Hi.
I've not been on my Linux system with Gimp for a bit so Ideally I need
to work through exactly how I set that up and how I'm using it. The
aconnectgui is how to see and make the connections but in actual fact
it's best to do that from command. The connection isn't remembered so
rather than
On Thu, Sep 13, 2012 at 2:25 PM, Ryan Stark wrote:
I've not been on my Linux system with Gimp for a bit so Ideally I need
to work through exactly how I set that up and how I'm using it. The
aconnectgui is how to see and make the connections but in actual fact
it's best to do that from
On Thu, Sep 13, 2012 at 2:46 PM, Ryan Stark wrote:
Yes, you could connect through Jack but Hardware will show up at ALSA
so I don't think Jack would actually be a benefit for Gimp use but
maybe you'd need this to test with software?
Um, that was more like a joke :)
I think it's entirely
You can do anything. That's why it's so great. MIDI has continuous
controllers and notes. Notes can be mapped as well. Continuous
controllers can be set to any value or a button sends that value so
say you want a collection of brush sizes, you set a button to send a
value anywhere from 0-127 that
You need to set up the Korg using Windows software to get it all
exactly as you want. That should work in wine. Gimp will remember all
the mappings but the one problem is that Gimp doesn't remember the
connection so you have to connect the ALSA output of the MIDI
controller to Gimp's input after
So can you use MIDI in Windows as well? I've never tried that. I'm
always assuming Gimp users are Linux but of course that isn't the
case. I'm sure I've read there is a problem with it on OSX though. I
don't like Gimp OSX. Often there are problems. I stopped using it on
OSX.
On 13 September 2012
On 13 September 2012 07:25, Ryan Stark efflux...@googlemail.com wrote:
One problem with Gimp 2.8 is that the
top size of the brush is far too big. If you compile from scratch you
can change that. This needs to be mentioned in the Gimp developer
list. It's also possible to have UI to set that
On 13 September 2012 08:26, Ryan Stark efflux...@googlemail.com wrote:
Yes, exactly, that is the problem. You can change the default brush
largest size before compiling. Presently it's too large and this needs
discussed with developers. I found somewhere how to change that code
and it's very
I can't even remember the brush size. I'm not looking at Gimp as
present, It's just WAY too large in Gimp 2.8. 2.6 was fine. I've not
used 2.6 for years so I can't remember everything about it as far as
this logarithmic stuff etc is concerned. I'm not even looking at 2.8.
I'm on a Mac. Gimp is on
On Thu, Sep 13, 2012 at 3:16 PM, Ryan Stark wrote:
So can you use MIDI in Windows as well?
Um, actually, now that I think about it again, I could be wrong.
Alexandre Prokoudine
http://libregraphicsworld.org
___
gimp-user-list mailing list
OK. I'm not looking at Gimp at the moment. I have no source code to
compile but before compiling, as far as I can see there is a file
called gimppaintoptions.c. In that there are the lines:
GIMP_CONFIG_INSTALL_PROP_DOUBLE (object_class, PROP_BRUSH_SIZE
Date: Thu, 13 Sep 2012 10:26:58 +0200
From: mader...@gmail.com
To: gimp-user-list@gnome.org
Subject: Re: [Gimp-user] Print shops file formats
On 09/13/2012 04:32 AM, Steve Kinney wrote
On 09/12/2012 09:50 AM, jfrazie...@nc.rr.com wrote:
[...] Ask how many print shops support psd
On Thu, Sep 13, 2012 at 6:32 AM, Steve Kinney wrote:
Over five years I saw a steady trend among the stream of print
vendors who crossed my path: The Photoshop or else paradigm went
from being fairly common to being very rare. Maybe the imploding
U.S. economy drove vendors who were unable to
Hello,
I have a question which hopefully has a nice answer. :-) Sometimes I
would close by mistake a tool dock by clicking alt-F4 a little too
fast, while the dock has the focus, but I thought it was the image
(and I wanted to close this image). Then the dock configuration (which
tools were set
On Thu, 2012-09-13 at 08:47 -0300, Joao S. O. Bueno wrote:
[...]
What do you think would be a reasonable largest size multiplier
(as opposed to actual brush size)? The current value is 1000.0 -
in the previous version it was 10.0.
I used to patch GIMP to set the max _size) 1000 because the
On Fri, 2012-09-14 at 02:08 +0900, Jehan Pagès wrote:
Hello,
I have a question which hopefully has a nice answer. :-) Sometimes I
would close by mistake a tool dock
Look in the Windows menu for Recently closed docks.
Liam
--
Liam Quin - XML Activity Lead, W3C,
On Thu, Sep 13, 2012 at 9:08 PM, Jehan Pagès wrote:
I tried to search but could not find a solution to this: would there
be an option right now to prevent the tool docks from closing by the
usual window-close event (so you could close them by the dock menu
explicitely, but not by quick
On 09/13/2012 04:26 AM, maderios wrote:
On 09/13/2012 04:32 AM, Steve Kinney wrote
On 09/12/2012 09:50 AM, jfrazie...@nc.rr.com wrote:
[...] Ask how many print shops support psd files but not xcf?
Hi
This is not THE problem. They accept all other formats, png, tiff, etc
I
would bet that
Hello everybody!
I'm having some problems with a python command. I'm working on an image
that is 640x640. I'm trying to do a horizontal flip of a layer with this
command:
pdb.gimp_item_transform_flip(layer, 320, 0, 320, 1)
the flip succeeds, but it generates a distortion on the flipped
Origineel bericht
Onderwerp: Read-0nly since upgrade to 12.2 (and so GIMP 2.8.0)
Datum: Thu, 13 Sep 2012 20:47:19 +0200
Van:A. den Oudsten adenouds...@wxs.nl
Aan: Gimp Usergroup gimp-u...@lists.xcf.berkeley.edu, openSUSE
Usergroup opens...@opensuse.org
In Gimp
On Thu, Sep 13, 2012 at 11:36 PM, A. den Oudsten wrote:
In Gimp 2.8.0, when exporting a file I get the message: Can't write to
file, read only.
In Dophin the user Andrdo can read and write.
How do I solve this?
What is Dophin, what is the operating system and where is this file located?
Op 13-09-12 22:00, Alexandre Prokoudine schreef:
On Thu, Sep 13, 2012 at 11:36 PM, A. den Oudsten wrote:
In Gimp 2.8.0, when exporting a file I get the message: Can't write to
file, read only.
In Dophin the user Andrdo can read and write.
How do I solve this?
What is Dophin, what is the
Dear developers:
Can we have a new option Do not confirm closing if unsaved image was
exported/overwrited ?
(Edit Preference Evironment Saving Images Do not confirm closing if
unsaved image was exported/overwrited )
I think this would be helpful when dealing non-xcf files, after
On Fri, 2012-09-14 at 00:34 +, minhsien0330 wrote:
Dear developers:
Can we have a new option Do not confirm closing if unsaved image was
exported/overwrited ?
It would defeat the purpose of moving Save to Export - that of avoiding
accidental work loss.
I would like to be told exactly
Hi,
On Fri, Sep 14, 2012 at 2:13 AM, Liam R E Quin l...@w3.org wrote:
On Fri, 2012-09-14 at 02:08 +0900, Jehan Pagès wrote:
Hello,
I have a question which hopefully has a nice answer. :-) Sometimes I
would close by mistake a tool dock
Look in the Windows menu for Recently closed docks.
On Fri, Sep 14, 2012 at 6:39 AM, Jehan Pagès wrote:
Thanks, but I had seen this option and tested it before. This option
only prevents a tab from being dragged out of a dock by the mouse by
accident. It does not prevent the whole dock from being closed.
OK, I see what you mean. Is there no
So I have an odd issue. What I am trying to do is to add the logo of the gym
that turned my life around to my Gmail signature, and make the logo a link to
their site. I'm fairly experienced with digital graphic art concepts, I've
been a GIMP'er for years, yet this one has me stumped. So if
On 09/13/2012 11:53 PM, FortKnox wrote:
So I have an odd issue. What I am trying to do is to add the logo of the gym
that turned my life around to my Gmail signature, and make the logo a link to
their site. I'm fairly experienced with digital graphic art concepts, I've
been a GIMP'er for
28 matches
Mail list logo
