Shai - I'm sorry to hear about your father
Nothing make my tears going down except my father sickness and his
death and the outcome of my father sickness to my belief.
Again, MFNetDisk is only fun. MFNetDisk is not issue which suppose to
make anybody of us unhappy.
Thanks,
Shai
On Thu, Jul 7,
I must admit I've been ignoring/deleting this drivel till now, but anybody
pissing on Sam and/or Frank (and their ilk) need to pull their bloody head(s)
in.
But as Sam just said, enough.
Shane ...
On Fri, Jul 8th, 2011 at 3:12 PM, Sam Golob wrote:
Hi Folks,
In response to the following
I am out of the office until 25/07/2011.
I will reply to your e-mail upon my return. Best regards, Simon
p.s. for any urgent technical matters please contact Mike Hall (ph: 132
426).
Note: This is an automated response to your message IBM-MAIN Digest - 6
Jul 2011 to 7 Jul 2011 (#2011-188)
Having just written a lengthy update, the new web interface tells me that 'a
server error occured' - all is gone. Next try.
Your graphic based on the number of engines online is a pretty clever idea.
But I was thinking that the number of online engines was just one way to
implement CoD. Do I
On Thu, 7 Jul 2011 21:50:24 -0400 Robert A. Rosenberg hal9...@panix.com
wrote:
:At 6:34 PM -0400 on 7/7/11, Shmuel Metz (Seymour J.) wrote about Re:
:Annoyance with the IEZJSAB macro:
:
:You're the one asking IBM to provide training wheels. An experience
:assembler program should know to
Hi folks,
I solve the problem using next JCL:
//STEP1 EXEC PGM=ICETOOL
//TOOLMSG DD SYSOUT=*
//DFSMSG DD SYSOUT=*
//IN1 DD DSN=file80,DISP=SHR
//IN2 DD
Hi,
I tried deleting the Uncataloged VSAM datset but I get the below following
error message :
IDCAMS SYSTEM SERVICES
DELETE U262316.VSAM.KSDS2.AIX.DATA -
NONVSAM
IKJ56228I DATA SET U262316.VSAM.KSDS2.AIX.DATA NOT IN CATALOG OR
IKJ56228I CATALOG CAN NOT BE ACCESSED
IDC0551I ** ENTRY
Tom Marchant wrote:
I seemed to be unable to use 'Quote Original text' function as it was
available in the previous version.
There is a graphic on the lower right, above the send message button to
quote the original message.
Yes! Thanks, after I hovered my rat, oops mouse :-D, over that two
On Fri, 8 Jul 2011 14:56:55 +0530 jagadishan perumal jagadish...@gmail.com
wrote:
:I tried deleting the Uncataloged VSAM datset but I get the below following
:error message :
:IDCAMS SYSTEM SERVICES
: DELETE U262316.VSAM.KSDS2.AIX.DATA -
: NONVSAM
:IKJ56228I DATA SET
hi Jags,
the easiest and best solution as per my understanding is to go for HATS
(Host access transformation services). this is an IBM Product used for
modernization of all 3270 applications. you can create EAR file
after development and deploy on a shared internet exposed application server
Yes! Thanks, after I hovered my rat, oops mouse :-D, over that two green
graphic things, I then saw the pop-up help text 'Quote Original Message' .
Whew! :-D
And here I thought I was the only one who didn't have a clue how to quote in
the new version :-)
Barbara
All,
sent these questions yesterday, really no ideas??
All, have just finished installing a suite of WebSphere
applications and have
(only..) two questions. I am aware of ../was.env and all of
the things one can
tweak in that file. Can I specify somewhere here that I
want
Ed,
Did I miss the email where Darren left you in charge? You have *no* right to
send anyone an email requesting a change in their behavior.
Shai is NOT a vendor...he sells nothing!
I am sure glad you had no influence over the development of Linux!
As to YOUR opinions and comments on this
That is actually what I did:
SET BDY (MVSTZN).
UCLIN .
REP PROGRAM(AGGDD) RMID(MAGG001).
REP PROGRAM(AGGDDEM) RMID(MAGG001).
REP PROGRAM(AGGACTRT) RMID(MAGG001).
REP PROGRAM(AGGFRONT) RMID(MAGG001).
Jags,
If you are looking for something to 'web enable' and SOA your mainframe take a
look at Ivory Service Architect from GT Software. IMHO MUCH better than HATS
and does a LOT more than just screen scraping.
http://www.gtsoftware.com/resources
My $0.02 without advertising since I am NOT a
On Thu, 7 Jul 2011 07:51:24 -0500, Elardus Engelbrecht
elardus.engelbre...@sita.co.za wrote:
Oh, come on Darren, please bring back the 'Quote Original text' function back!
Darren does not have to do anything... It is still there. Use the button with
the two teardrops just above the 'Send
I tried deleting the Uncataloged VSAM datset but I get the below following
error
message :
IDCAMS SYSTEM SERVICES
DELETE U262316.VSAM.KSDS2.AIX.DATA -
NONVSAM
IKJ56228I DATA SET U262316.VSAM.KSDS2.AIX.DATA NOT IN CATALOG OR IKJ56228I
CATALOG CAN NOT BE ACCESSED IDC0551I ** ENTRY
The answer is definitely number of CPUs times 60*10.
But another interesting question might be how many CPU seconds can I see
represented in control blocks and/or SMF records.
And the answer to that question will rely on whether you are running with
full-speed processors and have zAAPs/zIIPs
LISTC is not producing not any result. U262316.VSAM.KSDS2.AIX.DATA is
not allocated in any Catalog... This datasets are resultant of Restore..
On Fri, Jul 8, 2011 at 4:58 PM, Lizette Koehler stars...@mindspring.comwrote:
I tried deleting the Uncataloged VSAM datset but I get the below
If you do a 3.4 do you see the dataset?
The message you are getting says it doesn't exist, so if it isn't there you can
not delete it.
Recheck the name of the dataset
mace
--
For IBM-MAIN subscribe / signoff / archive access
And the answer to that question will rely on whether you are running with
full-speed processors and have zAAPs/zIIPs since, depending on the control
block you are examining, time running on a zAAP/zIIP might be normalized
to the speed of the standard CP (hence multiplied). ASCBEJST is one such
hi,
Can you try
DELETE U262316.VSAM.KSDS2.AIX.DATA VVR
or
DELETE U262316.VSAM.KSDS2.AIX.DATA file(DDNAME)
where DDNAME is the ddname like //DDNAME DD VOL=SER=VOLID1,UNIt=SYSDA
Thanks and Regards
Shameem K Shoukath
Slightly OT to your question but I would avoid VS 2010 like the plague. VERY
unstable.
http://social.msdn.microsoft.com/Forums/en-US/vswpfdesigner/thread/2cfaf28f-
80af-49ee-8408-07b4a8e0e964
http://social.msdn.microsoft.com/Forums/en-US/vcgeneral/thread/406c3c85-e541
-4cd2-82ad-15da392d180b
Hi,
I used the below JCL and it works perfectly :
//DELVS JOB MSGCLASS=X,MSGLEVEL=(1,1),CLASS=T,
// REGION=5M,NOTIFY=SYSUID
//DEFCSD EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//DD1 DD VOL=SER=CT3T04,DISP=SHR,UNIT=3390
//SYSIN DD *
DELETE U262316.VSAM.KSDS2.AIX.DATA VVR -
On Fri, 8 Jul 2011 05:24:14 -0500, Barbara Nitz nitz-...@gmx.net wrote:
Yes! Thanks, after I hovered my rat, oops mouse :-D, over that two green
graphic things, I then saw the pop-up help text 'Quote Original Message' .
Whew! :-D
And here I thought I was the only one who didn't have a clue how
We are in the same situation (on 1.9 and want to get to 1.12). After some
research I found that there was really no compat maintenance from 1.11 to 1.12,
so we just put on the compat maint for 1.9 to 1.10 and 1.9 to 1.11 and we're
currently trying the upgrade to 1.12. So far there have been
Represent the capacity of each CEC in 'SU's'. Perhaps with a reference
line for the base configuration.
IMO, the base configuration would be:
N = # of Physical CPs
Rate - Capacity rating (per engine). E.G. -Y02 has less capacity
that -Z02. Relative processor ratios are available from
I didn't think he was a vendor. What is he selling?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Ed Gould
Sent: Thursday, July 07, 2011 7:43 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Ads on IBM-MAIN
Jim:
I guess the real issue is that
On Thu, 7 Jul 2011 15:36:10 -0500, Tom Marchant m42tom-ibmm...@yahoo.com
wrote:
On Thu, 7 Jul 2011 07:51:24 -0500, Elardus Engelbrecht wrote:
I seemed to be unable to use 'Quote Original text' function as it was
available in the previous version.
There is a graphic on the lower right, above
On Thu, 7 Jul 2011 17:43:26 -0700, Ed Gould wrote:
I guess the real issue is that he stepped over the line.
That is _your_ opinion, but this is not your list. You posted your
opinion and many have disagreed with you. I have stayed out of this
until now, but you have posted the same opinion
Since when did IBM condone UCLIN to update RMIDs on supplied elements?
According to the latest z/OS Packaging Rules, SC23-3695-10, this is still
frowned upon (Section 5.10), and Section 8 offers MCS alternatives.
Regards,
Art Gutowski
Compuware Corporation
On Fri, 8 Jul 2011 07:09:02 -0400,
You can either have the logs maintained in JES2 or in the filesystem.
Most of the log specifications are located in the admin panels. If
you decide to have the logs in a filesystem, you could tail the
output.
Rob Schramm
Senior Systems Consultant
Imperium Group
On Fri, Jul 8, 2011 at 6:21
On 7/7/2011 12:48 PM, Alan Altmark wrote:
On Wed, 6 Jul 2011 08:39:51 -0400, Gary DiPillogdipi...@axiosproducts.com
wrote:
The challenge is that the code David refers to uses unpublished details of the
SERVICE CALL instruction and the SERVICE SIGNAL external interrupt, so it seems
Are you talking about redirecting SYSPRINT, etc.? If so, see the following:
SYSPRINT output, STDOUT and STDERR streams in an HFS File
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r0/index.jsp?topic=/com.ibm.websphere.zseries.doc/info/zseries/ae/xtrb_sysprint.html
Directing SYSPRINT Output
A vendor should certainly follow all published rules and guidelines for
sysmods packaged for delivery to customers. But we're talking about
customer generated usermods here: sysmods constructed to facilitate
in-house management of other folks' products. While imaginative, clever
ZAPs or
Thanks to everyone who responded, both on and off list. I have the COD ordered
and will order my 1.12 Serverpac today. I may try using our 1.9 system to
install the 1.12 SP but am going to wait until I see the COD doc before
deciding. At least our 1.9 system should have all available
Thank you Kevin and others for the tips. Navigating through the Admin Console
to find a cryptically named variable that might or might not be the right one
is not my cup of tea. Andre En Réponse à Neubert, Kevin
kevin.neub...@courts.wa.gov le 08 juil. 2011 18:01 Are you talking about
Hilario G. at IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu wrote on
07/08/2011 02:12:33 AM:
I solve the problem using next JCL:
//STEP1 EXEC PGM=ICETOOL
//TOOLMSG DD SYSOUT=*
//DFSMSG DD SYSOUT=*
//IN1 DD DSN=file80,DISP=SHR
//IN2 DD DSN=file210,DISP=SHR
Ed Gould at IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu wrote on
07/07/2011 05:43:26 PM:
...
Frank Yeager (sp?)
It's ae, not ea (Yaeger) as shown twice in my signature line.
ea is the more normal spelling, so I don't worry about it
when people get it wrong.
Frank Yaeger - DFSORT
Shane at IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu wrote on
07/07/2011 11:28:56 PM:
I must admit I've been ignoring/deleting this drivel till now, but
anybody
pissing on Sam and/or Frank (and their ilk) need to pull their
bloody head(s) in.
But as Sam just said, enough.
Shane,
G'Day All
Is there a better way to browse the parms of the Construct of a STORAGE GROUP
instead of using the ALTER option when in ISMF? If I type DISPLAY in the Line
Operator I receive error message COMMAND DISPLAY NOT FOUND. The reason why I
ask this question is that when I used the ALTER
I have found that if I exit with cancel instead of end that the last mod date
and user fields do not change.
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Mike Wickman
Technical Services
Phone 913-236-1663
Cell 913-449-6423
Fax 913-236-1555
email mwick...@waddell.com
Is there a better way to browse the parms of the Construct of a STORAGE
GROUP instead of using the ALTER option when in ISMF? If I type
DISPLAY in the Line Operator I receive error message COMMAND DISPLAY
NOT FOUND. The reason why I ask this question is that when I used the
ALTER option
Hello List,
We are migrating our environment from Z/VM , and Z/VSE to Z/OS.
We have here a lot of EXEC's that is used from VM OPERATOR to display,
activate, deactivate lines from VTAM.
We need now, transfer this EXEC's for run under TSO .
What We need, is execute this comands by operators unde
List, sorry,
We don't mentioned before, that what want, is execute a REXX from MASTER
Operator Console for ZOS.
Thanks,
Sergio Lima Costa
-Mensagem original-
De: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] Em nome de
Sérgio Lima Costa
Enviada em: sexta-feira, 8 de
Sergio,
If I understand your requirements correctly, I believe that System REXX may
fulfill them.
System REXX members may be invoked (by the AXR address space) from any console
by specifying _rexxname (or F AXR,rexxname)
_ is the command designator defined in PARMLIB member AXRnn
rexxname
Sounds like normal close processing was bypassed due to using CANCEL to being
used.
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Michael Wickman mwick...@waddell.com
Sender: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu
Date: Fri, 08 Jul 2011 12:40:09
To:
On 7/8/2011 11:00 AM, Sérgio Lima Costa wrote:
We don't mentioned before, that what want, is execute a REXX from MASTER
Operator Console for ZOS.
ITYW SystemREXX.
--
Edward E Jaffe
Phoenix Software International, Inc
831 Parkview Drive North
El Segundo, CA 90245
310-338-0400 x318
--snip
I think that Shai might want to consider a user group in Yahoo or
Google.
Am I the only one to have issues with both google and yahoo?
-unsnip-
Nope.
--snip---
Next in importance is lowering the Astonishment Factor.
programmers are accustomed to USINGs being preserved by
macro invocations regardless that the associated registers are
modified.
I've never assumed that
When I learned Assembler, I was taught that registers 1,1,14 and 15 could
NEVER be expected to remain unchanged accross a macro invokation.
Where is the second R1 maintained?
(8-{]}
-
Ted MacNEIL
eamacn...@yahoo.ca
Twitter: @TedMacNEIL
---snip-
QSAM is great if you don't want to mess with anything, but it has
the highest overhead.
Having looked at the channel programs for BSAM and QSAM, I doubt that.
If anything, the average use of BSAM is probably more
You can do that with automation software. We use CA-OPS to run REXX'.
On Fri, 08 Jul 2011 15:00 -0300, Sérgio Lima Costa
sergio.co...@cetip.com.br wrote:
List, sorry,
We don't mentioned before, that what want, is execute a REXX from MASTER
Operator Console for ZOS.
Thanks,
Sergio Lima
--snip--
Ed,
Did I miss the email where Darren left you in charge? You have *no* right to
send anyone an email requesting a change in their behavior.
Shai is NOT a vendor...he sells nothing!
I am sure glad you had
Andre,
Sending the WebSphere Application Server SYSPRINT to a file is covered in this
TechDoc:
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/TD101087
As for the use of log stream and the BBORBLOG log browse utility. I have found
it to be of little value. In all the ETR's I have
I concur with both of you ... IIRC, it's open/close that has the most
overhead.
Kind Regards
Jim Thomas
617-233-4130 (mobile)
636-294-1014(res)
j...@thethomasresidence.us (Email)
-Original Message-
From: IBM Mainframe Discussion List
We are looking to restrict a transaction from being run concurrently. We have
launched two other
transactions (the code below) that ENQ/DEQ this one transaction. Using
displays we were
expecting to see all of the displays of these two other transactions to follow
one after the other;
John,
Try specifying TASK on the ENQ and DEQ requests.
John P. Baker
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives
John,
At first glance, your code appears to be plausible, provided:
1) All transactions run in one and only one region (e.g. AOR).
2) You have some code following the EXEC CICS ENQ to detect ENQBUSY
If the transaction may run in multiple regions, I believe that you may need to:
1) Point to an
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of Starr, Alan
John,
At first glance, your code appears to be plausible, provided:
1) All transactions run in one and only one region (e.g. AOR).
2) You have some code following the EXEC CICS ENQ to detect ENQBUSY
You might consider the CLASSMAX. Assign the transaction to a unique
class number. Then set the CLASSMAX for that class number to 1. Similar
in concept to running with a single JES initiator handing an
serialized job class.
On Fri, 2011-07-08 at 12:07 -0700, John Weber wrote:
We are looking to
Hello List,
We open a PMR with IBM here, and now, our OFFLOAD run ok.
Below the Output from SYSLOG (Part) ..
$S OFFLOAD1,TYPE=TRANSMIT
$HASP000 OK
IEF234E D 0671,012613,,JES2,JES2
IEF196I IEF237I 0671 ALLOCATED TO SYS4
IEC501A M 0671,123456,SL,COMP,JES2,JES2,GRV.PROD.G123456
IEC507D E
Something like 'IOSE HMC REQUESTED SHUTDOWN IN PROGRESS' on the
system console for automation to react to?
On Fri, Jul 8, 2011 at 10:40 AM, Richard L Peurifoy
r-peuri...@neo.tamu.edu wrote:
On 7/7/2011 12:48 PM, Alan Altmark wrote:
On Wed, 6 Jul 2011 08:39:51 -0400, Gary
Ted MacNEIL wrote:
When I learned Assembler, I was taught that registers 1,1,14 and 15 could NEVER be expected to remain unchanged accross a macro invokation.
Where is the second R1 maintained?
(8-{]}
Pardon me; I meant R0. Finger check? :-)
Rick
I appreciated all of the good and prompt responses. It was really appreciated.
I did try
'task' just now with the same result. But this may just be the way our logic
is coded.
Now we are trying the approach of a shared resource ENQ/DEQ. We will test two
transactions
calling a transaction
íz{S©ì}êÄÊxjǺà*'µéíO*^µìmþZw!j»
Doesn't the TRanslate and Test instruction set R2 to an address?
On Fri, Jul 8, 2011 at 3:42 PM, Rick Fochtman rfocht...@ync.net wrote:
Ted MacNEIL wrote:
When I learned Assembler, I was taught that registers 1,1,14 and 15 could
NEVER be expected to remain unchanged accross a macro
We are mirroring our DISK and tape to a remote location for DR purposes.
About 3 weeks ago we did an exercise and brought the system up at the
remote location. It went great, except for one thing. Since we don't
mirror our page and spool we do a cold start on JES and we don't have a
copy of
Bryan, I have put my SYSOUT/SYSPRINT to a HFS directory of my choice which
more than suits me. Now the Unix chappies can cat and tail to their heart's
content. Appreciate the tip. Andre En Réponse à Bryan Klimek
klimek.br...@mayo.edu le 08 juil. 2011 20:44 Andre, Sending the WebSphere
Yes, but I'd expect anyone using it to be familiar enough with the
instruction to know that.
Rick
---
Mike Schwab wrote:
Doesn't the TRanslate and Test instruction set R2 to an address?
On Fri, Jul 8, 2011 at 3:42 PM, Rick
At 13:23 -0500 on 07/08/2011, Rick Fochtman wrote about Re: Annoyance
with the IEZJSAB macro:
--snip---
Next in importance is lowering the Astonishment Factor.
programmers are accustomed to USINGs being preserved by
macro
On 7/8/2011 5:12 PM, Mike Schwab wrote:
Doesn't the TRanslate and Test instruction set R2 to an address?
Tsk, tsk! g TRT is not a macro. And when it alters registers,
R1 is set to an address, and (low byte) of R2 to a value.
Gerhard Postpischil
Bradford, VT
I hardly ever go to the web site, but on seeing the comments here I headed over
to take a look.
Not being a regular user it did not strike me as being that different.
If there is anything about it that I don't like, it is that I get exactly the
same problem that I used to see on the odd
In article 6675795069199427.wa.woodagozemail.com...@bama.ua.edu you write:
For example, I just tried for July 2011, and on the first attempt I got
only a line with Logged in as: with Basic Mode over on the
right. On the second attempt it got as far as showing the column headers
Try putting
CICS ENQ/DEQ will work successfully as long as no SYNCPOINT is issued in the
running task. The SYNCPOINT will commit all records updated thus far and
will release all explicit and implicit ENQ's. Implicit ENQ's exist for any
record read for update and still not released or rewritten. Here is
Shai, Sorry about your father. My father is going through the same thing. It
hurts like hell.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
shai hess
Sent: Friday, July 08, 2011 9:08 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: End of
On Fri, 8 Jul 2011 17:48:02 -0400, Rich Greenberg ric...@panix.com wrote:
In article 6675795069199427.wa.woodagozemail.com...@bama.ua.edu you write:
For example, I just tried for July 2011, and on the first attempt I got
only a line with Logged in as: with Basic Mode over on the
right. On
Frank,
I apologize. I am using a $@-/ an IPAD and my spelling is terrible.
Ed
Sent from my iPad
On Jul 8, 2011, at 12:19 PM, Frank Yaeger yae...@us.ibm.com wrote:
Shane at IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu wrote on
07/07/2011 11:28:56 PM:
I must admit I've been
On Fri, 8 Jul 2011 16:43:22 -0500, Andy Wood woo...@ozemail.com.au wrote:
I hardly ever go to the web site, but on seeing the comments here I headed
over to take a look.
Not being a regular user it did not strike me as being that different.
If there is anything about it that I don't like, it
Sergio,
There are many options here and in my opinion you need to step back and to
remember to KISS(keep it simple xxx) .there are some long term issues that
you have to worry about like security and accountability. The security means
security people by offs (auditors as well)
It also
Kidding!
-
Ted MacNEIL
eamacn...@yahoo.ca
Twitter: @TedMacNEIL
-Original Message-
From: Rick Fochtman rfocht...@ync.net
Sender: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu
Date: Fri, 8 Jul 2011 15:42:52
To: IBM-MAIN@bama.ua.edu
Reply-To: IBM Mainframe Discussion List
Ward, Mike S wrote:
We are mirroring our DISK and tape to a remote location for DR purposes.
About 3 weeks ago we did an exercise and brought the system up at the
remote location. It went great, except for one thing. Since we don't
mirror our page and spool we do a cold start on JES and we don't
We started down this path in the late 90s. At the time we were concerned
about the extra traffic required to mirror spool, so we didn't--and had to
cold start JES2 each time. Aside from losing syslog, we had no way of
telling where batch processing had left off. It might make a big
difference
Does anyone have a copy of GPP-20 A High Level Macro Processor
Description - MACRO1? I'm willing to pay copying/mailing costs
if you'll send it to me.
John Ehrman
IBM Silicon Valley Lab
555 Bailey Avenue
San Jose, CA 95141
--
For
On Fri, 8 Jul 2011 17:29:25 -0500 Mark Zelden wrote:
On Fri, 8 Jul 2011 16:43:22 -0500, Andy Wood woo...@ozemail.com.au
wrote:
...
I go to the archives page and click on a particular month, and it
thinks for a while and then brings up a page with a list of posts,
but that page is often
HI,
I am looking for some people which have deep knowledge in IO, ZOS
internal, TCP and open systems.
This users list will not deal with MFN*** at all.
This group will help me with performance, IO effectiveness, net, IO
internal, MVS internal, value to set to improve the IO and the net,
86 matches
Mail list logo