Any standard shoulder bolt the right size will do for balljoint also. As other
have said a higher tensile can be a nice touch too.
From: quantumowners@googlegroups.com on behalf
of Jim Hearne
Sent: 11 September 2023 17:15
To: quantumowners@googlegroups.com
Just standard shouldered bolts through arm to body. Camber bolts if you like in
the shock to hub mounts.
You may find washers are needed in the cavity the arm sits to get it nice and
tightly seated before tightening.
Mick
From: quantumowners@googlegroups.com
to move the axle to the rear doing that so maybe the wrong
way.
Jim
From: Mick L
Sent: Saturday, August 5, 2023 9:27 AM
To: quantumowners@googlegroups.com
Subject: Re: [Quantum Owners] Castor and camber on a saloon and top mounts
Yeah it seems to in the mount rubber work as you can hear
e bush in the track control arm ?
You’d only be able to move the axle to the rear doing that so maybe the wrong
way.
Jim
From: Mick L
Sent: Saturday, August 5, 2023 9:27 AM
To: quantumowners@googlegroups.com
Subject: Re: [Quantum Owners] Castor and camber on a saloon and top mounts
Yeah it
From: Mick L
Sent: Saturday, August 5, 2023 9:27 AM
To: quantumowners@googlegroups.com
Subject: Re: [Quantum Owners] Castor and camber on a saloon and top mounts
Yeah it seems to in the mount rubber work as you can hear the squelsh on grease
I used.
From
Nissan Micra mounts can be used and
are cheaply sourced, so a good mod.
Darren
On Fri, 4 Aug 2023, 20:48 Mick L,
mailto:lawson.m...@hotmail.com>> wrote:
Hello Everyone,
The saloon is slowly coming along but the suspension has been a irritating area
to tackle.
First and foremost are mk
5 Aug 2023, 09:31 Mick L,
mailto:lawson.m...@hotmail.com>> wrote:
Sounds like despite the refurb the mounts are toast.
The strut tops were specifically designed for each mount style weren't they so
I can't convert to mk2 tops mounts? Mine been a early mk2 makes me unsure if it
would work a
as the rubber just isn't compliant due to age so just
stretched more .
You can't get ford top mounts anymore BUT Nissan Micra mounts can be used and
are cheaply sourced, so a good mod.
Darren
On Fri, 4 Aug 2023, 20:48 Mick L,
mailto:lawson.m...@hotmail.com>> wrote:
Hello Everyone,
The
, but it's by design.
Jim
On 04/08/2023 21:17, Mick L wrote:
Hi Jim,
Yeah ours has the nylon spacers on the top of the mounts already.
From: Jim Hearne <mailto:j...@quantums.info>
Sent: 04 August 2023 19:59
To: Mick L <mailto:lawson.m...@hotmail.com>
As far as I'm aware they allow hid etc if they have washers and self levelling?
Correct my if I am wrong?
From: quantumowners@googlegroups.com on behalf
of Darren Siepka
Sent: 22 July 2023 18:38
To: quantumowners@googlegroups.com
Subject: Re: [Quantum Owners]
into the cam.
To be sure if it’s a standard cam you will have to start measure the lift etc
If in doubt either put a standard pulley on it for the moment.
Jim
From: Mick L
Sent: Wednesday, April 26, 2023 9:45 PM
To: quantumowners@googlegroups.com
Subject: [Quantum Owners] Cvh Valve timing/ cam query
Does anybody know if people have advanced the cam timing on cvh engines in
relatively standard form?
Our engine is a 1600 bored out to 1800 and has a Vernier pulley fitted which is
advanced full it seems.
I thought it must have a uprated camshaft fitted.
Upon inspection of under the rocker it
Owners] Engine mount Timing side
Tbh when the Q were designed 40 yrs ago the parts were plentiful new from ford
and they do last a very long time, even now OEM generally don't put removable
rubber into engine mounts.
On Mon, 24 Apr 2023, 08:31 Mick L,
mailto:lawson.m...@hotmail.com>>
the mounting bolts can be accessed from the engine bay side doing away the need
to try and get hands inside the nose cone area.
Yes the airtec radiator goes through the opening easily.
From: Mick L<mailto:lawson.m...@hotmail.com>
Sent: 23 April 2023 20:05
To: quantumowners@googlegrou
something you can do later ?
I have to say when i’m doing modifications on my Quantums i always try to
modify parts that won’t need replacing at some point but not always feasible,
like this engine mount.
Jim
From: Mick L
Sent: Monday, April 24, 2023 8:31 AM
To: quantumowners@googlegroups.com
was bought but the
change is not that big even if you need to pay someone to modify the mount for
you.
Best using your original as a template.
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
From: Mick L<mailto:lawson.m...@hotmail.com>
Sent: 23 Apri
The mounts on this are all shot. I've got two new gearbox ends sorted but the
main mount is modded compared to the xr2 according to Sb.
Do the rubber Interbals come out of standard mounts to fit into the modded
units?
Thanks
--
--
You received this message because you are subscribed to the
is in the nose cone with zero issues.
Mail powered by Skaro Mail Serives
From: Mick L<mailto:lawson.m...@hotmail.com>
Sent: 23 April 2023 08:11
To: quantumowners@googlegroups.com<mailto:quantumowners@googlegroups.com>
Subject: Re: [Quantum Owners] Radiator
The air tec
would cost as much or more than a new standard one.
Martin Scott
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
From: Mick L<mailto:lawson.m...@hotmail.com>
Sent: 22 April 2023 09:18
To: quantumowners@googlegroups.com<mailto:quantumowners@google
:15 Mick L,
mailto:lawson.m...@hotmail.com>> wrote:
Hello again everyone.
I got the saloon out on the road for the first time today since it broke down
on purchase with a horrendous fuel leak.
Aswell as driving poorly and feeling vague (whole suspension to overhaul on the
front I s
I have just discovered the bolt comes all the way In to the footwell. Is this
correct as standard?
From: quantumowners@googlegroups.com on behalf
of Mick L
Sent: 22 April 2023 12:30
To: quantumowners@googlegroups.com
Subject: [Quantum Owners] Re: Front
I already suspect I know the answer sadly.
Is the nut captive on the suspension arm ? Our drivers side is spinning and I
see hairy bodge so I'm guessing someone has been here before.
Wow this is all getting very kit car haha.
Cut out the bad repair to gain access to nut,captivate it and repair
section.
Easy to do and can still be removed without taking the nose off.
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
From: Mick L<mailto:lawson.m...@hotmail.com>
Sent: 21 April 2023 11:23
To: quantumowners@googlegroups.com<mailto:quantumowners@g
eight while maintaining a decent ride quality.
Darren
On Fri, 21 Apr 2023, 08:33 Mick L,
mailto:lawson.m...@hotmail.com>> wrote:
We do want a car that drives right not just looks right so it does sound like
14s may be what we have to stick with sadly then. The rides awful already but
I
them with engine out and upside down.
Jim
From: Mick L
Sent: Friday, April 21, 2023 12:51 PM
To: quantumowners@googlegroups.com
Subject: [Quantum Owners] Sump or crank seal?
What's people's opinions then? Before I go all out and take the motor out.
I will avoid it if needed of course as I'm
Our radiator is missing alot of fins.Are they standard fiesta xr2?
May aswell do it while the engines out.
Thanks Again
Mick
--
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to
r...@gmail.com<mailto:quantumhistor...@gmail.com> as I have
recently updated the quantum owners club register for the model and would like
to check to see if we have your car on the register list.
Paul
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
Fr
arger disc fitment ( example ,I have 285 mm on
the front , these only fit under 15s)
Darren
On Thu, 20 Apr 2023, 21:54 Mick L,
mailto:lawson.m...@hotmail.com>> wrote:
We have recently purchased a saloon and I planned to turn her around in a
couple of weeks to use daily after been laid
Hello again everyone.
I got the saloon out on the road for the first time today since it broke down
on purchase with a horrendous fuel leak.
Aswell as driving poorly and feeling vague (whole suspension to overhaul on the
front I suspect and a horrid exhaust to subframe rattle from old engine
We have recently purchased a saloon and I planned to turn her around in a
couple of weeks to use daily after been laid off.Myself and my partner have
always wanted one. So hello everyone.
It's turned into a whole lot of work I was not expecting sadly and I'm already
a week in and the engines
30 matches
Mail list logo