please, for the final time, remove me from this and all other emails or you
leave me no choice but to report it as spam
best
john
From: Délsio Cabá
Sent: Saturday, March 17, 2012 3:54 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] QMT DNS services - a call
please send me this detail again as I have received too many emails to trawl
through them all
thanks
john
From: Maxwell Smart
Sent: Saturday, March 17, 2012 4:11 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] QMT DNS services - a call for participation
John,
Reading
Please remove me from your email list as I’m not part of this repair
thanks
john
From: rajeshrudramani
Sent: Tuesday, March 13, 2012 10:50 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Re: allowing chkuser in qmail
Hi,
Thanks its working.
Regards
please remove me from this email list as I'm not part of this repair
thanks
john
-Original Message-
From: Eric Shubert
Sent: Tuesday, March 13, 2012 10:45 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: allowing chkuser in qmail
On 03/13/2012 03:28 AM
Hi Eric
I'm not sure this response was for me?
thanks
john
-Original Message-
From: Angus McIntyre
Sent: Friday, March 09, 2012 2:46 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] qmailtoaster and mailman - group mismatch error
On Mar 2, 2012, at 5:52 PM
: Natalio Gatti [mailto:nga...@gmail.com]
Sent: Monday, February 06, 2012 2:47 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Re: Migrating to new server
On Mon, Feb 6, 2012 at 4:53 PM, Eric Shubert
e...@shubes.netmailto:e...@shubes.net wrote:
On 02/06/2012 12:03 PM, John
One of my clients is moving from a Qmailtoaster server (setup by me) to
Exchange 2010 and has tasked me to perform the migration for them. The problem
I am having is that I have to manually change their Outlook settings in order
to switch them to their Exchange accounts. I need to move the
Monday, February 06, 2012 11:50 AM Eric Shubert wrote:
On 02/06/2012 10:21 AM, John Raley wrote:
One of my clients is moving from a Qmailtoaster server (setup by me)
to Exchange 2010 and has tasked me to perform the migration for them.
The problem I am having is that I have to manually
Message-
From: Eric Shubert [mailto:e...@shubes.net]
Sent: Monday, February 06, 2012 10:50 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: Migrating to new server
On 02/06/2012 10:21 AM, John Raley wrote:
One of my clients is moving from a Qmailtoaster server (setup by me
Greetings,
Am planning on moving my current toaster from mysql auth to ldap, has anyone
used this tutorial http://wiki.qmailtoaster.com/index.php/LDAP and
successfully implemented this?
Just looking to hear experiences with this...
Alex
I have been waiting for LDAP integration for a while
I was trying to update with qtp-newmodel and it timed out getting the latest
clamav-toaster but the script continued any way. Now it of course errors and
stops at building the clamav. Is there a way to force it to download it
again? If I run qtp-newmodel it just says it is already downloaded and
On 03/02/2011 10:10 AM, John Raley wrote:
I was trying to update with qtp-newmodel and it timed out getting the
latest clamav-toaster but the script continued any way. Now it of course
errors and stops at building the clamav. Is there a way to force it to
download it again? If I run qtp
-Original Message-
From: Eric Shubert [mailto:e...@shubes.net]
It sounds to me as though you don't have the newest
qmailtoaster-plus package. qtp-newmodel now offers the option
to rebuild packages that are up to date. These 2 commands:
# rpm -Uvh \
://trac.shubes.net/qtp that you identify allowing the script to rebuild
packages as an outstanding enhancement :)
Thanks,
John
I'm guessing that since the variable is commented out, it doesn't exist, so
cannot be changed (We're not real certain about how chkuser
I have a problem with email being rejected from one of our customers. They
do not have reverse DNS setup for their mail server. I have explained to
them why they need that and they are looking into getting it fixed. Until
then, is there a way to whitelist mail coming form them so it passes through
information: http://spf.pobox.com/
And I also used email-t...@qmailtoaster.com with the results:
Here are the spamassassin headers from this server:
No, score=0.6 required=5.0 tests=AWL,DK_POLICY_SIGNALL,
DK_SIGNED,HTML_MESSAGE,RDNS_NONE autolearn=no version=3.2.5
Return path was: John Raley j
?
You might want to generate a new key pair and reinstall them to be
sure.
Or, I believe there's a way to validate that the keys you're using
belong together. I'm not that familiar with openssl off hand to tell
you
how to do that.
John Raley wrote:
I just ran these again today
with ESMTPA; 2 Feb 2010 16:13:17 -
From: John Raley j...@fmcfinance.net
To: 'John Raley' j...@fmcfinance.net
Subject: Domainkeys Test
Date: Tue, 2 Feb 2010 10:12:56 -0600
Message-ID: 004001caa422$94b8c1e0$be2a45...@net
MIME-Version: 1.0
Content-Type: multipart/alternative
-Original Message-
From: Martin Waschbuesch [mailto:mar...@waschbuesch.de]
Sent: Tuesday, February 02, 2010 11:10 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] Domainkeys Problems
John,
Hm, I used the tools on http://domainkeys.sourceforge.net to verify
- Jake Vickers j...@qmailtoaster.com wrote:
John wrote:
When I visit the qmailadmin URL that I've always used I get a 500
internal server error. Error log says
/usr/share/qmailadmin/index.cgi: error while loading shared libraries:
libmysqlclient.so.15: cannot open shared
John wrote:
Ok, dumb. I got the above errors because I was in the directory and the
script removed it. So I cd'd into a safe directory and tried again. Upgrade
of a few packages: qmail-toaster, clamav, and squirrelmail (since that's not
working, either). Upgrades/rebuilds went
), but can't login. I'll have to look at that later, but at
least my priority issue is resolved.
Thanks qmailtoaster-list!
--Will be unsubscribing this email address now that old one works.
John
- Andreas Galatis a...@unet.de wrote:
Hi John,
m...@wir:~ ls -ld /etc/
drwxr-xr-x 85 root root 8192
separately again to see if I can recreate the
white page doesn't reproduce it. Go figure.
John
Then I removed
- Eric Shubert e...@shubes.net wrote:
This sounds to me like your server may be p0wned. IOW, your toaster
might have been cracked/compromised.
John wrote:
Thanks. I just
/usr/share/qmailadmin/index.cgi |grep libmysql shows
libmysqlclient.so.15 = /usr/lib/mysql/libmysqlclient.so.15
(0x005b9000)
Any clues appreciated.
John
-
Qmailtoaster is sponsored by Vickers Consulting
: rliso...@cotterschools.org
To: John Ostrowski johnostrow...@desch.org
User-Agent: SquirrelMail/1.4.17-1.3.13
MIME-Version: 1.0
Content-Type: text/plain;charset=iso-8859-1
Content-Transfer-Encoding: 8bit
X-Priority: 3 (Normal)
Importance: Normal
John Hansen wrote:
Jake,
Are you suggesting that even if I use ezmlm for sending to this many
recipients (over 254) that I'll still receive chkuser errors?
John
Jake Vickers wrote:
Nope. ezmlm does not have the same limitation that chkuser does, since
it directly injects the messages
Am Thursday 24 September 2009 22:41:43 schrieb Jake Vickers:
John Hansen wrote:
Jake,
Are you suggesting that even if I use ezmlm for sending to this many
recipients (over 254) that I'll still receive chkuser errors?
John
Nope. ezmlm does not have the same limitation that chkuser does
/domainkeys/%/private,NOP0FCHECK=1
/et/spamdyke/spamdyke.conf
max-recipients=1000
Thanks,
John
-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers
Steve Huff wrote:
On Sep 24, 2009, at 11:55 AM, John Hansen wrote:
What do I need to change/update in order for these to be sent out
without
errors?
you need to set up an ezmlm mailing list on the toaster and have your
user send mass emails via this list rather than via Outlook. that's
John Hansen
Director of Technology
Cotter Schools
1115 W. Broadway
Winona, MN 55987
507-453-5000
www.cotterschools.org
Steve Huff wrote:
On Sep 24, 2009, at 11:55 AM, John Hansen wrote:
What do I need to change/update in order for these to be sent out
without
errors?
you need to set
Ariel wrote:
I need to get some good webmail, free, to an ISP other than roundcube or
squirrelmail.
for approximately 1000 users
Eric Shubert wrote:
eGroupware has an IMAP client that I hear is rather nice. eGw is much
more than just IMAP though. You could look at horde as well.
That's
need to be aware of?
Thanks,
John
-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
If you need
John Hansen wrote:
One of our users is from Japan, and he is getting this error when he
logs
onto SquirrelMail.
You need to have PHP installed with the multibyte string function
enabled
(using configure option --enable-mbstring). SquirrelMail Notice:
I'm sure he's not the only one
users
and passwords in case someone else would like to use it. It's the same one
posted earlier. Sorry for the confusion. Thanks PakOgah for making the changes.
John
#!/bin/bash
#
# BULK USER ADDING FOR QMAIL TOASTER
#
# Created after I ran into an issue of creating 20,000 users on my toaster
No encrypting necessary. Worked with plain text passwords that were in the file.
John
Eric wrote:
What's the word on how passwords need to be encoded? (Just for
posterity)
John Hansen wrote:
The bulk user script does run as expected. My problem was that the original
script used $PASS
For those that may be interested, here is a script that will delete bulk
users. Modified from the bulk user add script.
John
#!/bin/bash
#
# BULK USER DELETE FOR QMAIL TOASTER
#
# Modified from the Bulk User Adding script that PakOgah
pako...@pala.bo-tak.info
# helped to create with Alex
the script.
So, still looking for the part where the users password is entered by the
script and not manually.
Thanks,
John
-- Original Message ---
From: PakOgah pako...@pala.bo-tak.info
To: John Hansen jhan...@winonacotter.org, qmailtoaster-list@qmailtoaster.com
Sent: Fri, 31
Thanks. I'll try that. What type of encryption should I use?
John
Eric wrote:
If you run
# /home/vpopmail/bin/vadduser
you'll see the various options.
Looks like you need to use the -e flag with a password. This lets
you specify a standard_encrypted_password.
John, you'll need
John Hansen wrote:
Hi PakOgah,
Thanks for modifying the script. However, when I run the script, it asks to
Please enter password for each user, then asks to re-enter the password
for
confirmation, before going onto the next user. A step in the right
direction,
but still would
Ganesh wrote:
Dear John,
Kindly check your /etc/tcprules.d/tcp.smtp and check that
CHKUSER setting. if it is possible then paste your /etc/tcprules.d/tcp.smtp
contain..
Regards,
Ganesh
On Thu, Jul 30, 2009 at 1:27 AM, John Hansen jhan...@winonacotter.orgwrote:
Hi
John Hansen wrote:
Hi,
I'm starting to do some testing on a new install. I set up a couple of
test
accounts and when I log into Squirrelmail and try to send an email from
one
test account to another on the same server in the same domain, I get this
response just after hitting
John Hansen wrote:
Ganesh wrote:
Dear John,
Kindly check your /etc/tcprules.d/tcp.smtp and check that
CHKUSER setting. if it is possible then paste your /etc/tcprules.d/tcp.smtp
contain..
Regards,
Ganesh
On Thu, Jul 30, 2009 at 1:27 AM, John Hansen
jhan
. Server replied:
Unknown response
571 sorry, sender address has invalid format (#5.7.1 - chkuser)
Please advise.
Thanks,
John
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean
John Hansen wrote:
Hi,
I'm starting to do some testing on a new install. I set up a couple of test
accounts and when I log into Squirrelmail and try to send an email from one
test account to another on the same server in the same domain, I get this
response just after hitting
Return to Main Menu
C Turn color on
S Save data
Q Quit
Command 1
The domain name is the suffix at the end of all email addresses. If
for example, your email address is j...@example.com, then your domain
would be example.com.
John
--
This message has been scanned for viruses
/defaultdomain users need to authenticate as
u...@mycompany.com
but with /home/vpopmail/etc/defaultdomain user only need to authenticate as
user
# vi /home/vpopmail/etc/defaultdomain
mycompany.com
John
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department
John Hansen wrote:
In the wiki, it states to disable domainkeys, is this still the case?
Disabling domainkeys
disable domainkeys on qmtiso ver 1.2
somehow in this version domainkeys is still link to qmail
need to disable it
Disabling Domain Keys
Thanks.
You only need
I have converted from mbox to Maildir folders on my old server. I am moving
the folders from my old mail server to my new mail server which is using
Maildir with Qmailtoaster. The problem is my courierimapsubscribed file is
unaware of the non-default folders the users have added themselves. I
Hi,
My current mail system is using mbox, and I'll need to convert to Maildir. Any
recommendations on a good conversion tool?
Thanks,
John
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean
configured.
Thanks,
John
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean.
-
Qmailtoaster is sponsored by Vickers Consulting Group
a process periodically that maps
one schema (probably ldap) on to the other (probably vpopmail). In
that way, you could share authentication data like John is looking to do.
Does this make any sense at all?
It makes sense, but to make a couple points clear at this point in
time, when you
an email client with
POP3.
Does anyone have a recommendation, one way or another, on using QmailToaster
with LDAP?
Pro's and cons?
Tuturial?
Thanks,
John
--
This message has been scanned for viruses and
dangerous content by the Cotter Technology
Department, and is believed to be clean
-1.2.4 is needed by simscan-toaster-1.4.0-1.3.1.x86_64
ripmime-toaster is needed by simscan-toaster-1.4.0-1.3.1.x86_64
error: File not found by glob: /usr/src/redhat/RPMS/x86_64/simscan-toaster*.rpm
Thanks,
John
--
This message has been scanned for viruses and
dangerous content by the Cotter
Jake Vickers wrote:
John Hansen wrote:
Hi,
I'm trying to install QmailToaster on CentOS 5, but I'm running into
installation errors when running the cnt5064-install-script.sh script.
I've
have followed the step by step instructions found on the QmailToaster
wiki for
installing
On Jun 25, 2009, at 10:28 AM, John Hansen wrote:
nroff -man qmail-local.8 qmail-local.0
/bin/sh: nroff: command not found
make: *** [qmail-local.0] Error 127
error: Bad exit status from /var/tmp/rpm-tmp.26371 (%build)
there's your first problem.
$ sudo yum -q provides '*/nroff
On Jun 25, 2009, at 12:12 PM, John Hansen wrote:
error: Failed dependencies:
exim conflicts with qmail-toaster-1.03-1.3.18.x86_64
here is your second problem; you have exim installed. as the error
message says, exim conflicts with qmail-toaster. you need to
uninstall
Installed QMToaster to replace old hand-compiled toaster where email addresses
and domains were stored in a single MYSQL table. All worked but quickly
realized that QMToaster defaults to separate tables for each domain. Rebuilt
vpopmail-toaster-5.4.17 rpm after editing spec in two places:
with
disable-many-domains
John Cole wrote:
Installed QMToaster to replace old hand-compiled toaster where email addresses
and domains were stored in a single MYSQL table. All worked but quickly
realized that QMToaster defaults to separate tables for each domain. Rebuilt
vpopmail-toaster-5.4.17 rpm
with
disable-many-domains
John Cole wrote:
Should be obvious why I'd like to keep the new like the old -- any guesses?
No guesses - I explained what you would need to start with in my last message.
You probably won't find a how-to to do this with QMT, since QMT
he
can be proactive in asking for an updated email address from a user
instead of letting them fall off the list silently.
Thanks,
John
-
QmailToaster hosted by: VR Hosted http://www.vr.org
to modify the file.
spamassassin-toaster-3.1.8-1.3.8
clamav-toaster-0.93-1.3.18
Thanks,
John
-
QmailToaster hosted by: VR Hosted http://www.vr.org
/uninstalls of
packages and I did not initiate this activity. That has me thinking hacker.
I know this is a fruit salad of issues but I'm including them in case
they could be related.
Any advice on how to approach these problems and in what order would be
appreciated.
John
INGLES
Hello list, I hope I can help, I have my server with messages
qmailtoaster but lately it take to get there, and is beginning to get
much spam mails to users who do not exist, and I have reviewed the
following meeting.
ESPAÑOL
hola lista, espero me pueda ayudar, tengo mi servidor con
Thanks Ben. Do I need rDNS entries for each domain name hosted on this
server or just the one for the actual hostname?
John
Ben Mills wrote:
John, You need to have your ISP set your rDNS to emerald.boubion.com .
Many MTAs won't accept messages from foreign hosts that have unresolvable
rDNS
was previously used by spammers. On that subject, I thought rbl
checks were done in real-time?
John
-
QmailToaster hosted by: VR Hosted http://www.vr.org
to train qmailtoaster that an email
is not spam from the command line (I think I read this a while back and
can't find it). If so, what would that syntax look like?
John
-
QmailToaster hosted by: VR Hosted http://www.vr.org
HELLO i have a problem with spam messages,
the problem is that messages of Spam arrive sent from my own dominion to
my own accounts. a virus in some of my clients or my server ?
thansk
-
QmailToaster hosted by: VR Hosted
buenos días para toda la lista, tengo una serie de dudas y no veo como
resolverlas, necesito crear un filtro de mail, he intentado con scripts
de bash y no meda, he intentado con un script en php pero se me ha
dificultado mesclarlo con qmail, con bash ejecuto la siguiente guuion
que pienso
Richard Ramírez escribió:
!DOCTYPE html PUBLIC -//W3C//DTD HTML 4.01 Transitional//EN
html
head
meta content=text/html;charset=ISO-8859-1 http-equiv=Content-Type
/head
body bgcolor=#ff text=#00
Yo teniacute;a el mismo problema, lo que hice fue desactivar esa
opcioacute;n en
Hola alguien me puede explicar como cambio el idioma del squirrelmail, deseo
pasarlo todo a español
Hello somebody the language of the squirrelmail can explain me like change,
desire to pass it everything to Spanish
listas negras de spam y tengo chequeado la opcion
de miy servidor requiere autenticación
Que puedo hacer
Agradezco la ayuda, estoy comenzando con un servidor toaster
Att.
john
...
Update failed. Your network maybe down or none of the mirrors listed in
freshclam.conf check...
can any body advise me how to fix it?
Thanks
John
-
QmailToaster hosted by: VR Hosted http://www.vr.org
I am a newbie when it comes to logwatch. I see the scripts for qmail in
the logwatch directory structure, and logwatch.conf indicates Service =
All. I am not receiving a report section on qmail in the nightly
logwatch emails. How do I enable this?
Thanks,
John
box.
Thanks,
John B
-
QmailToaster hosted by: VR Hosted http://www.vr.org
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL
A M wrote:
that's about right...
spamd+clamd together take about 160MB (60 for spamd + 100 for clamd)
these are about average for my systems.
2007/7/12, John [EMAIL PROTECTED]:
Am running newest Qmailtoaster components, including ClamAV v0.90.1,
which takes 104MB of memory. Any suggestions
,
Eric
-Original Message-
From: John [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 12, 2007 1:21 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] clamd memory hog at 104MB
A M wrote:
that's about right...
spamd+clamd together take about 160MB (60 for spamd + 100
for these kinds of exercises.
After you are done you can use
/usr/bin/ezmlm-list full_path_to_your_list
to verify it works as expected, or
ezmlm-list -n full_path_to_list
which gives the number of subscribers. You don't really want to learn on
a live list...
John
P.s. This manual
after upgrade would be
appreciated.
Thanks,
John
-
QmailToaster hosted by: VR Hosted http://www.vr.org
-
To unsubscribe, e-mail: [EMAIL PROTECTED
Hello, I recently upgraded to CentOS 5 and am rebuilding qmailtoaster.
Will I need to formally recreate users using vaddomain and vadduser or
can I just repopulate the vpopmail database (mysql) using mysql -uroot
-p vpopmail vpopmaildump.sql?
thanks,
john
/vpopmail.mysql according to mysql db itself?
John Carlson wrote:
OK so I was looking around last night at my server.. using webmin and
I was updating some sites.
I wanted to remove a table for an old site in the vpopmail
database well when I deleted the table it actually deleted the
whole
when I ran the RPM it created the database for me again.. and the user
was still there. in mysql.. so I don't think that was the problem.. but
I'm not sure.. I'll try what you have here..
thanks.
Minnesota Webworks
Jake Vickers wrote:
John Carlson wrote:
OK so I was looking around last
seems to give me the error when I have a
correct e-mail address.. otherwise it tells me that I have an incorrect user
.. so something is happening with the password I think..
not sure what it is...
thanks,
Minnesota Webworks
Jake Vickers wrote:
John Carlson wrote:
I believe it is.. I can create
I did notice another thing.. my uid and gid for vpopmail and vchkpw are
both 89.. but in the config.h file in the /home/vpopmail/includes
directory.. the #define VPOPMAILUID 510 and same for VPOPMAILGID .. so
I'm not sure if this is significant
Minnesota Webworks
John Carlson wrote:
ok, I
here is what my /var/log/maillog file sais:
May 22 09:47:14 fergusfalls vpopmail[5923]: vchkpw-pop3: (PLAIN) login
success [EMAIL PROTECTED]:192.168.1.251
May 22 09:47:14 fergusfalls vpopmail[5923]: vchkpw-pop3: autocreate dir
errno 13 /home/vpopmail/domains/fergusfalls.org/john
[EMAIL
you can send through their network in an hour, or the max size of
an email. And don't forget to remind your client to use Bcc: if
appropriate--and it sounds like it is given the large volume they are
sending.
John
PakOgah wrote:
I think it was the environment CHKUSER_RCPTLIMIT on /etc
(besides resource
limitations, which would say a lot about this hosting company)?
Is anybody familiar with this patch or why one would apply it?
-John B
-
QmailToaster hosted by: VR Hosted http://www.vr.org
did you have to uninstall the toaster version of clamav and then just
install the new rpm?
I run on fedora core 6 and I have found the updated rpm for clamav but
will it work with toaster then? I am just wondering.. because I would
also like to update clamav.
thanks for you help in advance
it from the log with the script
which follows. It's not rocket science, but mabye someone else could use
it. Now I backup my list and report the subscriber count each night with
a cron job.
Anybody else had a subscriber list mysteriously wiped?
John B
.. so can't I do that
with qmailtoster..?
thanks,
John
Jake Vickers wrote:
John Carlson wrote:
I want to know if I can just have the messages that bounce be
deleted? because my root account gets just nailed with failure
notices. and it is because of my server receiving remote mail from
non
bounces also
thanks
John
--
the installation.
the only thing I didn't do in the installation is I didn't setup the
djbdns and I didn't add any domain keys. and when I do a qmailctl stat
it doesn't show spamd in there. so I am assuming I need to re set that up.
Jake Vickers wrote:
John Carlson wrote:
I have noticed
the
djbdns and I didn't add any domain keys. and when I do a qmailctl stat
it doesn't show spamd in there. so I am assuming I need to re set that up.
Jake Vickers wrote:
John Carlson wrote:
I have noticed that the spamd service is not running, also I don't
see anything in the maillog about
.. but I don't have problem anymore.
look here... : http://wiki.qmailtoaster.com/index.php/Tcp.smtp
John
Roxanne Sandesara wrote:
I have a user that has been getting messages stating that emails she
has been trying to send are being temporarily rejected by the server:
451 mail server
.. but I don't have problem anymore.
look here... : http://wiki.qmailtoaster.com/index.php/Tcp.smtp
John
Jim Rash wrote:
I have just completed a QT install. No matter what I have tried I
always get the error:
qmail-smtpd: qq soft reject (mail server temporarily rejected message
(#4.3.0
here are my headers from an e-mail I sent my self.. that had just
garbled text in it..
*Return-Path:* [EMAIL PROTECTED]
http://192.168.1.152/webmail/src/compose.php?send_to=john%40mnww.com
*Delivered-To:* [EMAIL PROTECTED]
http://192.168.1.152/webmail/src/compose.php?send_to=john
this is the main machine config files.. I don't know where to set it up
for the specific domain... I assume that this is controlling all mail
coming through the box..
John
I have noticed that the spamd service is not running, also I don't see
anything in the maillog about simscan scanning the mail. also I don't
see anything in the mail headers that shows that it was scanned is there
something wrong.. also I don't see the spamd folder in the supervise
directory
didn't setup the
djbdns and I didn't add any domain keys. and when I do a qmailctl stat
it doesn't show spamd in there. so I am assuming I need to re set that up.
Jake Vickers wrote:
John Carlson wrote:
I have noticed that the spamd service is not running, also I don't
see anything in the maillog
Yes, but what about the Domainkeys variables in tcp.smtp, DKSIGN and
DKVERIFY? Remove those as well or leave them alone?
-John
Bilgehan POYRAZ wrote:
Hi,
This fallow this way to disable domain-keys
cd /var/qmail/bin
ln -sf qmail-queue.orig qmail-queue
And then restart qmail:
qmailctl
--rebuild, then rpm -Uvh?
Thanks,
John
-
QmailToaster hosted by: VR Hosted http://www.vr.org
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e
1 - 100 of 141 matches
Mail list logo