Re: A few questions

[Ignasi Cambra]

Hello,
Yes, my main use for PT would be to record and mix piano. I usually record with 
4 mics, but occasionally use 3 when recording chamber music. Most of the time I 
use an Apogee Quartet.
Believe it or not the standard in classical music is Sequoia, because it 
apparently has some very special crossfades that work very well. For all 
recordings I’ve done for record labels Sequoia was always used, and the 
precision with which we could literally edit down to each tiny note on very 
complex passages was incredible. In any case I know Pro Tools is used pretty 
much everywhere, and honestly I’m sure that for my needs it will do just as 
well as Sequoia.
Another question that comes to mind is whether all versions of Pro Tools are 
accessible? Is it Pro Tools | HD that I need to buy?
Thanks!

IC
> On 19 Sep 2017, at 21:43, Slau Halatyn <slauhala...@gmail.com> wrote:
> 
> Hi Ignasi,
> 
> I'm not sure exactly what you mean by crossfades specifically designed for 
> piano or classical music in general (you didn't exactly specify) but I can 
> assure you that no platform is more widely used than Pro Tools. Also, it 
> happens to be extremely accessible, especially for purposes as you've 
> described. If your application is to record, edit and mix piano, the good 
> news is that you won't necessarily need to use a control surface because your 
> fader levels will largely be static so that'll save a bit on the cost. As 
> Brian mentioned, you can essentially rent Pro Tools for a limited time. I 
> would highly recommend getting an annual subscription and you can take some 
> time to become acquainted with the editing facility. There are a ton of 
> keyboard shortcuts and Pro Tools excels on the editing front.
> 
> When you mention several tracks, do you mean that you're using two or three 
> pairs of mics for capturing the audio? Which interface have you been using 
> thus far?
> Best,
> Slau
> 
>> On Sep 19, 2017, at 1:51 PM, Ignasi Cambra <ignasicam...@gmail.com> wrote:
>> 
>> Hello all,
>> First of all I would like to apologize as I’m sure every once in a while 
>> people send emails to this list with this type of questions. I will try and 
>> be as brief as I can.
>> 
>> I am a classical concert pianist and have a fair amount of recording 
>> equipment at home. I have a nice space with a concert grand, and record 
>> myself often while practicing etc. In classical music the DAW that’s used in 
>> most cases is Sequoia by Magix, which includes certain crossfades 
>> specifically designed for us. Sequoia is not available on the Mac, and is 
>> not accessible on Windows either as far as I know. Knowing that Pro Tools is 
>> probably not the ideal DAw for me I am thinking of purchasing it anyways, 
>> because I understand it’s fully accessible with VoiceOver. Is that correct? 
>> In principle I don’t plan on dealing with huge multitrack projects. My 
>> projects generally include 4-6 tracks, and essentially what I need is a DAW 
>> that will allow me to efficiently edit audio, making extremely precise cuts 
>> at exact points, using crossfades to transition between different takes etc. 
>> Up until now I have been using Reaper for recording, and then I would render 
>> all of my takes to stereo WAV files and use Audacity to make all the edits, 
>> which works surprisingly well. Would I gain a lot by moving to Pro Tools? 
>> Are all of these tasks accessible? Is the latest version of Pro Tools the 
>> best in terms of accessibility with VoiceOver on mac OS?
>> Thanks again, and I’m sorry for my ignorance!
>> 
>> IC
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: A few questions

[Ignasi Cambra]

Hello,
No no, I am a Mac user and own several of them, so I was hoping to use Pro 
Tools with VoiceOver.
What would be the best resource for me to get started? Are the Pro Tools with 
Speech tutorials still the way to go or would you recommend something more 
recent? Weren’t those tutorials recorded on Pro Tools 10?
I would only be mixing and editing acoustic instruments, so would be interested 
in something that touches on those topics rather than Midi related issues.
I will check the Pro Tools site now and see if I can get myself a subscription. 
Thanks for your help!

IC
> On 19 Sep 2017, at 21:24, Brian Casey <br...@wavefieldrecordings.com> wrote:
> 
> Hi Ignasi,
> 
> Firstly your english and questions are perfectly phrased so thank you.
> 
> I think protools will be perfect for you and all the workflow you describe 
> will be both accessible and more simple than how you do things currently. 
> 
> I edit piano and acoustic instruments every day and protools is perfectly 
> capable of doing everything I need it to do, and though I am a professional 
> audio engineer, I would compare my protools skills as intermediate level in 
> comparisan to others on this list. 
> 
> Hpwever protools is only accessible on the apple mac, and yes the latest 
> version is best.
> 
> If you have or can borrow a mac computer you can always subscribe to protools 
> for just a month for relatively little money and see how you like it.
> 
> Hope this helps,
> Brian 
> 
> Sent from my smart-ish phone!
> 
>> On 19/09/2017, at 6:51 PM, Ignasi Cambra <ignasicam...@gmail.com> wrote:
>> 
>> Hello all,
>> First of all I would like to apologize as I’m sure every once in a while 
>> people send emails to this list with this type of questions. I will try and 
>> be as brief as I can.
>> 
>> I am a classical concert pianist and have a fair amount of recording 
>> equipment at home. I have a nice space with a concert grand, and record 
>> myself often while practicing etc. In classical music the DAW that’s used in 
>> most cases is Sequoia by Magix, which includes certain crossfades 
>> specifically designed for us. Sequoia is not available on the Mac, and is 
>> not accessible on Windows either as far as I know. Knowing that Pro Tools is 
>> probably not the ideal DAw for me I am thinking of purchasing it anyways, 
>> because I understand it’s fully accessible with VoiceOver. Is that correct? 
>> In principle I don’t plan on dealing with huge multitrack projects. My 
>> projects generally include 4-6 tracks, and essentially what I need is a DAW 
>> that will allow me to efficiently edit audio, making extremely precise cuts 
>> at exact points, using crossfades to transition between different takes etc. 
>> Up until now I have been using Reaper for recording, and then I would render 
>> all of my takes to stereo WAV files and use Audacity to make all the edits, 
>> which works surprisingly well. Would I gain a lot by moving to Pro Tools? 
>> Are all of these tasks accessible? Is the latest version of Pro Tools the 
>> best in terms of accessibility with VoiceOver on mac OS?
>> Thanks again, and I’m sorry for my ignorance!
>> 
>> IC
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Pro Tools versions

[Ignasi Cambra]

Hello all,
On my quest to get started with PT I’ve been exploring the Avid website, and 
discovered that there are three versions of Pro Tools: Pro Tools | First, Pro 
Tools and Pro Tools | HD. Are all of these programs accessible or only Pro 
Tools | HD? Would Pro Tools | First be enough for me to get started or is it 
extremely limited in terms of what you can do with it?
Thanks again for your help!

IC

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: A few questions

[Ignasi Cambra]

Hello Brian,
Yes, I have been in touch with Slau and he is being incredibly helpful. I may 
consider listening to the ProTools with Speech tutorials at some point, because 
at least I’m sure they’ll give me a better idea of how things work.
I can tell that this list will be an invaluable resource for me to learn Pro 
Tools, so thanks everyone in advance for your help!

IC
> On 20 Sep 2017, at 20:59, Brian@Wavefield Recordings 
> <br...@wavefieldrecordings.com> wrote:
> 
> Hi,
> 
> Sorry as you may guess I replied in a rush to you originally, so
> forgot you had specifically referred to using Voice Over and the mac.
> 
> As Slau recommended in his replies the standard version of Protools
> and not HD or Protools first would be the best starting point in my
> opinion.
> 
> I don't know what features other DAWs could have specific to classical
> music etc, but Protools should be perfectly sufficient in terms of its
> options for cross fading, the ability to tab to transients, even do
> some time stretch stuff etc.
> 
> The protools with speech tutorials helped me get past the block of not
> knowing where to begin, but I never went back to them after an initial
> quick listen and getting my feet wet...however I felt it was worth
> supporting at the time, and it was based on an out of date protools
> version even when I purchased it, however most of the principals
> applied. It is much more focused on editing audio than midi as I
> remember it, so that will suit you just fine.
> 
> I believe Slau has posted some tutorials here, and I haven't listened
> to more than one of them quickly, but he is the best Protools resource
> I have ever come across full stop, and as you may already tell is very
> helpful on list here.
> 
> There is a protools access drop box shared folder, which you can ask
> to be linked to or search the list archives for reference to it and
> Slau's posts on editing.
> 
> The list also has many other fantastic contributors, and I would not
> count myself as one of those, but hopefully my interjections here have
> saved someone else a little typing and presented some of the options
> to you.
> 
> Best of luck,
> Brian.
> 
> On 9/19/17, Ignasi Cambra <ignasicam...@gmail.com> wrote:
>> Hello,
>> No no, I am a Mac user and own several of them, so I was hoping to use Pro
>> Tools with VoiceOver.
>> What would be the best resource for me to get started? Are the Pro Tools
>> with Speech tutorials still the way to go or would you recommend something
>> more recent? Weren’t those tutorials recorded on Pro Tools 10?
>> I would only be mixing and editing acoustic instruments, so would be
>> interested in something that touches on those topics rather than Midi
>> related issues.
>> I will check the Pro Tools site now and see if I can get myself a
>> subscription. Thanks for your help!
>> 
>> IC
>>> On 19 Sep 2017, at 21:24, Brian Casey <br...@wavefieldrecordings.com>
>>> wrote:
>>> 
>>> Hi Ignasi,
>>> 
>>> Firstly your english and questions are perfectly phrased so thank you.
>>> 
>>> I think protools will be perfect for you and all the workflow you describe
>>> will be both accessible and more simple than how you do things currently.
>>> 
>>> 
>>> I edit piano and acoustic instruments every day and protools is perfectly
>>> capable of doing everything I need it to do, and though I am a
>>> professional audio engineer, I would compare my protools skills as
>>> intermediate level in comparisan to others on this list.
>>> 
>>> Hpwever protools is only accessible on the apple mac, and yes the latest
>>> version is best.
>>> 
>>> If you have or can borrow a mac computer you can always subscribe to
>>> protools for just a month for relatively little money and see how you like
>>> it.
>>> 
>>> Hope this helps,
>>> Brian
>>> 
>>> Sent from my smart-ish phone!
>>> 
>>>> On 19/09/2017, at 6:51 PM, Ignasi Cambra <ignasicam...@gmail.com> wrote:
>>>> 
>>>> Hello all,
>>>> First of all I would like to apologize as I’m sure every once in a while
>>>> people send emails to this list with this type of questions. I will try
>>>> and be as brief as I can.
>>>> 
>>>> I am a classical concert pianist and have a fair amount of recording
>>>> equipment at home. I have a nice space with a concert grand, and record
>>>> myself often while practicing etc. In classical music the DAW that’s used
>>>> in most cases is Sequoia b

A few questions

[Ignasi Cambra]

Hello all,
First of all I would like to apologize as I’m sure every once in a while people 
send emails to this list with this type of questions. I will try and be as 
brief as I can.

I am a classical concert pianist and have a fair amount of recording equipment 
at home. I have a nice space with a concert grand, and record myself often 
while practicing etc. In classical music the DAW that’s used in most cases is 
Sequoia by Magix, which includes certain crossfades specifically designed for 
us. Sequoia is not available on the Mac, and is not accessible on Windows 
either as far as I know. Knowing that Pro Tools is probably not the ideal DAw 
for me I am thinking of purchasing it anyways, because I understand it’s fully 
accessible with VoiceOver. Is that correct? In principle I don’t plan on 
dealing with huge multitrack projects. My projects generally include 4-6 
tracks, and essentially what I need is a DAW that will allow me to efficiently 
edit audio, making extremely precise cuts at exact points, using crossfades to 
transition between different takes etc. Up until now I have been using Reaper 
for recording, and then I would render all of my takes to stereo WAV files and 
use Audacity to make all the edits, which works surprisingly well. Would I gain 
a lot by moving to Pro Tools? Are all of these tasks accessible? Is the latest 
version of Pro Tools the best in terms of accessibility with VoiceOver on mac 
OS?
Thanks again, and I’m sorry for my ignorance!

IC

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: App for cutting audio files

[Ignasi Cambra]

But why can’t you just get rid of the silence before bouncing the project out 
of ProTools? Otherwise a great option is Audacity. It works great for that kind 
of simple editing, and is completely free. Be careful though, because as far as 
I remember the latest version does not work with VoiceOver. On their website 
they tell you which version is accessible, so you should download that one.
Amadeus Pro is also great and very accessible, but you will have to pay for it.

Sent from my iPhone

> On 29 Sep 2017, at 11:06, Martin (Punky) Sopart  wrote:
> 
> Hello John André!
> 
> Thanks for your fast response.
> I'll try "Fission".
> 
> Best! / Martin
>> -Original Message-
>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com]
>> On Behalf Of John André Lium-Netland
>> Sent: Friday, September 29, 2017 10:42 AM
>> To: PT access group 
>> Subject: Re: App for cutting audio files
>> 
>> You might try Fission, it’s VoiceOver friendly and cheap.
>> 
>> Best,
>> John André
>> 
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Import problem

[Ignasi Cambra]

Hey Niklas,
Most likely the problem is that you have updated your system to Mac OS High 
Sierra. In any case you are using a version of ProTools that’s too old for the 
operating system you are running. I believe Avid hasn’t officially approved 
High Sierra yet, but if you update to the latest ProTools version (12.8.2) 
things should mostly work fine. If you are not on High Sierra I would still 
recommend that you update ProTools, which will most likely solve the issue.
Best,

IC

Sent from my iPhone

> On 2 Dec 2017, at 12:39, Niklas Karlsson  wrote:
> 
> Hi all,
>  
> Hope all is great!
>  
> I recently started working on a session in which I want to import an audio 
> file.
> But when I press CMD-Shift-I to bring up the import audio dialog, the 
> following message appears:
> Could not complete the Import Audio command because Assertion in 
> "/Volumes/Development/200028/ProTools/NewFileLibs/Cfd/MacOS/Cfd_ImportAudioDialogMacOS.mm",
>  line 603.
>  
> (Use the Copy button to copy this message to the clipboard.) 
> 
>  
> Importing audio has worked fine before and I have no idea why PT suddendly 
> shows this.
> I’ve tried to manually reinstall PT but the same message appears anyway.
>  
> If someone has any idea on how to solve this problem I would greatly 
> appreciate it!
>  
> Thanks in advance!
>  
> All the best!
>  
> Niklas
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: cd burning on mac

[Ignasi Cambra]

You can also use a little app called Burn. Just do a Google search for Burn Mac 
and you will find it. Very accessible, free, and works great.

Sent from my iPhone

> On 20 Nov 2017, at 11:31, Martin (Punky) Sopart  wrote:
> 
> Hi Chuck!
> 
> Searching for "wave burner" and "Mac" brings no useful results.
> Any further informations?
> 
> Thanks and best! / Martin
>> -Original Message-
>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com]
>> On Behalf Of Slau Halatyn
>> Sent: Saturday, July 2, 2016 9:08 PM
>> To: ptaccess@googlegroups.com
>> Subject: Re: cd burning on mac
>> 
>> Hi Steve,
>> 
>> You have to add a song to the library in order to add it to a playlist but 
>> two
>> things to consider would be that, first, you don't have to have iTunes copy
>> the song to your media folder and, second, you can have multiple libraries so
>> you won't have to clutter your personal library.
>> Hope that helps,
>> Slau
>> 
>> On Jul 2, 2016, at 3:05 PM, Steve Sparrow >  > wrote:
>> 
>> 
>>hey chuck and keith. if you make a new play list in iTunes. are you
>> saying you can copy wave files to it and burn them without adding them to
>> the iTunes library first. If so i did not know you could do this with 
>> iTunes. not
>> bad if it works this way.
>>.
>>Steve
>> 
>> 
>>p.s. sorry about this thread being off topic.
>> 
>> 
>>On 3 Jul 2016, at 4:50 AM, CHUCK REICHEL
>> >  > wrote:
>> 
>>Hi Steve,
>>You can do it with itunes its just a bit more moves.
>>What I do when I want to use itunes is to make a new playlist
>> and copy and paste the wav files in to that play list and burn it.
>>Just choose the options for the burn.
>>After the burn I go back and delete the files from the hd and
>> also delete the play list files.
>>More steps but it gets the job done.
>>I use "wave Burner" 98% of the time though.
>>YMMV
>>Chuck
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>>CHUCK REICHEL
>>soundpicturerecord...@gmail.com
>> 
>>www.SoundPictureRecording.com
>> 
>>954-742-0019
>>Isaiah 26 : 3
>> Thou wilt keep him in perfect peace, whose mind is stayed
>> on thee: because he trusteth in thee.
>> 
>>In GOD I Trust
>> 
>>On Jul 2, 2016, at 2:31 PM, Steve Sparrow wrote:
>> 
>> 
>>Hi Keith. I’ve found iTunes good for burning
>> something that exists in the iTunes library. But unless i’ve got this wrong 
>> you
>> have to add all your tracks to the iTunes library before you can burn them.
>> Most of what i want to burn are wav files i’ve created here in the studio. If
>> iTunes can do this job, i’d be interested to use it. But i didn’t think it 
>> did.
>> Playing around with simply burns at the moment.
>>Steve
>> 
>> 
>> 
>>On 3 Jul 2016, at 3:09 AM, Keith Reedy
>>  > wrote:
>> 
>> 
>> 
>>Steve,
>> 
>> 
>> 
>>Maybe I am missing something here but I just
>> burn a cd from iTunes.  This has worked well for me.
>> 
>> 
>>kr
>> 
>> 
>>We print the Bible in Braille,
>> 
>> 
>>http://biblesfortheblind.org
>> 
>> 
>> 
>>Keith Reedy
>> 
>> 
>>God gives His best to those who leave the
>> choice with Him.  J Hudson Taylor.
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>>On Jul 2, 2016, at 12:32 AM, Steve Sparrow
>>  >
>> wrote:
>> 
>> 
>> 
>>Hey Chris. is that what you use there. .
>> I’ll certainly check it out if you find it works well.
>> 
>> 
>>Thanks for the tip.
>> 
>> 
>>Steve
>> 
>> 
>> 
>>On 2 Jul 2016, at 1:50 PM, Christopher-
>> Mark Gilland  >
>> wrote:
>> 
>> 
>> 
>>How about this.  Could  you maybe try
>> Simplyburns?  It's totally free, and does wonderfully.  It's not in the app
>> store, so you'll have to Google for it, but it's totally free, and is 100%
>> accessible.
>> 
>> 
>>---
>> 
>> 
>>Christopher Gilland
>> 
>> 
>>JAWS Certified, 2016.
>> 
>> 
>>Training Instructor.
>> 
>> 
>> 
>>clgillan...@gmail.com
>> 
>> 
>> 
>>Phone: (704) 256-8010.
>> 
>> 
>>- Original Message - From:
>> "Steve Sparrow" >  >
>> 
>> 
>>To: "'Joy Bausch' via Pro 

Re: CD burning re-visited

[Ignasi Cambra]

I did mention burn on that thread a few weeks ago. It’s very accessible and 
works great, even for creating DVDs with menus. Someone said that it can’t be 
used with several CD drives if you have more than one but I don’t know about 
that. I think for most people it’s a good option.

Sent from my iPhone

> On 12 Dec 2017, at 16:29, Slau Halatyn  wrote:
> 
> Not sure if this was the one mentioned but, Burn is or at least has been 
> accessible:
> http://burn-osx.sourceforge.net
> Seems to still launch on Sierra. Maybe worth a look.
> Slau
> 
>> On Dec 12, 2017, at 10:03 AM, Peter Bosher  
>> wrote:
>> 
>> Hi All,
>> 
>> 
>> A few weeks back there was a thread about accessible CD-burning Mac 
>> software.   One of the recommendations was 'Simply Burns', but the download 
>> I find dates from 2009 and won't immediately install because it's 
>> unidentified by Apple.  Is that the right one do you think?  And What was 
>> the alternative one called? A download website would be great.
>> 
>> 
>> Best,
>> 
>> 
>> Peter
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Flotools and Protools question

[Ignasi Cambra]

You can leave macOS in whatever language you want. That shouldn’t be a problem.

Sent from my iPhone

> On 18 Feb 2018, at 16:26, Christian <christia...@runbox.com> wrote:
> 
> Hi,
> 
> I will use Protools in English, but I was referring to the display language 
> of my Mac OS. I have however added English US as an input source.
> 
> Best regards and thanks,
> Christian
> 
>> 18 feb. 2018 kl. 14:12 skrev Ignasi Cambra <ignasicam...@gmail.com>:
>> 
>> If I were you I would stick to the English version of Pro Tools, if that’s 
>> what you mean by display language. It’s OK if your operating system is in a 
>> language other than English, but I think using Flo Tools with ProTools in a 
>> different language will give you trouble.
>> 
>> Sent from my iPhone
>> 
>>> On 18 Feb 2018, at 13:11, Slau Halatyn <slauhala...@gmail.com> wrote:
>>> 
>>> By default, tracks are set to medium height when they're created. If you 
>>> need to change or verify that tracks are set to the same height,navigate to 
>>> a track in the Edit window (not in the Track List table but in the main 
>>> part of the window). Interact with the track and use the track options 
>>> button to pop up a menu which contains track height as a sub menu. 
>>> Depending on the track height to begin with, track height might be at the 
>>> top layer or within a sub menu. If you want to apply the track height to 
>>> all tracks, use the Flo Mouse Option-click to get into the menu and select 
>>> the height.
>>> Regarding keyboard language versus display language, other users might 
>>> chime in.
>>> HTH,
>>> Slau
>>> 
>>>> On Feb 17, 2018, at 8:09 PM, Christian <christia...@runbox.com> wrote:
>>>> 
>>>> Hi all,
>>>> 
>>>> OK, so I’ve finally installed Flotools and Protools 2018 but I have a 
>>>> question.
>>>> Where do I set track heights to medium?
>>>> And at last, if my display language is not set to English US, but my 
>>>> keyboard is set to it, is that fine or should the display language also be 
>>>> set?
>>>> 
>>>> Many thanks,
>>>> Christian
>>>> 
>>>> -- 
>>>> You received this message because you are subscribed to the Google Groups 
>>>> "Pro Tools Accessibility" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>>> email to ptaccess+unsubscr...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/d/optout.
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Flotools and Protools question

[Ignasi Cambra]

If I were you I would stick to the English version of Pro Tools, if that’s what 
you mean by display language. It’s OK if your operating system is in a language 
other than English, but I think using Flo Tools with ProTools in a different 
language will give you trouble.

Sent from my iPhone

> On 18 Feb 2018, at 13:11, Slau Halatyn  wrote:
> 
> By default, tracks are set to medium height when they're created. If you need 
> to change or verify that tracks are set to the same height,navigate to a 
> track in the Edit window (not in the Track List table but in the main part of 
> the window). Interact with the track and use the track options button to pop 
> up a menu which contains track height as a sub menu. Depending on the track 
> height to begin with, track height might be at the top layer or within a sub 
> menu. If you want to apply the track height to all tracks, use the Flo Mouse 
> Option-click to get into the menu and select the height.
> Regarding keyboard language versus display language, other users might chime 
> in.
> HTH,
> Slau
> 
>> On Feb 17, 2018, at 8:09 PM, Christian  wrote:
>> 
>> Hi all,
>> 
>> OK, so I’ve finally installed Flotools and Protools 2018 but I have a 
>> question.
>> Where do I set track heights to medium?
>> And at last, if my display language is not set to English US, but my 
>> keyboard is set to it, is that fine or should the display language also be 
>> set?
>> 
>> Many thanks,
>> Christian
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Strange Cuts while editing small pieces

[Ignasi Cambra]

Hello,
Excuse me if I’m wrong here, as I am traveling and maybe I have my ProTools 
keyboard commands mixed up. If you want to move the right selection boundary 
you would use cmd shift + and -, not cmd + and -. Same applies to the left 
selection boundary: you would use option shift + and -, not option + and -. The 
commands that you are trying to use trim whatever clip you have selected, which 
is why you say you are losing audio. If you want to use them you can create 
edits at the beginning and end of your selection to end up with a clip that 
contains the audio you actually want to work on, and if you have that new clip 
selected you should be able to do things the way you were describing. Hope this 
helps!

Sent from my iPhone

> On 28 Jul 2018, at 21:59, Ramy Moustafa  wrote:
> 
> Hi all:
> 
> I noticed a strange thing that appeared from some days.
> when am using my down and up arrows to make small selection while editing 
> audio.
> sometimes my track is selected, the timeline and edit selection are linked,, 
> but when am using the Option plus and minus, cmd plus and minus, it start 
> making small cuts in my previous or next audio piece, and the out marker 
> disappear, i must put it again  with the up arrow. do not know why this. but 
> if i need to delete small thing at the end of an audio piece, using option 
> minus cuts my audio.
> what am missing here?
> Thanks in advance 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Strange Cuts while editing small pieces

[Ignasi Cambra]

Right! I thought he was trying to extend or reduce the selection range, since 
he was complaining that without using the shift key he was losing some audio.

Sent from my iPhone

> On 29 Jul 2018, at 00:02, Slau Halatyn  wrote:
> 
> Adding Shift will extend the selection rather than a clip. Now, if Ramy meant 
> he wanted to change the range, well, then yes, Shift would be added to the 
> Option or Command modifiers.
>> On Jul 28, 2018, at 11:53 PM, Ignasi Cambra  wrote:
>> 
>> Hello,
>> Excuse me if I’m wrong here, as I am traveling and maybe I have my ProTools 
>> keyboard commands mixed up. If you want to move the right selection boundary 
>> you would use cmd shift + and -, not cmd + and -. Same applies to the left 
>> selection boundary: you would use option shift + and -, not option + and -. 
>> The commands that you are trying to use trim whatever clip you have 
>> selected, which is why you say you are losing audio. If you want to use them 
>> you can create edits at the beginning and end of your selection to end up 
>> with a clip that contains the audio you actually want to work on, and if you 
>> have that new clip selected you should be able to do things the way you were 
>> describing. Hope this helps!
>> 
>> Sent from my iPhone
>> 
>>> On 28 Jul 2018, at 21:59, Ramy Moustafa  wrote:
>>> 
>>> Hi all:
>>> 
>>> I noticed a strange thing that appeared from some days.
>>> when am using my down and up arrows to make small selection while editing 
>>> audio.
>>> sometimes my track is selected, the timeline and edit selection are 
>>> linked,, but when am using the Option plus and minus, cmd plus and minus, 
>>> it start making small cuts in my previous or next audio piece, and the out 
>>> marker disappear, i must put it again  with the up arrow. do not know why 
>>> this. but if i need to delete small thing at the end of an audio piece, 
>>> using option minus cuts my audio.
>>> what am missing here?
>>> Thanks in advance 
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: deleting selection does nothing

[Ignasi Cambra]

If you have only one track in the session you can also interact with the tracks 
table and select it from there. If you are having this issue and it looks like 
the track is selected just press Vo space to unselect it, and then Vo space to 
select it again. This should fix the problem without having to add another 
track. At least that’s the way I do it.

Sent from my iPhone

> On 22 Jul 2018, at 23:14, John Covici  wrote:
> 
> I wonder what makes the insertion cursor leave the track, but I have
> seen this once in a while and I am glad to know the way to fix it.
> 
> On Sun, 22 Jul 2018 19:56:29 -0400,
> Slau Halatyn wrote:
>> 
>> Glad that worked. Keep in mind that, regardless of whether a track appears 
>> to be selected, sometimes, after certain operations, the insertion cursor 
>> disappears and the surefire way to get it back (assuming all other settings 
>> have been set at the outset), is to use the shortcuts for moving the track 
>> selection away and back to the track. cheers,
>> slau
>> 
>>> On Jul 22, 2018, at 6:21 PM, John Covici  wrote:
>>> 
>>> Yep, that did it, I sometimes am using just one track, but this is
>>> fine -- thanks so much!
>>> 
>>> On Sun, 22 Jul 2018 14:57:29 -0400,
>>> Slau Halatyn wrote:
 
 Your insertion cursor is not in the track. Make sure you have another 
 audio track adjacent to the one you're trying to edit and move the 
 selection to that track with either Control+semicolon or Control+p and 
 move it back to the original track, then delete the waveform. BTW, the 
 edit tools don't matter because you're only using keyboard commands for 
 the insertion cursor. Edit tools only matter when you're using the mouse 
 pointer and clicking within the clips themselves.
 
> On Jul 22, 2018, at 2:56 AM, John Covici  wrote:
> 
> Hi.  I have a problem which happens sometimesand I have no idea how to
> fix.  I had a selection on a track, pressed the baackspace, but the
> audio from the selection is still there,  I can undo the clear command
> in the edit menu.  I have shuffle mode selected, smart tool selected,
> track says waveform view.  I need help -- what am I doing wrong here?
> 
> Thanks in advance for any suggestions.
> 
> -- 
> Your life is like a penny.  You're going to lose it.  The question is:
> How do
> you spend it?
> 
>   John Covici wb2una
>   cov...@ccs.covici.com
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
 
 -- 
 You received this message because you are subscribed to the Google Groups 
 "Pro Tools Accessibility" group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to ptaccess+unsubscr...@googlegroups.com.
 For more options, visit https://groups.google.com/d/optout.
 
>>> 
>>> -- 
>>> Your life is like a penny.  You're going to lose it.  The question is:
>>> How do
>>> you spend it?
>>> 
>>>John Covici wb2una
>>>cov...@ccs.covici.com
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>> 
> 
> -- 
> Your life is like a penny.  You're going to lose it.  The question is:
> How do
> you spend it?
> 
> John Covici wb2una
> cov...@ccs.covici.com
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: FloTools inspecter problem

[Ignasi Cambra]

To activate the inspector you need to use the regular / key, which is to the 
left of the right shift key on American keyboards.

Sent from my iPhone

> On 12 Jul 2018, at 10:23, Niklas Karlsson  
> wrote:
> 
> Hi all,
>  
> I’ve recently started using FloTools and I’m having a little problem with the 
> inspecter, it doesn’t activate when I press the numeric / key.
> All other commands in PT that requires the numeric keypad works fine, as well 
> as the other FloTools commands.
>  
> I thought it might have something to do with my keyboard.
> I’m running the swedish version of Mac OS, but to be safe I changed the 
> keyboard layout to USA in System Preferences, but it still doesn’t work.
>  
> Any ideas? 
>  
> Best,
> Niklas
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: SV: FloTools inspecter problem

[Ignasi Cambra]

No problem. In any case you may want to keep your keyboard on the English US 
layout when using Flo Tools as you have been doing. It will save you some 
headaches.

Sent from my iPhone

> On 12 Jul 2018, at 10:41, Niklas Karlsson  
> wrote:
> 
> Oh, thank you so much!
> Excuse the stupid swede! 
>  
> All the best,
> Niklas
>  
> Från: ptaccess@googlegroups.com  För Ignasi Cambra
> Skickat: den 12 juli 2018 10:34
> Till: ptaccess@googlegroups.com
> Ämne: Re: FloTools inspecter problem
>  
> To activate the inspector you need to use the regular / key, which is to the 
> left of the right shift key on American keyboards.
> 
> Sent from my iPhone
> 
> On 12 Jul 2018, at 10:23, Niklas Karlsson  
> wrote:
> 
> Hi all,
>  
> I’ve recently started using FloTools and I’m having a little problem with the 
> inspecter, it doesn’t activate when I press the numeric / key.
> All other commands in PT that requires the numeric keypad works fine, as well 
> as the other FloTools commands.
>  
> I thought it might have something to do with my keyboard.
> I’m running the swedish version of Mac OS, but to be safe I changed the 
> keyboard layout to USA in System Preferences, but it still doesn’t work.
>  
> Any ideas? 
>  
> Best,
> Niklas
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Problem with edit selections

[Ignasi Cambra]

Pressing enter should take you back to the beginning of the project and clear 
the selection, but another way of doing this is to just press the down or up 
arrow again. If you press the down arrow the selection will be cleared and your 
edit cursor will be right where the beginning of the selection used to be. Same 
for the up arrow. Hope it helps!

Sent from my iPhone

> On 12 Apr 2018, at 21:20, Alex Coleman  wrote:
> 
> I've

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Forgot keystroke to select to end of track

[Ignasi Cambra]

Shift + enter!

Sent from my iPhone

> On 13 Apr 2018, at 20:08, Nathaniel Kile  wrote:
> 
> Hello gentleman,
> Thank you very much. Now, what is the convers? What keystroke to select to 
> the beginning?
> 
> 
> Regards,
> Nate Kile,
> Assistive Technology Instructor, Tech Vision 
> Specialist in Technology/Training/Teaching for blind/low vision/virtual 
> instruction for schools
> Also Private training to your needs
> 907-444-3707
> Website with hundreds of informational articles & lessons on PC, Office 
> products, Mac, iPad/iTools and more, all done with keystrokes: 
> www.yourtechvision.com 
> 
> 
> -Original Message-
> From: ptaccess@googlegroups.com  On Behalf Of John 
> Gunn
> Sent: Thursday, April 12, 2018 6:36 PM
> To: ptaccess@googlegroups.com
> Subject: Re: Forgot keystroke to select to end of track
> 
> Actually drop the insertion point, then shift-option-return.
> 
> 
>> On Apr 12, 2018, at 8:22 PM, Alex Coleman  
>> wrote:
>> 
>> Option plus return should do the trick.
>> 
>> Sent from my iPhone
>> 
>>> On Apr 12, 2018, at 9:05 PM, Nathaniel Kile  wrote:
>>> 
>>> Hello,
>>> Sorry, dusting off the rig and I forgot the keystroke to select from 
>>> selection point to the end of recording.
>>> Any tips would be appreciated. 
>>> 
>>> 
>>> 
>>> Nate Kile,
>>> Assistive Technology Instructor, Tech Vision Specialist in 
>>> Technology/Training/Teaching for blind/low vision/virtual instruction 
>>> for schools Also Private training to your needs
>>> 907-444-3707
>>> Website with hundreds of informational articles & lessons on PC, 
>>> Office products, Mac, iPad/iTools and more, all done with keystrokes: 
>>> www.yourtechvision.com
>>> 
>>> 
>>> 
>>> --
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> --
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> --
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Just for a very simple audio tasks, another alternative?

[Ignasi Cambra]

I normally use Amadeus Pro for that kind of thing and it works great. You can 
also use Audacity, which is free.

Sent from my iPhone

> On 11 Dec 2018, at 09:46, Ramy Moustafa  wrote:
> 
> Hi all:
> 
> Sometimes, i have some audio tracks, which i need just to convert them from 
> wave to mp3, make Fades, etc.
> Am searching for a simple app to do this? i can use the Protools of corse, 
> but is there an easy  app to do the task?
> I  installed the Amadeos Lite, but can not use it at all.
> ANy help will be highly Appreciated.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Just for a very simple audio tasks, another alternative?

[Ignasi Cambra]

Yes it will do the same things but as far as I remember you need to make sure 
to download the accessible version, which is not the current version. Maybe 
things have changed now but I haven’t checked for at least a year.

Sent from my iPhone

> On 11 Dec 2018, at 13:03, Ramy Moustafa  wrote:
> 
> Ok, Thanks so much.
> will give it another try. but what about Audacity, is it better? and will it 
> do the same things?
> 
>> On Dec 11, 2018, at 12:05 PM, Ignasi Cambra  wrote:
>> 
>> I normally use Amadeus Pro for that kind of thing and it works great. You 
>> can also use Audacity, which is free.
>> 
>> Sent from my iPhone
>> 
>>> On 11 Dec 2018, at 09:46, Ramy Moustafa  wrote:
>>> 
>>> Hi all:
>>> 
>>> Sometimes, i have some audio tracks, which i need just to convert them from 
>>> wave to mp3, make Fades, etc.
>>> Am searching for a simple app to do this? i can use the Protools of corse, 
>>> but is there an easy  app to do the task?
>>> I  installed the Amadeos Lite, but can not use it at all.
>>> ANy help will be highly Appreciated.
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Reading The volume not the level meeter?

[Ignasi Cambra]

With the FloTools inspector on pressing V ones on a track reads the volume. 
Pressing V twice puts it back to 0 DB.

Sent from my iPhone

> On 26 Jan 2019, at 18:25, Ramy Moustafa  wrote:
> 
> Hi all:
> 
> is there a short cut that am missing can act like pressing the Letter L twice 
> to read the Volume?
> In the audio drama, i need to make some volume automation, but sometimes my 
> ear forgets the actual volume, so, is there a quick way to make the hole 
> track in the same volume all the time? i will make some volume automation, 
> but need to read the volume now to see if am i righ  or am more than the 
> actual volume
> 
> Thanks in advance 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: iZotope Ozone 9 VoiceOver Accessibility in Pro Tools?

[Ignasi Cambra]

Yes, parameters show up as expected and you can adjust them with VoiceOver, so 
I don't see why you couldn't use fader flip on your control surface. As for 
master assistant you can't access it at all unless you install VOCR, which is 
useful for all sorts of things anyways.

Thanks,

Ignasi

Sent from my iPhone

> On 18 Jun 2020, at 18:09, CHUCK REICHEL  
> wrote:
> 
> Hi Ignasi,
> 
> Thanks for the Advanced version heads up.
> So your saying, All the automation parameters show when in fader flip, like 
> Waves plugs?
> I don't use VOCR is there anything usable in "master assistant"?
> 
> 
> Thanks
> Chuck
> 
>> On Jun 16, 2020, at 4:25 PM, Ignasi Cambra wrote:
>> 
>> It depends on the modules, but most parameters are visible to automation 
>> which is good for us. features such as master assistant can be used with 
>> VOCR inside of Pro Tools. I would probably recommend the Advanced version 
>> since you get all modules as separate plug-ins besides the main Ozone 
>> plug-in which also contains all of them. This is very useful since adding, 
>> dragging, and removing modules from the chain is not accessible on the main 
>> plug-in.
>> 
>> Sent from my iPhone
>> 
>>>> On 16 Jun 2020, at 19:15, Michael Holmes  
>>>> wrote:
>>>> 
>>> 
>>> I can say based on their Elements plugins that accessibility in the PT 
>>> plugin window is on par with Waves. If you don’t have their software 
>>> manager, you’ll need a sighty to install the package, because it’s not a 
>>> standard Apple installer. On the flip side, the manager software is easier 
>>> to VO than AvidLink, and doesn’t require any sight after running the 
>>> installer. As for their standalone editor apps, they’re 50% accessible. You 
>>> can navigate controls and such, but the controls are geared toward looking 
>>> at the waveform.
>>> 
>>> Not much help on Ozone specifically I know, but thought I’d share my 
>>> experience with the way their software is. Basically a more surgical Waves.
>>> 
>>>>> On Jun 16, 2020, at 12:49, CHUCK REICHEL 
>>>>>  wrote:
>>>>> 
>>>> Hi Guys,
>>>> anybody using iZotope Ozone 9?
>>>> Music Rebalance looks to be a game changer and before proceeding on I 
>>>> wanted to get some feedback from you guys first. :)
>>>> I do have a C|24 that i use for all the Waves and UAD and pt plugs and 
>>>> such so if thats the only way to use "iZotope Ozone 9" let me know?
>>>> Thanks
>>>> Chuck
>>>> 
>>>> 
>>>> -- 
>>>> You received this message because you are subscribed to the Google Groups 
>>>> "Pro Tools Accessibility" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>>> email to ptaccess+unsubscr...@googlegroups.com.
>>>> To view this discussion on the web visit 
>>>> https://groups.google.com/d/msgid/ptaccess/E36861BE-A366-4AE2-A6D2-22527F0F3318%40gmail.com.
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/ptaccess/88652B40-2413-47A5-B20A-0605437D7586%40gmail.com.
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/ptaccess/83A26BAE-C155-4A72-B61D-AB6E418A6389%40gmail.com.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/80797040-BBFC-4EA4-A82F-90D143DA6FA8%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/FC96F3FB-A536-417C-B0A1-1FA06EABFFA8%40gmail.com.

Re: iZotope Ozone 9 VoiceOver Accessibility in Pro Tools?

[Ignasi Cambra]

It depends on the modules, but most parameters are visible to automation which 
is good for us. features such as master assistant can be used with VOCR inside 
of Pro Tools. I would probably recommend the Advanced version since you get all 
modules as separate plug-ins besides the main Ozone plug-in which also contains 
all of them. This is very useful since adding, dragging, and removing modules 
from the chain is not accessible on the main plug-in.

Sent from my iPhone

> On 16 Jun 2020, at 19:15, Michael Holmes  wrote:
> 
> 
> I can say based on their Elements plugins that accessibility in the PT plugin 
> window is on par with Waves. If you don’t have their software manager, you’ll 
> need a sighty to install the package, because it’s not a standard Apple 
> installer. On the flip side, the manager software is easier to VO than 
> AvidLink, and doesn’t require any sight after running the installer. As for 
> their standalone editor apps, they’re 50% accessible. You can navigate 
> controls and such, but the controls are geared toward looking at the waveform.
> 
> Not much help on Ozone specifically I know, but thought I’d share my 
> experience with the way their software is. Basically a more surgical Waves.
> 
>>> On Jun 16, 2020, at 12:49, CHUCK REICHEL  
>>> wrote:
>>> 
>> Hi Guys,
>> anybody using iZotope Ozone 9?
>> Music Rebalance looks to be a game changer and before proceeding on I wanted 
>> to get some feedback from you guys first. :)
>> I do have a C|24 that i use for all the Waves and UAD and pt plugs and such 
>> so if thats the only way to use "iZotope Ozone 9" let me know?
>> Thanks
>> Chuck
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/ptaccess/E36861BE-A366-4AE2-A6D2-22527F0F3318%40gmail.com.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/88652B40-2413-47A5-B20A-0605437D7586%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/83A26BAE-C155-4A72-B61D-AB6E418A6389%40gmail.com.

Re: OT: Finder - Convert Selected Audio Files

[Ignasi Cambra]

I haven't had to do this myself, but I'm pretty shure a good way of getting 
this done would be to use Automator. Have a look at it and let us know how it 
goes!

IC

Sent from my iPhone

> On 9 Nov 2020, at 08:54, Martin (Punky) Sopart  wrote:
> 
> Hello all!
> 
> I want to encode arround 20,000 wave files to alac by using the integrated
> Finder function.
> For locating and selecting them I use the Finder search, starting at the top
> level folder.
> Search criteria: "type is music"
> All files are found and displayed.
> Now I select them by using Command+A.
> After a while I press VO+Shift+M for the contextual menu, but the very last
> item "Convert Selected Audio Files" is missing here.
> 
> Are there any limmitations regarding maximum files or folders?
> 
> Tia! / Martin
> 
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/004201d6b66d%249741ca10%24c5c55e30%24%40cakewalker.de.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/24FD93B3-6D1E-472C-8CC6-B973BC88DDED%40gmail.com.

Re: OT: Finder - Convert Selected Audio Files

[Ignasi Cambra]

Martin,

If I were you I would really give Automator a try. Maybe you think it's 
complicated if you're not used to it, but once you get used to the interface 
it's very, very useful for things like this.

Ignasi

Sent from my iPhone

> On 9 Nov 2020, at 16:51, Martin (Punky) Sopart  wrote:
> 
> I searched for all files with the ending .wav
> Alternatively I searched all music files.
> Both searches gave the same number of files.
> So maybe I have to encode folder by folder ☹ to find the beast.
>> -Original Message-
>> From: ptaccess@googlegroups.com  On
>> Behalf Of Slau Halatyn
>> Sent: Monday, November 9, 2020 4:43 PM
>> To: PTAccess List 
>> Subject: Re: OT: Finder - Convert Selected Audio Files
>> 
>> Hmm, not sure why you're not seeing the encode option in the first place. I
>> just selected 141 files and right-clicked and the encode option was available
>> without even being under the services menu. Not sure what's going on but
>> perhaps one of the selected files is technically not eligible for encoding?
>> Later, much later :)
>> Slau
>> 
>> 
>>> On Nov 9, 2020, at 10:33 AM, Martin (Punky) Sopart 
>> wrote:
>>> 
>>> Hello Slau!
>>> 
>>> The Item in the Finder, Services menu is also missing, when selecting all 
>>> the
>> files.
>>> I think there must be a limmitation...
>>> And the web didn't help 
>>> 
>>> Thanks! / Martin
 -Original Message-
 From: ptaccess@googlegroups.com  On
 Behalf Of Slau Halatyn
 Sent: Monday, November 9, 2020 4:17 PM
 To: PTAccess List 
 Subject: Re: OT: Finder - Convert Selected Audio Files
 
 Hi Martin,
 Sometimes the encode option is buried within the services submenu.
>> Check
 that.
 Slau
 
 
> On Nov 9, 2020, at 2:54 AM, Martin (Punky) Sopart
>> 
 wrote:
> 
> Hello all!
> 
> I want to encode arround 20,000 wave files to alac by using the
>> integrated
> Finder function.
> For locating and selecting them I use the Finder search, starting at the
>> top
> level folder.
> Search criteria: "type is music"
> All files are found and displayed.
> Now I select them by using Command+A.
> After a while I press VO+Shift+M for the contextual menu, but the very
>> last
> item "Convert Selected Audio Files" is missing here.
> 
> Are there any limmitations regarding maximum files or folders?
> 
> Tia! / Martin
> 
> 
> 
> --
> You received this message because you are subscribed to the Google
 Groups "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send
>> an
 email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
 
>> https://groups.google.com/d/msgid/ptaccess/004201d6b66d%249741ca10%2
 4c5c55e30%24%40cakewalker.de.
 
 --
 You received this message because you are subscribed to the Google
>> Groups
 "Pro Tools Accessibility" group.
 To unsubscribe from this group and stop receiving emails from it, send an
 email to ptaccess+unsubscr...@googlegroups.com.
 To view this discussion on the web visit
 https://groups.google.com/d/msgid/ptaccess/A8910E5D-B619-40EF-
>> BBCF-
 B91EE51D6CBE%40gmail.com.
>>> 
>>> --
>>> You received this message because you are subscribed to the Google
>> Groups "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to ptaccess+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/ptaccess/005a01d6b6ad%24a0fb9cd0%2
>> 4e2f2d670%24%40cakewalker.de.
>> 
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to ptaccess+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/ptaccess/DA6125DD-21D6-4AF0-B083-
>> 5E7D0337CA70%40gmail.com.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/005d01d6b6b0%24277cadb0%2476760910%24%40cakewalker.de.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/D9B9050D-C9F4-4CA4-A251-3A21D75472FD%40gmail.com.

Re: Moving tracks from a zoom F6 to ProTools

[Ignasi Cambra]

What's the problem then? If the files are in a hard drive why can't you just 
import them into your session?

Sent from my iPhone

> On 10 May 2021, at 16:01, Terry Nord  wrote:
> 
> Hey guys,
> I have a zoom F6 multi track recorder And I want to know how to move the 
> tracks from  the Sd card that’s in it that’s removable to pro tools to work 
> on them. I should let you know also that the tracks did get moved from  the 
> SD card to a external hard drive that I have for my Mac. If it’s easier to 
> move them from there that’s fine. Thanks in advance, I do appreciate it.
> 
> You can fill your ears with music and your mouth with food, but, music won’t 
> make you fat.
> ternor...@gmail.com
> Sent from my iPhone
> 
> On May 7, 2021, at 5:11 AM, Martin (Punky) Sopart  wrote:
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/A93CF183-B040-4DC9-832A-C64BDE3FB252%40sherbtel.net.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/BA74929B-7DCD-4670-A073-9ADD79D4168F%40gmail.com.

Re: Go to the first clip in a track?

[Ignasi Cambra]

If you have everything set up correctly you just need to select the track, make 
sure you have an insertion point, go to the beginning by pressing return, and 
then press the tab key to go to the first clip, if it’s not at the beginning of 
the session.

Sent from my iPhone

> On 21 May 2021, at 19:05, Juan Pablo Culasso Alonso  
> wrote:
> 
> Hello all, is there a way to go to the first clip of a certain track, if the 
> track begin at min 30 of the session, how to jump directly there?
> Thanks,
> Juan
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/59C0E7D6-2882-41A2-AAF4-C61FC229B3E3%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/A22D3BF5-BF74-4829-ACA1-B4FD71A07BE0%40gmail.com.

Re: About macbook pro with touch bar

[Ignasi Cambra]

I personally don’t like the touch bar. Don’t take me wrong, it’s perfectly 
usable and it works well with VoiceOver, but in my case I found that I never 
used it, and when I did it was mostly as function keys. If I were you I would 
probably wait for a few months and get the next Macbook Pro model, which is 
likely to bring the standard keyboard back, without the touch bar. Physical 
function keys are important for me when using PT, and as much as I do like 
using an external extended keyboard when working at home, I also want to be 
able to work comfortably on the laptop itself.

Hope that helps,

Ignasi

> On Mar 16, 2021, at 2:42 PM, Juan Pablo Culasso Alonso  
> wrote:
> 
> Hello all, my macbook pro died and I am thinking replacing the machine with a 
> new one. Anyone uses the macbook pro with the touch bar? How you manage this. 
> Is usable or for faster tasks you plug an external keyboard?
> Thanks,
> JP
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/AC833807-ECAB-44A7-B6F4-19469B7061C1%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/AB8B0A28-17D3-4C36-9DA8-C0D504ECAE12%40gmail.com.

Re: About macbook pro with touch bar

[Ignasi Cambra]

No, the latest M1 Macbook Pro still comes with a touch bar, but it seems like 
it will be the last one.

> On Mar 16, 2021, at 3:16 PM, John Covici  wrote:
> 
> I use an external keyboard, and I think they have abolished the
> touchbar in the latest Macbooks.  Mine is several years old and has
> it, but its not of that much use.
> 
> 
> On Tue, 16 Mar 2021 09:42:19 -0400,
> Juan Pablo Culasso Alonso wrote:
>> 
>> Hello all, my macbook pro died and I am thinking replacing the machine with 
>> a new one. Anyone uses the macbook pro with the touch bar? How you manage 
>> this. Is usable or for faster tasks you plug an external keyboard?
>> Thanks,
>> JP
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/ptaccess/AC833807-ECAB-44A7-B6F4-19469B7061C1%40gmail.com.
>> 
> 
> -- 
> Your life is like a penny.  You're going to lose it.  The question is:
> How do
> you spend it?
> 
> John Covici wb2una
> cov...@ccs.covici.com
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/m3v99rw5d5.wl-covici%40ccs.covici.com.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/6DCC5678-CAE2-4D7E-8DA2-3DE060A68F8E%40gmail.com.

Re: OT, an incredible stem extraction software

[Ignasi Cambra]

Isn't this software similar to Demucs? I don't know if you've heard Demucs, but 
I doubt it's better than that. I wouldn't be surprised if it were even based on 
it.

Sent from my iPhone

> On 11 Jan 2022, at 10:18, Jean-Philippe Rykiel  wrote:
> 
> 
> It’s limitation is it duration, only five days.
> Jp
> 
> 
> http://www.jprykiel.com
> 
> http://soundcloud.com/ryksounet
> https://www.youtube.com/c/jprykiel
> Http://www.facebook.com/jprykiel
> 
>>> Le 10 janv. 2022 à 22:27, Gordon Kent  a écrit :
>>> 
>> 
>> Well, if it gets you the individual parts separated, you can always do the 
>> processing in reaper itself. I kind of had the feeling that this whole 
>> concept is similar to Miller Diane, perhaps Miller Diane on steroids. It 
>> certainly would be worth a look. I wonder what the limitations of the demo 
>> or.
>> Cordf 
>> 
>>> On Mon, Jan 10, 2022 at 4:48 PM Jean-Philippe Rykiel  
>>> wrote:
>>> Hi Gordon,
>>> I wouldn’t say so. For example Izotop RX is partly accessible, even though 
>>> you cannot draw things, you still can do a lot with its modules and their 
>>> parameters. Same with mellodyne, that is partly accessible on PC, even 
>>> though the user interface changes so much with every new version, but it’s 
>>> really hard for the Scriptures to follow…
>>> As far as  Rip X is concerned, what I understood is that once you import a 
>>> file into it, it divides it into things that look a lot like tracks. And 
>>> they are called Drums, Bass, Vocal, and Guitar and so on. What could be 
>>> less accessible is the processing,  tuning , of ime, of time shifting and 
>>> so on areas of this plug-in. But I’m pretty sure the basics could be 
>>> accessible and we could easily mute or set each of these tracks levels…
>>> Hope someone will try that.
>>> Cheers,
>>> JPR
>>> 
>>> 
>>> http://www.jprykiel.com
>>> 
>>> http://soundcloud.com/ryksounet
>>> https://www.youtube.com/c/jprykiel
>>> Http://www.facebook.com/jprykiel
>>> 
> Le 10 janv. 2022 à 20:34, Gordon Kent  a écrit :
> 
 
>>> 
 Unfortunately, I would imagine that making this software accessible would 
 be next to impossible. I am sure that it relies heavily on isolating 
 specific components in the wave forms of the audio. Being able to identify 
 these components would be very difficult. It is an amazing concept though. 
 We certainly are in very exciting times now as far as audio production is 
 concerned. I work with someone who does enjoy playing around with stuff. 
 I’ll see if he can be interested in checking out the demo.
 Gourd 
 
> On Mon, Jan 10, 2022 at 3:26 PM Jean-Philippe Rykiel  
> wrote:
> Hi Chuck. 
> Unfortunately no, I wish I had. 
> Cheers, 
> JPR 
> 
> http://www.jprykiel.com
> 
> http://soundcloud.com/ryksounet
> https://www.youtube.com/c/jprykiel
> Http://www.facebook.com/jprykiel
> 
>>> Le 10 janv. 2022 à 17:24, Chuck Reichel 
>>>  a écrit :
>>> 
>> Hi Jean-Philippe,
> 
>> 
>> 
>> Where you able to use VoiceOver while testing it?
>> Thanks
>> Chuck
>> 
>> 
 On Jan 10, 2022, at 4:11 AM, Jean-Philippe Rykiel  
 wrote:
 
 Hi friends.
 I still didn’t take the plunge to ProTools, but here is a software  I
 Just experimented  with a sighted person, it’s the most amazing thing 
 I’ve heard in terms of stem extraction from a simple stereo WAV file.
 it does even more than RX Music rebalance module. it’s really amazing. 
 As it’s a small company, I wonder if they would be sensitive to an 
 accessibility request. But just for fun,  listen to the demos 
 
 https://hitnmix.com/
 Enjoy,
 JPR
 
 
 
 
 http://www.jprykiel.com
 
 http://soundcloud.com/ryksounet
 https://www.youtube.com/c/jprykiel
 Http://www.facebook.com/jprykiel
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to ptaccess+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/ptaccess/B5E4DCD5-4375-4483-BD06-04E83CF3B123%40gmail.com.
>> 
>> Chuck Reichel
>> soundpicturerecord...@gmail.com
>> 
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the Google 
>> Groups "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send 
>> an email to ptaccess+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/ptaccess/3B599FBC-E6B0-4A81-B036-DAE7DCEC9AAC%40gmail.com.
> 
> 
> -- 
> You received this 

Re: Numeric keypad absolutely 100 percent required?

[Ignasi Cambra]

Yes, you can perfectly use PT with Chi's Virtual Extended Keyboard which ships 
with Flo Tools. It's very comfortable once you get used to it.

IC

Sent from my iPhone

> On 10 Jun 2022, at 14:44, Christopher Gilland  wrote:
> 
> I absolutely understand completely that my experience would be way way 
> better with a full sized keyboard using a numpad, and that this would be 
> hugely hugely preferred and advised. So let me get that out of the way.
> 
> 
> That said however, is it even remotely possible to navigate and effectively 
> use ProTools without a numpad? I know I'd have to learn the commands, and 
> that they'd be a bit different, and I know about flo numpad, although I 
> really would rather just use native commands if possible, but I'm just 
> curious how many things already are mapped to things on my regular keyboard? 
> Right now, I'm not in a position due to living arrangements where I easily 
> can hook up a full sized keyboard. That may change, but for the time being, I 
> don't have an easy way to do it.
> 
> 
> This is literally speaking the only thing holding me back right now from 
> trying PT again. If you all can assure me that we can work around that, all 
> be it, maybe not the most efficiently, I get that, if we can do it though, 
> then I'll go ahead and call Sweetwater, and see what I can do to reinstate my 
> license. Otherwise, I may have to hold off, but yeah, this is literally the 
> only thing now holding me back.
> 
> 
> Chris.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/023166cb-85a9-fe48-b517-bcae68057c21%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/D7037626-C520-4022-A378-5ABB381AD8C1%40gmail.com.

Re: My profuse apology guys: I got ProTools working

[Ignasi Cambra]

I have often seen these errors when running PT in an unsupported OS. If I had 
to guess I would say that's the problem. Is Ventura officially supported by 
Avid yet?

Sent from my iPhone

> On 15 Mar 2023, at 16:50, Chris Gilland  wrote:
> 
> You wanna know what is really funny, well, OK, not funny, but, interesting 
> about all of this? Look again at the path to the first error message in 
> Martin's response.
> 
> Part of the path says something about "color". What in the world does color 
> have to do with creating a new session?
> 
> This is why I was initially mislead to thinking it was some sort of a flo 
> tools screw up. My logic, no pun intented, of thinking was, OK, color, so, 
> maybe Flo tools is trying to query some sort of colors on the screen, and 
> can't find them for some odd reason, therefore, it's crashing things.
> 
> Anyway, alas, who knows!
> 
> Chris.
> 
>> On Mar 15, 2023, at 12:10 PM, Martin (Punky) Sopart  
>> wrote:
>> 
>> Hello Rocco!
>> 
>> The error:
>> Could not create a new document because Assertion in
>> "/Users/autobld/gitlabci/PT_COLOR/ProTools/App/Misc/UDashboardListView.cpp",
>> line 1189
>> 
>> occurs after the playback engine dialog.
>> 
>> I got that error after backing up and then trashing the prevs.
>> So I restored the prevs and got back the initial situation as follows:
>> 
>> ...
>> I'm running the latest Pro Tools 2022.12 under Ventura 13.2.1.
>> Pro Tools opens without any message or warning and I'm able to create new 
>> sessions.
>> I'm further able to open decent existing sessions without any issue.
>> But when I try to open e.g. the current Pro Tools demo session or some of 
>> mine, the following error appears and I have to restart Pro Tools to be able
>> to open any session again.
>> 
>> Could not complete your request because Assertion in
>> /Users/autobld/gitlabci/PT/release/2022/r4/ProTools/DFW/Views/UGridView.cpp
>> line 2814.
>> 
>> Any ideas where I could start to search?
>> Both of my Macs do behave the same.
>> What does this UGridView.cpp file...
>> 
>> Best! / Martin
>> -Original Message-
>> From: ptaccess@googlegroups.com  On Behalf Of 
>> Rocco Fiorentino
>> Sent: Wednesday, March 15, 2023 3:59 PM
>> To: Pro Tools Accessibility List 
>> Subject: Re: My profuse apology guys: I got ProTools working
>> 
>> Hi Chris and Martin,
>> 
>> I’ve seen this error before when Pro Tools tries to default to an 
>> incorrectly configured playback engine (such as choosing pro tools aggregate 
>> with no devices inside, etc.). Holding down the “n” key while launching Pro 
>> Tools should force you too choose a new playback engine, which should 
>> resolve it.
>> 
 On Mar 15, 2023, at 4:53 AM, Martin (Punky) Sopart  
 wrote:
>>> 
>>> Chris!
>>> 
>>> What did you do to fix it?
>>> Because... After trashing my Pro Tools prefs, I get the error you got.
>>> 
>>> Best! / Martin
>>> -Original Message-
>>> From: ptaccess@googlegroups.com  On Behalf Of 
>>> Chris Gilland
>>> Sent: Wednesday, March 15, 2023 10:48 AM
>>> To: ptaccess@googlegroups.com
>>> Subject: My profuse apology guys: I got ProTools working
>>> 
>>> Boy, this just hasn't been my night!
>>> 
>>> Turns out, I have a few theories why I probably got the error I did, now, I 
>>> can't really speak for the error Martin is getting, but at least for me, I 
>>> think I know what happened, and it shouldn't happen to any of you. It was 
>>> due to something ridiculously stupid I did totally unrelated to ProTools, 
>>> but as a side-effect, it didn't play nicely with the upgrade to 2022.12.
>>> 
>>> I'm just glad I can sleep easy now knowing it's pretty much fixed. I gotta 
>>> reconfigure some things, but whatever. I definitely made this way harder on 
>>> myself than it needed to be, and frankly, I feel like an idiot!
>>> 
>>> Chris.
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/ptaccess/B7284C61-71C3-4C0F-8E8B-4936B0A3F06A%40gmail.com.
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/ptaccess/004801d95723%24fe1aa050%24fa4fe0f0%24%40cakewalker.de.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit 
>>