at any one else's jobs, but if you
look
at the source (job stream) of my samples near the top, there is a section
that describes all the various steps and what they do. I'm sure the other
methods are similar (even though there might be multiple jobs).
Mark
--
Mark Zelden - Zelden Consulting
Besides that issue, the refback should ALWAYS be to the previous step,
not the first step.If it ever goes to a 2nd volume you will get an
abend. Gee... it's been so long that I've dealt with anyone doing
that I can't remember, but I think it's an A13 abend.
Mark
--
Mark Zelden - Zelden
from the EDL when it
know the
tape is one of its own, but I'm not sure if that is before or after SMS gets
involved.
Either way, STORCLAS=DUPT@SMS should let you get at the STK tape in the ACS.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m
On Tue, 29 May 2012 21:46:44 +0200, R.S. r.skoru...@bremultibank.com.pl wrote:
(re-send)
W dniu 2012-05-29 17:47, Mark Zelden pisze:
On Tue, 29 May 2012 16:27:00 +0200, R.S.r.skoru...@snip.com.pl wrote:
For STC and TSU there is explicit parameter for OUTCLASS.
For JOBs there's
On Wed, 30 May 2012 09:21:26 -0500, Mark Zelden m...@mzelden.com wrote:
Also, if you follow IBM-MAIN (which I know you do), you should know
by now to never trust the JES2 parms for most settings since they
can be changed with an operator command and don't revert back
to the parm settings
with SUB=MSTR, you're SOL until
you IPL if you run into strange results. There is no refresh trick.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
to submit to the INTRDR via SYSOUT=(n,INTRDR), the default MSGCLASS
would be n.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
regardless of
how
many logical / split screens you have active.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert
have them these days since you can start as many emulation
sessions as you want, but I think most production shops - especially the
medium to large size ones - still use them.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
chuckle Nice Friday line.
To answer the OP: Other than a CLIST / REXX exec issuing the PROFILE PREFIX
command, I
don't think so. Unless you are using SYS1.UADS still and then someone could
potentially
edit the UADS member for that userid and modify it.
Mark
--
Mark Zelden - Zelden
On Fri, 25 May 2012 19:01:13 -0400, Shmuel Metz (Seymour J.)
shmuel+ibm-m...@patriot.net wrote:
In 8947834608329895.wa.markmzelden@bama.ua.edu, on 05/25/2012
at 10:04 AM, Mark Zelden m...@mzelden.com said:
This part wasn't answered. You need to use the field mark key
(x'1E').
Does
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
open a PMR.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
in the sample LPA member (2 + 1 alias) are documented as XPLINK
in appendix 1.3.2. CRTEC128 and alias C128 are not mentioned
at all in that section.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS
comment field. There is a product from
Innovation
called IAM (you've probably heard of it) that uses (or at least can use) that
field
as a way to identify IAM files when the define is run - OWNER($IAM). At least
that
was the way it worked when I used it 25 years ago.
Mark
--
Mark Zelden - Zelden
statement and show SYS in the
D SMF,O output.
Does that match what you are seeing?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems
Yes. My description would have been better if I had written took those
values from
the SYS statement instead of took their defaults from the SYS statement.
BTW, I'd
like to know when SYSIN applies too. Time for an RCF / manual update.
Mark
--
Mark Zelden - Zelden Consulting Services - z
to as a production sysplex (really,
these were both monoplex LPARs, but the steps are the same).
If you can't find it let me know and I'll see if I can dig it up.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
via Tn3270 (2074,
OSA-ICC and I assume Visira which I've never worked with) any messages
that come out on the console along with the wait disappear immediately
due to the RESET that happens along with the wait.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m
to be able to get to the
syslog data from another LPAR via operlog.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming
On Wed, 16 May 2012 11:14:36 +0200, R.S. r.skoru...@bremultibank.com.pl wrote:
W dniu 2012-05-15 20:33, Mark Zelden pisze:
What's wrong???
User error? :-)Did you change the SYSID or anything like that?
When you use the LOG command do you see an ISPF short message
error?
Try SYSID
. That is true for z/OS also.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
SYSID. Do so and I assume
your problem will be fixed.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert
could add them to MSTRJCLxx also. Are you using
a DSNT with sysplex mode enabled? You should change that for your onepak
or ZAP it (see the ONEPAKZ* / TWOPAKZ* examples on my web site).
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
CONSOLxx member have a syntax problem? Does it
contain HARDCOPY DEVNUM(SYSLOG)? If you have
OPERLOG enabled, does that work?
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http
On Tue, 15 May 2012 11:45:28 -0500, Williamson, James R
james.r.william...@uscg.mil wrote:
Do you have the HLQ.HASPINDX dataset that SDSF needs to access SYSLOG?
hlq.HASPINDX is no longer used / required as of z/OS 1.11.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
On Tue, 15 May 2012 19:02:57 +0200, R.S. r.skoru...@bremultibank.com.pl wrote:
Don't know why it broke, but have you tried this?
V SYSLOG,HARDCPY
Yes, no effect
Try W START (WRITELOG START)
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m
)
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
. That was a suggestion for the onepak system only as a
debugging technique / test. I assume the onepak's parmlib could be
edited / changed from a working system.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS
proc. Are you
talking about ICHRDSNT (database name table) when you say DSNT?
Yes, ichrDSNT. So your onepack system was working and you went through a
system upgrade for that system? Didn't you have to rebuild it using your
z/OS 1.13 sysres created from Serverpac?
Mark
--
Mark Zelden
(user
error).
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
On Tue, 15 May 2012 20:20:28 +0200, R.S. r.skoru...@bremultibank.com.pl wrote:
W dniu 2012-05-15 19:25, Mark Zelden pisze:
On Tue, 15 May 2012 19:02:57 +0200, R.S.r.skoru...@.com.pl wrote:
Don't know why it broke, but have you tried this?
V SYSLOG,HARDCPY
Yes, no effect
Try W
On Tue, 15 May 2012 20:23:39 +0200, Miklos Szigetvari
miklos.szigetv...@isis-papyrus.com wrote:
Hi
Is it possible to find the actual EXCP count value in the address spac ?
Same answer as the other day in a different thread... SMF 30 records.
--
Mark Zelden - Zelden Consulting Services - z/OS
to OPERLOG from a past use or from the parms.
I always forget about that because I've had an exit in place since OS/390 1.2
that
forces SYSLOG as the default unless you explicitly use LOG O.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
.@0AA
Oops. I forgot to mention the newer 8-byte IOSX field. Thanks, Rob!
And I assumed the OP wanted data after the fact. Thanks to both of you.
Although the actual requirement (live vs. after the job runs) still
isn't clear.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS
On Tue, 15 May 2012 13:41:11 -0500, Mark Zelden m...@mzelden.com wrote:
On Tue, 15 May 2012 18:31:00 +, Jousma, David david.jou...@53.com wrote:
Try LOG S?Maybe your are defaulting to OPERLOG which you appear to have
turned off.
Right... didn't think about that. The IBM default
in
(not just IBM-MAIN).
Cheers,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
upgrading
to z196's, or have any thoughts on where I might look?
Thank you
Address space level CPU consumption (SMF 30s) - before and after.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS
as a complaint or new SHARE
requirement
or whatever the case may be, then what was your point in posting to IBM-MAIN to
solicit feedback to begin with?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
submitted / triggered from a CICS or MQ region that is really part
of an online transaction more than it is a batch job.You don't
want these sitting around in the input queue waiting for initiation
when the system as at or near 100%.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS
.
So now what? Do I have to put a user hold on UA64502 to make
sure it doesn't get applied in our normal maintenance procedures, or will it
get marked
PE via current HOLDDATA until something newer is available?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
better than test batch, which is discretionary. The
3rd period is discretionary. I forgot how long in wall clock time 20
was when I set this up (10-15 seconds on a system with avail. cycles),
but I figured anything longer than that was more like batch than interactive.
Regards,
Mark
--
Mark
numbers as to what you considered
clutter. I haven't seen any responses yet. See the last paragraph
of this post:
https://bama.ua.edu/cgi-bin/wa?A2=ind1205L=ibm-mainD=1O=DT=0P=140934
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
On Fri, 4 May 2012 14:45:21 -0700, Edward Jaffe edja...@phoenixsoftware.com
wrote:
On 5/4/2012 1:55 PM, Mark Zelden wrote:
Is there a way to not have it set up? I do remember an MVS system long ago
in a galaxy far far away where there was a JES2 exit that changed the
internal text from
you are using the correct addresses on each LPAR you are trying
to test with. Does a D U,,,cuua show them as online?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities
and
describes a message they see in their joblog that isn't in the syslog.
Depending on the job, the operations person may not even be able
to view the output in SDSF due to security restrictions.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m
and Websphere LPARs don't even run batch),
overall for the environment I would expect the average increase to
be more along the lines of .04%.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
much control'?
Because unless I misread Kevin's post, it didn't sound like syslog/operlog
was even an option. That is the part I'm complaining about.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
On Fri, 4 May 2012 08:42:37 -0700, Edward Jaffe edja...@phoenixsoftware.com
wrote:
On 5/3/2012 7:15 PM, Mark Zelden wrote:
If the new MPFLSTxx option has it disabled by default or enables the verbose
messages, what
purpose does the OCE_ABEND_DESCRIP=YES serve in DEVSUPxx? What if you want
where there was a JES2 exit that changed the
internal text from your JCL to have half track blocking for DASD. But
BLKSIZE=0 has worked since... well, for so long I don't even remember.
MVS/XA? Or was it DFSMS V1 with MVS/ESA or MVS/XA 2.2.3?
Mark
--
Mark Zelden - Zelden Consulting Services
).
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
On Tue, 1 May 2012 21:35:52 -0400, Robert A. Rosenberg hal9...@panix.com
wrote:
At 16:30 -0500 on 05/01/2012, Mark Zelden wrote about Re: Java PTF
Packaging Error Deletes the Java SDK With RC=0:
It's just extra work and space for managing a PTF that replaces the
entire product / unix file
with
non-prod (QA/TEST) has 3 periods, with the 2nd one being
very long and the 3rd being discretionary for some batch like
long running enclaves.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
objectives.I've never been at a shop that
said production batch can finish whenever the system gets around to it.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http
for sure I wasn't using SMP/E at later levels of 1.4. It's just
extra work
and space for managing a PTF that replaces the entire product / unix file
system contents with each apply. I don't need SMP/E to keep track of that
for me.
I guess I'm not a real sysprog. :-)
Mark
--
Mark Zelden
. Human nature I suppose, I often do it too. I just
depends on how annoying an annoying problem is. :-)
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com
it of course. Load addresses change often, but no one ever seems to type
those in wrong.
I really like the idea of the HMC being able to quickly open a reference to
the correct wait state code.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m
There are? I see only one:
quote
USS
See unformatted system service.
/quote
And this very recent APAR describes a problem with a zFS loop in
renaming processing after a BPX1REN ( rename, rename() ) syscall from
Unformatted System Service. No wonder it caused a loop! g,d, r
APAR
shops did it different ways
or just had too much junk in their SMPTABL lib that was never
cleaned up. It really doesn't matter for me these days because
I haven't done an interactive sysmod install in probably 15 years.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
has a DATACLAS(...) parm in it.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
the define would show
something,
but you aren't getting that far. You need to trace the SMS rules with write
statements
or IEEIBALL or ISV software. Do you have the output still of when this
was done in production to prove someone didn't specify DATACLAS(..)?
Mark
--
Mark Zelden - Zelden
125 STCUSR K LOCAL
Does a $DJOBCLASS(STC) display match the parms you cut/pasted above?
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
for a test
or in your normal startup procedure (automation, etc.). For example
START MYSTC,MSGCLASS=X
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
On Thu, 19 Apr 2012 09:55:10 -0500, Mark Zelden m...@mzelden.com wrote:
Does a $DJOBCLASS(STC) display match the parms you cut/pasted above?
Actually, since z/OS 1.11 (or z/OS 1.10?) you need the LONG operand added:
$DJOBCLASS(STC),LONG
Mark
--
Mark Zelden - Zelden Consulting Services - z
and if you want to make changes, always harden them
in the parms as well.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming
, *YOU MUST* change
DEVT() to DEVT(3390) (assuming you are not using something
like a P/390 with 3380 DASD) before submitting the IDCAMS job.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS
,rw=SYST|SYSX
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
On Tue, 17 Apr 2012 12:35:19 -0500, Paul Gilmartin paulgboul...@aim.com wrote:
On Tue, 17 Apr 2012 10:59:59 -0500, Mark Zelden wrote:
I ran an exec similar to this from TSO to mount the PDSE on the local system:
/* rexx */
Address TSO
MOUNT FILESYSTEM(NFS_ZELD) TYPE(NFS) ,
MOUNTPOINT('/u
1.13 system?
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
and about 1PB of storage per DLm.
At least this is how it is typically done. I have heard of some variations.
It's actually pretty slick. I love working in a tapeless environment these
days. No more waiting for HSM ML2 recalls, report archive recalls, etc.
Mark
--
Mark Zelden - Zelden
fast the internet is... it's still quicker to do this locally.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert
librarian to download / manage PDF bookshelves (per my last post
- for example, Tivoli since
bookmanager format is not available).
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http
the exit to force MEMLIMIT=NOLIMIT for STCs with
REGION=0M (which was the behavior prior to OA14391).
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com
completes.
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
everywhere
else, so for now I'm leaving it on and hopefully I'll get used to it
more with less mistakes.
It helps if you always run with SET DISPLAY ON. Then at least when you
turn on sorting (accidentally or not) you can see it is on.
See what's new under HELP for more info.
Mark
--
Mark Zelden
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
like this added:
otelnet nnn/tcp OMVS(nnn is the port - usually n23
or nn23)
The PORT statement in TCPIP profile has it reserved as well:
nnn TCP OMVS; OE TELNET SERVER
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS
NOBUFF: 0
SEND CNT: 19 BUFFLEN (FIT): 8124
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems
Authorized
by the system.
When the system is IPLed with GRS=NONE? I thought RNL processing was
skipped in that case.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities
classes on these
monoplex LPARs either!
How hard is it to check for PLEXCFG=MONOPLEX
There, now I feel better. :-)
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http
On Fri, 30 Mar 2012 08:36:50 -0500, Elardus Engelbrecht
elardus.engelbre...@sita.co.za wrote:
Mark Zelden wrote:
Rant of the day...
Rant of the month? :-D
but why do I have to go and delete GRS and XCF health checks on my monoplex
LPARs??? Sure I can add AUTHQLVL(2) to GRSCNF00, but I pick
tune for those 2%?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com
On Fri, 30 Mar 2012 10:28:23 -0500, Mark Zelden m...@mzelden.com wrote:
On Fri, 30 Mar 2012 10:24:54 -0400, Mark Brooks mabr...@us.ibm.com wrote:
The XCF signalling services are available in all sysplex
environments, including monoplex. The rationale that motivates the
defining
session, not the TSO OMVS shell.
We're not calling our IEFUSI exit for the OMVS subsystem (SMFPRMxx).
What are other people doing for their OMVS virtual storage settings?
1) Don't restrict via IEFUSI (which you are not doing)
2) Set MAXASSIZE and MAXCORESIZE to 2147483647
--
Mark Zelden - Zelden
On Thu, 29 Mar 2012 08:42:33 -0500, Mark Zelden m...@mzelden.com wrote:
On Thu, 29 Mar 2012 09:13:33 -0400, Mark Jacobs mark.jac...@custserv.com
wrote:
We're receiving java out of memory errors during the build of a WASoem
server which I believe is related to our virtual storage settings
are treading new
territory
here and new function like this may work in the lab but issues like this can
crop
up in the real world.
I would open a PMR with IBM JES2 support and see what advise they have
for you.
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
On Thu, 29 Mar 2012 08:54:51 -0500, Mark Zelden m...@mzelden.com wrote:
On Thu, 29 Mar 2012 08:42:33 -0500, Mark Zelden m...@mzelden.com wrote:
On Thu, 29 Mar 2012 09:13:33 -0400, Mark Jacobs mark.jac...@custserv.com
wrote:
We're receiving java out of memory errors during the build of a WASoem
changes (which I missed working with so far) and don't
see it there either.
So when did a 7 digit range come in and how many years have you
been running with it?
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
number (nn) or at least 10 greater than the value used for
the lowest number (nn).
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com
;#9472;#9472;#9472;#9472;#9496;
Regards,
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http
On Thu, 29 Mar 2012 11:45:24 -0500, Mark Zelden m...@mzelden.com wrote:
On Thu, 29 Mar 2012 11:36:46 -0500, Doug Henry doug_he...@usbank.com wrote:
They were wrong. The change was
In z2 Mode, JES2 allows you to define up to 999,999 job numbers (expanding
the limit from 65534).
Doug
That's
or year end freezes if there were any delays in
installation and roll out of the new release.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
),
but I have with DLm.I've also worked with VSM, but it was always
backed by physical tape. BTW, the vendor is Oracle now, not Sun.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities
On Wed, 28 Mar 2012 09:16:29 -0500, Dana Mitchell mitchd...@gmail.com wrote:
On Wed, 28 Mar 2012 08:27:44 -0500, Mark Zelden m...@mzelden.com wrote:
I tend to agree. Too many shops I know of only upgrade because they don't
want to go beyond the EOS date.
But as long as we are supposing here
shouldn't have to refer to
it pre- HDS (or is that not even correct). Was the original just
called MAS (Mainframe Appliance for Storage).
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS
software that typically does required changes or more
extensive testing and verification to support z/OS changes.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http
has an asterisks that states that the
EOS date is projected, but that date should move to the right.
Mark
--
Mark Zelden - Zelden Consulting Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com
less key stroke. :-)
The problem with this discussion (that never seems to end) is that you can't
go back and rewrite history.Even if MVS was not a component of z/OS, or
IBM renamed the MVS component to something else, everyone would still call
it MVS.
Mark
--
Mark Zelden - Zelden
1 - 100 of 3666 matches
Mail list logo