hai,
that answer is not clear. The command gives values
like .35, 1.13, .75 etc... Can u elaborate on this..
regds..
--- Vinu Moses [EMAIL PROTECTED] wrote:
On Saturday 20 October 2001 05:35 pm, Bijoy Paul
wrote:
What is this load average shown for last 1 ,5 and
15
minutes. On what
Is there a way to have timestamp resolution to less than one second
Suppose I have a script that performs two operations on a file ... and both the
operations occur within one second ... now when I see the timetamp on the file after
each operation .. it shows the same time in both cases.
On
I want a webmail solution for our domain. We are running imap, and pop3.
I tried to use Jwebmail from jwebmail.sourceforge.net. For some reason i
dont know it didnt work. it was giving 500: internal server error. is
there any very good web mail service you guys can suggest me?
Thanks in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
+++ Sarath E R [linux-india] 22/10/01 12:57 +0530:
I want a webmail solution for our domain. We are running imap, and pop3.
I tried to use Jwebmail from jwebmail.sourceforge.net. For some reason i
dont know it didnt work. it was giving 500:
Vinu Moses wrote:
On Saturday 20 October 2001 05:35 pm, Bijoy Paul wrote:
It's the average number of process ready to run during the last 1, 5 and 15
minutes.
IIRC a load average more than 5 means that system is heavily loaded. But I
didn't believe my eyes when I saw a web site
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
+++ Shekhar [linux-india] 22/10/01 00:01 -0700:
We are running sendmail 8.10 as our mail server since 1 1/2 yr. Now a
days we r facing a prob of mail forgery. Some people r started sending mail
on other's name using telnet or by changing email
I have two cards in Squid Server.. One card with Internet IP another
with
local ip.. I am using ipchains to forward all traffic to Internet IP..
The clients system in local ip are able to browse even they are able to
text
chat with MSN messenger.. but Voice chat is not working.. any expert
Vijay Kumar [EMAIL PROTECTED]:
If I make the first partition of 3 GB will there be any problem in installing
Linux on it ??
I am aware that Lilo should reside in the first 1024 sector of the HDD.
No, I think the 1024 limit effect U if the /boot go
beyond ~6GB.
regards
Dileep Kumar M
Vijay Kumar [EMAIL PROTECTED]:
If I make the first partition of 3 GB will there be any problem in installing
Linux on it ??
I am aware that Lilo should reside in the first 1024 sector of the HDD.
No, I think the 1024 limit effect U if the /boot go
beyond ~6GB.
regards
Dileep Kumar M
Vijay Kumar [EMAIL PROTECTED]:
If I make the first partition of 3 GB will there be any problem in installing
Linux on it ??
I am aware that Lilo should reside in the first 1024 sector of the HDD.
No, I think the 1024 limit effect U if the /boot go
beyond ~6GB.
regards
Dileep Kumar M
hi vijay,
there will not be any problem if u make first partition of 3 gb.
the only thing to taken care of is that ur linux boot partition should lye
before 8gb. u make ur boot partition before this limit and install rest of
linux whereever u like. one more thing to tell is that it is
On Sun, 21 Oct 2001, Bijoy Paul wrote:
|hai,
|
|that answer is not clear. The command gives values
|like .35, 1.13, .75 etc... Can u elaborate on this..
Load is the ratio of amount of actual CPU cycles required to process all
running tasks to the number of CPU cycles avaiable.
so 0.35
Hi All,
I have faced this problem previously also but
that time I didn't gave this much importance. Now this
has become a serious problem. The problem which I am
facing is that when I access my Samba server with a
windows NT machine which has server pack 4 or above I
get a message This
Read sendmail's ref. thru net at sendmail's homepage or buy the O'reilly
book on sendmail.it is comprehensive.
You tried to send a mail to some recepeint at the command prompt at
verbose mode.
try this
#sendmail -v [EMAIL PROTECTED] some_text
[where some_text is the text file that contains
Sendmail -- Oreilly --Second edition is good.You can also read the howtos
from sendmail's homepage.
cheers
Ganesh Kumar
On Mon, 22 Oct 2001, Kunal Shah wrote:
Date: Mon, 22 Oct 2001 10:17:50 +0530
From: Kunal Shah [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [LIH] Artcile of
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
+++ a_akshay [linux-india] 22/10/01 15:25 +0530:
I have set 1 in /proc/sys/net/ipv4 . Which file in the linux source code
uses this ? I want to set it in the code itself rather than setting it in
/proc.
/proc is where you have to set it. The
And one more thing you can do is to restrict the shll access.ie.DONT GIVE
THEM ACCESS TO USE MAIL CLIENTS OTHER THAN ONE SPECIFIED.
you can create a login account and the email will be
[EMAIL PROTECTED] and he can telnet to your system.When he logs
in thru telnet automatically he is given mail
hi freind,
Do i need to recompile the RH7.1 kernel to enable IPV6. I want to run simple IPv6 version socket programs in either linux 6.2 or 7.1. How to acheive this? Plz guide me .I would be very great full to u .
thanking you
regards
nawazGet your FREE download of MSN Explorer at
Hi,
I have installed Postgresql 7.1 on Linux. It is
showing date as /mm/dd. But i want to change the
date in to dd/mm/, in the postgresql. How do i do
this. Please help me.
thanx
regards
mani
__
Do You Yahoo!?
Make a great connection at
Hi Guys,
I'm using Squid as Web proxy; do I need to use NAT using ipchains along with
squid? Is there any particular benefit - like increase in speed - in doing so?
This problem has been vexing me for some time... Please advise.
Regards
Ajay Shankar
Hai,
It depends on what kind of dolution you require.It is not required that you
do nating with ipchains for squid.But if your SQUID has a public IP and is
not behind a firewall then it is advisable to run ipchains/iptables.
Regarding speed,you should have ur ipchains/iptables rule sets
whats the difference betwn ftp n tcp-ip
yogi
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
It is a painful thing to look at your own trouble and know that
you yourself and no one else has made it.
On Mon, Oct 22, 2001 at 11:34:03AM +0530, Vinu Moses wrote:
On Monday 22 October 2001 10:32 am, Rajesh wrote:
I have applied the kernel patches from 2.4.2 onwards till 2.4.12 on the
sources of 2.4.1 given by PCQ. Now I have got a tar.gz file of 2.4.12
kernel with all the patches applied. I
On Mon, Oct 22, 2001 at 02:10:14PM +0530, Vijay Kumar wrote:
Hi,
I want to install Win2K and Linux on a single machine ( 10 GB HDD ).
The first Win2K partition should be at least 3 GB.
If I make the first partition of 3 GB will there be any problem in
installing Linux on it ??
I am aware
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
+++ LFC [linux-india] 22/10/01 16:32 +0530:
I'm using Squid as Web proxy; do I need to use NAT using ipchains along with
squid? Is there any particular benefit - like increase in speed - in doing so?
This problem has been vexing me for some
ftp is one of the protocols in the TCP/IP suite of protocols.The other
protocols are for eg:-SMTP,POP3 etc..
Anup
- Original Message -
From: Yogesh Dhond [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, October 23, 2001 5:48 AM
Subject: [LIH] difference
whats the difference
Err. That's not the case.
TCP/IP is a suit of protocols which contains IP protocols like ARP/RARP to
resolve routing and TCP protocols to handle assembling disassembling packets
into streams and vice versa.
Protocols like ftp/http are application level(IIRC) ones which are on top of
TCP/IP.
Try implementing Transparent proxying
http://www.unxsoft.com/TransparentProxy.html
regards
Vinoos
LFC wrote:
Hi Guys,
I'm using Squid as Web proxy; do I need to use NAT using ipchains along with
squid? Is there any particular benefit - like increase in speed - in doing so?
This problem
Good one Kedar. How about putting it in a short howto? Bit better formatted and
some things that might have miseed out.
It's a good piece of work..
Shridhar
KEDAR NAIK GAONKAR :-) wrote:
ftp --file transfer protocol...
tcp-ip ---transmission control protocol-- internet protocol
I know, I know, I shouldn't be nitpicking, but...
Kedar == KEDAR NAIK GAONKAR :-) [EMAIL PROTECTED] writes:
Kedar ftp --file transfer protocol... tcp-ip ---transmission
Kedar control protocol-- internet protocol
Kedar TCP/IP refers to a family of standards for connecting
http://www.redhat.com/software/linux/7-2_standard.html
Regards,
Vinu.
___
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
On Monday 22 October 2001 03:35 pm, Rajesh wrote:
Some confusion here. I am not Alan's kernel. PCQ had distributed Linus's
kernel 2.4.1 in their Jan 2001 issue( if my memory is correct ). It is a
tar.gz file. So no problems.
Oops! Sorry. I thought you meant the kernel that came out with pcq
Suresh Ramasubramanian wrote:
+++ Shridhar Daithankar [linux-india] 22/10/01 18:01 +0530:
Good one Kedar. How about putting it in a short howto? Bit better formatted
and some things that might have miseed out.
You want to cover this fully, start publishing the Richard Stevens book. :)
Hi Linux-ers,
I am new to these postings. I am a webmaster of the
site http://spacelinux.cjb.net which is basically a
Linux site with a lot of news, links (plenty and
neat), articles, docs, HOW-TO's, Help Guides etc which
also has an in-built search engine at your disposal.
Now i am planning
On Monday 22 October 2001 04:32 pm, LFC wrote:
I'm using Squid as Web proxy; do I need to use NAT using ipchains along
with squid? Is there any particular benefit - like increase in speed - in
doing so?
You wouldn't need to use nat with squid unless you're trying out
transparent proxying or
This email is to inform you of release '1.5.0beta2' of 'CheckInstall'
through freshmeat.net. All URLs and other useful information can be found
at http://freshmeat.net/projects/checkinstall/
The changes in this release are as follows:
The invalid option error when creating rpm packages has been
Hi,
http://www.xwinman.org/vote.html
Peace
--
Rajesh
http://www.symonds.net/~rajesh/* Powered By: Debian GNU/Linux
Kernel 2.4.12(ext3)
:
[Linux One Stanza Tip] From : [EMAIL PROTECTED]
LOST #064-** Sub : Hard Disk packing
hii,
This sounds something differenet from what Raju was
telling. So i made a google search and got two links
with contradictory information, 1 supports raju and
the other kingsly..
http://lithos.gat.com/docview/load_average.html
http://www.useforesite.com/uptime.shtml
Also if kingsly is
Hi,
I have installed PCQ Linux 7.1 on a dual boot m/c with bare bones KDE
installation on a 900 MB partition.When I tried to install EE(Electric Eyes)
program later, (from RPM file) the error message came saying that libz.so.1
is needed by the program. But when I checked for that program
#
Hi all,
Sorry about the late reply. The PC was on th blink and today only
it was made alright.
I tried lsmode command and yes, parport is loaded. The following was the
outout (alongwith other modules)
ModuleSize Used by
sound core 4432 0
Hi
N S Srikanth wrote:
# ls libz.so.1
it was showing a symbolic link libz.so.1---libz.so.1.1.3
Do an rpm -qf /usr/lib/libz.so.1 If that file doesn't belong to a rpm, it will
show a dependency problem. But you can go ahead with --no-deps etc.. It should run.
On one of my Mandrake8
Hello all,
I am having problems getting my HP 7200 external parallell
port CD writer . The epat, pg, sg, paride modules for kernel 2.4.2-2 get
insmod'ed properly. However whenever i startup cdrecord or xcdroast
the program complains could not find any scsi drives. Can some one
please
On Sat, 20 Oct 2001, Dr . Sharukh K . R . Pavri . wrote:
look what your /usr/X11R6/bin/X soft links to. If its something like
No it is link to Xwrapper.
xwrapper is just a setuid wrapper over your X. The 3.3.* needed to be
setuid root. X.4.* does not. You can change the soft link to point to
On Sun, 21 Oct 2001, Kinjal Sonpal wrote:
and dialer in gnome also, but with no help :-( My ISP is
Roltanet.
Wvdial always exits with an error code 17 which says that it has
detected *serial loopback*. Previously it used work without any
In all probability the ISP's ppp server is too slow
On Sun, 21 Oct 2001, Suresh Ramasubramanian wrote:
Plz help me out with the problem. Btw, what is serial loopback?
loopback = 127.0.0.1 (man lo for more)
ppp's is a very hardwar'ish loopback, ie packets getting bounced from
the remote modem. The terminology is perhaps accidental ;)
--
- Original Message -
From: Shridhar Daithankar [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, October 20, 2001 10:45 AM
Subject: Re: [LIH] the ultimate linux machine the indian version
Oh sure. But rememeber to find a 'Made for athlon heat sink'. If AMD
wished they
could
Hi,
Read this to understand the meaning of different types of quotes used in
bash and their usage.
http://www.linux-mag.com/2001-07/newbies_01.html
Peace
--
Rajesh
http://www.symonds.net/~rajesh/* Powered By: Debian GNU/Linux
Suresh Ramasubramanian wrote on Sunday, October 21, 2001
Can you dial in from 'doze?
Yes, without probs. Infact, today I got this error only once. I
tried once more and I was lucky enough to get connected. However,
the connection was not very good as sometimes I had to wait for a
couple of
Sounds good.Why dont you create a sample and post it in your site ?
cheers
Ganesh Kumar
On Mon, 22 Oct 2001, Praveen Kannan wrote:
Date: Mon, 22 Oct 2001 07:21:27 -0700 (PDT)
From: Praveen Kannan [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [LIH] Need Your Feedback for a Linux site
On Mon, Oct 22, 2001 at 10:19:32AM +, khader nawaz khan wrote:
Do i need to recompile the RH7.1 kernel to enable IPV6.
I want to run simple IPv6 version socket programs in either
linux 6.2 or 7.1. How to acheive this? Plz guide me.I would be
very great full to u .
On Monday 22 October 2001 16:12, Sreangsu Acharyya wrote:
In all probability the ISP's ppp server is too slow to startup. So
when your ppp daemon sends the link configuring packets they just get
bounced from the remote modem, thereby giving a *serial loopback*
It happens on the bad days, but
On Monday 22 October 2001 08:11 pm, N S Srikanth wrote:
I have installed PCQ Linux 7.1 on a dual boot m/c with bare bones KDE
installation on a 900 MB partition.When I tried to install EE(Electric
Eyes) program later, (from RPM file) the error message came saying that
libz.so.1 is needed
Kingsly John wrote on Monday, October 22, 2001
I remember reading someplace that you need to have a hostname
declared or
something to prevent this from happening.
Actually I did not find any docs on troubleshooting for ppp(d).
Man pppd only gives meaning of all the exit codes. And I don't
On 22/10/01 10:48 +0100, Abhishikt Rehmat Masih wrote:
windows NT machine which has server pack 4 or above I
get a message This account is not authorised to logon
from this station
has anyone faced this problem and
can anyone suggest some solution to it.
You have to set a
date -s MM/DD/YY hh:mm:ss
works on linux. u can try in unix.
nimish
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 22, 2001 9:17 AM
To: [EMAIL PROTECTED]
Subject: Re: [LIH] OT Time changing
wow! one hell of a newbie question! i think
My Compaq server behaves the same way and i shut it down, once it says Power
Down on linux.
nimish
-Original Message-
From: Kunal Shah [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 22, 2001 10:08 AM
To: [EMAIL PROTECTED]
Subject: Re: [LIH] (no subject)
r u comparing it with shutdown
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
+++ [EMAIL PROTECTED] [linux-india] 23/10/01 10:41 +0530:
Thanks for the replies.
There is SMTP auth supported in 8.10.x onwards. Though I never been
successful implementing this as yet I could not compile sendmail
successfully. Will SMTP auth
[Forwarding without prejudice. Please CC replies to the sender.
-- Raju]
dear sir
We are working on ERP which is based on VB and oracle
8i ,now we want to switch to linux and want to run our
ERP system on linux which will be on 50 nodes.
I want to know that whether oracle and VB can work on
[EMAIL PROTECTED] wrote:
how do I set the hostname on my Red Hat 7.1 linux box...I tried editing
rc.sysinit, /etc/hostname and also tried the hostname command.. somehow
each time it boots up as localhost.localdomain...I don't have linuxconf
installed...
thanks..
Hemang
59 matches
Mail list logo