Andrew David Wong:
On 10/7/20 3:56 AM, Andrew David Wong wrote:
On 10/7/20 3:47 AM, Andrew David Wong wrote:
On 10/7/20 3:46 AM, Andrew David Wong wrote:
Hi all,
Many of us have recently upgraded to Thunderbird 78, which changes
the way OpenPGP keys are handled. Thanks to Frédéric, the
I have an issue with the qTox and Zulucrypt, when opening these apps in
the AppVMs based on both debian-10 and whonix-ws-15 templates. I use a
built in 1920x1080 laptop monitor, not an external one.
It looks like if it was under a magnifier.
Is there any available solution to this issue?
--
' via qubes-users
Reply-To: taran1s
To: qubes-users
I have an issue with the qTox and Zulucrypt, when opening these apps in
the AppVMs based on both debian-10 and whonix-ws-15 templates. I use a
built in 1920x1080 laptop monitor, not an external one.
It looks like if it was under a magnifier
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
When I backup my qubes, after I click on the backup icon in the Qube
Manager, I can see in the bottom following warning that was not there
before:
Warning: unrecognized data found in configuration files.
I didn't make any changes to dom0. I am
It happened to me as well and is most probably an issue with the
pulseaudio.
Does it happen with fedora-32 template only or is it the case for other
templates too?
If only with fedora-32, try to directly open the fedora-32 template and
execute:
$ sudo dnf update
If it says anything about
Franz:
On Fri, Dec 6, 2019 at 7:31 AM scurge1tl wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
I would like to ask if there is any reliable way to get Android
template into Qubes, so that I could create AppVMs for different
android apps (from google play too). I know about the
taran1s:
Chris Laprise:
On 5/2/20 6:54 AM, unman wrote:
On Sat, May 02, 2020 at 08:22:57AM +, taran1s wrote:
unman:
On Fri, May 01, 2020 at 11:54:27AM +, taran1s wrote:
taran1s:
Chris, I tried now to connect to the kraken.com, which seems to be tor
unfriendly through
I have installed and enabled the qubes-split-browser. I would like to
check if the behavior of the qubes-split-browser is as intended.
My surfer VM is based on Fedora-32, with networking disabled. Its
disp-VM is set to whonix-ws-15-disp, that itself is based on whonix-ws-15.
In the surfer VM
I am using Qubes as my main OS and now it seems that due to my work
assignment, I will need to use MS Office 365 and I would like to keep
using my Qubes laptop.
I will need to use the MS Office 365 ideally with/without the following
features:
- no need to have internet connection
- no need
Sven Semmler:
need to use MS Office 365
Condolences.
Thank you, taken sadly.
workaround other than necessity to install whole Windows OS
https://www.codeweavers.com/compatibility/crossover/microsoft-office-365
WIN7 or WIN10 [...] point me to a how to guide?
unman:
On Tue, Jul 06, 2021 at 10:00:23AM +, 'taran1s' via qubes-users wrote:
I have my debian based templates updating repos onionized through existing
v2 onions. Tor Project announced that it will deprecate the v2 onions. Are
there any alternative debian v3 onions for debian updates
'taran1s' via qubes-users:
Hi, I am trying to make work the sys-net and sys-firewall under
debian-10-minimal template, instead of fedora-33, but without success.
Fedora is annoying with its updates and also I would like to decrease
the exposure to the complexity of fedora-33 full template
Hi, I am trying to make work the sys-net and sys-firewall under
debian-10-minimal template, instead of fedora-33, but without success.
Fedora is annoying with its updates and also I would like to decrease
the exposure to the complexity of fedora-33 full template wherever
possible.
I followed
I have my debian based templates updating repos onionized through
existing v2 onions. Tor Project announced that it will deprecate the v2
onions. Are there any alternative debian v3 onions for debian updates?
--
You received this message because you are subscribed to the Google Groups
Rusty Bird:
taran1s:
Rusty Bird:
Anything interesting in 'sudo journalctl' on
the DisposableVM?
Can you navigate me how to open the terminal in the active dispvm please?
In the Domains Widget (system tray Q button), there's 'Run Terminal'
inside the disp1234 submenu.
Sorry, in the
I have got my X230 with Qubes preinstalled. Everything seems to work
well, but I cant switch-on the backlit keyboard. Pressing Fn+Space just
cycles between ON and OFF of the upper light (besides camera). The X230
of course has, or should have, the backlit keyboard.
I didn't find any options
unman:
On Tue, Apr 06, 2021 at 12:44:31PM +, 'taran1s' via qubes-users wrote:
I have got my X230 with Qubes preinstalled. Everything seems to work well,
but I cant switch-on the backlit keyboard. Pressing Fn+Space just cycles
between ON and OFF of the upper light (besides camera
How do I use the X230+Qubes 4.0 with external monitor of at least 1080p
or higher? I understand that a dock station (Ultrabase?) is required to
be able to use the HiDPI external monitor with X230.
What smallest dock station would you propose for this purpose? Is there
possibly some other,
unman:
On Wed, Apr 07, 2021 at 01:59:10PM +, 'taran1s' via qubes-users wrote:
How do I use the X230+Qubes 4.0 with external monitor of at least 1080p or
higher? I understand that a dock station (Ultrabase?) is required to be able
to use the HiDPI external monitor with X230.
What
unman:
On Thu, Apr 08, 2021 at 01:25:57PM +, 'taran1s' via qubes-users wrote:
unman:
On Wed, Apr 07, 2021 at 01:59:10PM +, 'taran1s' via qubes-users wrote:
How do I use the X230+Qubes 4.0 with external monitor of at least 1080p or
higher? I understand that a dock station
Rusty Bird:
taran1s:
- TB opens up in disp-VM whonix-ws-15-disp.
In a VM named like disp1234 though, right?
Right.
The welcome page is not Whonix Welcome Page as normally when I open
the TB in the disp VM directly, but instead it opens up the About
Tor welcome page. Is this intended?
Hello,
In my last message I mentioned my attempts to start using the Trezor
with qubes.
I try to follow this guide, from the official trezor website:
https://wiki.trezor.io/Qubes_OS
I use the sys-usb based on debian-10 and tried the same with sys-usb
based on debian-10-minimal with
Hello all, I would like to start to use Trezor with my qubes. I would
like to follow this guide here https://wiki.trezor.io/Qubes_OS. My
intention is to use the Trezor HW wallet in a anon-whonix AppVm with
Trezor Suite qube through Tor. I run qubes on X230 Nitropad.
I would like to check if
tetrahedra via qubes-users:
On Thu, Aug 26, 2021 at 02:27:35PM +, 'taran1s' via qubes-users wrote:
Hello all, I would like to start to use Trezor with my qubes. I would
like to follow this guide here https://wiki.trezor.io/Qubes_OS. My
intention is to use the Trezor HW wallet in a anon
tetrahe...@danwin1210.me:
On Thu, Aug 26, 2021 at 02:27:35PM +, 'taran1s' via qubes-users wrote:
Hello all, I would like to start to use Trezor with my qubes. I would
like to follow this guide here https://wiki.trezor.io/Qubes_OS. My
intention is to use the Trezor HW wallet in a anon
On Tue, Aug 31, 2021 at 02:53:47PM +, 'taran1s' via qubes-users wrote:
Hello,
In my last message I mentioned my attempts to start using the Trezor
with qubes.
I try to follow this guide, from the official trezor website:
https://wiki.trezor.io/Qubes_OS
I use the sys-usb based
I am thinking about upgrading my Nitropad X230 Qubes to 4.1, but I am
curious if the version 4.1 has some serious issues that would make the
experience worse than the current 4.0 or would need many tweaks to make
the beast run well.
I know that the 4.1 is an rc1 with all its pros and cons,
Insurgo Technologies Libres / Open Technologies:
On October 13, 2021 3:16:13 PM UTC, 'taran1s' via qubes-users
wrote:
unman:
On Wed, Oct 13, 2021 at 10:24:46AM +, 'taran1s' via qubes-users wrote:
I am thinking about upgrading my Nitropad X230 Qubes to 4.1, but I am
curious
unman:
On Wed, Oct 13, 2021 at 10:24:46AM +, 'taran1s' via qubes-users wrote:
I am thinking about upgrading my Nitropad X230 Qubes to 4.1, but I am
curious if the version 4.1 has some serious issues that would make the
experience worse than the current 4.0 or would need many tweaks
Insurgo Technologies Libres / Open Technologies:
On October 13, 2021 3:16:13 PM UTC, 'taran1s' via qubes-users
wrote:
unman:
On Wed, Oct 13, 2021 at 10:24:46AM +, 'taran1s' via qubes-users wrote:
I am thinking about upgrading my Nitropad X230 Qubes to 4.1, but I am
curious
I am searching for someone who is actually really using Trezor-T on Qubes.
I tried following:
- new vanilla sys-usb AppVM based on new vanilla debian-10 template
- new vanilla trezord AppVM based on new vanilla whonix-ws-16 template
Used packages (Trezor Suite gpg2 --verified against
Andrew David Wong:
Dear Qubes Community,
We're pleased to announce the second release candidate for Qubes 4.1!
Qubes 4.1-rc2 contains fixes for bugs that were discovered in the first
release candidate (4.1-rc1). For existing Qubes 4.1-rc1 users, a regular
update [01] is sufficient to
TheGardner:
Mentioned already here and there. Thats one of the cons using a dispVM for
the sys-qubes.
Next one is - you can't "restart"...
r...@abtion.com schrieb am Donnerstag, 2. Dezember 2021 um 04:00:32 UTC-5:
I have installed 4.1rc2 and chose a disposable sys-net, because I could
unman:
On Wed, Mar 09, 2022 at 11:20:53AM +, 'taran1s' via qubes-users wrote:
taran1s:
I have an issue with Split GPG as well as with opening files in the
disposable VMs and with the qrexec in the guide How to use Monero
CLI/daemon with Qubes + Whonix too.
https://www.getmonero.org
taran1s:
I have an issue with Split GPG as well as with opening files in the
disposable VMs and with the qrexec in the guide How to use Monero
CLI/daemon with Qubes + Whonix too.
https://www.getmonero.org/resources/user-guides/cli_wallet_daemon_isolation_qubes_whonix.html
Split GPG
I have an issue with Split GPG as well as with opening files in the
disposable VMs and with the qrexec in the guide How to use Monero
CLI/daemon with Qubes + Whonix too.
https://www.getmonero.org/resources/user-guides/cli_wallet_daemon_isolation_qubes_whonix.html
Split GPG
Opening
Demi Marie Obenour:
On Wed, Mar 16, 2022 at 10:02:41AM +, 'taran1s' via qubes-users wrote:
unman:
On Wed, Mar 09, 2022 at 11:20:53AM +, 'taran1s' via qubes-users wrote:
taran1s:
I have an issue with Split GPG as well as with opening files in the
disposable VMs
Hello everyone, I am using the Nitropad X230 with the latest 4.0 Qubes
installed.
In the conversation with Thierry Laurion here
https://groups.google.com/g/qubes-users/c/KsY46D55UQM/m/F3cQ-89KBQAJ it
seemed that at that time the Nitropad X230 was not ready to transit to
Qubes 4.1.
This
I tried this but didn't succeed.
sudo qubes-dom0-update qt5-qtstyleplugins
sudo qubes-dom0-update
export QT_QPA_PLATFORMTHEME=gtk2
cat /etc/environment QT_QPA_PLATFORMTHEME=gtk2
cat: 'QT_QPA_PLATFORMTHEME=gtk2': No such file or directory
Qube Manager is still white ^^. Any ideas?
TheGardner:
Hello everyone, I am trying to set up the dark theme in dom0. All
working well but at the end it doesnt work. There are some errors
popping up and I think this is the issue but duno how to solve that.
[xxx@dom0 ~]$ sudo qubes-dom0-update qt5-qtstyleplugins
Using sys-whonix-update as UpdateVM
Hello everyone, I would like to ask how to use audio conference in a
Torbrowser in Whonix anon-whonix in Qubes. I need to make some live
presentation with a team, through audio and screen sharing.
I tried to use microphone, connected it with the anon-whonix AppVM, but
Torbrowser doesn't
Hi,
What is the best practice for setting up a VPN proxy in Qubes these days
(for Mullvad, VPN over Tor)?
I found two versions for setup of VPN proxy in Qubes:
The first one is from tasket called Qubes-vpn-support. The last version
is dated Dec 2020:
Andrew David Wong:
On 5/12/23 4:31 AM, 'taran1s' via qubes-users wrote:
If anon-whonix AppVM is set to use mullvad-VPN that is connected to sys-whonix
it doesn't connect to internet. If one uses Debian or Fedora based AppVM and
runs vanilla Firefox, it works like a breeze.
Any ideas how
Demi Marie Obenour:
On Sat, May 13, 2023 at 10:57:00AM +, Qubes OS Users Mailing List wrote:
Andrew David Wong:
On 5/12/23 4:31 AM, 'taran1s' via qubes-users wrote:
If anon-whonix AppVM is set to use mullvad-VPN that is connected to sys-whonix
it doesn't connect to internet. If one
or Fedora
based AppVM and runs vanilla Firefox, it works like a breeze.
Any ideas how to solve this?
Leo28C:
I followed this guide: https://micahflee.com/2019/11/using-mullvad-in-qubes/
(works with others too not just Mullvad)
On Wed, May 10, 2023 at 9:51 AM 'taran1s' via qubes-users <
qubes-us
45 matches
Mail list logo
