On the Treo (mine is a 700p) when you are in the Contacts app, the phone
number fields start off with the device set in num-lock (or symbol-lock
if you will.)
How can I emulate this behavior in my app. If the field expects digits,
I'd like to set this mode for the user automatically.
Many
Does anyone know if the Treo 650 can ever be upgraded to run on the new Cobalt
OS?
Also what is the list of Cobalt enabled phones out there if any?
Thanks,
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
programmers
PalmOS can be fairly easy to learn. However, for the less experienced
or those looking to create something quickly CASL has a lot to offer
along with room to grow. Thanks for your comments.
Ed G.
[EMAIL PROTECTED]
www.caslsoft.com
--
For information on using the Palm Developer Forums
Hi all, I am trying to run the COMM.PRC serial test program provided with
Pocket Studio 2.1 but when I tap on it after loading it onto my Tungsten T3 to
start it, I immediately get this message:
Comm68K.c, Line 4008, Unknown SerialDispatch request:0
and the only thing I can do is reset the
and then on Platform ROMs, I get a page that lists
only the ROM image for Palm OS 4.1.2, but none of the earlier
OS images.
Where are the earlier ROM OS images? (I'm looking for 2.0).
Regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev
it so famous!
SHAME ON XEROX!
As a palm developer, I truly hope the Xerox company dies a
horrible and painful death because of their patent
infringement lawsuit.
With best regards (but not for Xerox),
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see http
last a bit longer.
And sorry about my earlier rant. It came from the frustration
of learning that I cannot obtain the earlier OS ROM images (which
is still a frustration for me, but I should not have ranted,
even though I still think Xerox are The Bad Guys in all of this).
Best regards,
Ed
with OS's earlier than 4.0,
but I was hoping to release the game to the general public and
declare 2.0 as the minimum required OS. (That was the reason
I ran CheckPRC on the software.)
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see
instructions. (Is there anything else I should include?)
Any other ideas on how to get started with publishing PalmOS software would be
greatly appreciated.
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support
I forgot to mention - the solution must work on PalmOS 3.0 onward.
Thanks,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
showing a PalmOS
implementation of NTP over the IR port?
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
using the exchange manager or something.
Any good suggestions or web sites with example code would be appreciated.
Thanks,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
in the PalmOS?
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
is running?
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
up the Palm, or will it launch its
normal application instead? (I can find this out later by actually trying it
when I get back home.)
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
or hard key has turned the palm on (but not when
such a key does NOT turn the palm on).
I had a couple of other questions in my original post, also.
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support
Hi.
Is DmGetResource the only method available to get at the version
string (as defined in the 'tver0001' resource)? Is there a more
direct API specifically for the version string?
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see
buffer be? What is the maximum length of
any system error string?
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
Hi.
Concerning Aaron's white paper on this topic, following is a post
that I wrote in reply to the Lock beamin thread (which began on
2004-10-29 at 05:10:00). The following has instructions on how to
obtain the white paper from Palmsource's Knowledge Base.
Regards,
Ed.
-- my Lock
,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
the
serial number - for Palms with FLASH ROM), and it becomes much
more difficult to pirate the software (but still not completely
impossible).
Aaron's white paper had some other good ideas.
Regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http
?
Alternatively, is there an easier way to get the 'tver' resource
version string?
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
I can download it OK.
Go to:
ftp://ftp.calliopeinc.com/palmprog2/
It's called OReillyStarter.zip, not Starter.zip.
There seems to be a lot of other good stuff in there, too.
Regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http
Woops, sorry. You had the right name, after all. I read it wrong.
(I looked for Starter.zip when I first got there.)
Anyway, I had no problem downloading it from the sight you quoted.
Regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http
Why not use FtrGet to determine the ROM version, then call the
glue function if it is earlier than 3.5, or the ROM function
if it is later? I have not tried this, so is there any reason
why this would not work?
Regards,
Ed.
--
For information on using the Palm Developer Forums
interest you,
such as: Exchange Manager: Sending Records, Attachment support
sample code and Guidelines for Attachment Support.
You may also want to look through other categories such as INet
Library or Bluetooth.
Hope this helps.
Ed.
--
For information on using the Palm Developer Forums
into binary, and then write it to the
database.
If you are writing your own mail or send-record client, you
could probably automate almost all of the above steps and may
not even have to use the clip-board.
Regards again,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe
Huh?
Just go to the knowledge database:
http://kb.palmsource.com
and then type signature in the search text field and then
click on search.
It came up with three hits and the first one looks like what you
want.
The knowledge database is your friend!
Regards,
Ed.
--
For information
a form is loaded and
initialised, all the form's objects are locked in dynamic
memory, right? This allows me to get the pointer to a button's
label and expect it to stay there while the form is loaded, right?
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums
= '*';
} else {
*btnLabelPtr = '@';
}
}
Is there any problem with dynamically changing the label using the
above method?
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
it on
the POSE, it did not seem to mind changing the label as in
my previous example code.
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please
see http://www.palmos.com/dev/support/forums/
Platform Software Protection
Near the bottom of the resulting page are .sit (for MAC) and .zip
(for PC) files that contain the white paper.
It has some interesting ideas.
Regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev
to send infomation to a label-maker?
Any suggestions on how to do this would be appreciated. The
end solution must be as low-cost as possible for the end user,
as this is a hobby-related application.
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums
.
Is there a better way to do this that will prevent my code from being broken in
other or future Palm OS versions? Is there a supplied API that I have missed that
will change a form's help resource string ID?
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums
database? How do I do that? (Once I do that, then I can just use that creator ID to
create or open a the application's data database.)
Thanks and regards,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
Ah! That was simple! I was not previously aware of the SysCurAppDatabase function.
Thanks, Ben.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
Thanks, Ben.
I did try looking in the reference index under help but did not find anything
there.
Lesson learned: ALWAYS check the glue lib. Hopefully I'll get that burned into my
bio-firmware. :-)
Thanks,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe
Many third party applications exist that take over the Home button in
order to become the launcher. Handscape comes to mind, but there are a
bunch.
How is this done?
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
Tungsten C has built in Wifi, hires, and an SD slot. 64MB and OS5.2.
Unfortunately, it's not cheap, though at a couple thousand, you could
probably get a good deal.
--On Tuesday, June 24, 2003 4:06 PM -0400 Dave Mottorn
[EMAIL PROTECTED] wrote:
I developed an application for the
Try these functions for converting strings to doubles and back again.
http://www.escribe.com/computing/pcpqa/m71771.html
/edg
--On Saturday, June 21, 2003 1:50 PM +0800 DongDong [EMAIL PROTECTED]
wrote:
I have same question too. I'm going to do a project with floating point
numbers and some
Score another vote for POL. I have it working in three projects so far.
--On Saturday, May 31, 2003 9:12 PM +0300 Maks Pyatkovskiy [EMAIL PROTECTED]
wrote:
At this moment POL 4 can be purchased only as part of Metrowerks
CodeWarrior 9 Pro. All CodeWarrior 9 users can download free POL updates
Many calls, such as DmFindDatabase, refer to a cardNo, which is usually 0,
but could be a memory card.
To find out what cards are available on the device (in addition to 0) one
seems to call VFSVolumeEnumerate in a loop until you run out of volumes.
(I realize that in present day hardware, the
Replying to my own post...
How does one launch an application that resides on a card? The .prc is in
/PALM/Launcher on the card, so how do I get the dbID and SysUISwitch to it?
DmNumDatabases returns 0 when called on card 1.
--On Thursday, February 06, 2003 1:44 PM -0800 Ed Greenberg
[EMAIL
One more point... If your editor window does not have focus, and you can't
see the cursor, just click on the title bar of the window, which will bring
back the focus without the risk of losing the position of the cursor.
--On Wednesday, January 29, 2003 11:24 AM +0100 Rodolphe Bréjaude
--On Monday, January 27, 2003 1:58 AM -0600 Ben Combee
[EMAIL PROTECTED] wrote:
Yes, this is a purely promotional message, but I thought this would be
useful for some people.
If you're in the Atlanta or Chicago areas, I'll be talking to your local
Palm OS developer group this week.
Does
This doesn't take into account the list which has less entries than it's
height can hold.
The problem is solved though.
--On Friday, January 24, 2003 10:12 AM -0600 Jeff Wheeler
[EMAIL PROTECTED] wrote:
Ed Greenberg wrote:
The question was in items. The solution for me, as suggested
by Aaron
I have a list on a form (declared in the resources, not constructed at
runtime) and I need to know at runtime how tall it is.
LstGetVisibleItems only returns the number of active choices. No way to
tell if the list is full or not.
I wonder if I have to embed a constant that I would have to
--On Thursday, January 23, 2003 7:03 PM -0800 Steve Mann
[EMAIL PROTECTED] wrote:
I have a list on a form (declared in the resources, not constructed
at runtime) and
I need to know at runtime how tall it is.
In pixels or items?
Pixels: get the objects bounds.
Items: min(# items, visible
Anyone know how to get Tungsten T functionality (specifically five-way) on
the simulator?
Is it possible to add five-way to the Emulator?
The Fiveway SDK is silent on this issue (that I can find).
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
I would like to report success debugging on the Tungsten T with CW9.
Debugged my way through code using Netlib and talking to a bluetooth
connection. Wow!
--On Monday, January 20, 2003 12:38 AM -0600 Ben Combee
[EMAIL PROTECTED] wrote:
At 14:11 2003-1-19 -0500, you wrote:
Does anyone know
In the case that an application cannot continue, what is the correct UI
behavior after the user presses cancel.
Example:
* App starts and user is dropped into modal dialog box for first-time
setup.
* User provides UID and Password
* App goes off to network and UID/PW fails
* User dropped back
I'm getting a strange error from the emulator that I haven't seen before.
Does anybody know what I might be doing at the application level to cause
this?
... just changed emulated program counter to ___. This address is invalid
because it is not even. And indeed, the address ends in 'f'.
This
--On Monday, December 23, 2002 11:25 PM -0600 Ben Combee
[EMAIL PROTECTED] wrote:
Your problem is that you pass the address of p to PrefGetAppPreferences
rather than the value of p. The OS is retrieving the prefs and storing
it on the stack, which is overwriting your return address. You try
I'm trying to get an HTTP GET (TCP/IP NetLib app) to work on the Tungsten
T. Here's my environment, what I've done, and what I've got.
Tungsten T, PicoBlue (Bluetooth) Access Point. (Problem)
Reference platforms that work:
* Emulator running M515 rom with net calls redirected to the PC
* Palm
I know that one can't debug via USB, but can one get a Tungsten serial
cable to allow debugging.
Specifically I want to debug an app that will be doing NetLib communication
via the Bluetooth interface, and I'd like to be able to step through it on
the device in case it doesn't work in
I'd like to override the UI colors when writing in a list or a field.
Do I have to write with a custom routine, using WinDrawChars, or is there
some easier way?
--
For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
I went to the nsbasic website, but lost interest when I saw that it had a
100K runtime.
--On Tuesday, December 10, 2002 1:15 PM -0700 Dustin Davis
[EMAIL PROTECTED] wrote:
There's no reason to take it off-line. You can't convince me that it is
fast or that the run-time is small, so there is
even exist yet? CodeWarrior's page on it was
very descriptive (including price!) and helpful, but you can't deploy a
solution with the CodeWarrior package. I'm wondering if it's still in the
late vaporware stage
If I get any info, I'll make sure to pass it along.
- Ed
- Original Message
for DmQueryNextInCategory?
- Ed
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
and local variables. Applications may access the
area of the stack above the stack pointer,
but not below it.
All I want to to is get the value of encDate into record.Date. I cant see why this is
failing unless I am missing something. Any
ideas?
Thanks,
Ed.
John Leung wrote:
Try replace
Is there a function that takes in an ASCII value and spits out the character? Sort of
like the Chr$() function in VB... Maybe
I missed it.
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
With the code below, I get the following error:
just read from memory location 0x003CD32, which is in the unused portion of the
stack. The stack range is ... - ... and the
stack pointer is ...
This does not happen everytime. Any ideas?
Thanks,
Ed.
Borislav Kolev wrote:
The I can only
that have used multi-segment apps, is there a noticeable delay or
performance hit
2.) Can I share global variables between the two segments?
Ed.
Chris Ring wrote:
There's a decent discussion of your options in the slides for Designing the
Non-Simple Application from PalmSource 2002 at
http
setting the popuptrigger to fire,
selecting the desired item.
So - which way should I go about this, and am I even on the right track?
Thanks,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
the project to the necessary point.
Any thoughts?
Thanks,
Ed.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/support/forums/
Actually, I believe it says that they _will_ be available. No time frame.
I looked as well and couldn't find them
Members of the Palm OS Developer Program will be able to download the
following tools from the Palm OS website:
- Ed
i
END
END
Pilrc compiles both without error or warning, but I _think_ the first is
incorrect. At the very least it is different syntax than what's on the
manual page at www.ardiri.com.
HTH,
Ed
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http
a few of mine that pilrc thought were just fine.
WRT the menu problem, I've never had that problem personally.
Perhaps it would be useful to post the (relevant portions of) .rcp file?
HTH,
Ed
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http
. Not as dishonest as holding money owed to a developer for 3+
months, but two rights don't make a wrong -- or something like that.
I think this is a great opportunity for someone to step in and be the next
PG or Handango while doing it better and for less. Something will change.
- Ed
At 06:09 PM 10/24/2001 -0700, you wrote:
At 02:16 PM 10/19/2001 -0700, Ed Van Vliet wrote:
I am trying to get a floating point number to display in a field with two
decimal places.
You and me both!
The code below gets a number entered by a user and adds it to a total. The
total is subsequently
At 02:16 PM 10/19/2001 -0700, Ed Van Vliet wrote:
I am trying to get a floating point number to display in a field with two
decimal places.
You and me both!
The code below gets a number entered by a user and adds it to a total. The
total is subsequently displayed.
It works OK but the answer
Their website seems to be a mix of the old and new programs. I couldn't
get to the linked dev programs below by navigating the site. My guess is
it will take some time for the web people to catch up with the PR people.
Did I read correct that there's no more hardware discount?
- Ed
At 11:10 AM 10/2/2001 -0400, you wrote:
(apologies for off topic)
In case people are wondering, it is possible to have your
software listed on Handango, but not for sale. Follow
these steps in the product administration page:
snip
The product is listed now as 'freeware'. The 'buy now' and
work since the emulator complains that I'm looking at
memory I shouldn't I don't want to force that through unless the consensus
here is that it's proper in this case.
What do others do?
/edg
Ed Greenberg
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http
At 10:41 AM 9/24/2001 -0700, you wrote:
There are several popup triggers and associated lists in the form. The
actual list values (not the list index) is what's stored in the DB. I
need to set the current value of the list, which requires an item number
for LstSetSelection, as well as the text
The above led me to realize that the way to retrieve the various entries
in the list is to reset the selection to each one in turn using
LstSetSelection. I hadn't connected with that. Thank you.
Actually, answering my own question, it's easier than that.
LstGetSelectionText takes an
At 08:29 PM 9/20/2001 +0530, you wrote:
I have an application that I am trying to port to PalmOS (3.5 or 4.0). This
application has certain features that are web-based. I need to invoke some
server-side web-scripts that take parameters from my app and output HTML. I
accomplish this on the desktop
Also, one of the important things about Palm is backward compatibility,
and
so far I have suffered minimum inconvenience for Palm, while I have
stopped
using my own WinCE devices altogether.
Maybe this is where Palm has truly missed the boat. What better way to
boost
hardware sales than to
the low end market. An 8 MB Palm V at around $150 might get new
users hooked. Let them upgrade to color and sound when they're ready
to spend more money.
- Ed
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
At 09:41 AM 9/12/01 +0530, Shaikh Khurram Saghir
wrote:
Different solutions are appropriate for different situations. What will
happen if the database does not reside on the local system where the user
syncs his device.
Thank you for reminding me of several issues. Note: I am using Excel
At 05:01 PM 9/11/2001 +0530, you wrote:
Well, Just from the top of my mind. You can write comma separated files at
the dekstop during synchornization or directly from your PDB files and we
all very know that one can import the CSV files in MS access.
Regards,
Khurram+
Couldn't he write a
At 04:10 PM 8/25/2001 +0200, you wrote:
Can I safely do this on a non-editable field ? The documentation let me
thing it's not forbidden, but... is it safe ?
Yes, it's safe. I learned it in the developers class in order to
initialize labels that I wanted to be right justified and bold.
Sorry, Christian. I didn't mean to confuse anyone or slander your product.
Next time I'll check the archive before naming names. :)
- Ed
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
of this and the PilRC Plugin for CW may make this an acceptable
GUI dev environment.
Also, with the Pilrc Plugin, I miss the -h command line option. Is there
any plan to add this functionality, or is it even possible?
Thanks,
Ed
--
For information on using the Palm Developer Forums
is the best procedure.
Thanks,
/edg
Ed Greenberg
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
-0500, Ben Combee wrote:
Ed Greenberg [EMAIL PROTECTED] wrote in message
news:60459@palm-dev-forum...
I have a project in a CVS repository that I would like to get at with
Codewarrior7.
I installed the CVS plugin and I can successfully log into the CVS
server,
but CW doesn't offer
rob is in the UK right now from memory.. email him :) if you want to
support the product.. make changes and send him patches - thats how
free software works.. :)
I would love to support and contribute. But I'm happy with vanilla PilRC
and before I suggested this as a good solution for my
that was incompatible with PRC-Tools, so you
might need to uninstall. My memory may be wrong on this, so check the
archives.
HTH
- Ed
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
I have a project in a CVS repository that I would like to get at with
Codewarrior7.
I installed the CVS plugin and I can successfully log into the CVS server,
but CW doesn't offer the same choices on the VCS menu as in their
documentation. For instance, there is no checkout feature -- not
You might try: http://www.alcita.com/palmpilot/
and: [EMAIL PROTECTED]
Good luck!
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
Finally an answer to that age-old question: What do people at the top of
the world worry about?
Shouldn't you be out wrestling polar bears or something? :)
Really I'm just jealous. Off I go to sit in traffic for another 2 hours.
- Ed
under normal use, even using a poorly
written app.
As for the virus FUD, I think there is still only one reported instance of
a PalmOS virus in the wild, and I don't think it could drain the batteries
instantly.
- Ed
Hi guys,
I feel certain applications
the group name to 1, and then the function worked fine.
Is this a PilRC bug? ;) Hi, Aaron :)
Is this a documentation problem?
Or am I an idiot?
All of the above?
My code works now, so this question is just academic.
- Ed
--
For information on using the Palm Developer Forums, or to unsubscribe
of this application goes. MIDP is
something we were looking into and I'd like to hear feedback (on or off
list) from others who have tried it.
There is also a Java for the PalmOS forum, but if the archives on eScribe
are correct, it's not very active.
Hope This Helps,
Ed
--- Original Message
I found this in the archives some time back, but I couldn't find the
original message to reference. Apologies to the orginal author. Here's
the code:
#ifdef UNIX
#define StrChr(x,y) strchr(x,y)
#define StrCopy(x,y) strcpy(x,y)
#define StrLen(x) strlen(x)
#include stdlib.h
#include
, this function sends a sysNotifyTimeChangeEvent if the Notification
Manager feature is present. Maybe another app isn't handling this.
HTH,
Ed
Helmut Giritzer
http://directory.google.com/Top/Computers/Data_Formats/Markup_Languages/XML/Tools/Parsers/
- Ed
Hi:
Thanks for the useful link. I must most certainly
look into using the Aelfred parser.
However, could anyone direct me to a C library
implementation of an xml parser? It would be greatly
Great idea! I live in Atlanta and this would give me a chance to finally
get a copy of |HaCkMe| 1.0.
(Sorry, Aaron. Couldn't resist.)
- Ed
Aaron,
We would love to have you as a guest speaker! Just say when and I will set
it up.
Jon C. Zaring
[EMAIL PROTECTED]
404.431.5915 US
Aaron
Thanks, Mark! That solved my problem. If I had bothered to read the
DmCompareF documentation I could have solved it myself. But I assumed that
since it worked on reset that my DmCompareF function was working correctly.
I don't even want to know why it did what it did.
- Ed
Ed Lineberry
handheld device in existence.
- Ed
Brian Mathis
[EMAIL PROTECTED
1 - 100 of 113 matches
Mail list logo