you can buy R22 on ebay with free shipping for $500 for 30#
there are also often partially full bottles for less per lb
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
here's the beast i bought
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
FOLKS
I BOUGHT THE isuzu powered 26 foot safari trek for $1500
we dragged it off of the property with a chain and i got it running
it runs and drives well and i am living in it in red level al
i still need tires and need to get the charging system working and i need to
find a driver
like
Folks,
knock on wood, but my 83 300td has been performing flawlessly for the past month
mostly on grease, i've driven it
from athens, ga to tybee island 260 miles
from tybee to millen ga and back 180 miles
to new orleans and back to tybee probably 1700 miles including driving around
new
we sold and serviced bicycles before motor scooters (for about 20 years)
was it randy? call me about the raleigh bike, i love them the most
i can tell you what to do
706 540-3285 i can talk you through any repairs but the 3 speed sturmy-archer
rear hub … you need some diagrams and likely some
i clean tank with a pound or so of lye in cold water and then fill the tank and
let it sit for a week
i fill from the gauge hole … be sure to remove the fuel gauge
and fill till exactly full so you don't mess up the paint etc on the outside of
the tank
then rinse
or you can pressure wash it
Folks
i learned to drive in a 1951 plymouth and took my driving test in a 1966 Ford
Ranch Wagon with stick shift on the column and overdrive about 1970
Then i mostly drove air cooled VWs with a bad luck Audi 90 wagon and a few
american pickups thrown it, for the next 25 years. We even ran a VW
y'all all need this one
http://asheville.craigslist.org/hvd/5483672845.html
and what kind of ford is this one
http://athensga.craigslist.org/hvo/5491811976.html
euro ford??
i like it if it is diesel
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
the nissens we had was from denmark, i believe
not china as someone said
as in this website
http://www.nissens.com/
thanks,
xx rick
Rick Hawkins
\
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or
Folks
i bought one of the HF aluminum jacks probably 9 months ago
i'll bet i haven't used it 10 times …. last time i tried (moving some printing
presses), the jack would rise with a pump of the handle bit it would not stay
up … it went back down immediately
the raise/lower valve seems
or glue it with water weld
i patched several holes on mine a few years ago (82 300td) …. i hit a deer and
the fan chewed the radiator up in several places
i glued it up and ran it PRESSURIZED for at least a year until i found another
had VERY minimal leaking
or buy a nissens on ebay, often
i sell lots of stuff on ebay and on some new items i sometimes let amazon drop
ship for me ….. using a gift receipt so the price is not disclosed to the
customer
often amazon has a lower price than a traditional supplier
thanks,
xx rick
Rick Hawkins
___
I sent the motor home ebay listing to my german buddy here in athens. Here's
what he wrote:
Both Thomas and i knew Uschi Obermeier and Dieter Bockholt , he owned a bar
in HH that we frequented . At least we saw them come in and out when they where
prepping for their journey Anyway they
i'm curious about the snow reports
in athens, ga we only received about 1/4 of an inch of snow maybe 7 pm last
night
my father got about 2 inches in SC, just east of Augusta, GA (and south of us
here)
i spoke to someone in Greenwich Village NYC and he said it only looked like
about 8 inches
We rebuilt the turbo on my 1982 300td.
I bought a cheap kit somewhere …. amazon maybe or ebay and we followed some
online videos
They are fairly hard to take apart. You need to be very careful. I used a lot
of soaking in 50/50 acetone & ATF to loosen bolts. Hard to clean (we used
ultrasonic
i have some 123 cars and i'd say they are pretty loud …. and i do adjust valves
and mess with injectors from time to time
i think i may have an exhaust leak …. maybe another failed flex pipe, from the
turbo to the pipe …. on my main 300td
i replaced it with a used part a few years ago
i need
Well in athens, ga the temp was down to about 24F last night. My 300td had 100%
wvo in it and i was able to start it at about 42F around lunchtime. I'm sure
the fuel was still colder. This evening i bought 5 gals of diesel for $2.09, at
a local shop. It can probably be found for $1.95 or less
https://savannah.craigslist.org/search/sss?sort=rel=mercedes%20300td
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
you know that if you have a friend with a paid amazon prime, they can give away
one of two prime memberships ….. they don't include the video services but do
give the prime shipping
i have a rich friend in san francisco who shares it with me
thanks,
xx rick
Rick Hawkins
tell me your birth date / time / location and sun sign and i'll sell you a
horoscope for $11
think how much you can save over the H Freight model
thanks,
xx rick
Rick Hawkins
www.javaphoto.com
www.javacycles.com
LETTERPRESSES FOR SALE
www.ricktheprinter.com
www.letterpressmachinery.com
Folks
yellow grease HAS a current price …. friday in the midwest it was about 18.5
cents a lb (about $1.41/gallon)
a year ago it was about 27 cents a lb
I was talking to someone about buying 1100 gallons from me at $1/gal just to
scare up some cash
thanks,
xx rick
Rick Hawkins
Folks,
as a christmas (or hanukkah which is ongoing now) or kwanza or new year gift,
i have the rare 25% off harbor freight coupon
email me directly and i will email it to you
it was emailed to me from HF so that should work fine
it's only good for a few days, so you'll have to shop between
This is interesting
http://www.nytimes.com/2015/12/06/us/b-52s-us-air-force-bombers.html?mwrsm=Facebook
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery
impressive
i would fly it although it is lacking in redundancy
https://www.youtube.com/watch?v=PDcpwhhUFAo
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery
http://athensga.craigslist.org/cto/5304441173.html
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
maybe we need to change the name of the list to the okiebenz film scanning &
letterpress list?
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
folks
i use nikon 4000 scanners for 35mm negs (firewire interface) and actually have
good luck scanning 120 negs with an epson v500 flatbed scanner (usb) with
backlight
mostly using vuescan (on macs)
i am generally making highest possible res (read HUGE FILES) which i then print
on a 17 inch
4aRe: 1987 300 TD wagon for sale
Sat Nov 21, 2015 4:56 pm (PST) . Posted by:"Jerome Kimberlin" jkimberln
I know it is bad form to reply to my own email, but I've received no
interest whatsoever from anyone about this car. It appears that no one
wants it so it's going off to be sold as scrap
folks
amoco white gas as sold in SC and georgia in the 60's and 70's was high test
and lead free
i always ran it in coleman stoves without problems
here's what wikipedia says:
American Oil chose to continue marketing its premium-grade "Amoco-Gas" (later
Amoco Super-Premium) as a lead-free
walmart has it
http://www.walmart.com/ip/37547928?wmlspartner=wlpa=227025807150==g=c=52400709735==pla=79486368615=sem
probably a small bottle
same on ebay
Someone asked:
what kind of job needs a sawzall?
just about anything that needs to be cut
i've trimmed a 300td exhaust pipe with a sawzall and i cut an 1895 house in
half with one about 20 years ago (we were moving the house). I just followed a
board down the hall …. seriously ! We but it
Folks
the library on tybee island lends a kill a watt meter
maybe many libraries have them? i don't know
or you can buy one
it looks like there are a lot of them now available cheaply
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps=kill+a+watt=i%3Aaps%2Ck%3Akill+a+watt
here's a good liberal article that says why we should have single payer health
insurance
http://www.salon.com/2015/06/26/americas_health_care_system_is_still_broken_why_single_payer_is_the_only_thing_that_will_ever_fix_it/
most western countries can manage it
Canada, UK, France, Portugal,
folks,
> http://seattle.craigslist.org/kit/cto/5280895560.html
that's a good looking truck …. but a bit large for my taste ….i'm guessing it's
a 22 or 24 foot body and probably at least 20,000 GVW? i'll bet it takes some
fuel.
I also haul presses in a 1992 isuzu NPR (running on WVO). The
i forgot to mention … i had a 2,000 lb lift gate installed on the back of my
isuzu
the gate is the folding tuck under style but it is REALLY TRICKY to use with a
press
it is EASY to flip a machine off of the gate. I haven't done it but i am really
careful what i do with the gate
on the
the tulsa limousine is almost as nice as the one we have here in georgia
100k miles, more or less
http://atlanta.craigslist.org/eat/cto/5263022270.html
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives
did y'all understand that we HAVE the limo that's for sale in athens. It's in
my field and i assume it's some californic conversion
i can't imagine using it as a press hauler …. if you cut the roof it would
really have no strength but it IS a cool image (with the jib crane, of course)
i think
Folks
I have a lot of lead as in several tons of Linotype metal (4% Tin, 12% Antimony
and 84% Lead)
It is in the form of standing type forms (strips of type) and is clean and
ready to melt to make sinkers or bullets. I think the bullet people like the
hardness of the alloy.
I have mostly
Folks
123 power windows do fail
I've probably replaced 3 driver's side regulators on my 1982 300td over maybe
12 or 14 years
Granted, the 2 replacements were also used units
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list
just came down the street and were banging on cars and knocking trash cans over
i looked out and watched them bust the driver's window of my benz
i yelled at them and chased them off down the street
i think it was white kids maybe even a guy and a girl
i was going to call the cops but couldn't
Folks
we had a spare driver's glass in our boneyard, so after lots of vacuuming of
glass
fortunately it wasn't even in a door, so i just grabbed it
once at home so i could drive to the office and again when i had the door
opened up, i installed the new piece
it goes up and down with only a
i didn't call the cops because no one needed to get shot offer broken glass
neither me not the perps if they could even be identified
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To
just came down the street and were banging on cars and knocking trash cans over
i looked out and watched them bust the driver's window of my benz
i yelled at them and chased them off down the street
i think it was white kids maybe even a guy and a girl
i was going to call the cops but couldn't
So, i found a meter and the Uro voltage regulator is charging correctly
And so, i shouldn't use a $6 Uro voltage regulator because it is no good and a
german Bosch regulator failed and cooked my battery?
I see there is a Hueco brand …. who is that?
says made in germany
Folks
So i did some inspection on the dead battery when it didn't respond to charging
overbite
The top side was blown out on the positive side.
A check with a meter indicated that i was charging at about 16+ volts
I grabbed my trusty Uro voltage regulator from the glove box and installed it
Folks
i've been out testing the 82 300TD AC and car.
I replaced the r4 compressor again about 2 weeks ago.
Last week i dragged a 1500 lb printing press to Tupelo, MS from athens, ga
relatively uneventfully. As i left there i had no vacuum or boost on the
brakes. Fortunately, the trailer was
Folks
i could be persuaded to go down to florida in say jan feb march…. try to plan
it not on spring break holiday times, i guess
i'm considering getting a vintage early 90's RV … specifically an isuzu npr
chassis Safari Trek 1991 isuzu chassis and 1992 model trek. The one i'm working
on has
Folks,
i did a stupid thing but it;s fixed now.
After the r4 ac compressor blew its housing a month ago, i had to fix it. I
bought a compressor on amazon and a receiver drier on ebay or somewhere and
found some more straight mineral oil and assorted seals and orings and etc.
I went to my ac
Andrew
i've speculated about blackness in the sls oil
i have it but don't worry about it
the black could also come from the deteriorated hose
you can change the seal on the back of the sls pump
i have one that i've never gotten around to doing (out of the car) and have
been running a pump
someone wrote
http://www.eeuroparts.com/Parts/54627/A-C-Compressor-490F100/
that compressor looks just like the 4 seasons that slipped the sleeve on me
See the tab in the rear in that bends over to retain the steel cover ….. that
was bent out straight on mine
i pushed the sleeve back on mine
this is the part number for the one i bought
http://www.summitracing.com/parts/fss-58228
and the one i bought had mercedes as the correct application
i think the business about SPECIAL MERCEDES COMPRESSER is an old wive's tale
unless someone can show me some good documentation
remember it
Folks
my perfect running 3 month old R4 compressor failed today.
AC had been running for maybe 2 minutes and i was going probably 10 mph.
Outside air temp about 90f. As i started off i heard and explosion POW and i
assumed i had had a blowout, then i saw a puff of oil smoke come out from
wilton
they should NEVER have filled a tank they thought was leaking
tag the tank as leaking valve and swap it at the walmart for $18
they don't care and don't fill them, they just ship them back somewhere
if you tag it you are doing your job
i swapped out all my old found tanks that don't
The sprinter folks have a problem with glow plugs getting stuck in the heads …
maybe aluminum heads?
So i think the rule is if you can get a glow plug OUT replace it.
I read a sprinter list and there seems to be no end of complicated problems
with those vehicles.
thanks,
xx rick
Rick Hawkins
Folks
I've been working on selling a couple of TONS of Linotype type lead (lead,
antimony tin alloy) which seems to be desirable for bullet casting.
I've been getting $2/lb plus usps flat rate shipping charges and i am probably
selling 100 lbs a month.
i'm surprised that is sells so high.
Folks,
I few weeks ago dragged a letterpress down to our place on tybee island and
cleaned it up and printed a few business cards on it. Some kids called me from
St Augustine Beach and were looking for a press. I told them to come see me on
Tybee. They drove up to Tybee and tested the machine
not mine
http://jacksonville.craigslist.org/cto/5113380404.html
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
Folks
i have a 5 cylinder air cooled deutz engine in an Iveco 1981 Z100 (pantechnicon
body)
i bought it in 1991 and used it for about 20 years. I put a clutch in it but
that was about all … a VERY trouble free engine
It's loud and probably 18 to 22 mpg in that truck
I sold it about 2 years
Folks,
this reg is new to me
It is possible that occasionally you may not use a truck
in commerce at all. You may be moving your personal
belongings to a new house or, as a hobby, you may be taking
your horses to a horse show. As long as the activity is not
in support of
Folks
i know a fair bit about the DOT
it'squite complicated, sort of like the FAA (the dot is not happy until you
are not happy)
to drive my isuzu npr (about 12,000 gross) i have to have a dot number and a
dot program
i have to have a dot medical (like the faa) every 2 years …. $45 at a
and i have some rusty wagons
300td etc
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
I also need the window brushes (L and R) that scrape dew/rain water off the
windows. OEM costs $75 vs. $12 for a knockoff. Seems like quite a
spread. Is itworth the difference?
i would put a new cheap one on and see how long it lasts
just try one and watch it
i doubt if the oem lasts 6
i'm selling a bunch of these for a friend
you bolt them to a jacked up powered car wheel with the tire off and run the
car to split
THEY ARE CRAZY MAN!!
look for stickler and youtube videos
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To
folks,
i asked one of the b-52's about the tin roof, rusted …. we'll see what he says
( i messaged him)
i had never even thought about it meaning more than the obvious rusty tin roof
of the love shack
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
OK
here's what keith from b-52's remembers about the line in the song
Hey!
You know, that was Cindy's line and as far as I know it came about simply
because we were jamming and I suddenly stopped the tape of music and Cindy
continued her line, Tin roof rusted! She never mentioned it being
is the list working?
i don't seem to be getting anything (in digest)
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
This video is almost exactly how my operation is …. except we run WVO
thanks,
xx rick
Rick Hawkins
On May 16, 2015, at 4:40 PM, mercedes-requ...@okiebenz.com wrote:
From: Kaleb C. Striplin ka...@striplin.net
Subject: [MBZ] Biodiesel anyone?
Date: May 16, 2015 10:46:49 AM EDT
To: Mercedes
there are lots of variations on nook chargers on ebay from about $2 in china to
maybe $8 here
search nook charger
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change
i think the nitrogen cells can be shipped, but just not by AIR, supposedly
they have come ground from autohausaz and from someone i bought them from on
ebay
thanks,
xx rick
Rick Hawkins
www.javaphoto.com
www.javacycles.com
LETTERPRESSES FOR SALE
www.ricktheprinter.com
here's a cheap pod
http://www.ebay.com/itm/A-C-VACUUM-ELEMENT-FOR-MERCEDES-123-800-31-75-Behr-/181401650571?hash=item2a3c61858bvxp=mtr
thanks,
xx rick
Rick Hawkins
www.javaphoto.com
www.javacycles.com
LETTERPRESSES FOR SALE
www.ricktheprinter.com
www.letterpressmachinery.com
buy a used diesel kubota as someone posted to the list
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
Folks
i'll be happy to trade 2 or 3 rusty project 300 TD cars for a pious insight or
leaf
i'd love to have one to play with
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or
So, we removed the frozen compressor (new 4 seasons ago or less)
We flushed about half the system with printing blanket/roller wash and blew it
out
we added about 8 oz of mineral oil to the compressor and the new drier
We installed a new $152 ebay compressor and the amazon $11.50 drier (Behr
I don't do all that much mowing, fortunately. I have a honda powered self
propelled push mower that is ok …. i bought it for $75 in SAV.
As for a lawn tractor, i'd go with a $1000 or $1500 kubota diesel mower … altho
i know few specifics, i know lots of mini farmers with kubota stuff and they
i seem to be back on the list
thanks
xx rick
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
got this address from someone who was selling parts on ebay
now only from his own site, he says
http://benzbonz.biz/store/
lots of used parts
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
here is some of what may be available
http://www.cci-ammunition.com/products/pestcontrol_specialty.aspx
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery
this is my friend Monika, a singer from Brooklyn
https://www.youtube.com/watch?v=oMiESiT4yI0
the video was shot in her red maybe 1983 300d turbo which she often runs on WVO
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives
http://atlanta.craigslist.org/eat/cto/4912896586.html
we have too many cars
massive 123 sell off of mostly rusty cars
some are mine and some belong to friends
thanks,
xx rick
Rick Hawkins
www.javaphoto.com
www.javacycles.com
LETTERPRESSES FOR SALE
www.ricktheprinter.com
it's not all that nice, but since you lust after the 1985 ones so you need to
buy it
the engine seems to run well considering it was out of fuel
we added a gal of diesel and i pumped the primer but didn't bleed it and we got
it started with a decent battery (ours) at about 34 F
it seemed
Image 2
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
All posts are the result of individual
Folks
bought a lovely 300td 1985 today very cheaply
i sent a small photo to the list, but my pix never seem to get thru
anyway, it's a rust free new york car HA HA
it even has a busted off sway bar end
it hadn't been run for a year or more … and was out of fuel
we added a gallon of diesel
Folks
about the overheating 240d
did you ever do a citric acid cleanse?
they all have a lot of crud in the cooling system
then i'd replace radiator and then water pump assuming the thermostat tests
good in boiling water
thanks,
xx rick
Rick Hawkins
___
On Feb 19, 2015, at 3:23 PM, Rick Hawkins Java via Mercedes
mercedes@okiebenz.com wrote:
Folks
about the overheating 240d
did you ever do a citric acid cleanse?
they all have a lot of crud in the cooling system
then i'd replace radiator and then water pump assuming
P1040694
P1040696
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
All posts are the result of
I don't think the pumps run on a rheostat
here's a rebuild tutorial
http://www.instructables.com/id/Rebuilding-an-ULKA-Vibratory-Pump-Espresso-machin/
i've never had luck at repairing them
here's another set of links
http://ulkapumprepair.blogspot.com/
the ulna is the one in the machines i
http://atlanta.craigslist.org/nat/cto/4798187002.html
there seem to be a lot of them
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://asheville.craigslist.org/cto/4849353885.html
with the dreaded WVO conversion, but a good system for that
pretty cheap and low miles
i'd say average condition 123 cars are really pretty cheap at this point in the
southeast
thanks,
xx rick
Rick Hawkins
saw this in atlanta
http://greenville.craigslist.org/cto/4867853530.html
or i guess it's in greenville, sc
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery
slushbox
http://atlanta.craigslist.org/wat/cto/4797833797.html
cheap
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://athensga.craigslist.org/cto/4874243628.html
another 123 right here in athens
i just don't need any
thanks,
xx rick
Rick Hawkins
\
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery
Folks
I have come onto many interesting cars. When i was about 15 or 16 i bought a
Renault 4CV (looks like a morris minor with suicide doors in the front) that
was sitting behind a house in Aiken SC.
I got the title and the car showed only about 20,000 miles.
I paid $20. I STILL have the car
=50LH_SALE_CURRENCY=0_from=R14%7CR40_sacat=0_nkw=renault+dauphineLH_PrefLoc=3_sop=3rt=nc
On Mon, Feb 2, 2015 at 1:43 PM, Rick Hawkins Java via Mercedes
mercedes@okiebenz.com wrote:
Folks
I have come onto many interesting cars. When i was about 15 or 16 i bought a
Renault 4CV (looks like
Folks
I used to use my used cessna oil from a C-150 in some of my peugeots …. it
would only have 25 hours on it.
thanks,
xx rick
Rick Hawkins
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change
Folks
The first car i ever drove was about a 1945 jeep out in the mountains of
Colorado. I learned to drive mostly on a 1951 plymouth which my father bought
new and i still have in the field. MY first car was a 1962 VW bus. I bought it
for $50 and rebuilt the engine myself. I got stuck with
here's one on ebay
http://www.ebay.com/itm/Mercedes-Turn-Signal-Wiper-Cruise-Control-Switch-Arm-R107-W116-W123-W460-/291365913207?pt=Motors_Car_Truck_Parts_Accessoriesfits=Model%3A300Dhash=item43d6c30277vxp=mtr
thanks,
xx rick
Rick Hawkins
___
is this the part that all the discussion is about?
seems cheap enough on ebay, twenty bux delivered
what do the teeth do on it? do i have this on an 82 300td?
Folks
i need the transmission to transmission cooler (radiator) line on the passenger
side RIGHT for my 1982 300td …. i think the part is the same on a 300d for a
number of years
i think it is part number 123 270 4796
anyone got a good used one
mine is not well supported and has rubbed
1 - 100 of 128 matches
Mail list logo