Hello,
I am pretty new to OpenBSD and not sure if I should report minor issue to
bugs@, but I just found that vgafb(4) device is supported only on macppc
and sparc64 (according to src/sys). It has nothing to do with i386 nor with
amd64.
But for some reason it's man page sits directly in
Hello all,
Also upgraded the ERL to 6.3, dmesg to follow.
Secondary DNS server, backup router, and experiment box.
OpenBSD 6.3 (GENERIC.MP) #0: Sun Mar 25 19:59:39 UTC 2018
visa@octeon:/usr/src/sys/arch/octeon/compile/GENERIC.MP
real mem = 536870912 (512MB)
avail mem = 523862016 (499MB)
Hello all,
Upgraded my apu2 to 6.3 tonight, here is the requisite dmesg.
This machine is my network's DHCP server and primary DNS server.
OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1996152832
On Fri, Apr 13, 2018 at 11:05:06AM -0700, jungle Boogie wrote:
> On 13 April 2018 at 09:39, Jonathan Gray wrote:
> > On Fri, Apr 13, 2018 at 09:19:23AM -0700, jungle Boogie wrote:
> >> On 13 April 2018 at 08:30, jungle Boogie wrote:
> >> > Hi All,
> >> >
Dear OpenBSD awesome community,
I tryed to find some information on block device encryption topic,
specifically about best practices in using it and did find some. But there
is not much I could find about what happens when my actual device contents
starting to consume more space than initially
Hi Daniel,
On Wed, 4 Apr 2018 03:22:04 -0300
Daniel Bolgheroni wrote:
> Hi,
>
> audio is stuttering on media playback when run through sndiod. It's OK
> without it.
Maybe related. Yesterday I disabled webcam and microphone in BIOS on
my X250. Then Video playback (audio
On 13 April 2018 at 11:05, jungle Boogie wrote:
>
> Thanks for the reply. I think I'm closer, but there still seems to be
> some gaps...
It's working now! I had taken a shortcut earlier. At the installer
prompt, I incorrectly selected upgrade to take a shortcut. Now
Before working with OpenBSD, I thought archlinux had good documenation, (
the wiki ). On OpenBSD I rarely need more things than the man pages, the
ports PKG docs and tailing the logfiles. But I can understand that
sometimes it feels good for short term benefits to be able to use an up and
running
On Thu, Apr 12, 2018 at 10:19:23PM -0500, Juan Morado wrote:
> Hi all,
>
> I searched the mail archives briefly but couldn't find a related issue.
> Apologies if this is a duplicate.
>
> Since upgrading to OpenBSD 6.3 on my amd64 laptop, it has been crashing
> whenever I touch the track pad.
>
On 13 April 2018 at 09:39, Jonathan Gray wrote:
> On Fri, Apr 13, 2018 at 09:19:23AM -0700, jungle Boogie wrote:
>> On 13 April 2018 at 08:30, jungle Boogie wrote:
>> > Hi All,
>> >
>> > So between Peter Hessler's post here:
>> >
On 13.04.2018 18:54, Edmund Craske wrote:
> On Fri, Apr 13, 2018, at 9:31 AM, Stuart Henderson wrote:
>> Can you show your whole hostname.pppoe0 file? (mask your password of
>> course). On Zen I'm using the following
>>
>> mtu 1500
>> inet 0.0.0.0 255.255.255.255 0.0.0.1 pppoedev em1 authproto
On Fri, Apr 13, 2018, at 9:31 AM, Stuart Henderson wrote:
> Can you show your whole hostname.pppoe0 file? (mask your password of
> course). On Zen I'm using the following
>
> mtu 1500
> inet 0.0.0.0 255.255.255.255 0.0.0.1 pppoedev em1 authproto chap
> authname "XXX@zen" authkey "XXX" up
>
On 2018-04-13, Joel Wirāmu Pauling wrote:
> Can they do 14MPPS aka 10GBIT ?
> That's what I am looking for in pretty much in anything I would vaguely
> consider to replace the n3160's I have as my target devices at the moment.
Not sure the current max performance but I think
On Fri, Apr 13, 2018 at 09:19:23AM -0700, jungle Boogie wrote:
> On 13 April 2018 at 08:30, jungle Boogie wrote:
> > Hi All,
> >
> > So between Peter Hessler's post here:
> > https://bsd.network/@phessler/99389809617980837
> >
> > And the install instructions for arm64:
>
On 2018-04-13, Edmund Craske wrote:
> Hi,
> I've just replaced my old OpenBSD 5.x-running router with a new one (Alix
> APU2) running 6.3.
>
> Having copied over my old configuration and modified it where necessary, I've
> got it bringing up my connections fine, IPv4 works,
On 13 April 2018 at 08:30, jungle Boogie wrote:
> Hi All,
>
> So between Peter Hessler's post here:
> https://bsd.network/@phessler/99389809617980837
>
> And the install instructions for arm64:
> https://ftp.openbsd.org/pub/OpenBSD/snapshots/arm64/INSTALL.arm64
>
> I have
I only use the following in the .xinitrc file to start Xfce: xfce4-session
Best regards
Freddy
On Friday, 13 April 2018 12:38:36 CEST, Olivier REGNIER wrote:
Hi,
After xfce was installed, I used the xinitrc file found in
/usr/local/share/examples/xfce4-session.
It is very complete.
Xfce
Hi All,
So between Peter Hessler's post here:
https://bsd.network/@phessler/99389809617980837
And the install instructions for arm64:
https://ftp.openbsd.org/pub/OpenBSD/snapshots/arm64/INSTALL.arm64
I have the pine64-lts:
https://www.pine64.org/?page_id=46823
Booting to the installer, but the
Hi,
So, does xfce4-session start with out of console kit or does not start at
all?
Do you use display manager or startx?
Note that .xinitrc is used only by xinit (startx), not by xenodm/xdm.
ck-launch-session is part of ConsoleKit, do you have it installed?
On Fri, Apr 13, 2018 at 1:38 PM,
Hi Carlos,
HAproxy project exists and serves much better as load balancer and reverse
proxy server. It is more efficient than engine X. Any concerns using it?
- Bogdan
On Fri, Apr 13, 2018 at 04:47 Pavel Korovin wrote:
> Hi Carlos,
>
> There's no analog of proxy_pass in
Hello,
Sorry for this silly question, but is consolekit installed ?
Additionally, how do you start your X session ? Using a login manager
(xenodm ?), or from the console using `startx` ?
The script below requires the variable `XFCE4_SESSION_WITH_CK` is set to
`1` to run the session through
Hi Carlos,
There's no analog of proxy_pass in httpd(8). relayd(8) is your friend.
On 04/13, C. L. Martinez wrote:
> I am trying to migrate nginx configuration to OpenBSD's httpd. All it is
> working ok, except for some proxy reverse config that I use with nginx's
> config, like for example:
>
Hi,
After xfce was installed, I used the xinitrc file found in
/usr/local/share/examples/xfce4-session.
It is very complete.
Xfce runs but ck-launch-session is not executed.
Here is the script related to ck-launch-session:
# run xfce4-session if installed
if which xfce4-session /dev/null
Hi all,
I am trying to migrate nginx configuration to OpenBSD's httpd. All it is
working ok, except for some proxy reverse config that I use with nginx's
config, like for example:
server {
listen 80;
server_name internal.w01.domain.org;
location / {
proxy_pass
On 09:30 Fri 13 Apr, Boudewijn Dijkstra wrote:
> The point is not to go to court, the point is to bully people into
> paying up.
Well, this reminds me of Nigerian Emails. Have someone actually payed
them? Cause seriously, you can just reply them with a goatse picture
attached. Even goatse has
Hi,
I've just replaced my old OpenBSD 5.x-running router with a new one (Alix APU2)
running 6.3.
Having copied over my old configuration and modified it where necessary, I've
got it bringing up my connections fine, IPv4 works, but IPv6 does not, without
having to manually add a default route
Op Thu, 12 Apr 2018 15:47:18 +0200 schreef Consus :
On 08:28 Thu 12 Apr, Nick Holland wrote:
Another "failure mode" of VirtualBox people should be aware of:
I understand through good sources, Oracle monitors the IP addresses that
it's downloaded from, and if they can trace it
Op Thu, 12 Apr 2018 14:28:14 +0200 schreef Nick Holland
:
Another "failure mode" of VirtualBox people should be aware of:
I understand through good sources, Oracle monitors the IP addresses that
it's downloaded from, and if they can trace it back to a commercial IP
On 04/12/18 23:13, Joel Carnat wrote:
>> Le 12 avr. 2018 à 21:10, Stuart Henderson a écrit :
>>
>> On 2018-04-12, Joel Carnat > wrote:
>>> Hi,
>>>
>>> I want net-snmpd to run a script via the extend directive.
>>> This script has to
29 matches
Mail list logo