connection here is far from
reliable.
--
Ori Idan
Yes, but most AT compliant PCI modems today are software only.
--
Ori Idan
On 2/6/07, Amos Shapira [EMAIL PROTECTED] wrote:
On 06/02/07, Diego Iastrubni [EMAIL PROTECTED] wrote:
ביום שני 05 פברואר 2007, 22:50, נכתב על ידי Oded Arbel:
Can this be done from Linux?
http://cables2
Remember that the CMOS also holds the time so doing such an operation will
reset the time.
--
Ori Idan
On 1/22/07, Shachar Shemesh [EMAIL PROTECTED] wrote:
Dan Shimshoni wrote:
Is there an API which enable me to perform such a task ?
Did anybody tried a thing like that ? and in case
More details on the lecture (in hebrew), can be found here:
http://www.oriidan.info/?action=updateid=arm7linux
--
Ori Idan
On 1/12/07, Shlomi Fish [EMAIL PROTECTED] wrote:
The Tel Aviv Linux Club ( http://www.cs.tau.ac.il/telux/ ) will gather
again
to hear Ori Idan talk about Running Linux
The correct link is: http://www.oriidan.info/?id=arm7linux
--
Ori Idan
On 1/12/07, Ori Idan [EMAIL PROTECTED] wrote:
More details on the lecture (in hebrew), can be found here:
http://www.oriidan.info/?action=updateid=arm7linux
--
Ori Idan
On 1/12/07, Shlomi Fish [EMAIL PROTECTED] wrote
Check font translation, make sure that David is translated to David CLM.
Also, install msttcorefonts.
--
Ori Idan
On 12/29/06, Micha Feigin [EMAIL PROTECTED] wrote:
possibly the locale settings? Try in a console to see if what $LANG is set
to
(in bash echo $LANG)
-Original Message
you modprobe the driver it will automaticly loads the firmware.
--
Ori Idan
On 12/29/06, Peter [EMAIL PROTECTED] wrote:
On Fri, 29 Dec 2006, Maxim Veksler wrote:
I OTOH, have good experience with:
- IBM (note: Not the new lenovo junk!)
- DELL
- and LG.
Most of the IBM, DELL laptops I
it provides. If you want to make your own
set, just invent something meaningful.
Oh, cool. Can I name the capabilities I provide in Swahili ?
I guess you can, but then only packages written in Swahili will be able to
use your package :-)
--
Ori Idan
Peter
This seems to me an X issue, however it is strange that on my system I can
not reproduce this bug.
I use debian unstable with x.org, with gnome 2.14.2 the bug does not appear
nither in firefox nor openoffice.
--
Ori Idan
On 12/26/06, Diego Iastrubni [EMAIL PROTECTED] wrote:
Unfortunately
not need asynchronous transfer since devices never
talk on their own will but allways as a result of the master issuing a query
command.
Disclaimer: All the above is written from my knowledge of GPIB (I have used
GPIB for more then 10 years) not with knowledge about this specific library.
--
Ori Idan
not start gdm or any other X program from the remote
computer. I allways get an error: cannot open display.
I tried setting the DISPLAY variable to my ip:0.0 and still get the same
error.
What am I doing wrong?
--
Ori Idan
firewall on both machines as they are on an internal
network not connected to the outside world.
--
Ori Idan
Oded Arbel wrote:
On Thu, 2006-12-21 at 14:13 +0200, Ori Idan wrote:
I have two computers on internal network (both of them Debian unstable)
I would like to login to a remote computer using
Network devices are special kind of devices, they do not appear in /dev
However the name of eth1 seems strange.
--
Ori Idan
On 12/17/06, Maxim Vexler [EMAIL PROTECTED] wrote:
Hi List,
I've have 2 NIC's in my home machine, a Intel(R) PRO/1000GT and a
RealTek RTL8139
When the system boots
be ready in about 3 weeks.
I can also give a rerun of one of my other presentations
--
Ori Idan
On 12/3/06, Shlomi Fish [EMAIL PROTECTED] wrote:
I'm CCing this to Linux-IL to get a broader audience.
Well, today Telux is going to have the last presentation in the Welcome
to
Linux series. So now we
I would be happy to hear both Muli and Shachar so it seems we have enough
presentation for a while...
--
Ori Idan
On 12/3/06, Shachar Shemesh [EMAIL PROTECTED] wrote:
Someone suggested, after http://blog.shemesh.biz/?p=405, that I offer a
lecture about why is 55 the smallest RSA public key
you probably mean 'watch -d cat /proc/interrupts'
On 11/24/06, Oren Held [EMAIL PROTECTED] wrote:
Yo man,
Is running 'watch -d /proc/interrupts' giving some additional
information WHAT causes the interrupts?
Itay Duvdevani wrote:
Hello all,
Running a Debian-testing (2.6.17-2-k7 stock
Did you try pllaner (http://live.gnome.org/Planner)
--
Ori Idan
Eran Tromer wrote:
Hi,
Can someone recommend some nice, lightweight project management software
for Linux? All such software I found so far is either long abandoned or
works as a one-way converter from some annoying text format
One of our clients need a full time linux programmer, familiar with
compiling linux packages, installing binary packages.
Familiarty with Debian considered an andvantage.
Please send CV's to [EMAIL PROTECTED]
--
Ori Idan
לצערי לא אוכל להגיע מאחר שאני בחול.
--
אורי עידן
Shachar Shemesh wrote:
Shlomi Fish wrote:
Hi all!
There would be a general assembly of the Hamakor members on Sunday,
08-August-2006, on 18:30 in Schreiber 007 or 006 in Tel Aviv University. A
הכוונה היא, כמובן, ל-13 באוגוסט, ולא
) freedom is not a religous war.
--
Ori Idan
Imri Zvik wrote:
Just to clarify - I was referring to Oron's comment more than anything
else, and it's the attitude that annoys me, not the request it self. I
see that a lot with Free Software supporters - it becomes a 'religious'
thing, i.e. they act
format (yes, the same request as YBA) to me
([EMAIL PROTECTED])
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL
Did I mention GPL or any other license?
I don't want a discussion of GPL free or not.
I am sure we all agree that even if GPL is not free, it gives you much
more freedom then any MS EULA.
Also, we where not talking about software but about free documents.
--
Ori Idan
Imri Zvik wrote:
Ori
Unfortunatly I will not be able to come...
--
Ori Idan
Ira Abramov wrote:
Quoting Gilad Ben-Yossef, from the post of Sat, 13 May:
Alon Altman wrote:
On Thu, 11 May 2006, Marc A. Volovic wrote:
We start amusing presentation at 3pm
Dinner at 3pm on a Monday?
I
Gilad Ben-Yossef wrote:
Ori Idan wrote:
I need to sleep until a message is aviliable in a message queue.
I can do it using msgrcv, however it will remove the message from the
queue.
Is there a way to do it without removing the message? I juast want to
wake up and not read the message yet
I need to sleep until a message is aviliable in a message queue.
I can do it using msgrcv, however it will remove the message from the queue.
Is there a way to do it without removing the message? I juast want to
wake up and not read the message yet.
--
Ori Idan
I will be happy to join the eaters.
Where will the dinner take place?
--
Ori Idan
Marc A. Volovic wrote:
Final 10 hours for Eaters' write in.
Menu shall be dictated solely by myself, since no one wanted to add/suggest
anything beyond a general request for meat from AJ and a request for
non
I am using Bank Hapoalim with firefox with no problems.
About the left to right, just do a refresh after you first enter the
site and it reverses back to right to left.
--
Ori Idan
Uri Even-Chen wrote:
Skliarouk Arieh wrote:
Hello,
I want to choose credit card service that is firefox
what's that.
The manger is Neora, you can contact her at: [EMAIL PROTECTED]
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail
?
I am looking to replace my old Palm V with Linux enabled PDA.
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL
/stree
If on the other machine I would extract it to /home/ori, everything
works fine.
It seems as if tar works with absolute path names for the symbolic links.
Anyone knows how to tell it to work with relational names?
--
Ori Idan
and logged in Ok.
Trying to log in using regular user I got the same error and then
returned to the login: prompt.
Does anyone have any idea what may cause this probelm?
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED
Oron Peled wrote:
On Friday, 3 בFebruary 2006 19:08, Baruch Even wrote:
Ori Idan wrote:
a message System bootup in progress after clicking Ok I returned to
the login screen.
At the start of the boot process the Debian initscripts will create a
file /etc/nologin, this message
No, it is not approved yet.
Which means you can not send a report generated by this software to the
IRS, however if you use this software only for invoices and internal
accounting and the yearly report is done by a CPA than it is Ok.
I am using this software for my invoices.
--
Ori Idan
Rami
Even if Suse only sold it, I think it is legal to copy, unless it had
some non-free software inside it.
--
Ori Idan
Noam Meltzer wrote:
ASFAIK, the 7.3 version was in the period of time when SuSE (preior
Novell era) didn't allow any1 to download the ISOs and only sold CDs.
So I believe
Most problems solved, the only problem remaining is that when I login to
gnome I get error:
No volume control elements and/or devices found.
I checked that my user is also in audio group and it does.
I checked premissions on /dev/dsp and still the problem remains
--
Ori Idan
While the problem
The problem is probably not premissions as I get the same error while I
login as root
--
Ori Idan
check also /dev/audio
Ori Idan wrote:
Most problems solved, the only problem remaining is that when I login to
gnome I get error:
No volume control elements and/or devices found.
I checked
: There was an error creating the child process for this
terminal
I tried changing to kde and still got the same error.
I tried loging in as root and it worked fine
I suspect this is something with premissions but I have no idea of what
file or directory
--
Ori Idan
want.
I also tried switching to kdm which did not help, each option I tried
returned me back to kdm.
I tried looking in /var/log/messages and could not find anything related.
Does someone have any idea?
--
Ori Idan
On Sat, Nov 12, 2005 at 02:26:53PM +0200, Ori Idan wrote:
I have just installed
Ori Idan wrote:
I tried both Failsafe gnome and Failsafe terminal options.
In failsafe gnome I got the splash screen and stack on this splash.
On failsafe terminal I got back to gdm.
I have GNOME, KDE and XFCE, I tried all of them and got the same error.
While on root I can log in to whatever
I need to add Nikud to a text I write.
I use debian unstable X.org and GNOME
Does someone have any idea how to set my keyboard layout so it supports
Nikud?
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED
I would be happy to give the FOSS lecture as I gave it last year.
--
Ori Idan
Shlomi Fish wrote:
During the month of October, all the Sundays will be occupied because of the
Jewish holidays. Thus, The Tel Aviv Linux Club will have a break until 13
November when the Welcome to Linux series
I did some research and found that ECI bought these modems from another
manufactorer in the far east (this is an OEM) so matters get a little
more complicated.
Who violated the GPL? it is either the original company whose identity I
don't know yet or ECI.
--
Ori Idan
Peter wrote:
On Sun
without any interruptions,
connection is good, serving 3 computers with DHCP and NAT, I had one
power failure and everything got back to normal without any intervention.
It still does not mean this is a good router, however it seems to work fine.
Well, it is a nice little linux box...
--
Ori
anyway?
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
shimi wrote:
On Fri, 2005-05-20 at 16:07 +0300, Ori Idan wrote:
I installed debian on an IBM thinkpad with LILO as it's boot loader,
when LILO starts is says: Loading Linux and then draws dots for few
seconds and then says BIOS check successfull and start to actualy load
the kernel
secured?
So for the time being Open source desktop is far more secured then XP
desktop.
--
Ori Idan
Tzahi Fadida wrote:
I think that something is misunderstood here. If you have a closed
source, that does not mean that you cannot find bugs to
exploit looking at the binaries. Those
If I remember correctly, you need to install Xprint (I think the package
is xprt) in order to print correctly from Mozilla.
--
Ori Idan
Michael Ben-Gershon wrote:
I can read Hebrew in Firefox and Thunderbird. However, Hebrew
text is always blank when printed. How can this be fixed?
I am
advantage.
Please send CV to: [EMAIL PROTECTED]
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
directly.
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
for Non IE browsers enough for me, I hear
the situation with other banks is much worse.
--
Ori Idan
Ilya Konstantinov wrote:
Alon Altman wrote:
Bank HaPoalim works fine for me in Mozilla. What problems did you
notice?
There are problems with certain functionalities.
For example, when doing a fund
of memory the kernel reads when it loads. In other architectures this
usualy passed to the processor via registers (R3 in case of PPC).
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe
programs I know must
use some version of if not.
This is another good example that there is no way to avoid violating
patents in software.
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe
questions rise during the lectures that are best answered by experts in
different fields.
--
Ori Idan
Shlomi Fish wrote:
Hi all!
This is a friendly reminder to remind everybody that the Welcome to Linux
series (http://welcome.linux.org.il/) starts at 3 November, 2004 (Wednesday)
in three places: Tel
should say, write me it before
wednesday.
Remember the time is short, it will be about 6 minutes.
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo
I also thought something similar :-)
Anyway, I mat with the interviewer and he is very pro FOSS so we are
going to get fair coverage.
After all it was his idea to do a piece on open source.
--
Ori Idan
[EMAIL PROTECTED] wrote:
Ori Idan wrote:
The show is called MicroScoop and will be shown
hebrew spam.
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
PROTECTED]
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
charset only defines what letter will be shown for each number, not the
order.
The -i was added for browsers to distinguish between visual and logical
hebrew.
--
Ori Idan
Matitiahu Allouche wrote:
From a pure character point of view, there is no difference between
iso-8859-8 and iso-8859-8-i
is cheaper than Windows
www.hamakor.org.il
Well done, Hamakor!
This was done by Alon Altman (Hamakor board member)
After we have seen that Microsoft publishes the old Windows TCO research
again.
--
Ori Idan
=
To unsubscribe, send mail
an asynchronous
way of knowing when it is ok to call shutdown without losing
information sent to the socket.
Shachar
I haven't seen anything about throwing the data, as much as I know,
close on the write side will
send any unsent data and then close.
--
Ori Idan
) just drop me a note.
--
Ori Idan
Gal Gur-Arie wrote:
As i understood - you are looking for a tree based forum.
Check out - http://phorum.org
Cheers,
Gal
Hetz Ben Hamo wrote:
Hi,
I'm looking for a forum manager program for a site that I'm
planning to design.
It should have:
1. Full hebrew support
I have just checked the www.yad-vashem.org.il web site using
mozilla-firefox and found no problems.
So I see no reason to write them about any problems with mozilla and I
can't see the problems...
It might be that they have fixed it.
--
Ori Idan
Ilya Konstantinov wrote:
Clicking Le Atar
to MFC
Tell us which one you used finaly...
--
Ori Idan
Micha Feigin wrote:
Hello,
I was asked to write a small program with a simple gui for someone for
some uni project.
I need to do this for windows, and since I rarely work with windows
nowadays, and I was planning on learning some gui toolkit
with my printer name, or what I think is the name (
mlc:usb:PSC_2200_Series ) and got the same error.
What do I miss?
I am using Debian unstable on IBM X31
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word
I am trying to install the above library but it says it depends on
xlib-dev which can not be installed since xlib is newer then the version
it expects.
Does anyone knows how to install libgtk2.0-dev on debian?
--
Ori Idan
about 50% of the actual
configuration parameters of gdm the rest is configurable from
/etc/gdm/gdm.conf
Hope this helps.
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g
the
premissions of each application.
--
Ori Idan
David Sapir wrote:
Hi,
I would like to know how to configure Gnome on RH9 for a specific user:
* control the menus from the start menu (which item will appear in the
menues)
* control which application a user can activate (run)
* require a root
it better, I would be happy to get them back.
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
the definitions and locations of network scripts etc. are very
similar to what you know in Red-Hat 7.3
As for SUSE, I have no idea, I have never used it and never installed it.
--
Ori Idan
Ben-Nes Michael wrote:
I'm going to install a new server and as usual im asking my self what distro
should
Yes, debian is slow in releasing updates for the stable tree (that does
not include security updates as much as I know).
However you can be sure that what they have in their stable tree is
absolutily stable.
You can use the unstable tree that in my opinion is stable enough.
Ben-Nes Michael
I am using HP PSC 2210 this is a multifunction printer that includes
scanner, printer and a fax.
You can also use the other models that do not offer fax, they are much
cheaper.
All are used through the HPOJ driver, I had no problems printing and
scanning from this printer using Mandrake and
think due to
both technical and marketing reasons windows is a propriatry operating
system and thus they would not want anyone to use it this way without
paying...
Another beuty of linux that you can build live-CD's...
--
Ori Idan
I am using OpenOffice with Culmus fonts and everything works very well.
I am using the standard version with english menus and enabled hebrew.
I have not yet tried the hebrew menus version as I don't like hebrew
menus...
--
Ori Idan
'
Does anyone have any idea what am I doing wrong?
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
for upgrading to 2.6
(and there are some), to make sure you are up to date.
If I recall correctly, you should, anyhow, type make and not make bzImage
Ez.
On Friday 26 December 2003 14:40, Ori Idan wrote:
I downloaded Kernel 2.6.0 from kernel.org
I used make gconfig to make my configuration
I tried using make defconfig and then it did compile, it is easier then
going through all the options to search for anything connected with IDE.
However, after compiling and rebooting the kernel, my sound card did not
work and I had no internet connection.
I tried installing prepackaged kernel
google for hours but found no clue.
Did anyone installed these styles and can tell me how to do it?
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo
Aaron wrote:
What distro do you run they are included in most distros.
Aaron
On Saturday 20 December 2003 08:25 pm, Ori Idan wrote:
I have downloaded Kernel 2.6.0 and tried 'make htmldocs' but it
complained that I have to install docbook styles.
I have docbook installed (I think) I have
KDE has always been slow for me, I moved to GNOME and now I am much happier.
I am not talking about boot time, that is not very interesting since I
hardly boot my computer, only when I have to go to windows.
--
Ori Idan
6
articles.
Article number 7 will be ready soon (I hope...)
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/Linux)
To unsubscribe, send
mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body
).
There is already a link from there to the first 4 articles.
However I think it would also be good to add them in this site, copy the whole
article not just a link.
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/Linux
I have installed a RH7.3 machine.
I enabled FTP in xinetd.d and restarted xinetd
However I still can not connect with FTP
I have checked with rpm -q that wu-ftpd is installed and it is installed
What might be going wrong here?
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU
On Friday 03 October 2003 17:23, Shaul Karl wrote:
On Fri, Oct 03, 2003 at 03:30:32PM +0200, Ori Idan wrote:
I have installed a RH7.3 machine.
I enabled FTP in xinetd.d and restarted xinetd
However I still can not connect with FTP
I have checked with rpm -q that wu-ftpd is installed
something that we do not see everyday on the
net.
Now not only that all recent problems are solved, things that did not work
before but I did not bother to fix are now working perfectly.
SO THANK YOU ALL AGAIN.
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/Linux
it but still no sound.
Does anyone have any idea?
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/Linux)
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run
-codec snd-pcm
snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 6276 0 [snd]
I previously installed on the same mother board Mandrake Linux 9.1 and it did
work so I assume that the Mandrake Kernel support this sound module.
--
Ori Idan
(This mail was sent using
: ./synthesis.hdlist2.cz
synthesis
}
Does anyone have any idea what the problem is?
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/Linux)
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word
:
alsamixer: function snd_ctl_open failed for default: No such file or directory
So it seems that something is not Ok after all...
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/Linux)
=
To unsubscribe, send mail
On Wednesday 24 September 2003 12:23, Oded Arbel wrote:
On Wednesday 24 September 2003 12:08, Ori Idan wrote:
I tried what Shlomi Fish had suggested, installed sndconfig and run it.
It said this sound module is not yet supported, it is strange since lsmod
responded that there is a module
-0.8rc7mdk installed (checked using rpm -q).
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/Linux)
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run
to change the encoding?
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/Linux)
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe
echo unsubscribe | mail [EMAIL PROTECTED]
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/Linux)
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
and installed the updated packages, but still, RHN gives
me the same error.
I assume it has something to do with the firewall blocking access or
something, does anyone know what port is used by rhn_register?
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/LINUX
RHN uses port 443 (https).
I ran nmap on the server and it reports that port 443 is open so this is not
the problem.
What else might cause rhn_register not to work?
--
Ori Idan
(This mail was sent using Kmail running on Mandrake GNU/LINUX
I try to run rhn_register on a remote machine.
I get the following error:
A socket error occured: (110, 'Connection timed out')
Does anyone have any idean what might cause this error?
Can it be the firewall?
If so, what port should I open in the firewall?
--
Ori Idan
(This mail was sent using
in Jerusalem.
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
that makes them powerful ?
I think it is not knowing the alternatives and being blinded by MicroSoft
about the alternatives.
Perhaps Hamkor should set up meetings with such a people to educate them about
the alternatives, I am willing to help in such meetings.
--
Ori Idan
, I
will not get thrown away because of timeout?
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
Ori Idan [EMAIL PROTECTED] writes:
I connect to a remote server using the command line FTP client.
The server is set that after a certain time of inactivity it closes the
connection.
Is there a way that the FTP client will send a keep alive message so
that if I live the client opened
not get my membership card also.
--
Ori Idan
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
201 - 300 of 308 matches
Mail list logo