On Mon, Feb 05, 2018 at 11:07:18AM +, Kevin Chadwick wrote:
> On Mon, 5 Feb 2018 11:21:27 +0100
> > However, I can still reproduce device timeouts easily by running
> > tcpbench through an AR9271 in hostap mode. I don't know yet what's
> > causing the problem.
>
> (Not using these for producti
On Mon, 5 Feb 2018 11:21:27 +0100
> However, I can still reproduce device timeouts easily by running
> tcpbench through an AR9271 in hostap mode. I don't know yet what's
> causing the problem.
(Not using these for production btw)
I have unplugged my AR9271 due to these timeouts. Due to the chro
On Sat, Jan 27, 2018 at 12:59:12PM +0300, Denis wrote:
> I would like to add some test conditions to a previous post.
>
> AR9271 USB stick's antenna line of sight to AP antenna ~10m.
>
> It that case I usually receive
>
> athn0: device timeout
You might have bett
I would like to add some test conditions to a previous post.
AR9271 USB stick's antenna line of sight to AP antenna ~10m.
It that case I usually receive
athn0: device timeout
As man(4) athn diagnostic message shows. 'A frame dispatched to the
hardware for transmission did not comple
Encountered the same errors with AR9271 dongle (athn driver) as in
previous posts:
athn0: firmware command 0x17 timed out
athn0: firmware command 0x18 timed out
athn0 device timeout
Kernel determined it as:
athn0 at uhub1 port 4 configuration 1 interface 0 "ATHEROS USB2.0 WLAN" rev
On Sun, Oct 15, 2017 at 12:38:56AM -0500, Ax0n wrote:
> Frequently -- several times per hour when I'm actively doing stuff on my
> laptop, the network hangs for perhaps 30-60 seconds. This coincides with
> athn0 timeout messages on the console. I don't have much data to back up my
> claim that it f
sibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: SCSI0 0/direct
removable serial.0bda013851638820
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (7c4cada893c18112.a) swap on sd0b dump on sd0b
athn0: device timeout
error: [drm:pid26667:intel_pipe_update_start] *ERROR* Potential atomic
update failure on pipe A
athn0: device timeout
athn0: device timeout
athn0: device timeout
athn0: device timeout
athn0: device timeout
athn0: device timeout
On Wed, Jan 25, 2017 at 07:48:18PM +1000, Martin Pieuchot wrote:
> On 25/01/17(Wed) 10:36, Stefan Sperling wrote:
> > On Tue, Jan 24, 2017 at 03:10:34PM -0500, mabi wrote:
> > > Hi Stefan
> > > Thanks for your input. It looks like the g2k16 modifications to the athn
> > > code from awolk@ did not
On 25/01/17(Wed) 10:36, Stefan Sperling wrote:
> On Tue, Jan 24, 2017 at 03:10:34PM -0500, mabi wrote:
> > Hi Stefan
> > Thanks for your input. It looks like the g2k16 modifications to the athn
> > code from awolk@ did not make it into the 6.0 release. So there is still
> > hope for 6.1 ;-)
>
>
On Tue, Jan 24, 2017 at 03:10:34PM -0500, mabi wrote:
> Hi Stefan
> Thanks for your input. It looks like the g2k16 modifications to the athn code
> from awolk@ did not make it into the 6.0 release. So there is still hope for
> 6.1 ;-)
There was a rabbit hole this diff by Adam fell into. I don't
have any PCI or miniPCI
interfaces...
Regards
M.
Original Message
Subject: Re: athn0: device timeout (AR9271 USB 2.0 Wifi-key as hostap)
Local Time: January 23, 2017 11:28 PM
UTC Time: January 23, 2017 10:28 PM
From: s...@stsp.name
To: mabi , misc@openbsd.org
On Mon, Jan 23
ery day
> > that the athn0 device times out, kernel log:
> >
> > athn0: device timeout
> >
> > and the only way to make the wireless work again is to reboot the firewall.
> > I was told this would get better with 6.0 but I can't see any difference.
On Mon, Jan 23, 2017 at 04:27:32PM -0500, mabi wrote:
> Hi,
> I have an Atheros AR9271 Wifi USB 2.0 key on my OpenBSD 6.0 firewall in order
> to use as an access point. Unfortunately it happens nearly every day that the
> athn0 device times out, kernel log:
>
> athn0: devic
Hi,
I have an Atheros AR9271 Wifi USB 2.0 key on my OpenBSD 6.0 firewall in order
to use as an access point. Unfortunately it happens nearly every day that the
athn0 device times out, kernel log:
athn0: device timeout
and the only way to make the wireless work again is to reboot the firewall
/ Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Dienstag, 9. August 2016 10:13
An: Miscellaneous OBSD
Antwort an: ML mail
Betreff: Re: athn0: device timeout with AR9271
Uh oh, now it all makes sense with AP mode is not working propery with my
athn...
Can anyone recommen
hn.4
Last line "Bugs":
Host AP mode does not work with USB devices.
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Montag, 25. Juli 2016 12:00
An: Miscellaneous OBSD
Antwort an: ML mail
Betreff: athn0: device timeout with AR9271
Hi,
I installe
USB dongle:
athn0 at uhub1 port 4 configuration 1 interface 0 "ATHEROS USB2.0 WLAN" rev
2.00/1.08 addr 4
athn0: AR9271 rev 1 (1T1R), ROM rev 13, address c4:e9:84:xx:xx:xx
There error is the following (many of these messages are repeated):
athn0: device timeout
My /etc/hostname.athn0 is
Some news here... I upgraded the BIOS from a version from 2014 to 2016.
Unfortunately that did not change anything to the timeouts. I will now wait
until beginning of September to upgrade to OpenBSD 6.0 and see if that helps.
I will keep you guys posted.
On Tuesday, July 26, 2016 11:25 PM,
On Tue, Jul 26, 2016 at 07:57:46PM +, ML mail wrote:
> Should I upgrade to -CURRENT?
Yes!
Hi ML,
in which machine is the usb dongle plugged in?
Alix/Apu1/Apu2? Other?
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Dienstag, 26. Juli 2016 21:59
An: Adam Wolk; Miscellaneous OBSD
Antwort an: ML mail
Betreff: Re: athn0: device timeout with
Yeah,
But answer to list and Adam as well, sorry pressed wrong button on my
BlackBerry.
Freundliche Grüße / Regards
-stefan kapfhammer
Originalnachricht
Von: ML mail
Gesendet: Dienstag, 26. Juli 2016 22:34
An: Kapfhammer, Stefan
Antwort an: ML mail
Betreff: Re: AW: athn0: device timeout
reff: Re: athn0: device timeout with AR9271
Hi Adam,
I upgraded yesterday from 5.8 to 5.9 and already encountered this morning the
same issue. In the kernel log I get a ton of these messages:
athn0: firmware command 0x17 timed out
athn0: firmware command 0x18 timed out
Now what would be the next
Hi Adam,
I upgraded yesterday from 5.8 to 5.9 and already encountered this morning the
same issue. In the kernel log I get a ton of these messages:
athn0: firmware command 0x17 timed out
athn0: firmware command 0x18 timed out
Now what would be the next step? Should I upgrade to -CURRENT?
or
On Mon, Jul 25, 2016 at 01:31:13PM +0200, Stefan Sperling wrote:
> On Mon, Jul 25, 2016 at 09:57:38AM +, ML mail wrote:
> > Hi,
> >
> > I installed a USB Wifi card on my OpenBSD 5.8 firewall as AP and from time
> > to time there are timeouts which prevents any access to it anymore until I
>
On Mon, Jul 25, 2016 at 09:57:38AM +, ML mail wrote:
> Hi,
>
> I installed a USB Wifi card on my OpenBSD 5.8 firewall as AP and from time to
> time there are timeouts which prevents any access to it anymore until I
> either plug out and in the Wifi dongle again or reboot.
>
Please upgrade
configuration 1 interface 0 "ATHEROS USB2.0 WLAN" rev
2.00/1.08 addr 4
athn0: AR9271 rev 1 (1T1R), ROM rev 13, address c4:e9:84:xx:xx:xx
There error is the following (many of these messages are repeated):
athn0: device timeout
My /etc/hostname.athn0 is the following:
inet 172.16.20.1 255
> I still experienced hangup on reboot after rebuilding 5.9-beta amd64 ...
> So a switch has to be manually flipped for restarting the box after /bsd
> upgrade.
>
> Do you have the same ?
[OT] I experience the flaky reboot issue (usually after running for a
few days) on my apu2b2 with 5.8-stable.
Le 28.01.16 23:12, Stuart Henderson a écrit :
On 2016-01-27, Kapfhammer, Stefan wrote:
thanks for all the hints with the WiFi problem on an
(beta testing) APU2b4 with a Compex WLE200NX
wireless mini PCIE card.
[..]
At the time I bought the board, the mSATA SSD, WiFi card, pigtails and
dual a
Hello Mathias,
on -stable it runs fine and I've no reboot issues.
Regards,
Stefan
Originalnachricht
Von: Mathias Schmocker
Gesendet: Sonntag, 31. Januar 2016 16:56
Cc: Kapfhammer, Stefan
Betreff: Re: [SOLVED] with pain / was: APU2 WLE200NX ATHN0: Device timeout
Le 28.01.16 23:12, S
On 2016-01-27, Kapfhammer, Stefan wrote:
> thanks for all the hints with the WiFi problem on an
> (beta testing) APU2b4 with a Compex WLE200NX
> wireless mini PCIE card.
[..]
>
> At the time I bought the board, the mSATA SSD, WiFi card, pigtails and
> dual antennas, PCengines had the information
Hello misc,
thanks for all the hints with the WiFi problem on an
(beta testing) APU2b4 with a Compex WLE200NX
wireless mini PCIE card.
âI spent 10th of hours in checking hardware,
configuration, reinstallation of snapshotsâ, ...
Finally it works, I had nearly given up in that issue.
Yesterd
i Popescu ; misc@openbsd.org
Betreff: Re: wle200nx WiFi card on apu2b4 - athn0: Device timeout
Hello Mihai,
I installed the current snapshot 2015-12-28 and the corresponding
athn-firmware for 5.9 Here is the output from dmesg and the debug output
from 'ifconfig athn0 debug'
'ifconf
> 'ifconfig athn0 scan' got result 'none'
> The scan with my NB shows 7 active AP's.
If those APs support n mode only, I don't think you will see them. Be
sure at least yours is /a/b/g.
assic
and my notebook (Toshiba Portege Z930-12J). The scan with my NB shows 7
active
AP's.
I got the same error 'athn0: Device timeout' with -current.
Here are the outputs.
Friendly regards, Stefan
--dmesg--
OpenBSD 5.9-beta (GENERIC.MP) #1783: Sun Dec 27 17:08:42 MST 2015
dera
Hello Mihai,
thank you for the anwer. I will support of course the community and the
developers with logs and outputs, to improve the OS and the corresponding
drivers.
At the moment I'm in vacation and have only access to a minimal equipment.
(Notebook, APU, AP) Next week, things will go much easi
Hello Chris,
thank you for giving deeper insights, how the driver works.
Would you give me some advise, in which order I have to
set the commands in hostname.athn0 for accessing an
access point (AVM FritzBox 7490).
This is only for setup, testing and configuration.
Later on, this box will be conn
Hello Dániel,
thank you for your reply. I changed from PCIe slot 1 to PCie slot 2 - same
result.
got athn0: device timeout. (Sorry forgot the "n" in error msg in first post)
I tried also to set media with
- media autoselect
- media autoselect mode 11g
- media DS1 mode 11g
but won'
> In doubt try an older but reliable Mainboard/Hardware/Bios. Modern
> Mainboard/Hardware/Bios CAN make difficulties.
Agree and agree. I've had a vaguely similar experience in 2014 with a
combination of Debian 7, a "latest and greatest" mobo, a noname PCIe
USB3.0 card, a 15m USB extension cable, a
no problems.
In doubt try an older but reliable Mainboard/Hardware/Bios. Modern
Mainboard/Hardware/Bios CAN make difficulties.
Thank you all!
Alex
--
View this message in context:
http://openbsd-archive.7691.n7.nabble.com/bsd-athn0-device-timeout-tp285288p285519.html
Sent from the openbsd
I own a Compex WLE200NX Atheros AR9280 Minipci-express Wlan Card and use it
in hostap-mode.
Every 10 minutes i get the following error:
/bsd: athn0: device timeout
The Wlan connections and all radio/video streaming stopps.
Then i do manually a "sh /etc/netstart athn0" and the r
On Sun, Nov 29, 2015 at 02:52:15PM +0100, Adam Wolk wrote:
> Now to be precise. I can use this dongle quite fine. It sometimes goes
> up to 1 hour of usage without any timeouts. When it does timeout it's
> usually in rapid succession (like 2-3 times in next 10 minutes). Each
> time after a timeout
I have the same problem with a new macbookpro12,1 my urtwn adapter work
just fine in a regular ehci(4) machine, but on xhci(4)'s macbookpro I
need to reconnect like 10 times, and even that way, doesn't work. :/
On 28/11, Stefan Sperling wrote:
; On Sat, Nov 28, 2015 at 07:35:00AM -0700, bluesun0
On Sat, 28 Nov 2015 22:30:03 -0800
Bryan Vyhmeister wrote:
> On Sat, Nov 28, 2015 at 09:24:23AM -0700, bluesun08 wrote:
> > ok, now i tested my adapter on
> > a) another machine
> > b) another usb port.
> >
> > Result: The adapter don't work on a) and don't work on b).
> >
> > Is there any oth
On Sat, Nov 28, 2015 at 09:24:23AM -0700, bluesun08 wrote:
> ok, now i tested my adapter on
> a) another machine
> b) another usb port.
>
> Result: The adapter don't work on a) and don't work on b).
>
> Is there any other Wifi-USB-adapter which work reasonably reliable on
> OpenBSD in HostAP mod
://openbsd-archive.7691.n7.nabble.com/athn0-device-timeout-tp283934p283972.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.
So now i can test my athn device on
a) a different host controller and
b) on a different machine.
The results: The athn device won't work on a) and won't work on b).
--
View this message in context:
http://openbsd-archive.7691.n7.nabble.com/athn0-device-timeout-tp283934p283969
On Sat, Nov 28, 2015 at 07:35:00AM -0700, bluesun08 wrote:
> xhci0 at pci0 dev 20 function 0 "Intel Bay Trail xHCI" rev 0x0c: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> uhub2 at uhub0 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/85.37 addr 3
> a
nfiguration 1 interface 0 "ATHEROS USB2.0 WLAN" rev
2.00/1.08 addr 6
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (84a821b54c978b8b.a) swap on sd0b dump on sd0b
athn1: could not load firmware
--
View this message in context:
http://openbsd-archive.7691.n7.nabble.com/athn0-device-timeout-tp283934p283965.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.
athn-ar9271
--
View this message in context:
http://openbsd-archive.7691.n7.nabble.com/athn0-device-timeout-tp283934p283962.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.
On Sat, Nov 28, 2015 at 03:59:08AM -0700, bluesun08 wrote:
> Hi again,
>
> here are more error-messages:
>
> Nov 28 20:34:23 openbsd /bsd: athn0 detached
> Nov 28 20:34:25 openbsd /bsd: athn0 at uhub0
> Nov 28 20:34:25 openbsd /bsd: port 1 configuration 1 interface 0 "ATHEROS
> USB2.0 WLAN" rev
timed out
Nov 28 20:35:07 openbsd /bsd: athn0: firmware command 0x17 timed out
--
View this message in context:
http://openbsd-archive.7691.n7.nabble.com/athn0-device-timeout-tp283934p283949.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.
Hi,
i have a TP-Link TL-WN722N Wlan-Stick.
dmesg says: athn0: AR9271 rev 1 (1T1R), ROM rev 13, address
c4:e9:84:dc:44:ba
But after booting i get the following error message and the stick don't work
any more:
athn0: device timeout
What could be the problem here?
--
View this messa
52 matches
Mail list logo