Order something from Amazon, they will deliver :-)-O
el
On 2024-01-19 04:46 , Rich Shepard wrote:
[...]
> Mea culpa! Six days stuck in the house because temps are below freezing and
> there was a half-inch of ice (under the freezing rain) everywhere and I
> blanked on that issue.
[...]
--
lyx-u
On Thu, 18 Jan 2024, Richard Kimberly Heck wrote:
I believe this is standard behavior for reports. There's no LyX option
that controls it, so far as I know. Using LaTeX, of course, you can do
anything you want.
Riki
Mea culpa! Six days stuck in the house because temps are below freezing and
t
On 1/18/24 18:57, Rich Shepard wrote:
I'm recreating, under a different name, the doc that crashed LyX when I
tried to compile it. Using the KOMA-Script report class (scrreport.)
Because the only options for section numering that work are none or
all I've
chosen to us all.
Chapter 1 has 3 fig
I'm recreating, under a different name, the doc that crashed LyX when I
tried to compile it. Using the KOMA-Script report class (scrreport.)
Because the only options for section numering that work are none or all I've
chosen to us all.
Chapter 1 has 3 figures; chapter 2 has 3 figures. In the pri
Am 30.06.23 um 05:09 schrieb Dan:
Both the LaTeX and pdf files are attached. (Ignore the text: it needs
a lot of work!)
This is a simple problem, I'm sure, but I just can't get it to render
right.
I have an article I'm adding an image to as a float and I have
attached a label to it.
Th
; To: lyx-users@lists.lyx.org
> Subject: Re: figure numbering
>
> On 03/12/2018 11:53 AM, Patrick Dupre wrote:
> > Yes,
> >
> > I have no section.
> > It is a 1.5 pages document, and I did not section it.
> >
> In Document > Modules, do you by any chance
On 03/12/2018 11:53 AM, Patrick Dupre wrote:
Yes,
I have no section.
It is a 1.5 pages document, and I did not section it.
In Document > Modules, do you by any chance have "Number Figures by
Section" selected? I believe it is selected by default for some layouts.
If so, just delete it from th
e: RE: figure numbering
Yes,
I have no section.
It is a 1.5 pages document, and I did not section it.
===
Patrick DUPRÉ | | email: pdu...@gmx.com
Laboratoire de Physico-Chimie de l'
18 at 4:44 PM
> From: "Bernt Lie"
> To: "Patrick Dupre" , lyx
> Subject: RE: figure numbering
>
> Is figure placed in unnumbered section/chapter? It looks like the top-level
> heading has not been numbered.
>
> -B
>
> -Original Message-
Is figure placed in unnumbered section/chapter? It looks like the top-level
heading has not been numbered.
-B
-Original Message-
From: lyx-users@lists.lyx.org On Behalf Of Patrick
Dupre
Sent: Monday, March 12, 2018 16:39
To: lyx
Subject: figure numbering
Hello,
I have figure
Hello,
I have figure numbering appearing like 0.1
How can I avoid this artifact?
Thank
===
Patrick DUPRÉ | | email: pdu...@gmx.com
Laboratoire de Physico-Chimie de l'Atmos
On 2011-11-22, Majid Rafiee wrote:
> I'm a newbie in lyx and I'm using lyx 2.0.0 in IEEEtran template. The
> figures number are like this: " Fig III. A " which means figure is in
> section III and subsection A. But I don't like this style and I have to
> change it to the normal one, like this: "Fi
: Tuesday, November 22, 2011 2:22 PM
To: lyx-users@lists.lyx.org
Subject: Figure numbering problem
Hi
I'm a newbie in lyx and I'm using lyx 2.0.0 in IEEEtran template. The figures
number are like this: " Fig III. A " which means figure is in section III and
subsection A. But I d
Hi
I'm a newbie in lyx and I'm using lyx 2.0.0 in IEEEtran template. The
figures number are like this: " Fig III. A " which means figure is in
section III and subsection A. But I don't like this style and I have to
change it to the normal one, like this: "Fig 1". would you help me please
to know h
Hi
I'm a newbie in lyx and I'm using lyx 2.0.0 in IEEEtran template. The
figures number are like this: " Fig III. A " which means figure is in
section III and subsection A. But I don't like this style and I have to
change it to the normal one, like this: "Fig 1". would you help me please
to know h
On 10/20/2010 10:37 AM, Bruce Pourciau wrote:
When you change the document class, say from Article(AMS) to Article,
shouldn't the modules associated with the first class disappear?
My vote would be no. If I add a theorem numbering module and then
switch between article and article (AMS) (or
On Oct 19, 2010, at 3:55 PM, Paul Rubin wrote:
Bruce Pourciau lawrence.edu> writes:
I've looked at the manuals, but cannot find the answer to this
question: Using the Article class with unnumbered headings and
subheadings -- it's a relatively short paper, so there's no need to
number the he
Am 19.10.2010 21:46, schrieb Bruce Pourciau:
I've looked at the manuals, but cannot find the answer to this question:
Using the Article class with unnumbered headings and subheadings -- it's
a relatively short paper, so there's no need to number the headings --
the figures come out numbered Figu
On Tue, Oct 19, 2010 at 9:46 PM, Bruce Pourciau
wrote:
> I've looked at the manuals, but cannot find the answer to this question:
> Using the Article class with unnumbered headings and subheadings -- it's a
> relatively short paper, so there's no need to number the headings -- the
> figures come o
Bruce Pourciau lawrence.edu> writes:
>
> I've looked at the manuals, but cannot find the answer to this
> question: Using the Article class with unnumbered headings and
> subheadings -- it's a relatively short paper, so there's no need to
> number the headings -- the figures come out numbe
I've looked at the manuals, but cannot find the answer to this
question: Using the Article class with unnumbered headings and
subheadings -- it's a relatively short paper, so there's no need to
number the headings -- the figures come out numbered Figure 0.1,
Figure 0.2, etc. Can I change t
le, and if so: what file is it and where do I put
> it so this works?
>
> If this is needed, I am running Ubuntu 8.04 and am using Lyx version 1.5.3
> --
> View this message in context:
> http://n2.nabble.com/Figure-Numbering-Error-tp2380764p2380764.html
> Sent from
ing Ubuntu 8.04 and am using Lyx version 1.5.3
--
View this message in context:
http://n2.nabble.com/Figure-Numbering-Error-tp2380764p2380764.html
Sent from the LyX - Users mailing list archive at Nabble.com.
On Wed, 6 Aug 2008, Stephen Buonopane wrote:
In the preamble...
\usepackage{remreset}
[EMAIL PROTECTED]
\renewcommand{\thefigure}{\arabic{figure}}
Ah, thank you, Stephen!
Rich
--
Richard B. Shepard, Ph.D. | IntegrityCredibility
Applied Ecosystem Services, Inc.
I'm fairly new to LyX only used it this past 6 months for my masters
thesis. I have not come across a way to have it sequentially
number all
figures in a document.
Zan,
I believe that you're correct, and that my memory is faulty.
Looking at my
book (published 2005 and written using Ly
On Wed, 6 Aug 2008, Zan wrote:
I'm fairly new to LyX only used it this past 6 months for my masters
thesis. I have not come across a way to have it sequentially number all
figures in a document.
Zan,
I believe that you're correct, and that my memory is faulty. Looking at my
book (published
On Wed, 6 Aug 2008, Zan wrote:
Chapter 1 has been designated in your document some where. Could you use
a document class without the chapter environment? Like article?
Zan,
This is a long document that is better presented as a report. Yes, it has
chapters. However, it seems to me that figu
Using version 1.1.5. Just added a float figure, and the default caption
label displays as "Figure 1: " with a box for the legend. The figure itself
is a pdf, so I use pdflatex to view the compiled document.
What's strange, and different from all the previous versions I've used, is
that the co
On 30.11.07, Dave Hewitt wrote:
> My uppermost level in the report is Section
...
> A related but less important concern is the numbering of Figures. Is it
> possible to alter the numbering within a chapter? Since all of my report is
> in a single "Chapter", the figures having numbers like Figu
On Nov 30, 2007 12:29 PM, Dave Hewitt <[EMAIL PROTECTED]> wrote:
>
> > > My uppermost level in the report is Section (Intro, Methods, Results,
> > > etc.), and I suppress numbering within the document. I can get the Section
> > > titles into the TOC with 'Addsec' environments, but I would also like
> My uppermost level in the report is Section (Intro, Methods, Results,
> etc.), and I suppress numbering within the document. I can get the Section
> titles into the TOC with 'Addsec' environments, but I would also like to
> get Subsection titles into the TOC. I did not find a way to do that. C
Dave Hewitt wrote:
> My uppermost level in the report is Section (Intro, Methods, Results,
> etc.), and I suppress numbering within the document. I can get the Section
> titles into the TOC with 'Addsec' environments, but I would also like to
> get Subsection titles into the TOC. I did not find a w
I checked the FAQ and documentation for Koma-script report, but came up
empty on one needed modification:
My uppermost level in the report is Section (Intro, Methods, Results,
etc.), and I suppress numbering within the document. I can get the Section
titles into the TOC with 'Addsec' environme
William Seager writes:
> Hi. I notice that when I start a new chapter, the figure
> number gets reset. I mean, the first figure in chapter
> 2 is "figure 1", no matter how many figures there were
> in chapter 1. I would rather have the figures numbered
> sequentially through the whole book.
>
>
Hi. I notice that when I start a new chapter, the figure
number gets reset. I mean, the first figure in chapter
2 is "figure 1", no matter how many figures there were
in chapter 1. I would rather have the figures numbered
sequentially through the whole book.
But I have no idea how to do this. Any
- Original Message -
From: "Uwe Stöhr" <[EMAIL PROTECTED]>
To: "Geoffrey Lloyd" <[EMAIL PROTECTED]>
Cc:
Sent: Monday, July 25, 2005 2:38 AM
Subject: Re: Figure numbering/labelling
Geoffrey Lloyd schrieb:
the figures are labelled
Figure 1: caption
Fi
Geoffrey Lloyd wrote:
Hi
Just had a paper accepted for publication and thanks to Lyx it was a breeze to
produce in the right way for the publisher. However the figures are labelled
Figure 1: caption
Figure 2: caption
etc
I need FIG. 1. Caption
Notice the colon has become a period.
At the
Geoffrey Lloyd schrieb:
the figures are labelled
Figure 1: caption
Figure 2: caption
etc
I need FIG. 1. Caption
Notice the colon has become a period.
At the moment I am using
\renewcommand{\figurename}{FIG.}
to change the Figure to FIG. and that is fine. How do I change the following
c
Hi
Just had a paper accepted for publication and thanks to Lyx it was a breeze to
produce in the right way for the publisher. However the figures are labelled
Figure 1: caption
Figure 2: caption
etc
I need FIG. 1. Caption
Notice the colon has become a period.
At the moment I am using
\ren
Hi!
You may take a look at this page:
http://www.iam.ubc.ca/~newbury/tex/numbering.html
Nicolás
Guillaume SANTINI wrote:
Hi,
I'm writing a book class document. I have Graphics and Tables inserted
in many sections and subsections. I use the following procedure to
insert my floating graphics
Guillaume SANTINI a ècrit:
I use the following procedure to
insert my floating graphics and table:
1/ Insert->Floats->Graphics (or Table)
2/ Then, in the caption, I change the text format to "standart" and use
the tex syntax: \caption[Title]{comments}
Why don't you use LyX's caption format?
Hi,
I'm writing a book class document. I have Graphics and Tables inserted
in many sections and subsections. I use the following procedure to
insert my floating graphics and table:
1/ Insert->Floats->Graphics (or Table)
2/ Then, in the caption, I change the text format to "standart" and use
t
Thanks to all for the suggestions. As most of you pointed out, I was
not letting lyx do its job of numbering the figures automatically. I
didn't really need to add a figure number, I just had to write a caption
after "Figure#:" and lyx would number the figure for me. I wasn't yet
sure what my ca
On Mon, Sep 27, 2004 at 10:21:23AM -0700, ashleigh smythe wrote:
> Hello lyx list members. I'm having a problem with the numbering of my
> figures. When I insert a figure float, lyx gives me "Figure#:" and I
> type in the next number in my series of figures. Then I insert my
> figure into the fl
ashleigh smythe wrote:
When I insert a figure float, lyx gives me "Figure#:" and I
type in the next number in my series of figures.
You misunderstood something. The char '#' stands for the number. The
number is set while exporting/viewing the document to/as PDF, EPS or DVI.
Imagine what would hap
On Sat, May 08, 2004 at 08:24:09PM +0200, Roland Schmitz wrote:
> [...] I think there's a lot to learn for me ...
An easy thing to start with would be quoting in mails. In the lyx
mailing lists (as well as in lots of other mailing lists and
newsgroups) it is common to cut down the mails one is res
I think there's a lot to learn for me ...
The same here. A nice thing of this list is that we try to help each
other and the spirit of community is really alive on the list.
Paul
Hi Paul,
that's it. I think there's a lot to learn for me ...
Thanx
Roland
>
> \usepackage{remreset}
>
> \makeatletter
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]@table}
> \makeatother
>
> I hope this helps you!
today i want to change the table numbering, like the figure numbering i want
starit forward numbering insted of "chapter wise" nubering. I tried to change
Paul Smith solution (take a look at the end of the mail) for figure numbering
into a solution for table numbering. Because i
Hi,
today i want to change the table numbering, like the figure numbering i want
starit forward numbering insted of "chapter wise" nubering. I tried to change
Paul Smith solution (take a look at the end of the mail) for figure numbering
into a solution for table numbering. Bec
Hi Paul,
thanx, that's the way of numbering my pictures i was looking for.
Am Donnerstag, 6. Mai 2004 23:48 schrieb Paul Smith:
> \usepackage{remreset}
>
> \makeatletter
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]@figure}
> \makeatother
>
--
Mit freundlichem GrussYours sincerely
Roland Sch
s and putting the rest into the
> "LaTeX-Vorspann" should do it -I think.
>
> Hope this helps
>
> -Kai-
>
> Am Don, 2004-05-06 um 21.55 schrieb Roland Schmitz:
> > Hi,
> >
> > how can i change the figure
and putting the rest into the
"LaTeX-Vorspann" should do it -I think.
Hope this helps
-Kai-
Am Don, 2004-05-06 um 21.55 schrieb Roland Schmitz:
> Hi,
>
> how can i change the figure numbering form "chapter number" . &q
how can i change the figure numbering form "chapter number" . "number of pic
in this capter" into a "strait" forward numbering where every picture get's
just a number.
Roland,
You can get what you are wanting if you add the following lines to the
preamble:
\
Hi,
how can i change the figure numbering form "chapter number" . "number of pic
in this capter" into a "strait" forward numbering where every picture get's
just a number.
--
Mit freundlichem GrussYours sincerely
Roland Schmitz
On Mon, Nov 25, 2002 at 12:40:15PM -0500, Stephen G. Buonopane wrote:
> I am trying to number my Figures continuously through an article-type
> document which has several numbered sections. The Figure captions are
> numbered correctly 1,2,3... But if I reference the figures in the text I get
> numb
I am trying to number my Figures continuously through an article-type
document which has several numbered sections. The Figure captions are
numbered correctly 1,2,3... But if I reference the figures in the text I get
numbers like 1.1,2.1,2.2 etc. where the first number is the section and the
second
Yvonne Becherini wrote:
> Hallo,
> I cannot understand why with LyX 1.1.6fix4 figure references are always like
> this "??".
there is a problem with your bibfile. Have a look at
view->logfile (near the end).
Herbert
--
http://www.lyx.org/help/
Hallo,
I cannot understand why with LyX 1.1.6fix4 figure references are always like
this "??".
Thank you
Yvonne
> The appendix is built-in in LaTeX but not yet supported by
> LyX, this is
> explaned in the user guide.
> Just put the LaTeX command \appendix before your first
> appendix chapter, and
> use chapter instead of chapter*, you will automatically have
> them numbered
> with letters.
Not exac
Le Jeudi 20 Septembre 2001 15:40, vous avez écrit :
> Hello All,
>
> I am writing my thesis using a class based on book.
>
> I have created an "appendix" at the back by using the environment Chapter*.
> The appendix is to contain a few figures in figure floats. I have cross
> referenced the figure
Hello All,
I am writing my thesis using a class based on book.
I have created an "appendix" at the back by using the environment Chapter*.
The appendix is to contain a few figures in figure floats. I have cross
referenced the figures earlier in the text.
My problem is that the figures in my "
On Fri, May 25, 2001 at 10:59:18AM +0100, Jonathan Ware wrote:
> Hello,
>
> Is it possible to label figures in lyx so that (for example) those under
> a paragraph heading are numbered <>-<>
> (e.g. 2.3.4.1-1), those under a subsection heading are numbered
> <>-<> (e.g. 2.3-2) and so on?
Yes. Use
athan Ware
cc:
Subject: figure
Hello,
Is it possible to label figures in lyx so that (for example) those under
a paragraph heading are numbered <>-<>
(e.g. 2.3.4.1-1), those under a subsection heading are numbered
<>-<> (e.g. 2.3-2) and so on?
Thanks in advance for any help.
Jonathan
* couldn't you use
*
* \begin{appendix}
* .. the text and anything else ...
* \end{appendix}
Couldn't I take a look at Lamport's before asking?
Thank you, this is what I needed.
Laurent DUVAL wrote:
>
> Hello
>
> I have added an annex to a document in the book-koma script style,
> using Addchapter.
>
> It appears unnumbered in the TOC, which is what I needed.
> But the figures belonging to the annex come out in the
> TOC with the last genuine chapter number.
couldn't
Hello
I have added an annex to a document in the book-koma script style,
using Addchapter.
It appears unnumbered in the TOC, which is what I needed.
But the figures belonging to the annex come out in the
TOC with the last genuine chapter number.
Does somebody have a way to overcome this feature
> "Leonid" == Leonid Belostotski <[EMAIL PROTECTED]> writes:
Leonid> Hello, It was probably discussed somewhere but I was not able
Leonid> to find it.
Leonid> For my thesis, each figure/table has to be numbered in the
Leonid> following fashion: Y-X, where Y is the chapter number and X is
Leo
Hello,
It was probably discussed somewhere but I was not able to find it.
For my thesis, each figure/table has to be numbered in the following
fashion: Y-X, where Y is the chapter number and X is the figure number in
the chapter. I need to be able to cross-reference to the table/figure and
the l
70 matches
Mail list logo
