Re: [qubes-users] after update no VM 'starts' apps anymore.

-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 On 2018-01-29 19:51, 'awokd' via qubes-users wrote: > On Tue, January 30, 2018 12:05 am, 'Tom Zander' via qubes-users > wrote: >> Is this a known issue? >> >> >> I can start a VM using qvm-start, but when I use qvm-run nothing >> happens, it hangs

Re: [qubes-users] Fedora-minimal und Q. 4.0

-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 On 2018-02-06 17:05, Jo wrote: > Apologizes for being so unspecific, i actually meant missing > both.T The command qvm-convert-pdf is not recognized. I found the > pdf-converter on github, therefore, i will manually install it > within the template.

[qubes-users] HCL report for Lenovo ThinkPad T520 4240-4HG

options, visit https://groups.google.com/d/optout. Qubes-HCL-LENOVO-42404HG-20180206-203645.yml Description: application/yaml

Re: [qubes-users] Re: Qubes Manager / Qubes 4.0 R3 ?

On Sun, Feb 4, 2018 at 4:14 PM, 'Tom Zander' via qubes-users < qubes-users@googlegroups.com> wrote: > On Sunday, 4 February 2018 18:10:44 CET Yuraeitha wrote: > > Also it's been explicitly said that no Qubes 4 existing features will be > > added to the new-old Qube Manager. Which might also hint

[qubes-users] 4.0-rc4 install on Lenovo G505S - no network

I've installed rc4 on G505S with Coreboot (legacy bios). Installation went ok (found iommu and interrupt remapping just fine). On 1st (gui) boot, I've tried all the combinations selecting 1) create ServiceVMs, AppVMs, 2) only ServiceVMs, 3) only configure templates,... but none works. It

Re: [qubes-users] Re: Qubes 4.0 without IOMMU/VT-d/AMD-Vi or Interrupt Remapping

Forgot to add: It is a shame that qubes doesn't support POWER. Due to the ceasing of manufacturing of the KGPE-D16 and D8 boards the OpenPOWER9 TALOS 2 is soon the only reasonable brand new option for a performance board with libre firmware/hardware. It is of course possible to make a

Re: [qubes-users] Can't seem to build qubes 3.2

On Tuesday, February 6, 2018 at 3:48:26 PM UTC-8, Tim W wrote: > Are you running the ./setup or using the build.conf example? If the later > look at awokd's link and follow those steps. > > https://github.com/QubesOS/qubes-issues/issues/3426 > > > That is how I have been building qubes iso

Re: [qubes-users] Re: Qubes Manager / Qubes 4.0 R3 ?

On Tuesday, 6 February 2018 23:22:26 UTC, awokd wrote: > On Tue, February 6, 2018 11:09 pm, Alex Dubois wrote: > > > I do not address the main part because I believe there is a bug with > > /rw/config/qubes-firewall-user-script not triggering on network change > > that I want to report and get

Re: [qubes-users] Can't seem to build qubes 3.2

Are you running the ./setup or using the build.conf example? If the later look at awokd's link and follow those steps. https://github.com/QubesOS/qubes-issues/issues/3426 That is how I have been building qubes iso and separate templates since ver 3.1. Do not follow any of the steps to

[qubes-users] Re: Qubes 4.0 without IOMMU/VT-d/AMD-Vi or Interrupt Remapping

5he nice thing going forward is most newer processors are coming with the iommu etc where just 2 years ago it was at least 2x less choices. The real issue these days is making sure the bios/efi software is supporting it to the standard and not some half baked abortion of what it should be.

Re: [qubes-users] Can't seem to build qubes 3.2

On Tuesday, February 6, 2018 at 3:23:37 PM UTC-8, Unman wrote: > On Tue, Feb 06, 2018 at 03:06:32PM -0800, Alchemist wrote: > > On Tuesday, February 6, 2018 at 3:00:39 PM UTC-8, Alchemist wrote: > > > On Tuesday, February 6, 2018 at 2:47:29 PM UTC-8, Unman wrote: > > > > On Tue, Feb 06, 2018 at

Re: [qubes-users] Can't seem to build qubes 3.2

On Tue, Feb 06, 2018 at 03:06:32PM -0800, Alchemist wrote: > On Tuesday, February 6, 2018 at 3:00:39 PM UTC-8, Alchemist wrote: > > On Tuesday, February 6, 2018 at 2:47:29 PM UTC-8, Unman wrote: > > > On Tue, Feb 06, 2018 at 02:27:57PM -0800, Alchemist wrote: > > > > On Tuesday, February 6, 2018

Re: [qubes-users] Re: Qubes Manager / Qubes 4.0 R3 ?

On Tue, February 6, 2018 11:09 pm, Alex Dubois wrote: > I do not address the main part because I believe there is a bug with > /rw/config/qubes-firewall-user-script not triggering on network change > that I want to report and get an understanding on how it will be > addressed. This one?

Re: [qubes-users] Can't seem to build qubes 3.2

On Tue, February 6, 2018 10:47 pm, Unman wrote: > On Tue, Feb 06, 2018 at 02:27:57PM -0800, Alchemist wrote: > >> On Tuesday, February 6, 2018 at 5:15:34 PM UTC-5, Unman wrote: >> >>> On Tue, Feb 06, 2018 at 02:02:47PM -0800, Alchemist wrote: >>> So I follow the build guide instructions, I

Re: [qubes-users] Can't seem to build qubes 3.2

I have been having isses with fedoras repo over the last few days while compiling both 3.2 and 4.0. I have stopped using make qubes all together and instead compile the packages in small groups or individually. I can then redo a package a few times without starting over. I have been able to

Re: [qubes-users] Re: Qubes Manager / Qubes 4.0 R3 ?

On Tuesday, 6 February 2018 15:04:52 UTC, Alex Dubois wrote: > On Tuesday, 6 February 2018 10:32:16 UTC, awokd wrote: > > On Mon, February 5, 2018 6:18 pm, 'awokd' via qubes-users wrote: > > > On Mon, February 5, 2018 6:01 pm, 'Tom Zander' via qubes-users wrote: > > > > >> If someone can figure

Re: [qubes-users] Can't seem to build qubes 3.2

On Tuesday, February 6, 2018 at 3:00:39 PM UTC-8, Alchemist wrote: > On Tuesday, February 6, 2018 at 2:47:29 PM UTC-8, Unman wrote: > > On Tue, Feb 06, 2018 at 02:27:57PM -0800, Alchemist wrote: > > > On Tuesday, February 6, 2018 at 5:15:34 PM UTC-5, Unman wrote: > > > > On Tue, Feb 06, 2018 at

Re: [qubes-users] Can't seem to build qubes 3.2

On Tuesday, February 6, 2018 at 2:47:29 PM UTC-8, Unman wrote: > On Tue, Feb 06, 2018 at 02:27:57PM -0800, Alchemist wrote: > > On Tuesday, February 6, 2018 at 5:15:34 PM UTC-5, Unman wrote: > > > On Tue, Feb 06, 2018 at 02:02:47PM -0800, Alchemist wrote: > > > > So I follow the build guide

Re: [qubes-users] Re: [qubes-devel] Qubes OS 4.0-rc4 has been released!

strange. starting VMs is much slower for me and a minion than 4rc3 or 3.2 were. even vm performance seems slower. for example typing in and scrolling in windows in firefox is slower, though videos on youtube still play fine, even in full screen. we expected a performance hit for mitigating the

Re: [qubes-users] Can't seem to build qubes 3.2

On Tuesday, February 6, 2018 at 5:15:34 PM UTC-5, Unman wrote: > On Tue, Feb 06, 2018 at 02:02:47PM -0800, Alchemist wrote: > > So I follow the build guide instructions, I have No_Sign=1, but for some > > reason the build script fails by telling me that the package is unsigned. > > > > Fedora 27

[qubes-users] Can't seem to build qubes 3.2

So I follow the build guide instructions, I have No_Sign=1, but for some reason the build script fails by telling me that the package is unsigned. Fedora 27 is my build system. Any ideas? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To

[qubes-users] Re: [qubes-devel] Qubes OS 4.0-rc4 has been released!

On 02/01/2018 03:44 AM, Andrew David Wong wrote: We're pleased to announce the fourth release candidate for Qubes 4.0! A big thanks for that! So far it seems more stable than the previous RCs and PVH doesn't only provide the mentioned security gain, but also provides much better performance

[qubes-users] Re: Qubes 4.0 without IOMMU/VT-d/AMD-Vi or Interrupt Remapping

On Monday, February 5, 2018 at 10:34:34 AM UTC-5, Utility Panel wrote: > I installed Qubes 4.0-rc4 on a machine with hardware that cannot support the > following two features > > IOMMU/VT-d/AMD-Vi > Interrupt Remapping > > The installation went fine. I simply continued installing after the

[qubes-users] firefox addons in offline template VMs

Dear all, does anyone have a good solution for offline firefox addon installation & regular updates to template VMs? If so, I'd be delighted if you shared your idea or code. Otherwise I'd probably write a few lines to download the addons in a separate VM, pass it to the offline template via

Re: [qubes-users] Fedora-minimal und Q. 4.0

Apologizes for being so unspecific, i actually meant missing both.T The command qvm-convert-pdf is not recognized. I found the pdf-converter on github, therefore, i will manually install it within the template. Another thing/bug i noticed actually right now: My sys-vpn (fedora-26-minimal) are

Re: [qubes-users] Re: Qubes 4.0 - Inbound port forwarding

On Tue, February 6, 2018 11:35 am, 'awokd' via qubes-users wrote: > [Re-titling this sub-thread] > Anyone out there intimate with nft/iptables? My PR went through so the > document is up for grabs again if you want it! (Or please give suggestions > here and I can document it too.) For anyone

[qubes-users] Yubikey with smartcard and HOTP together

Hi, all: This is a different and a more nuanced problem than recently discussed, and I'm not sure if there's a solution, but I wanted to ask. :) Yubikey-4 can act in multiple capacities: - Smartcard - U2F device - HOTP HOTP functionality is really just a keyboard and registers with Linux as

[qubes-users] template debian-9 no network (Q4r4) ?

you probably ticked update over Tor option when installing. templates do not connect to network directly, they use an updates proxy. I' not sure it can be changed in GUI, but you can find the appropriate rpc policy in /etc/qubes-rpc alternatively you can temporarily set template vm's network

Re: [qubes-users] Trouble with enabling networking between two Vms

On Tuesday, 6 February 2018 21:21:31 UTC+8, dba...@gmail.com wrote: > Le jeudi 10 novembre 2016 18:09:30 UTC+1, Max a écrit : > > On Thursday, 10 November 2016 07:34:06 UTC+8, Drew White wrote: > > > On Thursday, 10 November 2016 04:36:18 UTC+11, Max wrote: > > > > Brief update on this. After

[qubes-users] Re: Trouble with enabling networking between two Vms

On Tuesday, 6 February 2018 22:49:31 UTC+8, Alex Dubois wrote: > On Sunday, 23 October 2016 10:11:48 UTC+1, Max wrote: > > Hi, > > > > I am a new user of Qubes OS so apologies in advance if the question here > > has been answered already in a separate topic (there are similar issues) > > and

Re: [qubes-users] Re: Qubes Manager / Qubes 4.0 R3 ?

On Tuesday, 6 February 2018 10:32:16 UTC, awokd wrote: > On Mon, February 5, 2018 6:18 pm, 'awokd' via qubes-users wrote: > > On Mon, February 5, 2018 6:01 pm, 'Tom Zander' via qubes-users wrote: > > >> If someone can figure out how to port-forward in 4.0, please do update > >> the docs. I never

Re: [qubes-users] Re: Qubes Manager / Qubes 4.0 R3 ?

On Monday, 5 February 2018 00:26:36 UTC, Tom Zander wrote: > On Monday, 5 February 2018 00:55:34 CET Unman wrote: > > On Sun, Feb 04, 2018 at 08:14:57PM +0100, 'Tom Zander' via qubes-users > wrote: > > > * Having nothing but python APIs for your operating system is something > > > that makes no

[qubes-users] Re: Trouble with enabling networking between two Vms

On Sunday, 23 October 2016 10:11:48 UTC+1, Max wrote: > Hi, > > I am a new user of Qubes OS so apologies in advance if the question here has > been answered already in a separate topic (there are similar issues) and I > haven’t discovered this or it is not one suited to this mailing list. I am

[qubes-users] template debian-9 no network (Q4r4) ?

Hi, qvm- I have installed the debian-9 template on dom0 using: sudo qubes-dom0-update qubes-template-debian-9. When running this template to make it up to date, the network is not working. Even if using the same proxyVM and netVM than the other VMs, it still start sys-whonix ... Any idea ? --

Re: [qubes-users] 4.0-rc4 Install Help

On Sat, 3 Feb 2018 09:22:08 -0800 (PST) Shashank wrote: > I guess I’ll not jump into booting into legacy mode and having to > mess up all the boot options again. If you do find a way to install > it in uefi mode like 3.2 please do post the solution. > HI again. Well

Re: [qubes-users] Trouble with enabling networking between two Vms

Le jeudi 10 novembre 2016 18:09:30 UTC+1, Max a écrit : > On Thursday, 10 November 2016 07:34:06 UTC+8, Drew White wrote: > > On Thursday, 10 November 2016 04:36:18 UTC+11, Max wrote: > > > Brief update on this. After attempting to use the Qubes Network Server > > > from Manuel Amador (Rudd-O)

[qubes-users] Re: Qubes 4.0 - Inbound port forwarding

[Re-titling this sub-thread] On Tue, February 6, 2018 11:12 am, 'Tom Zander' via qubes-users wrote: > On Tuesday, 6 February 2018 11:32:07 CET 'awokd' via qubes-users wrote: > >> I'm not getting past the first step of: >> >> >> Verify you are cutting through the sys-net VM firewall by looking at

Re: [qubes-users] Please help with Qubes 4.0 rc4 on 8th Generation Intel

On Mon, February 5, 2018 2:13 pm, Krišjānis Gross wrote: > Hi, > > > I have recently installed Qubes 4.0 rc4 on a new 8th generation Intel > hardware and have an issue that I would like to get help with. > > The issue is that graphics appear to be very very slow. Each time there > is some visual

Re: [qubes-users] Re: Qubes Manager / Qubes 4.0 R3 ?

On Tuesday, 6 February 2018 11:32:07 CET 'awokd' via qubes-users wrote: > I'm not getting past the first step of: > > Verify you are cutting through the sys-net VM firewall by looking at its > counters (column 2) Yes, that sounds familiar. The problem isn't limited to sys-net either, using

[qubes-users] size difference between 4.9 and 4.14 kernels

hi, on 3.2 I ran "sudo qubes-dom0-update" this morning, followed by "sudo qubes-dom0-update --enablerepo=qubes-dom0-current-testing --action=upgrade kernel-qubes-vm" which then prompted me with this: Installing: kernel x86_64 1000:4.14.13-3.pvops.qubes

[qubes-users] Re: GPU Passthrough Status - (Purely a meta-discussion, no specifics)

On Saturday, December 16, 2017 at 3:25:46 AM UTC+1, Yuraeitha wrote: > Aight, so the idea of this thread, is to get an overview of where we stand, > that is, how far are we away from archiving GPU Passthrough on Qubes. > > The underlying reason it's currently not working, appears to be because

Re: [qubes-users] Re: Qubes Manager / Qubes 4.0 R3 ?

On Mon, February 5, 2018 6:18 pm, 'awokd' via qubes-users wrote: > On Mon, February 5, 2018 6:01 pm, 'Tom Zander' via qubes-users wrote: >> If someone can figure out how to port-forward in 4.0, please do update >> the docs. I never managed to get that working. I see what you mean. If I follow

Re: [qubes-users] Qubes 3.2 after patching

On Tue, January 30, 2018 4:54 pm, rob_66 wrote: > Hello. > > > So, I received Xen packages, version 4.6.6-36, via dom0 > --enablerepo=qubes-dom0-security-testing. > > > I changed 1) the (xscreensaver) password and 2) LUKS passphrase. > > > Now the questions: > > > Can I start with 3) disk