[Nighthawk Lovers] Ross Jamison wants you to see this item at Amazon.com

What about these plug wires. I'm going to change plug wires also. I also went to Motorcycle Super Store and they offer accel and Taylor Made. I've used Accel before on cars and have been pleased with them. The are cut and make, however, I have all the tools to do that. Ross

Re: [Nighthawk Lovers] Coil

Thank you, Ross M. Jamison > On Nov 7, 2015, at 6:26 PM, Allen Thomas wrote: > > http://pages.ebay.com/motors/link/?nav=item.view=301712544801=web > > Allen Thomas > >> On Nov 7, 2015 7:13 PM, "Allen Thomas" wrote: >> I bought a pair of them

Re: [Nighthawk Lovers] Coil

Allen, Thank you. I bought them. If 1 coil when out, then other is probably getting ready to. Thank you, Ross M. Jamison > On Nov 7, 2015, at 6:26 PM, Allen Thomas wrote: > > http://pages.ebay.com/motors/link/?nav=item.view=301712544801=web > > Allen Thomas > >>

RE: [Nighthawk Lovers] Conversion kits: chain drive to belt drive.

How about a '92 night hawk? I have a 17t on mine Thank you, Ross -Original Message- From: Coach Harry tricoachha...@gmail.com Sent: ‎6/‎4/‎2015 2:15 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Conversion kits: chain drive

RE: [Nighthawk Lovers] SP700

Thank you for the product review. Better than a professional review Thank you, Ross -Original Message- From: EGrider gevan...@gmail.com Sent: ‎5/‎31/‎2015 5:55 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] SP700 Not a new

RE: [Nighthawk Lovers] 1985 NH650 - loose clutch?

Of hand, I would say make sure you have correct oil in it. That is I believe it is a wet clutch system Thank you, Ross -Original Message- From: Adam Condit adamcon...@gmail.com Sent: ‎5/‎27/‎2015 3:08 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject:

RE: [Nighthawk Lovers] Re: Corbin seat

. On Monday, May 25, 2015 at 10:52:44 AM UTC-7, Rmj wrote: It finally arrived. I was told by Corbin, that I could not use my Mutatsu sissy bar back rack. Well, knowing more than Corbin, I tried to install the seat with the sissy bar. Guess what? Corbin IS smarter than me. I had my River Road

RE: [Nighthawk Lovers] On the road...

Cool Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎5/‎26/‎2015 10:50 AM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] On the road... Hello Paul p...@hondanighthawks.net, The message you are sending is too large. All

[Nighthawk Lovers] Corbin seat

It finally arrived. I was told by Corbin, that I could not use my Mutatsu sissy bar back rack. Well, knowing more than Corbin, I tried to install the seat with the sissy bar. Guess what? Corbin IS smarter than me. I had my River Road tail bag attached to the sissy bar. It contains my gloves,

RE: [Nighthawk Lovers] Dent removal

talked to a guy who does it on cars for a living. He said he had never had any luck with a motorcycle tank, Graham Sent from my iPad On May 22, 2015, at 21:29, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Has anyone used one of those dent puller on their fuel

[Nighthawk Lovers] Kawi Vulcan Classic

Just went across the road to our local Kawi, Yami, KTM dealer while having a car tire fixed. Sat on the Vulcan Classic it fit me perfectly very comfortable. Just like my '79 Electra glide. Thank you, Ross -- You received this message because you are subscribed to the Google Groups

RE: [Nighthawk Lovers] Dent removal

drilled holes to pull a dent, bondoed over it, painted it, and parked next to his gas water heater. Gas ate through the bondo and burned his garage down. On May 22, 2015 20:29, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Has anyone used one of those dent puller

[Nighthawk Lovers] Road trip

My 40th high school reunion is the weekend of Oct. 10. I'm planning to tow my bike to the L.A. area. I'm too decrepit to ride there and back. However, when I get there, I'm planning a week of riding to my old haunts. Rosemead blvd to Huntington beach, Rim of the World Highway, San Gabriel

[Nighthawk Lovers] Dent removal

Has anyone used one of those dent puller on their fuel tank? The type were you glue on a part then use some kind of fixture/puller? Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group

RE: [Nighthawk Lovers] On the road again...

Have a safe trip. Enjoy Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎5/‎17/‎2015 10:19 PM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] On the road again... Hey gang! I'm going to be hit or miss around here for the

RE: [Nighthawk Lovers] Having weird horn issue

Buy some electronics spray at auto store. May help with corrosion Thank you, Ross -Original Message- From: Matthew Ward mastermech...@gmail.com Sent: ‎5/‎4/‎2015 6:35 AM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] Having weird

RE: [Nighthawk Lovers] tip for getting carb boots on and off

You can also let them set in a pan of warm/hot water Pryor to install. This makes them more pliable, expands them a little the water left on the boots acts as a lubricant will dry. Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎4/‎28/‎2015 10:33 AM To:

RE: [Nighthawk Lovers] Just sitting here

Agreed Thank you, Ross -Original Message- From: Tommy Hill ominbo...@gmail.com Sent: ‎4/‎26/‎2015 8:33 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Just sitting here Always reset the trip odometer. Start looking for gas at

Re: [Nighthawk Lovers] Rebuild gauge cluster, Done.

Wow. Now your going to tap/tax my memory of air moving/handling technology. Air at sea level and 70oF weighs 70 pounds per cubic foot. The higher in elevation the less weight per cubic foot the air will have. When you at humidity it makes the air lighter believe it or not. So the less the

Re: [Nighthawk Lovers] Rebuild gauge cluster, Done.

James, Correction - air at sea level and 70oF equals .075 lbs per cubic foot. Thank you, Ross M. Jamison On Apr 19, 2015, at 5:51 PM, James O'Gorman aspor...@gmail.com wrote: So the question now is - how does humidity change your speed??? :) On Apr 19, 2015, at 16:16, Tommy Hill

RE: [Nighthawk Lovers] Re: I LIKE this motorcycle...

Have not riden but have sat on an F6B. More room, feels lighter, easier to get off side stand lower center of gravity. Thank you, Ross -Original Message- From: Graham Rogers grahamjoanrog...@gmail.com Sent: ‎4/‎17/‎2015 7:04 AM To: nighthawk_lovers@googlegroups.com

RE: [Nighthawk Lovers] Ladies Gentleman...

Where in so cal? Thank you, Ross -Original Message- From: Allen Thomas althomas...@gmail.com Sent: ‎4/‎14/‎2015 7:41 AM To: Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Ladies Gentleman... Sitting in a SoCal garage I'd guess. Very

[Nighthawk Lovers] Victory

Saw my 1st, maybe my only, Victory based cop bike. Looked good. Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an email to

[Nighthawk Lovers] Easter

Happy Easter. May God help you keep the shiny side up the greasy side down. And may all you rides be safe adventures. Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop

RE: [Nighthawk Lovers] Re: 1996 NH 750 - chain and sprockets

I put a 17 on my '92 750 I like it. It is similar to having a 6th gear. Rear is a 38, which I believe is stock. Thank you, Ross -Original Message- From: EGrider gevan...@gmail.com Sent: ‎3/‎23/‎2015 7:39 AM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com

RE: [Nighthawk Lovers] Who wants to win a custom hard-tail Honda Chopper?

Cool Thank you, Ross -Original Message- From: Joey Kelley sandp...@gmail.com Sent: ‎3/‎7/‎2015 1:23 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] Who wants to win a custom hard-tail Honda Chopper? Hey All, A chopped Honda

[Nighthawk Lovers] My '92 night hawk just turned 32,000. Runs great

Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send

[Nighthawk Lovers] Vtx

Other than engine size is there much difference in the vtx 1100 vtx 1300? One better than the other? Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails

RE: [Nighthawk Lovers] 1998 Honda 750 Nighthawk Special Edition

Graham, How do those bike compare to my Suzuki GT 550 2-stroke triple of about the same vintage? Thank you, Ross -Original Message- From: Graham Rogers grahamjoanrog...@gmail.com Sent: ‎3/‎2/‎2015 8:12 AM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject:

RE: [Nighthawk Lovers] Looking to buy a NightHawk, but need advice...

Joshua, Where do you live? Thank you, Ross -Original Message- From: Joshua Davis qball...@gmail.com Sent: ‎2/‎14/‎2015 12:37 AM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] Looking to buy a NightHawk, but need advice... Hello

[Nighthawk Lovers] Heaven

Went to see a customers bike collection yesterday. 77 antique/vintage/classic bikes. He specializes in rebuilding Vincents. He has 3= Honda CBX, '69 CB 750, a 650 Honda twin. He also has cagiva, moto-guzzi, mv agusta's, BMW. He has #1 of only 15 Mammoths by Climer-Nusch, very rare. I'm going to

RE: [Nighthawk Lovers] Clock

True. At the time of purchase, I was riding my bike for work everything. So, I needed to know if I had enough time to stop have a Starbucks after I got off work my counseling duties that started at 6pm. Thank you, Ross -Original Message- From: Tommy Hill ominbo...@gmail.com Sent:

RE: [Nighthawk Lovers] Clock

It is water resistant Thank you, Ross -Original Message- From: Mike21222 via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com Sent: ‎1/‎1/‎2015 1:35 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Clock I was

RE: [Nighthawk Lovers] Cold Weather - Bike difficult to move, doesn'tcoast ('83 650SC)

I agree. Ski pants a good pair of cold weather gloves, if you can find them. Thank you, Ross -Original Message- From: Kyle Munz kyle...@gmail.com Sent: ‎9/‎14/‎2014 7:55 AM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Cold

RE: [Nighthawk Lovers] Cold Weather - Bike difficult to move, doesn'tcoast ('83 650SC)

I also have a carrhart jump suit but it's too warm for the coldest Houston winter. Thank you, Ross -Original Message- From: Kyle Munz kyle...@gmail.com Sent: ‎9/‎14/‎2014 7:55 AM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers]

[Nighthawk Lovers] A 1st for me

1st ever I have encountered an unfriendly m/c rider. Maybe it has to do Electra glide riders in Claude, Tx. Very unTexan Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop

RE: [Nighthawk Lovers] New To Riding - Picked Up A 2000 Nighthawk 750

Peter, Welcome to the group. We look forward to helping in any manner we can Thank you, Ross -Original Message- From: Peter psz...@szaroconsulting.com Sent: ‎8/‎28/‎2014 8:30 AM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] New To

RE: [Nighthawk Lovers] Pet cock hookup

A special welcome to Ross from Ross Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎8/‎16/‎2014 11:49 PM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Pet cock hookup Welcome to the group Ross! Paul

RE: [Nighthawk Lovers] Nighthawk carb repairs

Welcome Craig Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎8/‎16/‎2014 11:48 PM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Nighthawk carb repairs Hey Craig, welcome to the group! Glad you're here. I will have

RE: [Nighthawk Lovers] 1991 Nighthawk 250 - exhaust

Check out Cherry bomb mufflers. They make mufflers for bikes. www.Cherrybomb.com Thank you, Ross -Original Message- From: Allen Thomas althomas...@gmail.com Sent: ‎8/‎13/‎2014 9:43 AM To: Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers]

RE: [Nighthawk Lovers] Nighthawk 700S

Beautiful. Thank you, Ross -Original Message- From: Graham Rogers grahamjoanrog...@gmail.com Sent: ‎8/‎6/‎2014 2:01 PM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] Nighthawk 700S Here is my latest project about completed. I found the luggage rack

RE: [Nighthawk Lovers] How to tell you're a true Nighthawker....

Happy Birthday Kyle Thank you, Ross -Original Message- From: Joey Kelley sandp...@gmail.com Sent: ‎7/‎14/‎2014 3:50 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] How to tell you're a true Nighthawker Its you're birthday - you

[Nighthawk Lovers] Crash bars

Will crash bars that are advertised as fitting a '93 - '03 750 nighthawk fit my '92? Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an

RE: [Nighthawk Lovers] A new kind of motorcycle I might want next year

I had a 2007 Chevy Malibu as a company car. 2.4 liter 4-cylinder. After it got broke in, it would get 40Mpg on the highway. I got 42 mpg one day with a tail wind. Thank you, Ross -Original Message- From: Kurt Nolte vturbine.po...@gmail.com Sent: ‎6/‎30/‎2014 1:52 PM To:

RE: [Nighthawk Lovers] height questions

Some of the dual sports are tall. I think the Kawasaki dlr 650 the Suzuki Dr 650 are like 35 high seats Thank you, Ross -Original Message- From: Ralph Dewar dewa...@gmail.com Sent: ‎6/‎26/‎2014 2:22 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject:

[Nighthawk Lovers] Sad story

My wife has a coworker located in another office, whom he and his wife were in an m/c accident. They are about our age, mid 50's. Unfortunately the wife died at the scene. He lived but obviously has injuries. Doctors let him out of the hospital too plan his wife's funeral. We have no details on

RE: [Nighthawk Lovers] Re: idle questions

Check for broken return spring Thank you, Ross -Original Message- From: Allen Thomas althomas...@gmail.com Sent: ‎6/‎18/‎2014 3:26 AM To: Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Re: idle questions Cchoke permanently engaged will

RE: [Nighthawk Lovers] Re: What to do to clean out Ethanol gas fromsitting for 45 days??

I use some seafoam typically once a month, followed by Lucas in the next tank. Thank you, Ross -Original Message- From: Kurt Nolte vturbine.po...@gmail.com Sent: ‎6/‎17/‎2014 8:31 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers]

RE: [Nighthawk Lovers] Salvage title

On a car, not a bike. Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎6/‎16/‎2014 10:58 AM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] Salvage title Has anyone ever transferred a salvage title before? Paul

RE: [Nighthawk Lovers] My Nighthawk 750

Welcome Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎6/‎10/‎2014 12:22 AM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] My Nighthawk 750 Hey Jeremy, welcome to the group and thanks for sharing your story. I will

RE: [Nighthawk Lovers] 700S hard to start

I had to use two cans right after the other to get my carbs straight when I first got my bike. Thank you, Ross -Original Message- From: Tommy Hill ominbo...@gmail.com Sent: ‎6/‎9/‎2014 7:25 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: [Nighthawk

[Nighthawk Lovers] Seats

Hi, What or where has anyone out there sent their seat for recovering? Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an email to

RE: [Nighthawk Lovers] Repair of fuel petcock cover plate

ring that was causing the petcock to leak so I had to remove the cover plate. Sent from my iPad On Jun 7, 2014, at 9:02 PM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Good to know. I did not want to take the plate completely off for fear of having a pile

RE: [Nighthawk Lovers] removing carbs

One kid was because the neighbors got engaged I blame ice cream in bed for the other. #3 #4, I'm not sure how that happened. Thank you, Ross -Original Message- From: Hanghank hangh...@new.rr.com Sent: ‎6/‎6/‎2014 11:39 AM To: nighthawk_lovers@googlegroups.com

[Nighthawk Lovers] Repair of fuel petcock cover plate

My fuel petcock cover plate came loose because the upper/rear rivet head broke. I wanted to buy a new unit however, I kept seeing prices of $165.00. What I did was try to drill it out with a 1/8 drill bit. My drill bit are old and it was dull. I did get in some of the way. I purchased a

RE: [Nighthawk Lovers] Repair of fuel petcock cover plate

, 'RMJ' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: My fuel petcock cover plate came loose because the upper/rear rivet head broke. I wanted to buy a new unit however, I kept seeing prices of $165.00. What I did was try to drill it out with a 1/8 drill bit

RE: [Nighthawk Lovers] Problem with tank and side panels

That would my question also Thank you, Ross -Original Message- From: Kyle Munz kyle...@gmail.com Sent: ‎6/‎5/‎2014 1:47 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Problem with tank and side panels Are you sure you got the

[Nighthawk Lovers] Travel

Paul, I was closer to you than I normally am. I was in and around Portland last week. Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an

RE: [Nighthawk Lovers] Travel

? Paul LeBoutillier www.hondanighthawks.net Honda Nighthawk Lovers Email group On Wed, Jun 4, 2014 at 5:37 AM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Paul, I was closer to you than I normally am. I was in and around Portland last week. Thank you

RE: [Nighthawk Lovers] 2002 Honda Shadow 1100 - 8k miles

if well kept. Least that's how I see it. Sent from my ASUS Pad 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Looking for something that my wife I can ride. We aren't the dainty people we used to be the ergo's on my 750 don't work like they used to 30-35

[Nighthawk Lovers] 2002 Honda Shadow 1100 - 8k miles

Is this a good bike to consider purchasing? Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an email to

RE: [Nighthawk Lovers] 2002 Honda Shadow 1100 - 8k miles

Shadow 1100 - 8k miles Where is it, what bike? Sent from my iPad On Jun 2, 2014, at 6:23 PM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Is this a good bike to consider purchasing? Thank you, Ross -- You received this message because you are subscribed

RE: [Nighthawk Lovers] Luggage rack

Paul, Did you get the Mutazu sissy bar back rest? Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎6/‎2/‎2014 7:12 PM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Luggage rack Hey Tommy, is this kind of a sideline

RE: [Nighthawk Lovers] 2002 Honda Shadow 1100 - 8k miles

nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] 2002 Honda Shadow 1100 - 8k miles I guess it depends if you're looking for a Harley knock-off. Paul LeBoutillier www.hondanighthawks.net Honda Nighthawk Lovers Email group On Mon, Jun 2, 2014 at 4:23 PM, 'Rmj' via Nighthawk Motorcycle

RE: [Nighthawk Lovers] Nighthawk Lovers Membership

Wow that's great Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎5/‎26/‎2014 1:22 PM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] Nighthawk Lovers Membership This group is now made up of 1,223 very cool people! :)

RE: [Nighthawk Lovers] Clunky Shifting and Clutch

Switching to Shell Rotela T helped mine. I can tell when an old change is needed, when gear shifting get more notchy. Thank you, Ross -Original Message- From: Allen Thomas althomas...@gmail.com Sent: ‎5/‎24/‎2014 12:25 PM To: Nightwawk Lovers nighthawk_lovers@googlegroups.com Subject:

RE: [Nighthawk Lovers] Honda CB700S fuel petcock

Graham, My '92 is garaged right because one of the rivets broke. I'm planning on drilling both out using self tapping screws. Next weekend when I get home from this trip. Thank you, Ross -Original Message- From: Graham Rogers grahamjoanrog...@gmail.com Sent: ‎5/‎24/‎2014 2:44 PM To:

RE: [Nighthawk Lovers] Honda CB700S fuel petcock

, not a 700S, however there's an interesting bit of information from Dennis Hammerl at the end about drilling out the rivets and replacing them. http://nighthawk.kylemunz.com/?p=151 -Kyle On Sat, May 24, 2014 at 5:23 PM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com

RE: [Nighthawk Lovers] Honda CB700S fuel petcock

to find a better sealing O ring, graham Sent from my iPad On May 24, 2014, at 7:54 PM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Great info Thank you, Ross From: Kyle Munz Sent: ‎5/‎24/‎2014 5:16 PM To: nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk

RE: [Nighthawk Lovers] Honda CB700S fuel petcock

that the 700s tank is the only model with that size opening, graham Sent from my iPad On May 24, 2014, at 9:37 PM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: I bet that the loose petcock cover, is what is make my bike idle fast. Letting air bypass the valve

RE: [Nighthawk Lovers] Me my Electra Glide - circa 1980

: [Nighthawk Lovers] Me my Electra Glide - circa 1980 That's cool. What are you holding? On May 22, 2014, at 21:25, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Thank you, Ross -- You received this message because you are subscribed to the Google Groups

RE: [Nighthawk Lovers] Old Yeller crosses the country

Now you know why I my family no longer live there, despite being natives. I call it the Peoples Republic of California. Disgraceful. I hope your bike wasn't too badly damaged. Thank you, Ross -Original Message- From: Kyle Munz kyle...@gmail.com Sent: ‎5/‎22/‎2014 9:07 AM To:

RE: [Nighthawk Lovers] Old Yeller crosses the country

I'm enjoying your adventure. So Cal is my old stomping grounds. Was born raised in San Gabriel, just east of LA. Are you heading north or south? Thank you, Ross -Original Message- From: gevan...@gmail.com gevan...@gmail.com Sent: ‎5/‎21/‎2014 12:50 AM To:

[Nighthawk Lovers] Who is our recommended parts supplier?

Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send

RE: [Nighthawk Lovers] Who is our recommended parts supplier?

looking for? -Joey On Tue, May 20, 2014 at 10:22 AM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from

[Nighthawk Lovers] FW: Sissy bar spacers

Paul, Sorry I'm not a very good artist, however, this should give you an idea of how I did my spacers for the Matazu sissy bar. The castle nut has no other purpose than to be a spacer. I did not want to buy a bunch of washers it was the correct length to sit on the long bolt. Thank you,

[Nighthawk Lovers] Idle speed

All of a sudden my bike acts like it has the choke on partially. The only thing I can think of that I have done differently is to switch to super from regular unleaded. Comments? Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk

[Nighthawk Lovers] FW: Sissy bar spacers

Here it is. Sorry it did not make it the 1st time Thank you, Ross -Original Message- From: Ross Jamison r...@navco.us Sent: ‎5/‎19/‎2014 12:15 PM To: roscopic...@yahoo.com roscopic...@yahoo.com Subject: Sissy bar spacers Regards, Ross M. Jamison Ross M. Jamison Sales Manager

RE: [Nighthawk Lovers] rear signal replacement

Graham is correct. I bought four (4). One the fastener molded inside, pulled out they sent another. I have one (1) on now, that when installed, allowed the bulb to come in contact with the lense melted the lense. I replaced the lense with one (1) from an old turn signal. The bulb doesn't seat

RE: [Nighthawk Lovers] Buying advice needed

Mine is a 1992 w/33k on it. Runs great. They will need TLC like anything that's old. Just like me! Thank you, Ross -Original Message- From: Allen Thomas althomas...@gmail.com Sent: ‎5/‎15/‎2014 7:35 PM To: Nightwawk Lovers nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk

RE: [Nighthawk Lovers] Re: New Windshield

I have a similar slip stream. It's been good. Thank you, Ross -Original Message- From: EGrider gevan...@gmail.com Sent: ‎5/‎10/‎2014 9:43 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Cc: p...@hondanighthawks.net p...@hondanighthawks.net Subject: [Nighthawk

RE: [Nighthawk Lovers] Re: New Windshield

LeBoutillier www.hondanighthawks.net Honda Nighthawk Lovers Email group On Sun, May 11, 2014 at 9:00 AM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: I have a similar slip stream. It's been good. Thank you, Ross From: EGrider Sent: ‎5/‎10/‎2014 9:43 PM

RE: [Nighthawk Lovers] Re: New Windshield

? Paul LeBoutillier www.hondanighthawks.net Honda Nighthawk Lovers Email group On Sun, May 11, 2014 at 9:00 AM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: I have a similar slip stream. It's been good. Thank you, Ross From: EGrider Sent: ‎5/‎10/‎2014 9:43

[Nighthawk Lovers] Mutazu sissy bar/bach rest

I purchased 2, what the call barrel bolts, rubber cushions to rest against the plastic side covers, some flat washers a castle nut to act as extra spacer in combo with the barrel nut. I was going to take pictures this weekend but have been busy preparing for Moms day. I will try to get photos

[Nighthawk Lovers] Mutazu

Paul, I got the spelling wrong www.mutazu.com Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an email to

RE: [Nighthawk Lovers] Shifting Issues

Kevin, Welcome. What brand/weight oil did you use. Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎5/‎8/‎2014 5:37 PM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] Shifting Issues Hey Kevin, welcome to the group!

RE: [Nighthawk Lovers] Chains for 17T front sprocket - keep 110

Egrider, Yes. I really my 17t set up. Bike feels good at highway speed. In town, 35-50 mph, 4th feels like 5th. Couple of issues: roll on acceleration from lower rpm range (tach broke) does some lugging. Ok, just down shift. Also take off from a stop needs a tad bit more throttle. Otherwise, I

RE: [Nighthawk Lovers] Backrest issue

] Backrest issue Thanks Ross. Any chance you could post a picture of yours? And what is Mutatsu? Paul LeBoutillier www.hondanighthawks.net Honda Nighthawk Lovers Email group On Mon, May 5, 2014 at 5:26 PM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Paul, I

RE: [Nighthawk Lovers] Backrest issue

tablet On May 6, 2014 4:52 AM, 'Rmj' via Nighthawk Motorcycle Lovers! nighthawk_lovers@googlegroups.com wrote: Paul, Yes. I will take pictures. Mutatsu is an importer of motorcycle accessories. Www.Mutatsu.com Thank you, Ross From: Paul Sent: ‎5/‎5/‎2014 6:49 PM To: Nighthawk Lovers Subject: Re

[Nighthawk Lovers] New tire sprockets

Just had a new Michelin rear tire put on had my sprockets changed. I went to 17t drive sprocket kept the driven sprocket a 38t. Drive was originally 15t. So far I like it. Roll on acceleration is not what it was but Ok. I will let everyone know more as time goes by. Thank you, Ross --

RE: [Nighthawk Lovers] Re: New tire sprockets

sprockets Hey Ross, I just ordered a 17T and I'm eager to see how it feels. Thanks for the post. On Wednesday, April 23, 2014 5:08:47 PM UTC-4, Rmj wrote: Just had a new Michelin rear tire put on had my sprockets changed. I went to 17t drive sprocket kept the driven sprocket a 38t. Drive

[Nighthawk Lovers] Happy Easter/Blessed Passover

My you always keep the greasy side down Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it, send an email to

RE: [Nighthawk Lovers] OIL FILTER CAP CRACKED!

Couple of things you might try. Drill out the threads, and tap for a heli-coil, then fill the outside cracks with either Devcon or JB Weld. I think there is a conversion kit that will change that from cartridge type filter to spin on. Thank you, Ross -Original Message- From: Allen

RE: [Nighthawk Lovers] Re: Oil changing notes...

I let it either run out on the garage floor or in the driveway, blame one of the kids my wife makes them clean it up Thank you, Ross -Original Message- From: Kyle Munz kyle...@gmail.com Sent: ‎4/‎16/‎2014 2:16 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com

RE: [Nighthawk Lovers] CBX 650 E question

Welcome Thank you, Ross -Original Message- From: Paul p...@hondanighthawks.net Sent: ‎4/‎14/‎2014 5:03 PM To: Nighthawk Lovers nighthawk_lovers@googlegroups.com Subject: Re: [Nighthawk Lovers] CBX 650 E question Welcome to the group Aaron!! Do you send a pic? I didn't see one come

RE: [Nighthawk Lovers] Another Nighthawk

On Saturday, April 5, 2014 2:52:28 PM UTC-6, Rmj wrote: Where in Oregon? Thank you, Ross Ross, we're in eastern Oregon on the Idaho border. Paul LeBoutillier www.hondanighthawks.net Honda Nighthawk Lovers Email group -- You received this message because you are subscribed to the Google

RE: [Nighthawk Lovers] Re: 17 t sprocket

=au_as_r?ie=UTF8Make=Honda|59Model=CB750%20Nighthawk|17054Year=1992|1992carId=004n=15684181newCar=1s=automotivevehicleType=motorcycle On Friday, March 21, 2014 9:15:41 PM UTC-4, Rmj wrote: Hello, Anyone know where I can order a 17 t primary drive sprocket for 525 chain for my '92 750? Thank you

RE: [Nighthawk Lovers] Engraving on my grab bar

Cool!!. Go into business! Thank you, Ross -Original Message- From: Paul Bellefontaine nerobel...@gmail.com Sent: ‎3/‎22/‎2014 5:46 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] Engraving on my grab bar Hi all,

RE: [Nighthawk Lovers] Own a NH 250

Rumman, Welcome Thank you, Ross -Original Message- From: Rumman Chowdhury rumma...@gmail.com Sent: ‎3/‎21/‎2014 3:08 PM To: nighthawk_lovers@googlegroups.com nighthawk_lovers@googlegroups.com Subject: [Nighthawk Lovers] Own a NH 250 Hello Paul and everybody Since I was a student I had

[Nighthawk Lovers] 17 t sprocket

Hello, Anyone know where I can order a 17 t primary drive sprocket for 525 chain for my '92 750? Thank you, Ross -- You received this message because you are subscribed to the Google Groups Nighthawk Motorcycle Lovers! group. To unsubscribe from this group and stop receiving emails from it,

  1   2   3   4   >