Re: error in converting pdf formatted figure

2021-03-30 Thread Wolfgang Engelmann
Am 30.03.21 um 18:06 schrieb Wolfgang Engelmann: Am 30.03.21 um 17:20 schrieb Yu Jin: Am Di., 30. März 2021 um 11:50 Uhr schrieb Wolfgang Engelmann mailto:engelm...@uni-tuebingen.de>>:     A colleague of mine is not able to see a graphic in a float figure, if     it is in pdf

Re: error in converting pdf formatted figure

2021-03-30 Thread Wolfgang Engelmann
Am 30.03.21 um 17:20 schrieb Yu Jin: Am Di., 30. März 2021 um 11:50 Uhr schrieb Wolfgang Engelmann mailto:engelm...@uni-tuebingen.de>>: A colleague of mine is not able to see a graphic in a float figure, if it is in pdf or eps format. png works. The error message is

Re: error in converting pdf formatted figure

2021-03-30 Thread Doug Martin
On Tue, Mar 30, 2021 at 9:21 AM Yu Jin wrote: > Am Di., 30. März 2021 um 11:50 Uhr schrieb Wolfgang Engelmann < > engelm...@uni-tuebingen.de>: > >> A colleague of mine is not able to see a graphic in a float figure, if >> it is in pdf or eps format. png works. Th

Re: error in converting pdf formatted figure

2021-03-30 Thread Yu Jin
Am Di., 30. März 2021 um 11:50 Uhr schrieb Wolfgang Engelmann < engelm...@uni-tuebingen.de>: > A colleague of mine is not able to see a graphic in a float figure, if > it is in pdf or eps format. png works. The error message is > error in converting (or something similar, he has

error in converting pdf formatted figure

2021-03-30 Thread Wolfgang Engelmann
A colleague of mine is not able to see a graphic in a float figure, if it is in pdf or eps format. png works. The error message is error in converting (or something similar, he has German setting). We have tried to compare my and his settings in the document and tools settings and did not find

Re: Changing Figure Labelling in LyX

2021-03-19 Thread Dr Eberhard W Lisse
scientific papers for my undergraduate degree. In writing one of my reports, I found myself wanting to change the way the figures are labelled. I have managed to change the figure labelling from “Figure 1, Figure 2, Figure 3…” to labelling per section “Figure 1.1, Figure 1.2, Figure 2.1…” However

Re: Changing Figure Labelling in LyX

2021-03-18 Thread Paul A. Rubin
the figure labelling from “Figure 1, Figure 2, Figure 3…” to labelling per section “Figure 1.1, Figure 1.2, Figure 2.1…” However, I was wondering if there was a way to change it to say “Fig. 1.1”, instead of “Figure 1.1” I’ve also changed the size of the font inside the caption to be smallest

Changing Figure Labelling in LyX

2021-03-18 Thread Philippe Burden
To whomever this may concern, I have recently started using LyX to write scientific papers for my undergraduate degree. In writing one of my reports, I found myself wanting to change the way the figures are labelled. I have managed to change the figure labelling from "Figure 1, Fig

Re: blurish pdf figure

2021-03-15 Thread Wolfgang Engelmann
blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang With pyxplot (similar to gnuplot, but better): http://www.pyxplot.org.uk/ #Kidd_2015-model reset set multiplot set term pdf set width 6 set output './Kidd_2015

Re: blurish pdf figure

2021-03-15 Thread Dr Eberhard W Lisse
Maybe, maybe not. For me it has always worked very well. And for graphs it should should be ok. Perhaps try both. el On 2021-03-15 19:53 , Neal Becker wrote: Doesn't rsvg-covert output raster, which would be lower quality than inkscape vector output? [...] -- lyx-users mailing list

Re: blurish pdf figure

2021-03-15 Thread Neal Becker
Doesn't rsvg-covert output raster, which would be lower quality than inkscape vector output? On Mon, Mar 15, 2021, 1:44 PM Dr Eberhard W Lisse wrote: > That should read SVG of course. > > LyX finds rsvg-convert on the Mac when libsvg is installed, which > has a smaller footprint than inkscape

Re: blurish pdf figure

2021-03-15 Thread Dr Eberhard W Lisse
That should read SVG of course. LyX finds rsvg-convert on the Mac when libsvg is installed, which has a smaller footprint than inkscape and very good qualitywise. greetings, el On 2021-03-15 19:29 , Dr Eberhard W Lisse wrote: > Wolfgang, > > make it export SVGA and use that :-0-O > > el [...]

Re: blurish pdf figure

2021-03-15 Thread Dr Eberhard W Lisse
, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang With pyxplot (similar to gnuplot, but better): http://www.pyxplot.org.uk/ #Kidd_2015-model reset set multiplot set term pdf set width 6 set output

Re: blurish pdf figure

2021-03-15 Thread Paul A. Rubin
output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang With pyxplot (similar to gnuplot, but better): http://www.pyxplot.org.uk/ #Kidd_2015-model reset set multiplot set term pdf set width 6 set output './Kidd_2015-B.pdf' set fontsize 0.65 set key top right set

Re: blurish pdf figure

2021-03-15 Thread Wolfgang Engelmann
to a pixel figure. What is wrong? Wolfgang With pyxplot (similar to gnuplot, but better): http://www.pyxplot.org.uk/ #Kidd_2015-model reset set multiplot set term pdf set width 6 set output './Kidd_2015-B.pdf' set fontsize 0.65 set key top right set origin 0,0 set xtics ("12" 12, "18&

Re: blurish pdf figure

2021-03-15 Thread Dr Eberhard Lisse
Wolfgang, how is this produced? el On 12/03/2021 12:01, Wolfgang Engelmann wrote: If I insert the graphic (appended) in a lyx document, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang

Re: blurish pdf figure

2021-03-15 Thread Wolfgang Engelmann
Am 14.03.21 um 17:08 schrieb Paul A. Rubin: On 3/12/21 5:01 AM, Wolfgang Engelmann wrote: If I insert the graphic (appended) in a lyx document, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang

Re: blurish pdf figure

2021-03-14 Thread Paul A. Rubin
On 3/12/21 5:01 AM, Wolfgang Engelmann wrote: If I insert the graphic (appended) in a lyx document, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang Are you saying that it looks blurry in the LyX

blurish pdf figure

2021-03-12 Thread Wolfgang Engelmann
If I insert the graphic (appended) in a lyx document, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang Kidd_2015-B.pdf Description: Adobe PDF document -- lyx-users mailing list lyx-users

SOLVED > Re: Again: sidecap figure

2021-03-04 Thread Wolfgang Engelmann
Wolfgang The problem is that you defined \FigBesBegin and \FigBesEnd with capital "F" but invoked them with lowercase "f" (as in \figBesBegin). If you correct that, the document compiles. Paul Sorry about it, and thanks a lot, Paul, for your help. Wolfgang -- lyx-users mailing list

Re: Again: sidecap figure

2021-03-04 Thread Paul A. Rubin
{table}[1]{\begin{SCtable}[#1]##1}{\end{SCtable}}} \newcommand{\TabBesEnd}{%   \let\table\MyTable   \let\endtable\MyEndtable} \newcommand{\FigBesBeg}[1][1.0]{%   \let\MyFigure\figure   \let\MyEndfigure\endfigure   \renewenvironment{figure}[1]{\begin{SCfigure}[#1]##1}{\end{SCfigure}}} \newcommand

Again: sidecap figure

2021-03-04 Thread Wolfgang Engelmann
{SCtable}}} \newcommand{\TabBesEnd}{%  \let\table\MyTable  \let\endtable\MyEndtable} \newcommand{\FigBesBeg}[1][1.0]{%  \let\MyFigure\figure  \let\MyEndfigure\endfigure  \renewenvironment{figure}[1]{\begin{SCfigure}[#1]##1}{\end{SCfigure}}} \newcommand{\FigBesEnd}{%  \let\figure\MyFigure  \let

sidecap figure

2021-03-02 Thread Wolfgang Engelmann
\let\endtable\MyEndtable} \newcommand{\FigBesBeg}[1][1.0]{% \let\MyFigure\figure \let\MyEndfigure\endfigure \renewenvironment{figure}[1]{\begin{SCfigure}[#1]##1}{\end{SCfigure}}} \newcommand{\FigBesEnd}{% \let\figure\MyFigure \let\endfigure\MyEndfigure} In the document I use in ERT \FigBesBeg

Re: Koma-script Book Figure/Table numbering.

2021-02-15 Thread Norman Dunbar
On 04/02/2021 16:42, José Abílio Matos wrote: It seems that this is on purpose due to using parts. ... In LyX you can do it, in the master document, with: Document -> Settings -> Document Class -> Class Options -> Custom and inserting in the Custom field: numbers=noendperiod I hope that

figure and legend on opposite pages

2021-02-08 Thread Wolfgang Engelmann
I have a float figure. Its legend is too long to fit on a page. I would like to have the figure placed on one page and the legend on the opposing page. How could i do that in lyx? I am using KOMA-script book A5. Wolfgang -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org

Re: Koma-script Book Figure/Table numbering.

2021-02-04 Thread José Abílio Matos
is on purpose due to using parts. I had to search for the solution: https://tex.stackexchange.com/questions/179285/redefine-figure-counter-with-scrbook In LyX you can do it, in the master document, with: Document -> Settings -> Document Class -> Class Options -> Custom and

Re: Koma-script Book Figure/Table numbering.

2021-02-04 Thread Norman Dunbar
On 04/02/2021 14:32, Paul A. Rubin wrote: On the subject of upgrading, you can get a .deb file by adding the developer PPA as a software source, doing a refresh in the update manager, and then updating LyX. Here's the line for adding the PPA: deb

Re: Koma-script Book Figure/Table numbering.

2021-02-04 Thread Paul A. Rubin
On 2/4/21 9:25 AM, Rich Shepard wrote: On Thu, 4 Feb 2021, Norman Dunbar wrote: * Lyx 2.2.4 (From the Mint distro, not downloaded.) Norman, Could be an issue fixed since then. The current version is 2.3.6.1. I have a test case if anyone is interested, but I doubt I'd be allowed to attach

Re: Koma-script Book Figure/Table numbering.

2021-02-04 Thread Rich Shepard
On Thu, 4 Feb 2021, Norman Dunbar wrote: * Lyx 2.2.4 (From the Mint distro, not downloaded.) Norman, Could be an issue fixed since then. The current version is 2.3.6.1. I have a test case if anyone is interested, but I doubt I'd be allowed to attach it to a list posting, especially as a

Koma-script Book Figure/Table numbering.

2021-02-04 Thread Norman Dunbar
. I have a book in progress, hopefully to be published "soon". I wrote my previous book in ASCIIDoctor-pdf and it was a total nightmare when the publisher wanted a re-jig of the chapters as the table/figure/listings all had to be manually renumbered. I have some experience with pure La

Re: Same figure entered twice [FIXED]

2020-06-16 Thread Rich Shepard
On Wed, 17 Jun 2020, Daniel wrote: Looks like the snipped is not well-formed lyx code (e.g. has a stray \begin_layout tag). Can you reproduce a minimal example as a lyx-file? Daniel, I discovered out how I entered the same figure twice: I had entered it last week when I wrote the document

Re: Same figure entered twice

2020-06-16 Thread Daniel
On 2020-06-17 01:56, Rich Shepard wrote: I've no idea how I managed to enter the same figure twice, but I did. LyX finds the same place when I search for both Figure 1 and Figure 2 using the Navigate -> Figures menu. Looking at the .lyx file in emacs I think the following encompasses b

Same figure entered twice

2020-06-16 Thread Rich Shepard
I've no idea how I managed to enter the same figure twice, but I did. LyX finds the same place when I search for both Figure 1 and Figure 2 using the Navigate -> Figures menu. Looking at the .lyx file in emacs I think the following encompasses both instances: \begin_layout Standard The ent

Re: Convert float figure to float table?

2019-09-28 Thread Rich Shepard
On Sat, 28 Sep 2019, Paul A. Rubin wrote: Right-click the float's "handle", click Settings..., and change the float type in the first setting. Then buy your spelling checker an extra large (regular) coffee, since it was apparently too sleepy to catch "cafinated". ;-) Paul, Missed both.

Re: Convert float figure to float table?

2019-09-28 Thread Paul A. Rubin
On 9/26/19 1:14 PM, Rich Shepard wrote: I goofed and put a table in a figure float. Can I directly convert it? If not I'll cut-and-past the table elsewhere, create a table float and put it in there. Must not have been sufficiently cafinated when I did this. TIA, Rich Right-click the float's

Re: Convert float figure to float table?

2019-09-26 Thread Scott Kostyshak
On Thu, Sep 26, 2019 at 10:14:19AM -0700, Rich Shepard wrote: > I goofed and put a table in a figure float. Can I directly convert it? Maybe if you edit the .lyx file with a text editor (which I don't recommend). I think the feature you're hoping for (which doesn't exist yet) would be a lay

Convert float figure to float table?

2019-09-26 Thread Rich Shepard
I goofed and put a table in a figure float. Can I directly convert it? If not I'll cut-and-past the table elsewhere, create a table float and put it in there. Must not have been sufficiently cafinated when I did this. TIA, Rich

Re: Add caption to unfloated figure

2019-09-23 Thread Rich Shepard
On Mon, 23 Sep 2019, Richard Kimberly Heck wrote: Longtable has its own caption support. It's possible there is some graphics package that does so, as well. Riki, I had assumed that because longtable can have captions so could graphics. Now I know that's not so. Of course, not all figures

Re: Add caption to unfloated figure

2019-09-23 Thread Richard Kimberly Heck
id. > > Riki, > > That's the conclusion I reached when I found no way to add a caption to a > non-floating figure. I can for long, multipage table but not for a static > figure outside a float environment. Longtable has its own caption support. It's possible there is some graphics package that does so, as well. Riki

Re: Add caption to unfloated figure

2019-09-23 Thread Rich Shepard
to a non-floating figure. I can for long, multipage table but not for a static figure outside a float environment. Thanks, Rich

Re: Add caption to unfloated figure

2019-09-23 Thread Rich Shepard
On Mon, 23 Sep 2019, Jean-Marc Lasgouttes wrote: You can specify individually "Here" for each figure that should not float. JMarc, Thank you. I thought this is the solution. Regards, Rich

Re: Add caption to unfloated figure

2019-09-23 Thread Richard Kimberly Heck
On 9/23/19 5:08 PM, Jean-Marc Lasgouttes wrote: > Le 23/09/2019 à 22:30, Rich Shepard a écrit : >> When I use Insert -> Caption with the cursor immediately before and >> immediately after the figure lyx tells me is's 'senseless.' None of the >> manuals seem to expl

Re: Add caption to unfloated figure

2019-09-23 Thread Jean-Marc Lasgouttes
Le 23/09/2019 à 22:30, Rich Shepard a écrit : When I use Insert -> Caption with the cursor immediately before and immediately after the figure lyx tells me is's 'senseless.' None of the manuals seem to explain how to add a caption to a graphic image; makes me wonder why it's in the Insert m

Add caption to unfloated figure

2019-09-23 Thread Rich Shepard
When I use Insert -> Caption with the cursor immediately before and immediately after the figure lyx tells me is's 'senseless.' None of the manuals seem to explain how to add a caption to a graphic image; makes me wonder why it's in the Insert menu. Is the only option to use Settings ->

Sporadically incorrect figure layout in two-column Article

2019-09-18 Thread list_email
for some text in the same column. Other times, the two figures occupy the entire column and leave lots of empty white space above and below each figure but no text there. I can’t figure out what causes it to happen except that it can happen after adding or deleting some text before the first

Re: Beamer class: figure on separate page from frame title

2018-12-06 Thread Rich Shepard
On Thu, 6 Dec 2018, Paul A. Rubin wrote: If you create a second document (beamer presentation) with the same theme etc., but with just the last slide and its image, does the same thing occur? If yes, can you post it as an MWE for us to ponder? If not, maybe deleting the last slide and

Re: Beamer class: figure on separate page from frame title

2018-12-06 Thread Paul A. Rubin
On 12/5/18 4:52 PM, Rich Shepard wrote: With all I did adding notes to the presentation I inadvertently created an issue whose solution evades me.   Each frame, but one (and the last frame), has a thin 'end{frame}' line separating it from the following frame. The one that does not has a PDF

Beamer class: figure on separate page from frame title

2018-12-05 Thread Rich Shepard
With all I did adding notes to the presentation I inadvertently created an issue whose solution evades me. Each frame, but one (and the last frame), has a thin 'end{frame}' line separating it from the following frame. The one that does not has a PDF image inserted. When I view the

Re: LyX & graphics/figure preview

2018-10-09 Thread Daniel
On 09/10/2018 14:45, Bernt Lie wrote: Previews of graphics in floating figures tend to be small and sometimes of very poor resolution. If I increase the magnification in LyX, the figures look really ugly. Is there a way to increase the preview quality? (The original files are typically

LyX & graphics/figure preview

2018-10-09 Thread Bernt Lie
Previews of graphics in floating figures tend to be small and sometimes of very poor resolution. If I increase the magnification in LyX, the figures look really ugly. Is there a way to increase the preview quality? (The original files are typically either *.svg or *.pdf.) -B

Re: Figure layout messed up when exporting to latex and importing again

2018-09-03 Thread Uwe Thuemmel
Great. Thanks. I'm looking forward to the new release. Uwe On 31.08.18 16:08, Jürgen Spitzmüller wrote: Am Freitag, den 31.08.2018, 14:57 +0200 schrieb Uwe Thuemmel: I often go back and force between LyX and LaTeX. Unfortunately, exporting from LyX to LaTeX (pdflatex) and importing again

Re: Inserting half-column figure in text

2018-09-01 Thread Rich Shepard
On Sat, 1 Sep 2018, Ricardo Berlasso wrote: Just a general warning: the wrapfig package used by this option is a bit "unpredictable" with its default options: if the wrapfig figure ends up near the lower edge of the page, it could disappear from the output without warnin

Re: Inserting half-column figure in text

2018-09-01 Thread Ricardo Berlasso
El sáb., 1 sept. 2018 a las 0:43, Rich Shepard () escribió: > On Sat, 1 Sep 2018, Kornel Benko wrote: > > > What you seem to be after is maybe a wrapped figure, like the attached. > > (Insert->Float->Figure Wrap Float) > Just a general warning: the wrapfig package u

Re: Inserting half-column figure in text

2018-08-31 Thread Rich Shepard
On Sat, 1 Sep 2018, Kornel Benko wrote: What you seem to be after is maybe a wrapped figure, like the attached. (Insert->Float->Figure Wrap Float) Kornel, Well! Shame on me! In the many years I've used LyX I've not noticed that menu choice. Mea culpa! Thanks for pointing out the o

Re: Inserting half-column figure in text

2018-08-31 Thread Kornel Benko
ght of this and was unsure how to fill the one minipage with > existing text. > >Is there a way to cut-and-paste a bunch of text and have it automagically > flow out of the mini page when it reaches the end? To insert a half-page > figure in the midst of existing text would need

Re: Inserting half-column figure in text

2018-08-31 Thread Rich Shepard
a bunch of text and have it automagically flow out of the mini page when it reaches the end? To insert a half-page figure in the midst of existing text would need to have the minipage do the flowing around it. Glad you got both aligned the same way! I've futzed with this type of alignment issue, too

Re: Inserting half-column figure in text

2018-08-31 Thread Paul A. Rubin
On 08/30/2018 12:44 PM, Rich Shepard wrote: When I want to insert a small figure (half-column width) with text on the other half column, my first thought would be to usepackage{\multicols} and shift into 2-column mode for the figure, then back to 1-column mode.   There should be a better way

Re: Figure layout messed up when exporting to latex and importing again

2018-08-31 Thread Jürgen Spitzmüller
Am Freitag, den 31.08.2018, 14:57 +0200 schrieb Uwe Thuemmel: > I often go back and force between LyX and LaTeX. Unfortunately, > exporting from LyX to LaTeX (pdflatex) and importing again into LyX > messes up the layout of (sub)figures. > More particularly, I'd like subfigures to appear side by

Re: Figure layout messed up when exporting to latex and importing again

2018-08-31 Thread Scott Kostyshak
Hi Uwe, Thanks for writing in. Responses below. On Fri, Aug 31, 2018 at 02:57:04PM +0200, Uwe Thuemmel wrote: > I often go back and force between LyX and LaTeX. Unfortunately, exporting > from LyX to LaTeX (pdflatex) and importing again into LyX messes up the > layout of (sub)figures. We can

Figure layout messed up when exporting to latex and importing again

2018-08-31 Thread Uwe Thuemmel
I often go back and force between LyX and LaTeX. Unfortunately, exporting from LyX to LaTeX (pdflatex) and importing again into LyX messes up the layout of (sub)figures. More particularly, I'd like subfigures to appear side by side. In the original LyX file, this looks as follows, and in the

Inserting half-column figure in text

2018-08-30 Thread Rich Shepard
When I want to insert a small figure (half-column width) with text on the other half column, my first thought would be to usepackage{\multicols} and shift into 2-column mode for the figure, then back to 1-column mode. There should be a better way (perhaps with a frameless box?) yet I don't

Re: Figure captions

2018-06-09 Thread Ricardo Berlasso
2018-06-09 22:13 GMT+02:00 Steve Litt : > On Sat, 9 Jun 2018 12:43:47 +0200 > Ricardo Berlasso wrote: > > > 2018-06-09 11:50 GMT+02:00 F M Salter : > > > > > Hi > > > > > > Is it possible to place captioned figures side by side rather > > > than vertically? > > > > > > Yes, but you need to

Re: Figure captions

2018-06-09 Thread Steve Litt
On Sat, 9 Jun 2018 12:43:47 +0200 Ricardo Berlasso wrote: > 2018-06-09 11:50 GMT+02:00 F M Salter : > > > Hi > > > > Is it possible to place captioned figures side by side rather > > than vertically? > > > Yes, but you need to use the sidecap package. To integrate it on LyX > you can

Re: Figure captions

2018-06-09 Thread F M Salter
Thank both of you, Ricardo Berlasso  and Juergen Spitzmueller Frank Salter On 09/06/18 10:50, F M Salter wrote: > Hi > >     Is it possible to place captioned figures side by side rather than > vertically?   It is possible to place graphics, without captions, side > by side. 

Re: Figure captions

2018-06-09 Thread Jürgen Spitzmüller
p package. To integrate it on LyX > you can use a "Local format" There is also an unofficial module listed here, to the same effect: https://wiki.lyx.org/Layouts/Modules > > It is possible to place graphics, without captions, side > > by side. Figure captions see

Re: Figure captions

2018-06-09 Thread Ricardo Berlasso
mething like this (I'm using 2.3 here, for 2.2 use "Format 60" instead) Format 66 AddToPreamble \usepackage{sidecap} % added by sidecap.module \let\SCfigurename\figurename EndPreamble Float Type SCfigure GuiName "Figure (side caption)" Placement tbp Extension loscf N

Figure captions

2018-06-09 Thread F M Salter
Hi     Is it possible to place captioned figures side by side rather than vertically?   It is possible to place graphics, without captions, side by side.  Figure captions seem only to be used in floats.  Attempts to copy to a  box produces senseless! Regards Frank Salter

Re: Increase space for Figure number

2018-05-26 Thread Wolfgang Engelmann
t;engelm...@uni-tuebingen.de <mailto:engelm...@uni-tuebingen.de>>: How to increase the space for Figure number (see attachment)? The text class is sr-vorl (a Springer Publisher Vorlage -layout > https://ctan.org/pkg/sr-vorl?lang=de <https://ctan.org/pkg/sr-

Re: Increase space for Figure number

2018-05-26 Thread Ricardo Berlasso
2018-05-26 8:33 GMT+02:00 Wolfgang Engelmann <engelm...@uni-tuebingen.de>: > > > Am 25.05.2018 um 22:28 schrieb Ricardo Berlasso: > > 2018-05-25 9:34 GMT+02:00 Wolfgang Engelmann <engelm...@uni-tuebingen.de>: > >> How to increase the space for Figure number

Re: Increase space for Figure number

2018-05-26 Thread Wolfgang Engelmann
Am 25.05.2018 um 22:28 schrieb Ricardo Berlasso: 2018-05-25 9:34 GMT+02:00 Wolfgang Engelmann <engelm...@uni-tuebingen.de <mailto:engelm...@uni-tuebingen.de>>: How to increase the space for Figure number (see attachment)? The text class is sr-vorl (a Springer Publi

Re: Increase space for Figure number

2018-05-25 Thread Ricardo Berlasso
2018-05-25 9:34 GMT+02:00 Wolfgang Engelmann <engelm...@uni-tuebingen.de>: > How to increase the space for Figure number (see attachment)? The text > class is sr-vorl (a Springer Publisher Vorlage -layout > > https://ctan.org/pkg/sr-vorl?lang=de). > You need to "patc

Increase space for Figure number

2018-05-25 Thread Wolfgang Engelmann
How to increase the space for Figure number (see attachment)? The text class is sr-vorl (a Springer Publisher Vorlage -layout > https://ctan.org/pkg/sr-vorl?lang=de). Wolfgang

Re: how to scale a xfig figure in lyx?

2018-04-21 Thread Jürgen Spitzmüller
Am Samstag, den 21.04.2018, 08:48 +0200 schrieb Wolfgang Engelmann: > it turned out that I did not have the fig file in my folder. I was > mislead by the correct figure name shown in the lyx file. In the case > of > 'normal' figures lyx informs the user, that the file is

Re: how to scale a xfig figure in lyx?

2018-04-21 Thread Wolfgang Engelmann
to the begin: This is not the complete output. Post all console output when starting LyX from a terminal and trying to compile your document. Jürgen Jürgen, it turned out that I did not have the fig file in my folder. I was mislead by the correct figure name shown in the lyx file. In the case

Re: how to scale a xfig figure in lyx?

2018-04-20 Thread Jürgen Spitzmüller
Am Freitag, den 20.04.2018, 15:22 +0200 schrieb Wolfgang Engelmann: > Jürgen, I have listed infos from the terminal output which might have > a clue for you, but did not find any converter claims. I started from > the end of the output and went up to the begin: This is not the complete output.

Re: how to scale a xfig figure in lyx?

2018-04-20 Thread Wolfgang Engelmann
or to proceed, or enter new name. (Default extension: pdftex_t) Enter file name: ! Emergency stop. I can't view it even if I select 'show output anyway'. I have to produce the pdftex_t file which I do -as mentioned before- in xfig by 'export the xfig figure as combined PDF/LaTeX (both parts

Re: how to scale a xfig figure in lyx?

2018-04-20 Thread Wolfgang Engelmann
extension: pdftex_t) Enter file name: ! Emergency stop. I can't view it even if I select 'show output anyway'. I have to produce the pdftex_t file which I do -as mentioned before- in xfig by 'export the xfig figure as combined PDF/LaTeX (both parts)'. Do you get any error messages oin

Re: how to scale a xfig figure in lyx?

2018-04-20 Thread Jürgen Spitzmüller
extension: pdftex_t) > Enter file name: > ! Emergency stop. > > > I can't view it even if I select 'show output anyway'. I have to > produce the pdftex_t file which I do -as mentioned before- in xfig by > 'export the xfig figure as combined PDF/LaTeX (both pa

Re: how to scale a xfig figure in lyx?

2018-04-19 Thread Wolfgang Engelmann
, third pane ("Size and Rotation"), where I entered the size as "80 Textwidth %". ok, got it now. Why you insert the figure a second time as a PDF is beyond me. I sent a wrong lyx-file, the second fig should have been omitted. Jürgen Wolfgang The file you corre

Re: how to scale a xfig figure in lyx?

2018-04-19 Thread Jürgen Spitzmüller
xtwidth %". Why you insert the figure a second time as a PDF is beyond me. Jürgen > Wolfgang > xfig.lyx Description: application/lyx

Re: how to scale a xfig figure in lyx?

2018-04-19 Thread Wolfgang Engelmann
Am 19.04.2018 um 15:51 schrieb Jürgen Spitzmüller: 2018-04-19 14:58 GMT+02:00 Wolfgang Engelmann <engelm...@uni-tuebingen.de <mailto:engelm...@uni-tuebingen.de>>: Thanks, Jürgen, I think one mistake I made was, not to export the xfig figure as combined PDF/LaTeX

Re: how to scale a xfig figure in lyx?

2018-04-19 Thread Jürgen Spitzmüller
2018-04-19 14:58 GMT+02:00 Wolfgang Engelmann <engelm...@uni-tuebingen.de>: > Thanks, Jürgen, > I think one mistake I made was, not to export the xfig figure as combined > PDF/LaTeX (both parts), which I now did. In the Lyx:Graphics window I > clicked Scale graphics (%) and

Re: how to scale a xfig figure in lyx?

2018-04-19 Thread Wolfgang Engelmann
t scale a x.fig figure in a float figure which I inserted as > file >  > external material > xfig figure. It is shown too large in the pdf > output, whatever textwidth I insert. You can put it in the Scalebox inset (from the Graphic Boxes module). Having said tha

Re: how to scale a xfig figure in lyx?

2018-04-19 Thread Wolfgang Engelmann
Am 19.04.2018 um 10:04 schrieb Jürgen Spitzmüller: 2018-04-19 8:56 GMT+02:00 Jürgen Spitzmüller <sp...@lyx.org <mailto:sp...@lyx.org>>: Am Mittwoch, den 18.04.2018, 20:26 +0200 schrieb Wolfgang Engelmann: > I can't scale a x.fig figure in a float figure which I inserte

Re: how to scale a xfig figure in lyx?

2018-04-19 Thread Jürgen Spitzmüller
2018-04-19 8:56 GMT+02:00 Jürgen Spitzmüller <sp...@lyx.org>: > Am Mittwoch, den 18.04.2018, 20:26 +0200 schrieb Wolfgang Engelmann: > > I can't scale a x.fig figure in a float figure which I inserted as > > file > > > external material > xfig figure. It is show

Re: how to scale a xfig figure in lyx?

2018-04-19 Thread Jürgen Spitzmüller
Am Mittwoch, den 18.04.2018, 20:26 +0200 schrieb Wolfgang Engelmann: > I can't scale a x.fig figure in a float figure which I inserted as > file > > external material > xfig figure. It is shown too large in the pdf > output, whatever textwidth I insert. You can put it in

how to scale a xfig figure in lyx?

2018-04-18 Thread Wolfgang Engelmann
I can't scale a x.fig figure in a float figure which I inserted as file > external material > xfig figure. It is shown too large in the pdf output, whatever textwidth I insert. Wolfgang

Re: figure numbering

2018-03-12 Thread Patrick Dupre
mail.com> > To: lyx-users@lists.lyx.org > Subject: Re: figure numbering > > On 03/12/2018 11:53 AM, Patrick Dupre wrote: > > Yes, > > > > I have no section. > > It is a 1.5 pages document, and I did not section it. > > > In Document > Modules

Re: figure numbering

2018-03-12 Thread Paul A. Rubin
On 03/12/2018 11:53 AM, Patrick Dupre wrote: Yes, I have no section. It is a 1.5 pages document, and I did not section it. In Document > Modules, do you by any chance have "Number Figures by Section" selected? I believe it is selected by default for some layouts. If so, just delete it from

RE: RE: figure numbering

2018-03-12 Thread Bernt Lie
I guess you have two choices (maybe more...): * Make the figure a *displayed* figure, not a *floating* figure. In that case, the figure will not have numbering -- but you cannot have caption either. * Number the section where the figure is places. I guess it is also possible to change

Re: RE: figure numbering

2018-03-12 Thread Patrick Dupre
PM > From: "Bernt Lie" <bernt@usn.no> > To: "Patrick Dupre" <pdu...@gmx.com>, lyx <lyx-users@lists.lyx.org> > Subject: RE: figure numbering > > Is figure placed in unnumbered section/chapter? It looks like the top-level > heading has not be

RE: figure numbering

2018-03-12 Thread Bernt Lie
Is figure placed in unnumbered section/chapter? It looks like the top-level heading has not been numbered. -B -Original Message- From: lyx-users@lists.lyx.org <lyx-users@lists.lyx.org> On Behalf Of Patrick Dupre Sent: Monday, March 12, 2018 16:39 To: lyx <lyx-users@list

figure numbering

2018-03-12 Thread Patrick Dupre
Hello, I have figure numbering appearing like 0.1 How can I avoid this artifact? Thank === Patrick DUPRÉ | | email: pdu...@gmx.com Laboratoire de Physico-Chimie de l'Atmosphère

Re: caption separate from figure

2018-01-02 Thread Ricardo Berlasso
2018-01-02 17:54 GMT+01:00 Wolfgang Engelmann <engelm...@uni-tuebingen.de>: > I have a large figure and would therefore like to have the caption > separate from the float figure. I did not find infos about it in > Help>embedded objects. Any idea how to do it? > Wolfgang &

caption separate from figure

2018-01-02 Thread Wolfgang Engelmann
I have a large figure and would therefore like to have the caption separate from the float figure. I did not find infos about it in Help>embedded objects. Any idea how to do it? Wolfgang

Re: Cannot get Externam Material: Inkscape figure to work

2017-11-03 Thread Jürgen Spitzmüller
Am Freitag, den 03.11.2017, 08:28 +0100 schrieb racoon: > The feature works in rc1 now. Great! Good. Thanks for confirming. > But there is no UI preference to set the scaling, right? Right. It seems to have been left out by purpose (there's an according comment in the xtemplate file), but it

Re: Cannot get Externam Material: Inkscape figure to work

2017-11-03 Thread racoon
The feature works in rc1 now. Great! But there is no UI preference to set the scaling, right? Daniel On 12.10.2017 15:01, Jürgen Spitzmüller wrote: 2017-10-12 14:49 GMT+02:00 racoon >: Thanks. Yes, its 2.3beta1 from the website. Unfortunately,

Re: Cannot get Externam Material: Inkscape figure to work

2017-10-12 Thread racoon
On 12.10.2017 16:01, Jürgen Spitzmüller wrote: 2017-10-12 14:49 GMT+02:00 racoon >: Thanks. Yes, its 2.3beta1 from the website. Unfortunately, there are no such lines in configre.py. Ah ... The simple reason is that the Windows fixes for the

Re: Cannot get Externam Material: Inkscape figure to work

2017-10-12 Thread Jürgen Spitzmüller
2017-10-12 14:49 GMT+02:00 racoon : > > Thanks. Yes, its 2.3beta1 from the website. Unfortunately, there are no > such lines in configre.py. > Ah ... The simple reason is that the Windows fixes for the Inkscape template went in after beta1 was released. So you will have to wait

Re: Cannot get Externam Material: Inkscape figure to work

2017-10-12 Thread racoon
On 12.10.2017 15:26, Jürgen Spitzmüller wrote: 2017-10-12 13:59 GMT+02:00 racoon: 14:59:07.641: checking for a FIG -> Image converter... 14:59:07.721: +checking for "fig2dev"...  no 14:59:07.722: checking for a TIFF -> PS converter... 14:59:07.733: +checking for "tiff2ps"...  no

  1   2   3   4   5   6   7   8   9   10   >