On 4/20/23 17:12, Katherine Mcmillan wrote:
According to ChatGPT, unfortunately, it doesn't work on plants.
Me to ChatGPT: Can I run OpenBSD on my ficus?
ChatGPT: No, it is not possible to run OpenBSD on a ficus plant. OpenBSD is an
operating system designed to run on computer hardware, not
On 4/12/23 20:20, Theo de Raadt wrote:
Stuart Henderson wrote:
On 2023-04-11, Theo de Raadt wrote:
Kaya Saman wrote:
This somehow is overriding my resolv.conf file; another words the
information is *not* being used from resolv.conf and is instead being
used from the ipcp negotiation as
Thanks Stu, and everyone else who responded :-)
On 4/11/23 09:01, Stuart Henderson wrote:
On 2023-04-10, Kaya Saman wrote:
On 4/10/23 16:24, Daniele B. wrote:
Apr 10, 2023 12:52:22 Kaya Saman :
how do I override OpenBSD's
behavior to explicitly not use the dns servers obtained th
On 4/10/23 16:24, Daniele B. wrote:
Apr 10, 2023 12:52:22 Kaya Saman :
how do I override OpenBSD's
behavior to explicitly not use the dns servers obtained through ipcp but
instead use the ones form the resolv.conf file?
My solution both for security reasons (I'm using unboun
On 4/10/23 11:40, Jonathan Gray wrote:
On Mon, Apr 10, 2023 at 11:26:22AM +0100, Kaya Saman wrote:
Hi,
I'll ask the second question first as it might be easier to implement...
Currently I have found that the dns servers specified in the resolv.conf
file are not being used. Inste
Hi,
I'll ask the second question first as it might be easier to implement...
Currently I have found that the dns servers specified in the resolv.conf
file are not being used. Instead my machine is prioritizing the ISP
obtained servers from the ipcp protocol through the kernel ppp service.
W
On 4/3/23 11:25, Claudio Jeker wrote:
On Mon, Apr 03, 2023 at 10:53:26AM +0100, Kaya Saman wrote:
Hey guys,
...
Taking an excerpt from the website I was following:
https://www.packetmischief.ca/2011/09/20/virtualizing-the-openbsd-routing-table/
Citing:
Creating a loopback interface in
Hey guys,
I can't spend too much time right now in writing up what I have done
right now as I'm just about to head out of town to a local nature
reserve in order to clear my head, but basically things are working!!
At this stage with such limited documentation on the topic I wonder if I
sh
Well... somehow I managed to get inter rdomain forwarding.
I have no idea how...?
I think things started to work when I changed this statement in PF:
block log on rdomain 0 from "block log"
Right now I can only communicate between rdomain 2 and rdomain 0.
I moved my ISP-B interface o
Hi guys,
So far I have spent a week on this and I feel like I'm not progressing,
now I just feel like I'm banging against a brick wall.
To start with, I managed to send icmp echos over my WAN link through
ISP-B within the same routing domain rdomain 2.
I then started looking at inter-Rdo
On 3/28/23 17:27, Stuart Henderson wrote:
On 2023-03-28, Kaya Saman wrote:
Anyway, what I am trying to figure out is how to NAT the rdomain's?
At the moment from what I understand one has to put "rtable (n)" at the
end of the NAT rule...
That is for _changing_ rtable; if
On 3/28/23 17:27, Stuart Henderson wrote:
On 2023-03-28, Kaya Saman wrote:
Anyway, what I am trying to figure out is how to NAT the rdomain's?
At the moment from what I understand one has to put "rtable (n)" at the
end of the NAT rule...
That is for _changing_ rtable; if
On 3/28/23 17:27, Stuart Henderson wrote:
On 2023-03-28, Kaya Saman wrote:
Anyway, what I am trying to figure out is how to NAT the rdomain's?
At the moment from what I understand one has to put "rtable (n)" at the
end of the NAT rule...
That is for _changing_ rtable; if
Thanks Stuart!
On 3/28/23 16:19, Stuart Henderson wrote:
On 2023-03-28, Kaya Saman wrote:
On my WAN vlan for what I am going to call ISP-B, as ISP-A is existing
for a long time. What I'm trying to do right now is set this as a
default gateway for a particular subnet.
There's no suc
Hi again,
so my shiny new fiber has been installed yesterday and currently I can
ping the gateway IP address but not much more.
It was interesting as they gave me this whole subnet and told me I get a
gateway address. What they should have said to eliminate my confusion
was that there is a
On 3/25/23 09:33, Stuart Henderson wrote:
On 2023-03-24, Kaya Saman wrote:
Just responding to this for completeness as I have some more information
on my side
On 3/24/23 07:21, Stuart Henderson wrote:
On 2023-03-23, Kaya Saman wrote:
Unfortunately I haven't been well for a long
Just responding to this for completeness as I have some more information
on my side
On 3/24/23 07:21, Stuart Henderson wrote:
On 2023-03-23, Kaya Saman wrote:
Unfortunately I haven't been well for a long time hence the delay in
upgrade and at first found it a little difficult but th
Hi everyone,
it's been a long time since I've posted here and in the meantime I have
just upgraded from 7.0-current to 7.3-beta through sysupgrade which is
amazing! Thanks so much for all the hard work and effort put in to the
tool!!
Unfortunately I haven't been well for a long time hence
Thanks Stuart!
On 1/26/21 11:36 AM, Stuart Henderson wrote:
On 2021-01-25, Kaya Saman wrote:
Thanks a lot Tom for your response.
Perhaps I wasn't quite clear in what I am trying to achieve?
When I say trunk, I meant from a switch perspective as in a 802.1Q trunk
port on a switch
all the best
On Mon, 25 Jan 2021 at 22:06, Kaya Saman <mailto:kayasa...@gmail.com>> wrote:
Hi,
I'm wondering if it's possible to get OpenBSD to make the NIC
ports act
like a layer 2 switch?
I made a quick test in VirtualBox (unfortunately I don'
Hi,
I'm wondering if it's possible to get OpenBSD to make the NIC ports act
like a layer 2 switch?
I made a quick test in VirtualBox (unfortunately I don't have any bare
bones systems free to test with) and tried the following:
create two systems, one called router , the other called cli
On 6/24/20 11:58 AM, Stuart Henderson wrote:
On 2020-06-23, Daniel Ouellet wrote:
Have a look through https://www.supermicro.com/en/products/embedded/servers /
https://www.supermicro.com/en/products/embedded/rackmount and you'll find
quite a few things that give the perception "solid custom net
only at what you get compare to
other better choices.
I am not doing it for best performance, but for fell comfortable.
Call it marketing bullshit, because that's exactly what it is! (;
Daniel
On 6/23/20 12:37 PM, Kaya Saman wrote:
Hi, I totally understand the position you're in and
Hi, I totally understand the position you're in and sympathize.
I've never heard of Cisco routers being able to run OpenBSD though IOS
is based on BSD as far as I'm aware.
Not a direct solution to your use case but you could always run a
small mini-itx or SBC system behind the Cisco router. You c
Hi,
I just updated my system from 6.6 (old current) to 6.7 (current) which
went through fine.
I realized that the npppd setup I had stopped working. Something that
threw me off in the man pages was the lingering reference to the old tun
interface which has since been reworked to pppac.
m
On 5/10/20 2:12 PM, Kaya Saman wrote:
On 5/10/20 2:04 PM, Tom Smyth wrote:
Hello Clarence,
you would need to provide some more information about your setup,
ip addresses on interfaces , what is your pf.conf etc...
In your experia ( I believe they are android)
you can download the hurricane
On 5/10/20 2:04 PM, Tom Smyth wrote:
Hello Clarence,
you would need to provide some more information about your setup,
ip addresses on interfaces , what is your pf.conf etc...
In your experia ( I believe they are android)
you can download the hurricane electric network tools (HE network
tool
It really depends on what you want/need.
If you would like to host your own DNS servers, then multi location is a
good idea:
Example: Master NS1 in LA and Slave NS2 in Miami.
I have no idea about GoDiddy but my US based domain hosting company
let's me specify my own ns servers, as their D
On 11/30/18 8:31 PM, Chris Bennett wrote:
I'm just curious. Is there a default method to select on this? Random?
Can I control this somehow?
It's clear how everything else selects IP, but I just wanted to know in
case that ever mattered, say one of my IPs were blocked.
And I wanted to be sure w
On 11/20/18 8:11 PM, Chris Bennett wrote:
On Tue, Nov 20, 2018 at 02:24:55PM -0500, Nick Holland wrote:
On 11/20/18 11:43, Chris Bennett wrote:
Unfortunately, if you have performance requirements, your choices are
AMD and Intel. Older Intel and AMD chips aren't getting any support to
deal wi
On 10/1/18 4:36 PM, Claudio Jeker wrote:
On Mon, Oct 01, 2018 at 04:16:48PM +0100, Kaya Saman wrote:
On 10/1/18 4:12 PM, Janne Johansson wrote:
Den mån 1 okt. 2018 kl 16:56 skrev Kaya Saman mailto:kayasa...@gmail.com>>:
Hi,
I've got an issue where something strange i
On 10/1/18 4:36 PM, Claudio Jeker wrote:
On Mon, Oct 01, 2018 at 04:16:48PM +0100, Kaya Saman wrote:
On 10/1/18 4:12 PM, Janne Johansson wrote:
Den mån 1 okt. 2018 kl 16:56 skrev Kaya Saman mailto:kayasa...@gmail.com>>:
Hi,
I've got an issue where something strange i
On 10/1/18 4:12 PM, Janne Johansson wrote:
Den mån 1 okt. 2018 kl 16:56 skrev Kaya Saman <mailto:kayasa...@gmail.com>>:
Hi,
I've got an issue where something strange is happening with the
routing
table after establishing an ipsec connection it&#
Hi,
I've got an issue where something strange is happening with the routing
table after establishing an ipsec connection it's quite hard to
describe but what happens is that the tunnel establishes then routing
goes down completely. The netstat -r command when run on the router just
hangs
e Roundcube and Rainloop work well enough and still
are actively maintained. I do not know how well those other ones you
listed work.
Alternatively, direct your users to some clear and well-written
instructions that would allow them to configure a mail client of their
choice.
Best wishes,
Duncan
On 09/08
On 9/9/18 5:54 PM, Ken M wrote:
On Sun, Sep 09, 2018 at 05:49:31PM +0100, Stuart Henderson wrote:
In a nutshell, monitoring email is concentrating on what is really
likely to be one of the less problematic areas. The others, which IMO
are MUCH more likely to be involved if any problems do occu
On 9/9/18 5:42 PM, Ken M wrote:
On Sun, Sep 09, 2018 at 11:24:38AM -0500, Ed Ahlsen-Girard wrote:
While you should not take technical advice on mail servers from me,
I've raised two kids to adulthood with a 17 year old to go, and had
almost 200 foster children.
The impedance mismatch you have
On 9/8/18 6:01 PM, Chris Bennett wrote:
[snip]
IMHO, I would skip using partially insecure OS's like Linux. These are
your kids!
Of course security at the OS level is important but also a lot of work
must be done around in the infrastructure area too for security...
running a good IDS for
I agree here!
Basically you would need a few components:
MTA / MDA / MUA
https://en.wikipedia.org/wiki/Message_transfer_agent
One way to do it would be something like: Postfix / Courier IMAP / Then
bolt something like SquirrelMail on top for web UI client
There are many ways to achieve
I couldn't say for the compatibility with OpenBSD though I have read
other people running on them, but how about Lenovo??
I've got an X220 which I run a Linux distro on which I'm really happy
with though the i7 CPU does seem to overheat for some reason, though I
seem to have this issue with a
Hi Jordan,
I ask this a while back too and many thanks to Stuart Henderson who
might chime in? Basically the queuing is done on the outbound interface.
So when you make your rules if you have 15Mbs upstream bandwidth then
that is where you do the queuing. See the OBSD and PF manual for how
On 02/15/18 07:48, Glenn Faustino wrote:
After deleting and installing pfstat it now works, thanks guys!
Feb 15 14:26:37 OpenBSD pkg_delete: Removed pfstat-2.5p1
Feb 15 14:27:02 OpenBSD pkg_add: Added pfstat-2.5p1
$ doas pfstat -q -d /var/db/pfstat.db
$
Regards,
Glenn
Hi,
I'm experiencin
On 02/15/2018 01:34 PM, Stuart Henderson wrote:
On 2018/02/15 13:27, Kaya Saman wrote:
On 02/15/2018 12:13 PM, Stuart Henderson wrote:
On 2018-02-15, Kaya Saman wrote:
does queueing still function with pfstat? As far as I'm aware it still
uses the old altq method which has long
On 02/15/2018 12:13 PM, Stuart Henderson wrote:
On 2018-02-15, Kaya Saman wrote:
does queueing still function with pfstat? As far as I'm aware it still
uses the old altq method which has long been abandoned.
you're correct, pfstat hasn't been updated to follow changes in PF
Hi,
does queueing still function with pfstat? As far as I'm aware it still
uses the old altq method which has long been abandoned.
It would be great if pfstat would graph queues again but the config
example in: /usr/local/share/examples/pfstat/pfstat.conf still has the
old altq style?
W
On 02/15/2018 06:39 AM, Glenn Faustino wrote:
On Thu, Feb 15, 2018 at 1:48 PM, Sebastien Marie wrote:
On Thu, Feb 15, 2018 at 12:29:23AM +, Stuart Henderson wrote:
On 2018-02-14, Glenn Faustino wrote:
Hi,
Did you upgrade your packages after upgrading to -current? Can you
share your /
Hi,
I've got the Dansguardian port installed and it still seems to be part
of the packages list too. https://ftp.openbsd.org/pub/OpenBSD/6.1/packa
ges/amd64/
However, I think that the actual software isn't maintained anymore as
it's original home: http://dansguardian.org/ has vanished.
There is
On 07/27/2017 05:30 PM, Stuart Henderson wrote:
On 2017-07-26, Kaya Saman wrote:
[snip]
I'm finding that I don't really need much in the way of "downstream"
queueing though. It might be needed in special cases but using mikeb's
shiny new fq-codel code in -
[snip]
I'm finding that I don't really need much in the way of "downstream"
queueing though. It might be needed in special cases but using mikeb's
shiny new fq-codel code in -current, one single queue definition on the
upstream interface is keeping traffic flowing nicely.
queue hfsq-em1 on em1
Many thanks Stuart!
On 07/26/2017 11:37 AM, Stuart Henderson wrote:
On 2017-07-25, Kaya Saman wrote:
My goal is to use a different queue for up/down were I can change the
max bandwidth accordingly.
Queuing is done outbound, your "in" queues actually need to be on the
outbound
Hi,
I'm trying to setup packet queueing on a WAN interface with 80Mb/s
downstream bandwidth and 20Mb/s upstream bandwidth.
The first point of call of course is the PF manual:
https://man.openbsd.org/pf.conf.5
Then had a look to see what others had issues with and solutions suggested:
ht
On 07/07/2017 10:11 PM, Allan Streib wrote:
Kaya Saman writes:
I'm running current (6.1 GENERIC.MP#99 amd64) and keep getting this
message when trying to start ntp from @ports:
ntpd 4.2.8p10@1.3728-o Fri Jun 2 02:18:56 UTC 2017 (1): Starting
mlockall(): Cannot allocate memory
fata
On 07/08/2017 12:11 AM, Christian Weisgerber wrote:
On 2017-07-07, Kaya Saman wrote:
I'm running current (6.1 GENERIC.MP#99 amd64) and keep getting this
message when trying to start ntp from @ports:
ntpd 4.2.8p10@1.3728-o Fri Jun 2 02:18:56 UTC 2017 (1): Starting
mlockall(): C
Hi,
found this posting back from 2013 and wondering if there was ever a
commit on the proposed patch?
http://openbsd-archive.7691.n7.nabble.com/PATCH-mlockall-problem-in-OpenBSD-5-2-td166000.html
I'm running current (6.1 GENERIC.MP#99 amd64) and keep getting this
message when trying to sta
FTP
servers are
required to support the PASV command by RFC 1123, some do
not.)
Or simply attempt to use Active ftp on port 20 - though this seems to be
now legacy....
---K
On 01/29/2017 04:14 PM, Kaya Saman wrote:
Hi,
as I have now managed to get back in
Hi,
as I have now managed to get back into my OBSD system I have tested ftp
again from clients yet still even with the recent upgrade I seem to be
unable to list certain directories??
I have checked the option flags for ftpproxy (man ftpproxy) however,
couldn't find anything of help.
An
On 12/04/2014 04:28 PM, Ted Unangst wrote:
On Thu, Dec 04, 2014 at 12:29, Kaya Saman wrote:
On 12/03/2014 07:39 PM, Christian Weisgerber wrote:
On 2014-12-03, Josh Grosse wrote:
This could be the bug fixed in src/sbin/isakmpd/ui.c rev 1.56.
Check your system logs for "isakmpd: back
On 12/03/2014 07:39 PM, Christian Weisgerber wrote:
> On 2014-12-03, Josh Grosse wrote:
>
>>> This could be the bug fixed in src/sbin/isakmpd/ui.c rev 1.56.
>>> Check your system logs for "isakmpd: backwards memcpy".
>> It may not be that change, since it was only committed two days ago.
>> I've
>
Hi,
for some reason, this seems to have been for a while now; isakmpd will
simply quit running after initiating: ipsecctl -f /etc/ipsec.conf
Starting isakmpd manually with flags -Kdv doesn't give any indication as
to what might be causing the service to crash or segfault and nothing is
reporte
On 09/17/2014 03:34 PM, Alexander Hall wrote:
On September 17, 2014 4:08:48 PM CEST, Kaya Saman wrote:
Ok, so this is just a quick follow up.
Squid started dying too, checking the logs showed "not enough file
descriptors".
After looking at both /etc/login.conf "openfiles-cur&
On 09/17/2014 03:32 PM, Stefan Olsson wrote:
Date: Wed, 17 Sep 2014 15:08:48 +0100
From: kayasa...@gmail.com
Just a quick observation, not sure if by design or other but ulimit
doesn't seem to have a man page?
-It is a ksh builtin.
man ksh
-It would be
man: no entry for ulimit in the manual.
Though I did find a copy here:
http://ss64.com/bash/ulimit.html
:-)
So thanks Philip, looks like you saved my day twice!
Regards,
Kaya
On 09/17/2014 03:55 AM, Philip Guenther wrote:
> On Tue, Sep 16, 2014 at 4:27 PM, Kaya Saman wrote:
>&
On 09/17/2014 03:55 AM, Philip Guenther wrote:
On Tue, Sep 16, 2014 at 4:27 PM, Kaya Saman wrote:
I'm not sure what happened but after updating OpenBSD today, then
updating the installed packages Dansguardian seems to not be working.
...
The only error in the logs that I can s
Hi,
I'm not sure what happened but after updating OpenBSD today, then
updating the installed packages Dansguardian seems to not be working.
My OpenBSD version is: 5.6 GENERIC.MP#376 amd64
as stated just been updated today.
then used: pkg_add -vui
to update the packages.
Just checking one
On 04/25/2014 11:32 AM, Stuart Henderson wrote:
[...]
About separate adsl router I think they are pretty unsafe and very easy
download the firmware from the vendor site, hack it and flash the
device. And all the home adsl router u can find are linux based with
all security problems that linux ha
On 04/20/2014 03:56 PM, Stuart Henderson wrote:
On 2014/04/20 15:49, Kaya Saman wrote:
On 04/20/2014 03:16 PM, Stuart Henderson wrote:
On 2014/04/20 15:11, Kaya Saman wrote:
On 04/20/2014 11:52 AM, Stuart Henderson wrote:
On 2014-04-19, Kaya Saman wrote:
I hope someone can help me with
On 04/20/2014 03:16 PM, Stuart Henderson wrote:
On 2014/04/20 15:11, Kaya Saman wrote:
On 04/20/2014 11:52 AM, Stuart Henderson wrote:
On 2014-04-19, Kaya Saman wrote:
I hope someone can help me with this...
For some reason my fans are spinning up at 3000RPM and making a lot of
noise. I
On 04/20/2014 03:16 PM, Stuart Henderson wrote:
> On 2014/04/20 15:11, Kaya Saman wrote:
>> On 04/20/2014 11:52 AM, Stuart Henderson wrote:
>>> On 2014-04-19, Kaya Saman wrote:
>>>> I hope someone can help me with this...
>>>>
>>>> For some
On 04/20/2014 11:52 AM, Stuart Henderson wrote:
On 2014-04-19, Kaya Saman wrote:
I hope someone can help me with this...
For some reason my fans are spinning up at 3000RPM and making a lot of
noise. I have a similar chassis m/b combo running FreeBSD 10 which runs
almost silent.
The processor
Hi,
I hope someone can help me with this...
For some reason my fans are spinning up at 3000RPM and making a lot of
noise. I have a similar chassis m/b combo running FreeBSD 10 which runs
almost silent.
The processor usage on this machine isn't very high at all and is even
being throttle
Hi,
I'm wondering if anyone has had any experience with VPN and Android 4.4??
I used to use OpenVPN with versions 4.1 through 4.3 however, 4.4
apparently broke the tun interface so the app doesn't work now.
As I need vpn access I configured ipsec and npppd however, I keep
getting these errors
On 08/10/2013 06:01 PM, Francisco Valladolid H. wrote:
> On Sat, Aug 10, 2013 at 2:51 AM, Maurice Janssen wrote:
>> On 08/09/13 17:05, Francisco Valladolid H. wrote:
>>> Hi folks.
>>>
>>> Currently I have a Wireless network serving in my town using a small
>>> form factor (mini-itx) PC with OpenBS
On 11/01/2012 11:12 PM, Sevan / Venture37 wrote:
On 31/10/2012 18:49, Kaya Saman wrote:
I've just got my dsl line reprovisioned for Annex M compatibility and
the line speed showing currently on the modem is 20Mbps downstream with
2Mbps upstream.
Upon the reprovisioning I got ask to do a
Hi,
I've just got my dsl line reprovisioned for Annex M compatibility and
the line speed showing currently on the modem is 20Mbps downstream with
2Mbps upstream.
Upon the reprovisioning I got ask to do a speed test by my ISP and only
~>5Mbps was shown for downstream while upstream was shown
I think this is what you might be looking for:
http://www.rocksolidelectronics.com/pages/products.php
Not sure where you are based but if in Europe then Linitx can help
you is in the UK however.
http://linitx.com/viewcategory.php?catid=148
Regards,
Kaya
On Mon, Jun 25, 2012 at 9:47 AM,
On 03/12/2012 11:21 AM, Stuart Henderson wrote:
On 2012-03-11, Kaya Saman wrote:
Well in mean time I found this:
http://openports.se/devel/metaauto
although I don't think it's installed as **find** didn't come up with
anything.
pkg_info | grep metaauto
Also look at locat
On 03/12/2012 10:50 AM, Stuart Henderson wrote:
On 2012-03-11, Kaya Saman wrote:
Now I do know these without even needing to read the documentation...
however even **IF** I tried to compile on one of those platforms which I
do all the time I never need to adjust system variables or tell
On 03/12/2012 09:59 AM, Peter Hessler wrote:
On 2012 Mar 12 (Mon) at 00:44:15 + (+), Kaya Saman wrote:
:Would it not just be easier and cleaner to create a new list for
:newbies? That way the more advanced stuff could be taken care of on
:this list and only people willing to help others
On 03/12/2012 12:21 AM, hex wrote:
On Sun, Mar 11, 2012 at 10:48:24PM +, Kaya Saman wrote:
On 03/11/2012 10:34 PM, Ted Unangst wrote:
On Sun, Mar 11, 2012, Kaya Saman wrote:
try: automake --version
autoconf --version
The messages should be self-explanatory if you didn't d
On 03/11/2012 10:34 PM, Ted Unangst wrote:
On Sun, Mar 11, 2012, Kaya Saman wrote:
try: automake --version
autoconf --version
The messages should be self-explanatory if you didn't define certain
environment variables, e.g., I have this in my environment:
automake --version
aut
On 03/11/2012 08:20 PM, Marc Espie wrote:
On Sun, Mar 11, 2012 at 07:42:43PM +, Kaya Saman wrote:
Hi,
I'm trying to compile the latest NTOP version 4.1.0 on OpenBSD
RELEASE 5.0 x64 but am running into issues regarding automake and
autoconfig.
Basically I installed:
automake-1.1
On 03/11/2012 08:20 PM, Marc Espie wrote:
On Sun, Mar 11, 2012 at 07:42:43PM +, Kaya Saman wrote:
Hi,
I'm trying to compile the latest NTOP version 4.1.0 on OpenBSD
RELEASE 5.0 x64 but am running into issues regarding automake and
autoconfig.
Basically I installed:
automake-1.1
On 03/11/2012 08:20 PM, Marc Espie wrote:
On Sun, Mar 11, 2012 at 07:42:43PM +, Kaya Saman wrote:
Hi,
I'm trying to compile the latest NTOP version 4.1.0 on OpenBSD
RELEASE 5.0 x64 but am running into issues regarding automake and
autoconfig.
Basically I installed:
automake-1.1
On 03/11/2012 08:10 PM, Remco wrote:
Kaya Saman wrote:
Hi,
I'm trying to compile the latest NTOP version 4.1.0 on OpenBSD RELEASE
5.0 x64 but am running into issues regarding automake and autoconfig.
Basically I installed:
automake-1.11.1p2
autoconf-2.67
The install script com
Hi,
I'm trying to compile the latest NTOP version 4.1.0 on OpenBSD RELEASE
5.0 x64 but am running into issues regarding automake and autoconfig.
Basically I installed:
automake-1.11.1p2
autoconf-2.67
The install script comes up saying this:
# ./autogen.sh
Starting ntop automatic config
On 03/10/2012 01:33 PM, 0xAAA wrote:
It is quite interesting that any trolling message gets more attention than a
real, OpenBSD related problem (view the threads of the stupid guy which cant
read installation instructions...)
It could be just that people need to let off steam once in a
On 03/10/2012 08:27 AM, Lars wrote:
Kaya Saman wrote:
On 03/09/2012 10:35 PM, Ingo Schwarze wrote:
Brett wrote on Sat, Mar 10, 2012 at 09:12:11AM +1100:
I noticed and think its a great title, because it would never be
approved by a marketing department.
See, Nick *is* the honorary marketing
On 03/09/2012 10:35 PM, Ingo Schwarze wrote:
Brett wrote on Sat, Mar 10, 2012 at 09:12:11AM +1100:
I noticed and think its a great title, because it would never be
approved by a marketing department.
See, Nick *is* the honorary marketing department.
Er... well... among other functions.
(He is
Hi,
I am trying to create a VPN between my OpenBSD test box running in a
Virtual Box instance, with bridged interface to my NIC and my Cisco 857
router.
I am getting these error messages in /var/log/messages:
Mar 5 21:24:31 OpenBSD isakmpd[27722]: dropped message from 192.168.0.1
por
Hi,
I created a virtual instance of OpenBSD 5.0 x64 RELEASE edition using
VirtualBox and set it up to be used as router/gateway with NAT.
Taking this:
http://www.openbsd.org/faq/pf/example1.html
as an example for practically getting to know packet filter which I've
never used before and get m
On 02/28/2012 01:57 PM, Stuart Henderson wrote:
I also would like to know if anyone knows of any ADSL2+ Annex M standard
PCI (/x/) based modem card that I can use to connect to my ISP with
instead of using an external device?
So far in my search I came across this:
http://linitx.com/viewcategor
With this though I'm betting that a Core2Quad Q8400s CPU (which I currently
run on a FreeBSD based Mini-NAS mainframe) will be more powerful then any
Cisco SMB based router? - I can see it being more powerful then my 8xx or
18xx series in anycase!
I don't know cisco, it's all about how much data
So I would like to build a router out of a Quad Core Xeon system. I've
selected the hardware for it already and the software barring the base OS.
You want the highest cache and highest frequency cpu you can find.
MP will not help you with routing performance at all.
Something like this:
h
Good luck
Many thanks Christiano for such a quick and comprehensive response :-)
Regards,
Kaya
Hi,
this is my first posting here :-)
I have currently only used OpenBSD as a test vector setup on VirtualBox
and 2x Sun Fire V240's as a DNS server (master/slave) using Bind9. So
basically in short am an OpenBSD newbee :-)
Ok so here goes;
I've been using FreeBSD for around 3+ years now an
95 matches
Mail list logo
