the Last attack and have a lightpen (if you
mean barcode reader) for trade.
Please mail me directly in order to come to some deal.
Regards,
Jeroen Smael
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
- Reply to All the Original Message -
Author: msx-admin
To: [EMAIL PROTECTED]
Date: 01
problem:
- Olivier Gillot send me a lousy COPY in stead of an original!!!
So for all you boys and girls out there looking for ORIGINAL games:
Don't pay before you receive when dealing with Olivier Gillot.
Regards and good hunting,
Jeroen Smael
P.S. Does anybody out there own an original Laydock
Ladies and Gents,
I have two small technical questions for ya'll.
(1) How can I check in my program if it is running on an emulator or on 'the
real thing'?
(2) Which emulators support (all) undocumented Z80 instructions?
Regards,
Jeroen Smael
--
For info, see http://www.stack.nl/~wynke
a cartridge slot to this
card?
Hope somebody can help me solve this problem (would save a lot of deskspace
;-)).
Regards,
Jeroen Smael
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
' are that it powers up, but does
not (correctly) run the cartridges. It seems to do something, but I cannot make
out what it does AND it is not consistent.
PLEASE HELP ME, I'M DESPERATE!
Does anybody have the schematics for this card (at LEAST of the connector)!
Regards,
Jeroen Smael
--
For info, see http
if your monitor/TV can't handle the
CVBS (or YC) signal, using RGB (or YUV) is the best solution.
Regards,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
Hi,
Perhaps a stupid question about the Sony HB-F700 MSX2.
I have three Sony HB-F700 computers. Two of them have HB-F700D and one has
HB-F700P on the casing.
What is the difference between the two models?
Regards,
Jeroen Smael
P.S. Depending on the answer I'm willing to sell one or two
nifty soldering in one
of my Sony's in order to fit it with an 'International' keyboard.
Anyways: Thanks for all reactions.
Jeroen Smael
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
[EMAIL PROTECTED] wrote:
beessie (17:48 and still @ work)
[EMAIL PROTECTED] wrote:
Think that's bad? It's 18:10 now and my working day lasts until
22:30... and I started in the morning, too.
Hi you two,
Did you start at 06:45 just as I did, or did you start at 11:00 and are just
making
Eric Boon Wrote:
The fun part is that I never received the original mail with the attachment
- only a warning mail from the mail-daemon that the attachement was infected
(which also gave me the info that Jeroen Smael and me are the only ppl from
ICT on the the msx-list ;-)):
Damn
[EMAIL PROTECTED] wrote:
Hi Manuel,
I think Marco meant it the other way around (MCCW
working for us), but I guess you couldn't resist the
opportunity to draft people for MCCW ;-)
Of course. And we talked a little about sharing articles
in the past. We never worked it out though.
If I
have the motivation
anymore.
In case I am wrong: PLEASE JOIN US! ;-)
Actually, that goes for anyone.
Hi Manuel,
I think Marco meant it the other way around (MCCW working for us), but I guess
you couldn't resist the opportunity to draft people for MCCW ;-)
Regards,
Jeroen Smael
FutureDisk
Manuel wrote:
Monitor connector Philips
pin 7 NC
pin 6 +12V
pin 3 AUDIO
pin 8 NC
pin 1 +5V
pin 5 CVBS (color video PAL)
pin 4 Ys (monochrome)
pin 2 gnd ('luminance')
My guess is I should use these pins:
pin #3 for the audio
pin #4 because it's a green monochrome
Manuel wrote:
You mean soldering
the *two* returns (CVBS/monochrome and AUDIO)
to the GND pin? Or just one? This may sound
a silly question but, as my cassette connector
cable has only one of the two cables (in, out)
soldered in the GND pin, I was wondering.
Thanks to you two for your
!!!
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
:
Jeroen Smael wrote:
Let me state again that this is not a personal vendetta against
anyone or anything (MCCW)! This is just a sad remark that people are
only willing to write down interesting things concerning MSX when
they hear that MCCM will rise from it's grave.
The only reason for posting my
me and write a NEW article for us ;-)
Regards,
Jeroen Smael
FutureDisk
Homepage: http:\\www.futuredisk.msxnet.org\
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-
Jeroen Smael wrote:
So I will dare ~Grauw here in asking him PERSONALLY to write ANY
article concerning MSX for us. By doing so I hope to prove that
people in general, are just not willing to write articles for us.
Grauw wrote:
Please ~Grauw surprise me and write a NEW article for us ;-)
I'm
wait until the MCCM rises from it's grave (if it ever does)!
Enough said,
Jeroen Smael
FutureDisk
PS. This doesn't mean that I don't want the MCCM undead(line) ;-)
Homepage: http://www.futuredisk.msxnet.org/
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
[EMAIL PROTECTED] wrote:
SNIP
The reason that he asked money for it, is the same reason why Datax
asked money for Track magazine. Fokke really had a lot of work in
making MSX-Dos 2.40. And he only asked 25 guilders for it including
postage. People who are interested in this update can
3
alternatives but he doesn't think it will work Maybe somebody can help him?
The problem is that he hasn't got the money to fund it..
That is bad news indeed!
Greets,
Bart
Jeroen Smael
FutureDisk
P.S. I think the Tilburg fair was a GREAT success. Had lot's of fun,
seen many people
n can tell us more when he reads
this...
--[ MARI ]--
Hi,
Just jumping in here.
You can wait FOREVER for Koen's answer, as he doesn't read the
mailinglist.
Come by the FutureDisk stand in Tilburg and ask Koen personally.
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
Hi all,
Due to the pressure of releasing the FutureDisk BEFORE Tilburg, we
stupidly made 2 minor errors on the disk. Because of these errors you
cannot read the Dutch 'Nawoord' and the English 'Emulator Corner' (the
menu points to the wrong file).
THIS PROBLEM CAN BE CORRECTED!
Just surf to
"Rieks W. Torringa" wrote:
Hi
Currently the highest offer I received (and that was today)
was HFL 250,-- for this Snatcher.
Rieks
[SARCASTIC MODE ON]
Is that post and package included, or don't you make enough profit out
of this deal to pay for that.
[sarcastic mode of
is the problem?
Thanx!
Hi Nestor,
Perhaps a stupid remark, but do you call this routine or do you jump to
it? If you call it, the JP at the end causes your problem. If you jump
to this routine, I don't see anything wrong with it (somebody else?).
Regards and happy (bug) hunting,
Jeroen Smael
FutureDisk
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack
don't know the 'technical' name)
Patrick 'Patsie' Lina, make your choice and mail us the connections!
Greetz,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubs
s only one joystick
connector and one network cable.
Greetz,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
Patrick 'Patsie' Lina wrote:
Hi all!
I still say we stick with DB9 connectors but to be more flexible, here's a
new suggestion: Why not 'split up' the joysti
e.
Greetz,
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED]
'). If you can't find it (the WordPerfect version I mean),
please let me know, as I also have another program that lets you
create barcodes (some German shareware programm). I'm afraid I cannot
help you any further with WordPerfect, because I don't have it myself.
Greetz,
Jeroen Smael
FutureDisk
Hi Guys,
I have a simple question:
Does anyone have the manual for Hisoft GEN80 Assembler?
What I definitely need to know is how I can use conditional
compilation, e.g.:
if something
ld a,1
else
ld a,2
endif
Thanx in advance,
Jeroen Smael
FutureDisk
Homepage: http
Hi All,
I got the connectors, I've got my soldering iron, I've got me some
wire, now what else do I need.
Ah yes, software. Is there any news about the software?
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email to [EMAIL
*
Greetz,
Jeroen Smael
FutureDisk
homepage: http://hagen.let.rug.nl/~s0957372/main.htm
http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without
]
greetz
wolfgang
Greetz,
Jeroen Smael
FutureDisk
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
Hi Guys,
The new FutureDisk with lots of goodies, games and texts is on it's way.
It's a disk and we call it:
FutureDisk #36 - Compile edition
Available for non members at the MSX Fair Tilburg and the MSX Fair
Barcelona !
Jeroen Smael
FutureDisk
More info available at our homepage
this or correct it.
The big question is: DO I NEED TO RESOLDER MY CABLE (hope not :-( )!
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROT
video with computer animations
using this cartridge?
Thanx in advance,
Jeroen Smael
FutureDisk
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL
:-( )!
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org/
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack
hunting and minesweeper)
For information about FutureDisk #35, or any other FutureDisk product, see:
http://hagen.let.rug.nl/~s0957372/main.htm
Jeroen Smael
FutureDisk
P.S. FutureDisk #36 will be released just before the MSX fair in Tilburg.
MSX Mailinglist. To unsubscribe, send an email
your question: FD#14 is the Kurt Cobain special.
Jeroen Smael
FutureDisk
Homepage: http://www.futuredisk.msxnet.org
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problem
42 matches
Mail list logo
