to install. I've
tried new ribbon cables, swapping from primary master to secondary. I've
checked the bios a dozen times. Everything looks normal. What am I
missing?
Thanks for the time
Bryan
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 /
only offer drivers for RedHat Enterprise and SuSE Enterprise.
Thanks,
Bryan
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I just reinstalled 6.1_RELEASE from ISO cd1 with XFCE4 an Xorg from t
sysinstall downloading from ftp.
After running xorgconfig using 'same as always' settings I run the test.
X -config /etc/X11/xorg.conf
I get this error
FATAL ERROR:
could not open default font 'fixed'
Did I forget to load
I have an old TCL/TK Script That I wrote several years ago that sends
data out of a serial port into a Radio Shack Pro-64 scanner. The program
basically programs the scanner with frequencies to listen to.
I cant figure out how to make it work in FreeBSD. The port must be
configured as follows
Ted Mittelstaedt wrote:
stty speed 2400 -hup cs8 -parenb -clocal -f /dev/ttyd0
cat dload.txt > /dev/ttyd0
also the scanner must assert DTR when it's turned on.
Ted
- Original Message -
From: "Bryan" <[EMAIL PROTECTED]>
To:
Sent: Saturday, June 24, 2006
Here is the output from dmesg on my DVD
acd0: DVD-ROM at ata1-master PIO4
Using FreeBSD 4.8
When I play a DVD with mplayer (usually with these options)
mplayer -brightness 9 -autosync 30 -dvd 1 /dev/dvd
I can play the DVD without ANY problems what so ever. The problem is
this. Say I just boot
I get these in my log (messages) when I play DVDs. The movie plays fine, without any
problem what so ever.
Nov 9 20:16:46 bellsouth /kernel: acd0: READ_DVD_STRUCTURE - ILLEGAL
REQUEST asc=0x30 ascq=0x02 error=0x04
Nov 9 20:17:17 bellsouth /kernel: acd0: READ_DVD_STRUCTURE - ILLEGAL
REQUEST asc
Trying to figure out how to find out the size of a file.
thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Thanks. Just what I was looking for.
On Wed, 12 Nov 2003 23:12:30 +0100
Jakob Breivik Grimstveit <[EMAIL PROTECTED]> wrote:
> On Thu, 2003-11-13 at 00:01, Bryan Cassidy wrote:
>
> > Trying to figure out how to find out the size of a file.
>
> Try...
>
I am currently using FreeBSD 4.8-RELEASE and I did a cvsup
/usr/share/examples/cvsup/standard-supfile to a RELENG_4_8. I haven't done a
build/install world and finished the update of the system. What I'm wondering is sence
I did a cvsup to the latest security patches etc for 4.8 should I go on a
I am currently using FreeBSD 4.8-RELEASE and I did a cvsup
/usr/share/examples/cvsup/standard-supfile to a RELENG_4_8. I haven't
done a build/install world and finished the update of the system. What
I'm wondering is sence I did a cvsup to the latest security patches etc
for 4.8 should I go on and
Is there a stand-alone dictionary port? I would like to have one on the
pc cause im gettin tired of goin online. thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL
I used FreeBSD 4.8 without any problems with GPGME + Sylpheed. This last
time using 4.8 I didn't install/configure gpgme + sylpheed but I did a
update to 4.9 and set this up but I get an error in Sylpheed saying
"Error could not find any key associated with currently selected key id
I really need to get printing working on FreeBSD 4.9. Let me say that
again. I got FreeBSD to print with my HP OfficeJet T 45 through CUPS.
The test page from the admin on cups. How do I print my documents? I
really need to get this working tonight if anyway possible. Thanks in
advance.
___
So, sorry to post so early. For some reason the cups port didn't install
cups-lpr. Sorry everyone.
On Sat, 15 Nov 2003 00:43:44 -0600
Bryan Cassidy <[EMAIL PROTECTED]> wrote:
> I really need to get printing working on FreeBSD 4.9. Let me say that
> again. I got FreeBSD to
'm wrong but I think you have to generate
> your key AS the user you want to use it under. Looks like maybe you
> created a gpg key for ROOT, not Bryan Cassidy.
>
> gpg --list-keys
>
> ...should help clarify/confirm this.
>
>
>
>
> On Fri, 14 Nov 2003 18:4
Kinda new to this. Had to remove the ~/.gnupg dir and re-run gpg
--gen-key as 'user' and it works fine now as you can see. Thanks for the
response though. I appreciate it.
On Sat, 15 Nov 2003 09:04:37 -0600
Bryan Cassidy <[EMAIL PROTECTED]> wrote:
> This is what I get when I
Have you read the Handbook on printing? Might wanna check this out for
installing cups
http://www.freebsdforums.com/forums/showthread.php?s=&threadid=15325
HTHs
On Sat, 15 Nov 2003 21:03:34 -0500
Barry Skidmore <[EMAIL PROTECTED]> wrote:
> I am using FreeBSD-4.9-RELEASE on an i386 machine with
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
uname -mrs
FreeBSD 4.9-RELEASE i386
using mplayer when this happens
Nov 17 07:48:23 bellsouth /kernel: acd0: REPORT_KEY - ILLEGAL REQUEST
asc=0x6f ascq=0x04 error=0x04
Nov 17 07:48:23 bellsouth /kernel: acd0: REPORT_KEY - ILLEGAL REQUEST
asc=0x2c
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I suck when it comes to hardware. I know so little about hardware. My
dad said he is gonna get me about $400.00 worth of computer parts for
Christmas/Birthday sence they are so close so I can start building a new
custom PC. I have already picked out th
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Oh no. I must have explained myself wrong. $400.00 is just for starters.
I know for a fact I'm gonna buy that case so that leaves me with say
$300.00 to be on the safe side. Besides the case I would like the
motherboard to be the first actual piece of
I got these when doing a 'make install clean' in kde3 myself but the
port installed. is the install stoping or are you just seeing these
messages and the install is still going? If it stops the install then
give us the actual error message. I'm sure this isn't a error. If so,
then my install with i
DVD-Rom/CD-Rom
PIONEER DVR-106BK DVD-Recordable (Black Bezel) DVD-R DVD-RW DVD+R
DVD+RW
Put all this in a Antec PLUS1080AMG Chassis
On Tue, 18 Nov 2003 17:58:23 -0800 (PST)
Dan Strick <[EMAIL PROTECTED]> wrote:
> On Mon, 17 Nov 2003, Bryan Cassidy wrote:
> >>
> > I suc
I've never used sysinstall for anything but installing the operating
system. I'm sure what you want is cvsup. Use the
/usr/share/examples/cvsup/standard-supfile for updating source then
follow instructions in handbook on make world to update the system.
On Tue, 18 Nov 2003 21:09:03 -0800
"Kevin Mc
I don't know anything about using sysinstall for security
patches/upgrades etc. WHat your looking for I think is cvsup. Please
read the handbook on Using CVSUP to get the latests source updates,
security patches for your release and even updating to a different
RELEASE or -CURRENT or -STABLE.
On W
I don't know anything about using sysinstall for security
patches/upgrades etc. WHat your looking for I think is cvsup. Please
read the handbook on Using CVSUP to get the latests source updates,
security patches for your release and even updating to a different
RELEASE or -CURRENT or -STABLE.
On W
. you may need. Using the ports is just a personal reference.
I do recommend it though. Plesae check out this for further reading on
cvsup
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html
On Wed, 19 Nov 2003 23:08:06 -0800
"Kevin McKay" <[EMAIL PROTECTED]> w
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Here's the current setup that I have came up with. I think I would be pretty happy
with it as long as I don't have any problems in FreeBSD. If I have problems I want
them to beable to be fixed ya know?
Antec PLUSVIEW1000AMG Chassis
AMD Tyan S2466 (
Just a quick question. Bellsouth FastAccess DSL (not
lite) is my ISP. I use my [EMAIL PROTECTED] for
pretty much all my e-mails. It used POP3 to recieve
mail. Is this correct? Kinda new to POP,POP3, IMAP,
SMTP etc. I think the protocol for sending is SMTP.
Can I use SquirrelMail + Procmail to send/
iano Stucchi <[EMAIL PROTECTED]> wrote:
> On Tue, 25 Nov 2003 06:44:12 -0800 (PST)
> bryan cassidy <[EMAIL PROTECTED]> wrote:
>
> > Just a quick question. Bellsouth FastAccess DSL (not
> > lite) is my ISP. I use my [EMAIL PROTECTED] for
> > pretty much all my e-
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I'm sorry. Not Procmail I meant Postfix. Sorry about that
On Tue, 25 Nov 2003 16:07:12 +0100
Massimiliano Stucchi <[EMAIL PROTECTED]> wrote:
> On Tue, 25 Nov 2003 06:44:12 -0800 (PST)
> bryan cassidy <[EMAIL PROTECTED]> wro
t any whitespaces bsdjunky.homeunix.org or something else?
Thanks,
Bryan
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.3 (FreeBSD)
iD8DBQE/w/jL3TDgpNGRSLARAhtSAJ0cPwzWA+vVNKJaeCAF0B+B0+xTXACgwFC2
dZI7IPZ01EuGONY/kqOp+dI=
=H4Wk
-END PGP SIGN
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Why not just use the ports? Works fine on my end with FreeBSD
4.8-RELEASE
On Tue, 25 Nov 2003 22:06:27 +
David Gerard <[EMAIL PROTECTED]> wrote:
> We're trying to install gaim on a 4.8-RELEASE box, and it's
> acting like the package is broken.
>
hitexample cvsup5.FreeBSD.org.
> save changes and exit file(s)
> cvsup -g -L 2 ports-supfile
> cvsup -g -L 2 standard-supfile
>
> Just a few of my thoughts. Good luck.
> Pat
>
> On Wed, 2003-11-26 at 03:04, David Gerard wrote:
>
> > On 11/26/03 01:52, Bryan
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Might want to check the handbook on printing and read this how-to on
setting up CUPS
http://www.freebsdforums.com/forums/showthread.php?s=&threadid=15325
On Fri, 28 Nov 2003 20:46:07 -0800
"Alex Wu" <[EMAIL PROTECTED]> wrote:
> Hi, I am fairly new t
Trying to install www/phpbb. I get a Checksum mismatch error for
phpBB-2.0.6.tar.bz2. Don't know how to fix Checumsum mismatch
errors. Thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, se
If I try to start mozilla 1.5 with 'mozilla' and I select the profile
which is default for now and click Start Mozilla I get the following
error
Component returned failure code: 0x80004005 (NS_ERROR_FAILURE)
[nslProfileInternal.currentProfile]
I checked the file permissions on mozilla and they we
bsdsys:bsdsys default/ without any luck though.
On Sat, 29 Nov 2003 22:23:36 -0500
Joe Marcus Clarke <[EMAIL PROTECTED]> wrote:
> On Sat, 2003-11-29 at 23:24, Bryan Cassidy wrote:
> > If I try to start mozilla 1.5 with 'mozilla' and I select the
> > profile which is
I've downloaded a couple of .xhtml files and they have ^M characters
all through it. I tried the col -b < name > newname command on these
files but when I do that it erases the whole document. Any ideas?
___
[EMAIL PROTECTED] mailing list
http://lists.fre
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Sorry about sending you a e-mail directly. The tr -d '/r' < name >
newname worked perfect. Thanks.
On Sun, 30 Nov 2003 19:17:46 -0700
Robin Schoonover <[EMAIL PROTECTED]> wrote:
> On Sun, 30 Nov 2003 21:16:02 -0600, Bryan Ca
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Well, I take that back. It worked on 1 file and then ir started erasing
the contents of the file.
On Sun, 30 Nov 2003 21:29:13 -0600
Bryan Cassidy <[EMAIL PROTECTED]> wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> S
s.
On Mon, 1 Dec 2003 03:53:00 +0100
Melvyn Sopacua <[EMAIL PROTECTED]> wrote:
> On Monday 01 December 2003 04:39, Bryan Cassidy wrote:
>
> > Well, I take that back. It worked on 1 file and then ir started
> > erasing the contents of the file.
> >
> > On Sun, 30
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Gaim running perfect on FreeBSD 4.8-RELEASE p14
On 01 Dec 2003 11:33:19 -0500
Lowell Gilbert <[EMAIL PROTECTED]> wrote:
> David Gerard <[EMAIL PROTECTED]> writes:
>
> > Gaim requires perl 5.8 or higher just to be installed - its 'l33t++
> > custom c
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
What about formating the zip drive? Is there anything in the ports for
for formating a zip drive?
On Tue, 2 Dec 2003 08:13:06 +1100
"DG" <[EMAIL PROTECTED]> wrote:
> Greetings,
>
> I have a 5.1-RELEASE installation with an IDE Zip drive (amongst ot
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Of course you need apache installed. It will print out on the screen after you get
done with a make install clean on ddclient but after you copy the appropriate files
just edit /usr/local/etc/ddclient.conf Here I have attached my ddclient.conf file
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello everyone. Hows everyone doing tongith/today? Well, I'm taking a
week off of work and thought I would read up on Security/Networking and
anything else to do with making my system/webserver secure. I am going
to Best Buy (ya i know, but it's the on
DSL cable.
Plus what into what? Kinda confused here. I run these services on my
box. Thanks for the help.
Bryan
CUPS
Apache
PHP
COURIER-IMAP
POSTFIX
SquirrelMail
On Thu, 04 Dec 2003 03:15:38 -0500
Scott W <[EMAIL PROTECTED]> wrote:
> Bryan Cassidy wrote:
>
> >-BEGIN PGP
OK. The PC I am using now is the one I like to do all my work
on but want to get a router. I was told to find a older PC and
set it up as a router. Well, I have the extra PC now and I
just need to set it up. My main PC runs apache webserver, php,
squirrelmail, courier-imap, cups and a few other thi
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
How does one go about configuring and using a usb wecam? I want to take
a couple of pictures but not sure how to go about doing this. Here is
the output from dmesg for my webcam
ugen0: Logitech Camera, rev 1.00/1.00, addr 3
Thanks
-BEGIN PGP SIGN
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello. I'm using FreeBSD 4.8 p14 and have a USB Web Cam that I would
like to use. I have the following in my /etc/rc.conf file
usbd_load="YES"
and the following in /boot/loader.conf
usb_load="YES"
ums_load="YES"
umass_load="YES"
Not sure if these
Hello. I'm using FreeBSD 4.8 with my Logitech QuickCam (I think
it's a quick cam, kinda old.) Here is the output from dmesg |
grep ugen
ugen0: Logitech Camera, rev 1.00/1.00, addr 2
I would really like to get my camera configured and whatever
else needs to get done so I can take some pictures wit
I have just started using Mutt again. I would rather use Mutt
(Bif I can just setup my filters like I have in Sylpheed. I don't
(Bknow if this is what Procmail filtering is suppose to do but
(Bthis is what I want and I am very confused about setting up
(Bmail filters in Mutt. Have no clue where
OK. I've added that to my .procmailrc but when I load Mutt it
(Bstill doesn't show any group called freebsd-questions. Do I
(Bhave to create a ~/Maildir/freebds-questions directory? I am
(Busing Postfix + Courier-IMAP + SquirrelMail + Procmail so I'm
(Busing Maildir.
(B
(B
(BOn Thu, Dec 18,
Hello. Fresh install of FreeBSD 4.8. I also installed
mutt-devel + fetchmail. I setup a simple .fetchmailrc
file with
poll mail.isp.net
proto pop3
username "usrname"
password "passwd"
and when I first opened Mutt it asked if I wanted to
created ~/Mail and I said yes. When I run 'fetchmail'
I don'
I am using FreeBSD 4.8 with Mutt 1.5 and Procmail 3.22 and have setup
some filters. In my .procmailrc I have the following
:0: * [EMAIL PROTECTED] FreeBSD_Questions :0: * ^TO_questions
FreeBSD_Questions
:0: * .* Default
And in my .muttrc file I have the following
subscribe freebsd-questions su
Is there anyway when viewing your folders inside of Mutt to view the
amount of e-mails instead of the size of the total e-mails?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail t
Here is a little about my setup
uname -a
FreeBSD mail.comcast.net 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1
08:49:13 UTC 2009 r...@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
i386
Mutt 1.4.2.3i
Output from df -h
Filesystem SizeUsed Avail Capacity Mounted on
/dev/
>
> > Erik
> >
> > On Sat, Sep 19, 2009 at 09:16:36PM -0500, Bryan Cassidy wrote:
> > > Here is a little about my setup
> > >
> > > uname -a
> > > FreeBSD mail.comcast.net 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1
> > > 08:49:1
Hi, I am in the process of building a new PC and I am building this
machine (one of three... second will be OpenBSD Firewall for FreeBSD and a
third one for Windows.. you know games and all that stuff) and I am wondering
if I will have any problems with this motherboard amd its chipset. North Brid
Anyone have this all-in-one functioning correctly under FreeBSD?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
I am currently using FreebSD 7.2 and I have just installed and configured
Fedora 11 on an external
hard drive so I can do some printing and other things. I was wondering how can
I get full access
to the Desktop (GUI) on FreeBSD for Fedora 11 on my external hard drive? Any
ideas?
___
successfully
>
> So, no joy on this yet.
>
> This is FreeBSD 8.2.
>
Hi,
Those errors will be fixed in the next release, out in the next day or so.
Still testing it.
If you want to help test, it's out on vermaden's github right now.
An updated port will be availabl
On Wed, Mar 9, 2011 at 11:21 AM, wrote:
>
> My wife will turn into a pillar of salt if she looks at my Web logs? :)
>
> So this is normal behavior?
>
> The latest entry is:
>
> 188.134.62.20 - - [09/Mar/2011:12:15:04 -0500] "GET
> http://images.google.com/ HTTP/1.1" 200 13134 "-" "-"
>
> T
On Thu, Apr 7, 2011 at 9:41 AM, Odhiambo Washington wrote:
> On Thu, Apr 7, 2011 at 17:32, Carmel wrote:
>
>> On Thu, 7 Apr 2011 17:00:43 +0300
>> Odhiambo Washington articulated:
>>
>> > On Thu, Apr 7, 2011 at 15:54, Carmel wrote:
>> >
>> > > I was wondering if anyone here has had any experien
On Thu, Apr 7, 2011 at 5:43 PM, Chuck Swiger wrote:
> On Apr 7, 2011, at 3:19 PM, Bryan H. wrote:
>> If you're just looking for a new router, I would highly recommend the
>> Linksys WRT160NL. I got mine refurbished from Cisco's store[1], and
>> flashed it with
Fax: 301-217-9277
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscr...@freebsd.org"
--
Regards,
Bryan Drewery
bdrewery@freenode/EFNet
signature.asc
Description: OpenPGP digital signature
t;
> Thanks
>
> /Leslie
It seems consistent with how the other feature modes are documented.
(I'm not the original author on portmaster). Personally the manpage
really confuses me. There's been bigger issues to tackle first though so
I have not touched the manpage much.
--
Reg
DATEN/poudriere/basefs/data/build/91amd64-hostportstree/ref/poudriere/deps/libiconv-1.14_1
> /mnt/system/DATEN/poudriere/basefs/data/build/91amd64-hostportstree/ref/poudriere/deps/libiconv-1.14_1/pkg-1.1.4_1
> >> Cleaning up
> >> Umounting file systems
>
>
>
> could someone help me?
>
> thanks in advance
>
> Wolfgang
>
> ___
> freebsd-po...@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-ports
> To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
>
--
Regards,
Bryan Drewery
signature.asc
Description: OpenPGP digital signature
i 2013, 08:48:38 schrieb Bryan Drewery:
>> On 7/23/2013 8:36 AM, Wolfgang Riegler wrote:
>>> Hi,
>>>
>>> I having trouble using poudriere since updating it to 3.0.4 on FreeBSD
>>> 9.1-p4. Trying poudriere-devel throws the same error. Here is the complete
&g
the complete "texlive" package,
> so I am not sure why it is suddenly have problems.
>
I've just updated ports-mgmt/portupgrade-devel with a fix. Please give
it a try and let me know. Version 20130916,3.
--
Regards,
Bryan Drewery
signature.asc
Description: OpenPGP digital signature
e tree would I be required to keep up to date
for my minimal installation?
I realized in testing on an older system that portupgrade will only install
ports I am using but don't know if make installworld will do the same.
---
Bryan
bc3910 'at' gmail 'dot' com
__
d I be required to keep up to date
for my minimal installation?
I realized in testing on an older system that portupgrade will only install
ports I am using but don't know if make installworld will do the same.
---
Bryan
bc3910 'at' gmail 'dot&#x
know what causes these errors either.
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
Any ideas / suggsted reading somewhere on this?
Thank You.
---
Bryan
bc3910 'at' gmail 'dot' com
_
My apologies if this is a repost. It seems either I
had a gmail problem or list never posted the question.
I have subscribed with another address to monitor
problem.
Anyway, here is my quesion again.
I get the following errors from dmesg on one of my ide
drives on boot.
Other similar drives dont
--- Lowell Gilbert
<[EMAIL PROTECTED]> wrote:
> Bryan Curl <[EMAIL PROTECTED]> writes:
>
> > My apologies if this is a repost. It seems either
> I
> > had a gmail problem or list never posted the
> question.
> > I have subscribed with another addre
What is the cvsup tag for geting 6.1-PRERELEASE src?
I think it should be tag=RELENG_6_1 .
Can I use src-all for this revision to upgrade from where I am now?
Right now I am: ... 6.0-RELEASE-p6 #0: Tue Apr 4 09:43:53 MDT 2006
...
--
--
Bryan
bc3910 'at' gmail
What is the cvsup tag for getting 6.1-PRERELEASE src?
I think it should be tag=RELENG_6_1 .
Can I use src-all for this revision to upgrade from where I am now?
Right now I am: ... 6.0-RELEASE-p6 #0: Tue Apr 4 09:43:53 MDT
2006 ...
--
Bryan
[EMAIL PROTECTED
Daniel Bye wrote:
On Tue, Apr 11, 2006 at 06:19:40PM -0600, Bryan Curl wrote:
Thanks Dan,
I appreciate you answering me so soon.
My upgrade from RELENG_6_0 went without a hitch.
So I'm off to makeworld land. Hopefully I'll be back in few days.
Looks like I have slave hard drive
. Am busily cvsupping to RELENG_6_1
now.
Dan
I poked around the FreeBSD web site and can't seem to find where you
guys are getting the latest release information.
I know if it was a snakeyip
--
Bryan Curl
b3910 'at' p
Ted Mittelstaedt wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bryan Curl
Sent: Wednesday, April 12, 2006 11:27 AM
To: freebsd-questions@freebsd.org
Subject: Re: 6.1-PRERELEASE CVSUP tag=???
Daniel Bye wrote:
On Tue, Apr 11, 2006 at 09
Hugo Silva wrote:
Nikolas Britton wrote:
On 4/12/06, Bryan Curl <[EMAIL PROTECTED]> wrote:
Ted Mittelstaedt wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bryan Curl
Sent: Wednesday, April 12, 2006 11:27 AM
To: freebsd-questions@freeb
On 4/10/06, David J Brooks <[EMAIL PROTECTED]> wrote:
>
> On Monday 10 April 2006 09:26, Bryan Curl wrote:
> > --- Lowell Gilbert
> >
> > <[EMAIL PROTECTED]> wrote:
> > > Bryan Curl <[EMAIL PROTECTED]> writes:
> > > >
Running 4.10. I ran a 'make index' in /usr/ports just
now and i get the following error
Generating INDEX - please wait..tkscanfax-1.02:
"/usr/ports/japanese/tk80" non-existent -- dependency
list incomplete
===> comms/tkscanfax failed
*** Error code 1
1 error
Thanks
___
Hi there,
I've recently installed v5.3 and am completely new to FreeBSD.
I downloaded and a driver for my adsl modem and, following the
instructions which came with the software, compiled the program.
In order to run it I tried to run one of the supplied scripts and got
the following error:
bash-2.
k DSL-200 USB ADSL modem
which as usual only has drivers for Windows.
This seems to be the only way to get connected with this device.
Regards
Al
Chuck Swiger wrote:
Alistair Bryan wrote:
I downloaded and a driver for my adsl modem and, following the
instructions which came with the software, com
Hi there,
Try this site: http://eciadsl.flashtux.org/index.php?lang=en
There is a link to a *BSD driver on the download page.
If you get it to work please let me know how you did it as it hasn't
worked for me (yet)
Ali
rulf_vernold wrote:
Support FreeBSD 5.3 (USB) ADSL Modem D-Link DSL-200
S
Hi there,
Has anyone had any success using the above USB modem?
Regards
Al
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Below is an email I sent about this to the postfix-users list last
week, but there've been no replies so I'm forwarding it on to
freebsd-questions.
Thanks,
Bryan
-- Forwarded message ------
From: Bryan Fullerton <[EMAIL PROTECTED]>
Date: Wed, 5 Jan 2005 13:58:
n.cgi?query=dump
http://www.freebsd.org/cgi/man.cgi?query=restore
Bryan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Mon, 10 Jan 2005 20:47:44 -0800, Kris Kennaway <[EMAIL PROTECTED]> wrote:
> On Mon, Jan 10, 2005 at 10:47:24PM -0500, Bryan Fullerton wrote:
>
> > So... what could cause this? Is the sig 11 causing the failure, or is
> > master killing off smtp as a result of some
roc HTT-capable machine
and SATA with either SMP or non-SMP kernels, so I'll try turning off
HTT in the BIOS later this week and see if that helps.
Bryan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freeb
On Tue, 11 Jan 2005 22:54:29 -0500, Brian Drulard
<[EMAIL PROTECTED]> wrote:
> returned "error can't find kernel source tree"
Sounds like there's no kernel source in /usr/src/sys on your machine.
Section 8.3 of the Handbook has details o
On Wed, 12 Jan 2005 18:29:01 +1300, Jonathan Chen <[EMAIL PROTECTED]> wrote:
> On Wed, Jan 12, 2005 at 12:02:37AM -0500, Bryan Fullerton wrote:
> > By default the system will detect a HTT processor, but can only launch
> > the second 'virtual' CPU core if you re
On Wed, 12 Jan 2005 00:02:37 -0500, Bryan Fullerton <[EMAIL PROTECTED]> wrote:
> I'm experiencing some strangeness with a uniproc HTT-capable machine
> and SATA with either SMP or non-SMP kernels, so I'll try turning off
> HTT in the BIOS later this week and see if t
ng things. Your top output looks
fairly normal for a machine that's freshly rebooted and/or not
terribly busy.
Bryan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
,
> imap, or squirrelmail
Squirrelmail is just a web-based IMAP client.
> What have I done wrong, or where should I (re)start?
Anything in maillog or messages logs?
Bryan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailma
bundle fine,
> but the when I try to install XML::DOM, or Text::Aspell, they fail.
What are the errors when they fail?
Bryan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubsc
L-DOM && make install clean
>
> Understood. But I am having a hard time figuring out how Perl modules
> "should" get installed on a system.
The generally preferred way on a FreeBSD system is to use the FreeBSD
ports as noted above.
http://www.freebsd.or
7;s not part of the shell startup?
> Another question is I also try to make it off through the way adding
> update_motd="NO" to the file /etc/rc.conf. But it doesn't work!
This just toggles updates or the kernel version in /etc/motd by the
script /etc/rc.d/motd, it has nothing to
Google result on "perl cpan shell test fail")
Bryan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
1 - 100 of 322 matches
Mail list logo
