
> abit board) based machine here running freebsd, never got the
> 5.2.1-release to work with acpi.
> It was fixed a little while after the release, 5-current has bee
On Thu, Sep 16, 2004 at 08:49:29PM +1000, Steven Adams wrote:
> When im trying to run pkg_add im getting
>
> /libexec/ld-elf.so.1: Shared object "libssl.so.3" not found
>
> Does anyone know what this mean and how I install it.
Well, the error message means that the dynamic loader (ld-elf.so)
ca
Thanks for your reply.
Ive managed to fix it by copying libssl.so.3 from another freebsd server I
am running, to my surprise it works fine now.
Dunno how it went missing, think it was something cpanel done.
Thanks tho!
Steven Adams [EMAIL PROTECTED]
DriftNet Web Services http://www.drifthost.c
To whom it may concern at Free BSD,
I was wondering if you have the Handbook in a PDF format that I can download to make
it easier to print the hand book out?
Thanks much
Doug
---
If you reply to this email, inc
On Thursday 16 September 2004 08:38, Doug Paquette wrote:
> To whom it may concern at Free BSD,
>
> I was wondering if you have the Handbook in a PDF format that I can
> download to make it easier to print the hand book out?
>
> Thanks much
>
> Doug
ftp://ftp.freebsd.org/pub/FreeBSD/doc/handbook
On Thu, Sep 16, 2004 at 08:38:19AM -0500, Doug Paquette wrote:
> I was wondering if you have the Handbook in a PDF format that I can
> download to make it easier to print the hand book out?
ftp://ftp.freebsd.org/pub/FreeBSD/doc/en_US.ISO8859-1/books/handbook/
It's available there in several
You haven't given us any information about what you've done (or tried to
do), so I'll do a little guessing.
There are several utilities for configuring X, but xf86cfg (the
graphical utility) is most newbie friendly, in my opinion. You can also
access it through sysinstall. I have found that it oft
On Thu, 16 Sep 2004, Ed Budd wrote:
> mailing lists at MacTutor wrote:
> > I have a machine running 4.10-STABLE that will be a dedicated gateway with a
> > router/firewall combo and web server plus mysql server (maybe). What would
> > be the pros and cons of running this system single user? Proces
>
> I have a machine running 4.10-STABLE that will be a dedicated gateway
> with a router/firewall combo and web server plus mysql server (maybe).
> What would be the pros and cons of running this system single user?
> Processes that run under their own uid, would they be able to run?
>
> Just
On Wednesday 15 September 2004 08:33, Anthony Philipp wrote:
> After burning trying to burn a cd with too much information on it, it ended up with
> this error.
>
> only wrote -1 of 37632 bytes: Input/output error
>
> burncd: ioctl(CDRIOCFLUSH): Input/output error
>
> But the cd was stuck in
On Thursday 16 September 2004 13:13, Eugene M. Minkovskii wrote:
> My cdda2wav did not work under user (but work under root).
> I was trying to set suid bit but don't take success. What do yuo
> think about?
There is a workaround for this problem since cdda2wav 2.01a38.
Just update.
Regards
Fabi
On Thu, Sep 16, 2004 at 04:16:53PM +0200, Fabian Keil wrote:
> On Wednesday 15 September 2004 08:33, Anthony Philipp wrote:
>
> > After burning trying to burn a cd with too much information on it, it ended up
> > with this error.
> >
> > only wrote -1 of 37632 bytes: Input/output error
> >
> >
RYAN vAN GINNEKEN wrote:
Happened to me once needed to set the the speed of the nic card in
rc.conf can not remember how to do it but it is in the man rc.conf page
and solved my similar problem. Looks something like this if i can recall
ifconfig_xl0="inet 209.155.173.22 something about manually
> Date: Wed, 15 Sep 2004 12:21:29 +0930
> From: Tim Aslat <[EMAIL PROTECTED]>
> Subject: Re: increasing failed sshd logins/clearing breadcrumb trails
> To: [EMAIL PROTECTED]
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain; charset=US-ASCII
Tim Aslat <[EMAIL PROTECTED]> once said:
>
>
On 2004-09-16 09:11, Ed Budd <[EMAIL PROTECTED]> wrote:
> er...doesn't "single user" mode mean no networking? My understanding is
> that this is really only for maintenance (ie. make installworld, etc.),
Well, you can always bring up the network interfaces manually ;-)
___
Trying to take my mind off my server exploit issue...
I'm trying to configure an ATI Radeon 9000 64mb AGP video card with
Xorg on a FreeBSD5.3beta2 workstation. No matter which config option I
choose ('Xorg -configure', 'xorgcfg -textmode', xorgconfig), when I
test the generated .conf file, the sc
jan, I agree with what you say about tuning the startup scripts. In my
relatively limited experience as a system admin., I think this is the
'better' thing to do. Perhaps you would agree. My next step is to
understand the kernel security levels and what each one entails. But,
that I can, hopefu
Hi
I am running a Firewall / router / wireless freeBSD
5.2.1 pII 300.
i.e it supplies net access for my LAN..
It has a wireless connection for internet that
sometimes goes down and i wanted to get a backup
internet connection for it - either DSL or ISDN.
How can i enable it to use 2 differen
--- Volker Kindermann <[EMAIL PROTECTED]> wrote:
> > My question is, how to proceed after that ? What
> do I
> > have to do to create the chroot environment. And
> what
> > option I should enclude in the main.cf to make
> postfix
> > start chrooted.
>
> look at master.cf. There you can determine,
Thank you for your message.
I'm out of office today and will return on Thursday,16 September. Please note that in
the meantime messages won't neither be read nor answered.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/fre
I've just been given a whole bunch of binaries that had been
compiled under FreeBSD 3.4 and asked to make them run under
our modern 4.10 systems.
I'm considering a couple of options + was hoping for some
commentary on them:
1) setup a chroot environment with the old 3.x system
(using the destdir
Hello,
This was in fact a server issue, which seemed specific to the US anoncvs server.
I ran the same commands, however, I used the German anoncvs server, as seen below:
setenv CVSROOT [EMAIL PROTECTED]:/home/ncvs
I was able to successfully synchronize my source with no errors.
Thank you ver
how do I tell the php4 port to include mhash?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Thu, Sep 16, 2004 at 10:57:44AM +0200, Owen.G wrote:
> Hello all,
>
> My PC is (or rather until Sunday, WAS) running 5.2.1#9. I edited the
> kernel to reflect my installed hardware and add support for the PF
> firewall and then did a CVSup for sources - keeping to 5.2.1. This
> isn't the f
On Thu, Sep 16, 2004 at 02:30:21PM +0200, Alex de Kruijff wrote:
> On Thu, Sep 16, 2004 at 10:57:44AM +0200, Owen.G wrote:
> > Hello all,
> >
> > My PC is (or rather until Sunday, WAS) running 5.2.1#9. I edited the
> > kernel to reflect my installed hardware and add support for the PF
> > firew
On Thu, Sep 16, 2004 at 06:01:13PM +0300,
Giorgos Keramidas probably wrote:
> On 2004-09-16 09:11, Ed Budd <[EMAIL PROTECTED]> wrote:
> > er...doesn't "single user" mode mean no networking? My understanding is
> > that this is really only for maintenance (ie. make installworld, etc.),
>
> Well, y
Now might be a good time for me to point out that I'm learning some
subtle and useful things about system startup that is helping me think
about how I might customize system start up if I go that route.
Thanks to everyone who's responding.
alex
On Sep 16, 2004, at 1:31 PM, Sergey Zaharchenko wro
John DeStefano said the following on 9/16/2004 10:40 AM:
The easiest way to protect this is to check your sshd_config and
set:
PermitRootLogin no
Interestingly, this option did not exist in my config file (I added
it), but all other options were commented out. Is this the defaul
On 2004-09-16 13:39, mailing lists at MacTutor <[EMAIL PROTECTED]> wrote:
>On Sep 16, 2004, at 1:31 PM, Sergey Zaharchenko wrote:
>>On Thu, Sep 16, 2004 at 06:01:13PM +0300,
>>Giorgos Keramidas probably wrote:
>>>On 2004-09-16 09:11, Ed Budd <[EMAIL PROTECTED]> wrote:
er...doesn't "single user"
We have several Dell-based systems that are dual-processor capable, but have
only one processor. The FreeBSD 4.9 kernels for each system is compiled with
SMP support, even though there is only one processor on each system right
now.
Would this actually reduce performance on a single processor syst
Tim Pushor wrote:
I would also have to make sure that the USB subsystem (and probably
the serial devices as AFAICT the USB driver for the lcd looks like a
serial port to applications) was loaded as early on as I could so I
could use it for most of the FreeBSD startup - and what about the
shutd
On Thu, Sep 16, 2004 at 08:53:03PM +0300,
Giorgos Keramidas probably wrote:
> On 2004-09-16 13:39, mailing lists at MacTutor <[EMAIL PROTECTED]> wrote:
> >On Sep 16, 2004, at 1:31 PM, Sergey Zaharchenko wrote:
> >>On Thu, Sep 16, 2004 at 06:01:13PM +0300,
> >>Giorgos Keramidas probably wrote:
> >>
[EMAIL PROTECTED] wrote:
Hello,
I'm not sure what's next: hedgehogs falling from the skies, perhaps? Mostly, I know
I'm flailing around in the newbie waters, an otherwise straightforward 5.2.1 install
(single user, desktop) gone horribly, horribly wrong. The story so far...
And what have you
On Thursday 16 September 2004 15:44, Matthew Seaman wrote:
> On Thu, Sep 16, 2004 at 08:38:19AM -0500, Doug Paquette wrote:
> > I was wondering if you have the Handbook in a PDF format that I can
> > download to make it easier to print the hand book out?
>
> ftp://ftp.freebsd.org/pub/FreeBSD/do
So, I just installed bandwidthd on FreeBSD 5.3-Beta. I don't have
Apache installed on this system, however, and maybe that's why I can't
access the web page for this from another computer. I was thinking that
it maybe provided it's own web engine as I would like to avoid
installing apache on th
In the last episode (Sep 16), [EMAIL PROTECTED] said:
> I've just been given a whole bunch of binaries that had been compiled
> under FreeBSD 3.4 and asked to make them run under our modern 4.10
> systems.
>
> I'm considering a couple of options + was hoping for some
> commentary on them:
>
> 1)
how do i install a jvm on freebsd, which ports dir in /java?
[EMAIL PROTECTED] backupsw]# sh install.bin
Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
No Java virtual machine could be found fro
> So, I just installed bandwidthd on FreeBSD 5.3-Beta. I don't have
> Apache installed on this system, however, and maybe that's why I can't
> access the web page for this from another computer. I was thinking
> that
> it maybe provided it's own web engine as I would like to avoid
> installing apac
Running 4.10-STABLE as of today. I have the following in /etc/rc.conf:
gif_interfaces="gif0"
gifconfig_gif0="A.B.C.D W.X.Y.Z"
ifconfig_gif0="inet 192.168.101.1 192.168.102.1 netmask 0x"
After a boot I see:
# ifconfig gif0
gif0: flags=8051 mtu 1280
tunnel inet A.B.C.D --> W.X.Y.
On Thu, Sep 16, 2004 at 11:54:40AM -0700, Curtis Vaughan wrote:
> So, I just installed bandwidthd on FreeBSD 5.3-Beta. I don't have
> Apache installed on this system, however, and maybe that's why I can't
> access the web page for this from another computer. I was thinking that
> it maybe provid
* Gary Aitken <[EMAIL PROTECTED]> [0911 20:11]:
> Scott Gerhardt wrote:
> >
> >On Sep 15, 2004, at 12:19 PM, Curtis Vaughan wrote:
> >
> >>I have a question about what exactly I should backup on my 5.3 FreeBSD
> >>Server. So far I have chosen the following directories for full
> >>backup. But pe
To answer my own question, I also needed to add gif0 to network_interfaces:
network_interfaces="xl0 xl1 lo0 gif0"
Mark Thomas
[EMAIL PROTECTED]
-Original Message-
From: Mark Thomas [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 16, 2004 3:10 PM
To: [EMAIL PROTECTED]
Subject: rc.con
Andriy Gapon wrote:
on 16.09.2004 15:46 yuri van Overmeeren said the following:
5.2.1 freezes on a nforce2 mainboard with apci, I have a nforce2 (same
abit board) based machine here running freebsd, never got the
5.2.1-release to work with acpi.
It was fixed a little while after the release, 5-
Is there anyone out there who has this working and would help
me diagnose why mine isn't?
I've got the port installed. The problem seems to be with the
command line core and why it won't talk to the GUI.
Robert Huff
On Thu, 16 Sep 2004 13:09:22 -0500, adp wrote
> We have several Dell-based systems that are dual-processor capable,
> but have only one processor. The FreeBSD 4.9 kernels for each
> system is compiled with SMP support, even though there is only one
> processor on each system right now.
>
> Woul
Vulpes Velox wrote:
I know it can easily handle 160GB drives as I have some. It should
handle 200GB just fine.
I've got a 250gb happily running in my fileserver, has been for a good
while now :)
-
Mike Woods
IT Technician
___
[EMAIL PR
On Thu, 16 Sep 2004 14:14:55 +0300
Andriy Gapon <[EMAIL PROTECTED]> wrote:
>
> I have nforce2-based motherboard Abit NF7 and run 5.2.1-RELEASE on
> that system. I have tried to enable APIC by compiling kernel with
> 'device apic' (both with and without SMP option, although this is a
> UP system),
On 2004-09-16 22:13, Sergey Zaharchenko <[EMAIL PROTECTED]> wrote:
> On Thu, Sep 16, 2004 at 08:53:03PM +0300, Giorgos Keramidas wrote:
> > Hmmm. Don't get me wrong, but you shouldn't "go that route".
>
> I thought `that route' == `customize system start up' according to the
> scoping rules:)
Act
Hello,
I am atempting to install 4.10 on my laptop. After booting from the
install CD I get a message stating "cannot find kernel". I get this
error whether I use the miniinstall or the full 2 disc CD install.
Browsing the CDs I can see that the kernel does exist on the disk.
I have read many of
Hi,
I wonder if there is a comprehensive list of what many of the sysctl
values are, both in terms of what the node (by this I mean, say,
hw.acpi.verbose) means, and what the values would mean/do?
If this doesn't exist would it be worth creating a website with a list
of all these? I've got som
Hi all,
I've been wondering why I cant seem to get more than approx
180k(bytes)/sec from my freebsd server with a netgear MA311 pci card in
hostap. After some googling After some googling the evidence seems to
point at me having rather ancient firmware.
(23:46:36 <~>) 0 # dmesg |grep wi0
wi
I recently purchased a Creative Labs Sound Blaster MP3+ which seems to
work OK under FreeBSD 5.3-BETA. A couple of exceptions, though. It
only seems to understand 48KHz and have to convert 44.1KHz -> 48KHz or
else the device locks up. I can live with this. My concern is that
when booting ve
Hello,
I am writing to inquire about a hard drive encryption software that is compatible with
FreeBSD. We have been using PointSEC with windows and am looking for a similar
solution for FreeBSD. I see you have GEOM Based Disk Encryption (gbde) Which I
have read about on your web site,
Lewis Thompson wrote:
I wonder if there is a comprehensive list of what many of the sysctl
values are, both in terms of what the node (by this I mean, say,
hw.acpi.verbose) means, and what the values would mean/do?
'sysctl -d -a hw' will give a one-line description for many of the sysctls,
and it'
Adam Beachell wrote:
I am atempting to install 4.10 on my laptop. After booting from the
install CD I get a message stating "cannot find kernel". I get this
error whether I use the miniinstall or the full 2 disc CD install.
Browsing the CDs I can see that the kernel does exist on the disk.
I have r
Keep getting this error in my dmesg
ata1-slave: ATA identify retries exceeded
this is for my cdrom drive and it is not working can someone give me
some hints on how to trouble shoot. The jumpers are set right and i
have replace the cable but still get the error. Here is the intire
dmseg dump
"adp" <[EMAIL PROTECTED]> writes:
> We have several Dell-based systems that are dual-processor capable, but have
> only one processor. The FreeBSD 4.9 kernels for each system is compiled with
> SMP support, even though there is only one processor on each system right
> now.
>
> Would this actuall
Nick Evans wrote:
The card is a 9500-12 despite the driver saying otherwise. The array is
built at 2.7T through the 3ware bios. bsdlabel just refuses to accept a
label larger than 700-something gig.
http://www.freebsd.org/projects/bigdisk/
___
[EMAIL PRO
One thing you could try is editing /etc/X11/xorg.conf and substituting
"vesa" for "ati". It's not an ideal solution, but the vesa driver often
works when nothing else will. You might want to take a look at
/usr/X11R6/lib/X11/doc/README.ati, and list all video drivers in
/usr/X11R6/lib/modules/drive
You ought to consider subscribing to the freebsd-mobile mailing list.
This isn't a RTFM reply - that really is a useful list and I'm
subscribed to it myself. Also, you can search the freebsd-mobile mailing
list (and all the other mailing lists):
http://www.freebsd.org/search/search.html#mailinglis
Howdy. I am attempting to create a FreeBSD cluster. My first step is
to come up with a bootable CD (which I have done) that will run a
script to create one giant partition (for simplicity, since not all
hard drives are the same size), run newfs on it, mount it, and copy
the desired tree to it. I
Robert Storey wrote:
> One thing you could try is editing /etc/X11/xorg.conf and substituting
> "vesa" for "ati". It's not an ideal solution, but the vesa driver often
> works when nothing else will. You might want to take a look at
> /usr/X11R6/lib/X11/doc/README.ati, and list all video drivers in
Hello,
Why can I no longer put in the compat3, compat4 stuff? Some of my older
programs are crashing since the upgrade to 4.10.
ROger
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
stheg olloydson said:
> it was said:
>
> > ... I started seeing all kinds of errors when
> > trying to copy more than 16383 messages into one
> > of my folders there. I'm retrieving mail from a
> > pop3 server using Outlook then copying them into
> > my imap folder, also using Outlook.
>
> Hello
In the last episode (Sep 16), Roger Williams said:
> Hello,
> Why can I no longer put in the compat3, compat4 stuff? Some of my older
> programs are crashing since the upgrade to 4.10.
You can still install compat3x if you comment out the "FORBIDDEN" line
in the port Makefile. The reason it's
On Fri, Sep 17, 2004 at 03:05:20AM +0800, John Lee wrote:
> how do i install a jvm on freebsd, which ports dir in /java?
Try using /usr/ports/java/jdk1.4, and follow the instructions when you
try to install the port.
--
Jonathan Chen <[EMAIL PROTECTED]>
---
Sorry John, I apologize for not reading all the to the bottom of your
post.
The only other thing I'd suggest is playing with xvidtune. I had to do
this to get my screen to center properly. The frustrating thing with
xvidtune is that it doesn't automatically save the adjustments you make
- you have
On Friday 17 September 2004 00:51, Lewis Thompson wrote:
> Hi,
>
> I wonder if there is a comprehensive list of what many of the sysctl
> values are, both in terms of what the node (by this I mean, say,
> hw.acpi.verbose) means, and what the values would mean/do?
I don't think there is. At the ver
If I use this setting on the DMZ firewall would it affect a web server
running in the DMZ behind the FW ? The web server IP/port would be
redirected into the DMZ by natd, or does this only break SYN+FIN if the
web server is running on the same box ?
As stated in LINT:
# TCP_DROP_SYNFIN adds suppo
Ok This is an update on my Problem getting this network card working.
as stated previously..:
> Hello everyone,
> back in the days of 5.1.xxx my 3com CFM656B
> (That's not the exact model
> number sorry but it's in my machine at home at the
> moment.) worked
> beautifully. I had changed to the
If I repeatedly nmap my FreeBSD 4.10 machine configured with ipfirewall,
I get the message "Too many dynamic rules, sorry". Doing a sysctl -a
|grep ip.fw I can see the the net.inet.ip.fw.dyn_count has reached the
max value of 8192 that I set. The net.inet.ip.fw.dyn_ack_lifetime is set
to 300, so th
.
- Original Message -
From: "Norm Vilmer" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, September 16, 2004 11:57 PM
Subject: Too many dynamic rules, sorry
If I repeatedly nmap my FreeBSD 4.10 machine configured with
ipfirewall,
I get the message "Too many dynamic rules, s
I have two questions for the list.
I am looking to make a RAID MIRROR using my built in HPT374 raid
controller on my ABIT AT7-MAX motherboard. I will be installing the OS,
MySQL, BIND9, POSTFIX2, APACHE2, PHP4, and MONO.
I realize I should use separate drives. I will when I have the money.
So my
Greetings,
I want to post some info on a mini-itx mobo I bought,
so other users can benefit from that. can I post that
to freebsd-questions@ ? If not what's the right list ?
___
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http:/
1 - 100 of 101 matches
Mail list logo