[RBW] For sale- 2, 59cm Clems

[Tim O. (Portland, OR)]

Jim-

Sorry to hear you're having health issues. Where are you located? Do you have 
any pictures?

Thanks,
Tim

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Saluki Links

[John Hawrylak]

Rob

Thanks for the 2 RR articles.  I vaguely remember these, but not paying 
full attention at the time.  GP was certainty besting the 650B drum at the 
time and it seems history proved him much more right than wrong

John Hawrylak
Woodstown NJ

On Tuesday, August 8, 2017 at 11:44:13 AM UTC-4, rob markwardt wrote:

> Here's the country bike article.  
>
> On Tuesday, August 8, 2017 at 8:41:23 AM UTC-7, rob markwardt wrote:
>>
>> I was digging through my old Readers last night (weren't those a blast!) 
>> and this is the oldest Saluki article I could find (issue 33).  It mentions 
>> a "Big Saluki report in the next issue" but looking through #34 I don't see 
>> much specifically about Saluki's...lots of talk about 650b though.  #35 has 
>> an article on country bikes and uses a side shot of a Saluki.
>>
>>
>>
>>
>> On Wednesday, August 2, 2017 at 3:28:16 PM UTC-7, John Hawrylak wrote:
>>>
>>> Does any one have any links to the RBW literature on the early 
>>> Saluki's???  looking at the 54cm on Seattle CL, since it is my size.
>>>
>>> I know the Saluki's transformed into the 650B AHHs, but there seems to 
>>> be subtle differences.
>>>
>>> I thought there were links on Cyclofiend's site, but have not located 
>>> them
>>>
>>>
>>> John Hawrylak
>>> Woodstown NJ
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Cable/Housing Cutter Suggestions

[Steven Sweedler]

Tim I have been using Klein side cutters for years but buying a pair of
Park or Felco's will be very. Satisfying

On Tue, Aug 8, 2017 at 6:10 PM Tim O. (Portland, OR) <
timothycharles...@gmail.com> wrote:

> I've been using a cheapo tool to cut cables and housing forever, but it's
> always a clunky process that results in frayed cables and/or frustration. I
> hate cutting housing so much that I just left my housing way too long when
> I recently changed my shifters.
>
> Just did a quick search to see what's out there and it looks like $20-40
> bucks for something specific to bikes for cutting cable/housing. Does
> anyone have experiences they'd like to share? Do I want a bike specific
> cable cutter or can I get a generic hardware store version? Is it worth it
> to spend the extra few $$ on this tool or do they all work the same?
>
> If Riv sold one, I'd just buy that version.
>
> Thanks!
> Tim
> Portland, OR
>
> --
> You received this message because you are subscribed to the Google Groups
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
> For more options, visit https://groups.google.com/d/optout.
>
-- 
Steven Sweedler
Plymouth, New Hampshire

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Cable/Housing Cutter Suggestions

[Bill Lindsay]

Park CN-10 and Felco C-3 are classic choices, and should last any home 
mechanic multiple lifetimes. 

Bill Lindsay
El Cerrito, CA

On Tuesday, August 8, 2017 at 3:10:01 PM UTC-7, Tim O. (Portland, OR) wrote:
>
> I've been using a cheapo tool to cut cables and housing forever, but it's 
> always a clunky process that results in frayed cables and/or frustration. I 
> hate cutting housing so much that I just left my housing way too long when 
> I recently changed my shifters.
>
> Just did a quick search to see what's out there and it looks like $20-40 
> bucks for something specific to bikes for cutting cable/housing. Does 
> anyone have experiences they'd like to share? Do I want a bike specific 
> cable cutter or can I get a generic hardware store version? Is it worth it 
> to spend the extra few $$ on this tool or do they all work the same? 
>
> If Riv sold one, I'd just buy that version.
>
> Thanks!
> Tim
> Portland, OR
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Cable/Housing Cutter Suggestions

[Conway Bennett]

Get the expensive Shimano one.  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Cable/Housing Cutter Suggestions

[Joe Bernard]

I've had the Park for ages, and my recent Pedro's kit purchase has a cutter. 
Bike shops use separate tools for housing and inner wire, but I use one cutter 
for both. The trick when cutting housing is to put a piece of scrap wire in the 
end to keep the hole round and cut. Then grab a flat file to smooth it out a 
bit. An added benefit on the Park tool is it has a squisher for 
shifter/brake-wire end caps. 

Spend the money, get the tool. You'll be shocked at how much of a difference it 
makes. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Cable/Housing Cutter Suggestions

[Eric Norris]

I use Park’s cable cutter for cables, but I prefer using a Dremel and a small 
cutting wheel for the housing. The Park cutter kind of munches up the housings; 
a cutting wheel makes a nice, straight, flat cut.

--Eric Norris
campyonly...@me.com
@CampyOnlyguy (Twitter/Instagram)

> On Aug 8, 2017, at 3:10 PM, Tim O. (Portland, OR) 
>  wrote:
> 
> I've been using a cheapo tool to cut cables and housing forever, but it's 
> always a clunky process that results in frayed cables and/or frustration. I 
> hate cutting housing so much that I just left my housing way too long when I 
> recently changed my shifters.
> 
> Just did a quick search to see what's out there and it looks like $20-40 
> bucks for something specific to bikes for cutting cable/housing. Does anyone 
> have experiences they'd like to share? Do I want a bike specific cable cutter 
> or can I get a generic hardware store version? Is it worth it to spend the 
> extra few $$ on this tool or do they all work the same? 
> 
> If Riv sold one, I'd just buy that version.
> 
> Thanks!
> Tim
> Portland, OR
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: For sale- 2, 59cm Clems

[Belopsky]

https://buffalo.craigslist.org/bik/d/rivendell-clem-smith-jr/6251696071.html

https://buffalo.craigslist.org/bik/d/rivendell-clem-smith-jr/6220913096.html

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Cable/Housing Cutter Suggestions

[Tim O. (Portland, OR)]

I've been using a cheapo tool to cut cables and housing forever, but it's 
always a clunky process that results in frayed cables and/or frustration. I 
hate cutting housing so much that I just left my housing way too long when I 
recently changed my shifters.

Just did a quick search to see what's out there and it looks like $20-40 bucks 
for something specific to bikes for cutting cable/housing. Does anyone have 
experiences they'd like to share? Do I want a bike specific cable cutter or can 
I get a generic hardware store version? Is it worth it to spend the extra few 
$$ on this tool or do they all work the same? 

If Riv sold one, I'd just buy that version.

Thanks!
Tim
Portland, OR

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] For sale- 2, 59cm Clems

[jim lynchIII]

Hello to All!  Severe spinal arthritis forces the sale of my two Clems. Both 
are H models,59cm.  Both have Schwalbe Big Apple tires, ergonomic grips, Planet 
Bike Fenders,and MKS King Grip pedals   The green one has a Planet Bike rear 
rack.
The Butternut is in pristine showroom condition, and I'm asking $800 for him.
The Green is in very good condition, but has touched up stone chips on the 
steering head tube. Purely cosmetic, but they are there. Asking $425 for him.
I can ship at the buyers expense.  Happy to answer any questions and send 
pictures.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Atlantis Fender recommendations

[René Sterental]

Berthoud makes 60mm steel fenders, which are excellent as well. I had them
on my Hunqapillar before I sold it.

René

On Tue, Aug 8, 2017 at 12:56 PM Bill  wrote:

> I'm using 52mm Velo Orange Zeppelins on Snoqualmie Pass tires with no
> issues. They're not overly roomy but I'm OK with what I've got. They'd be
> good with anything smaller, i.e., 42, 40, or 38. I've wrangled with Honjo
> installations before and these were much easier, even though they employ
> the same type of attachment.
>
> --
> You received this message because you are subscribed to the Google Groups
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: 59 vs. 52 Clem L

[Garth]

Correction .,,, that's "any ways" ! Sheeesh ☺it sure would be nice if 
we could simply edit these things, I mean hey, are we using typewriters or is 
what ?  Ahahahahaha !  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: 59 vs. 52 Clem L

[Garth]

The Clem H is not being discontinued or anything like that since it seems to be 
popular for them !  Only Riv knows why they do not state on the sale page that 
new models and colors are coming in October, which is clearly stated in the 
Blug. It seems different people may be updating each each or it was overlooked 
or maybe something else altogether. 
And ways .Fear not and beathe freely ! 

Dated July 18, 2017:

  "Clem H

   Those are coming in October too. New colors. We’ll announce that soon"

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: Cable/Housing Cutter Suggestions

[Lee Legrand]

Hi Joe,

I recommend getting separate cutters for both housing and cables. Get a
rotary tool for cutting the housing and a good cable cutter for cables.
Using a typical cable cutter closes the metal casing of the housing and
does not leave a square edge.  In addition, you will need a awl to reopen
the housing hole to allow cables to run thru and metal file to get a square
edge. Get a good quality cable cutter that last to cut the cables and you
should be good.

On Tue, Aug 8, 2017 at 9:55 PM, Joe Bernard  wrote:

> I've heard this phrase, "side cutter", for years. What does it look like?
>
> --
> You received this message because you are subscribed to the Google Groups
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Cable/Housing Cutter Suggestions

[blakcloud]

For cables I use Hozan or Park, they both work well. For housing I use a 
Dremel with a cut off wheel. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: 59 vs. 52 Clem L

[Joe Bernard]

I got my Cheviot-green 52 CLEM L (complete) today; a couple of interesting 
notes: It uses a 9-speed drivetrain instead of 8 from the first run, and the 
SunRace upside-down-backwards friction shifters are the higher-level series 
with a click or friction option on the left-supposed-to-be-right shifter. If 
you want to go full click on the rear you can rearrange the shifters to outside 
the bar. Also, the spoke nipples are several colors for a neat Speedblend 
effect (does anyone remember Speedblend tires?)

I'll get pics tomorrow when I've installed saddle, fenders and rack and get 
outside. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Cable/Housing Cutter Suggestions

[Bill in Roswell GA]

FWIW, master mechanics I know use the best cutters available (Park Pro and 
Felco in equal numbers)  and still use a dental pick to round out the 
housing ends. 

I have a Dremel and love using it for many jobs. But too much time is 
wasted pulling it out, attaching the cutting wheel, plugging it in and then 
putting it all way when I can cut housing in less than 30 seconds with good 
Park cutters (the CN-10) and a dental pick. The CN-10 can be found for 
under $30 if you do a bit of search or use a coupon. You'll never regret 
spending the money for quality tools! 

Cheers,
Bill in Roswell, GA who owns a lot of cheap tools, but the tools I use the 
most are quality tools because it's not worth the repeated frustration of 
using cheap tools!

On Tuesday, August 8, 2017 at 6:10:01 PM UTC-4, Tim O. (Portland, OR) wrote:
>
> I've been using a cheapo tool to cut cables and housing forever, but it's 
> always a clunky process that results in frayed cables and/or frustration. I 
> hate cutting housing so much that I just left my housing way too long when 
> I recently changed my shifters.
>
> Just did a quick search to see what's out there and it looks like $20-40 
> bucks for something specific to bikes for cutting cable/housing. Does 
> anyone have experiences they'd like to share? Do I want a bike specific 
> cable cutter or can I get a generic hardware store version? Is it worth it 
> to spend the extra few $$ on this tool or do they all work the same? 
>
> If Riv sold one, I'd just buy that version.
>
> Thanks!
> Tim
> Portland, OR
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Atlantis Fender recommendations

[Jon BALER]

Check out planet bike alx, which are their aluminum version.  Easier to install 
than velo orange. 

65 mm version 

http://ecom1.planetbike.com/ALX29Medium.html

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] FS Rivendell Atlantis 64cm

[Eric Floden]

I get a 404 error on the link...

eric
Ontario

On Aug 8, 2017 10:30 PM, "tdusky"  wrote:

> Hello
>
> Rivendell Atlantis 64cm
>
> 2006 Toyo build
>
> Shimano Ultegra headset
>
> Front Wheel
>
> 36 spokes DB stainless
>
> Velocity Synergy Rim
>
> Shimano Deore XT rim Riv Build
>
>
> Rear wheel
>
> 40 spokes DB stainless
>
> Sun Rhino Lite Rim
>
> Formula Hub Pro Build
>
>
> 46mm Nitto Noodle Handlebar
>
> Nitto Tecnomic Stem
>
> Brooke leather handlebar wrap shellacked
>
> Weinmann brake levers with gum hoods
>
> Campy Nuvo Record Bar end shifters
>
>
> IDR Cantilever breaks
>
>
> Sugino XD2 Crank, Triple 46x36x24 170mm
>
> Shimano Cartridge Bottom Bracket
>
>
> Suntour Derailleurs
>
>
> Avocet Touring II Saddle
>
>
> Schwalbe Marathon 47mm almost new tires
>
>
> 60mm Berthoud stainless steel fenders with leather mudflaps
>
>
> Recent tune up that included New chain, rear derailleur cable, and rear
> brake blocks
>
> Touch up paint included
>
>
> $1600 pick up (in Detroit Michigan area or $100 shipped
>
>
> Photos to view https://photos.google.com/album/
> AF1QipO8WSspPwByf2QZdor8ngdw0k7IrAj1EhsZdffc
>
>
> Thanks
>
> Tom Dusky
>
> --
> You received this message because you are subscribed to the Google Groups
> "RBW Owners Bunch" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Advice for selling a Saluki/Hilsen?

[G.E.]

I'm in need of some assistance and am hoping some of you here might have 
thoughts and be able to offer suggestions. I purchased a NOS Saluki/Hilsen 
from Riv at the beginning of the year and built it up. It's been ridden, 
but not much (it's a second Riv for me). My husband and I agreed that we 
would each sell a bicycle in order to make space and help fund the purchase 
of a tandem we can ride together. Unfortunately for me, this is the only 
bike I can really see letting go of in the current bunch since it functions 
mostly as a duplicate as far as purpose in the bike fold goes.

Anyway... long story short, I need some help in regard to a selling price. 
Obviously, I can calculate out the cost of what I paid for the frame/fork 
and all the parts, but I'm looking for realistic numbers for a (mostly) 
whole bike. I don't intend to sell the saddle, pedals, or any carrying 
stuff like bags, baskets, racks, but otherwise it has fenders and all the 
parts necessary for riding. I don't want to be unrealistic about a price, 
but if you have thoughts on what these are typically going for these days, 
I would appreciate your feedback. Additionally, if you have thoughts on a 
good place(s) to try to list it, that would be helpful too. I'm trying to 
avoid eBay if I can help it. 

Thanks so much in advance for your thoughts.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Cable/Housing Cutter Suggestions

[Joe Bernard]

I'll repeat my tip 'cause I think it got missed: Cutting the housing (Park 
cutter) with a scrap piece of cable inside helps keep the end round. A dental 
pick to finish it is still a good idea. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Cable/Housing Cutter Suggestions

[Belopsky]

https://www.amazon.com/gp/product/B00125KG9C/ref=oh_aui_search_detailpage?ie=UTF8=1

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Cable/Housing Cutter Suggestions

[Broccoli Cog]

I just replaced a pair of Park CN-10's with a new pair. Mine had become dull 
from cutting a multitude of other things from cables to zipties. FWIW In order 
to improve  longevity my LBS recommended using the CN-10 for housing only and 
have a quality side cutter on hand for cables. I would avoid using them, like I 
did, for many things. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Cable/Housing Cutter Suggestions

[Joe Bernard]

I've heard this phrase, "side cutter", for years. What does it look like?

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Cable/Housing Cutter Suggestions

[Brett Callahan]

Hi Tim,

I use two cheapo tools I bought on Amazon. I'll try to link to them below, 
but here's what I've learned: spend a few bucks more. Pedro's tools makes a 
cable cutter that's widely available for $25 or so that I'm sure is better. 
My cable cutter works okay, but has started dulling after one bike's worth 
of cable cutting. The 'wire nipper' struggles to cut the steel inner of 
Jagwire brake cable housing. If you want 'just good enough', you can get by 
with these, but I'll be upgrading in the future. 

Sunyou cable cutter 


Wire Nipper 

 

Cheers,

Brett, also in Portland. 

On Tuesday, August 8, 2017 at 3:10:01 PM UTC-7, Tim O. (Portland, OR) wrote:
>
> I've been using a cheapo tool to cut cables and housing forever, but it's 
> always a clunky process that results in frayed cables and/or frustration. I 
> hate cutting housing so much that I just left my housing way too long when 
> I recently changed my shifters.
>
> Just did a quick search to see what's out there and it looks like $20-40 
> bucks for something specific to bikes for cutting cable/housing. Does 
> anyone have experiences they'd like to share? Do I want a bike specific 
> cable cutter or can I get a generic hardware store version? Is it worth it 
> to spend the extra few $$ on this tool or do they all work the same? 
>
> If Riv sold one, I'd just buy that version.
>
> Thanks!
> Tim
> Portland, OR
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] For sale- 2, 59cm Clems

[jim lynchIII]

I'm located in western New York State.  I can't for the life of me figure out 
how to post pictures, but if you go to Buffalo Craigslist, for sale, bikes and 
do a search for Rivendell, they will both pop up with pictures.  Thanks for 
your interest.  Jim

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] FS Rivendell Atlantis 64cm

[Tom Dusky]

Try this
https://goo.gl/photos/8HBmerj3Kkxo1aKs6

Thanks'
Tom

On Tue, Aug 8, 2017 at 10:38 PM, Eric Floden  wrote:

> I get a 404 error on the link...
>
> eric
> Ontario
>
> On Aug 8, 2017 10:30 PM, "tdusky"  wrote:
>
>> Hello
>>
>> Rivendell Atlantis 64cm
>>
>> 2006 Toyo build
>>
>> Shimano Ultegra headset
>>
>> Front Wheel
>>
>> 36 spokes DB stainless
>>
>> Velocity Synergy Rim
>>
>> Shimano Deore XT rim Riv Build
>>
>>
>> Rear wheel
>>
>> 40 spokes DB stainless
>>
>> Sun Rhino Lite Rim
>>
>> Formula Hub Pro Build
>>
>>
>> 46mm Nitto Noodle Handlebar
>>
>> Nitto Tecnomic Stem
>>
>> Brooke leather handlebar wrap shellacked
>>
>> Weinmann brake levers with gum hoods
>>
>> Campy Nuvo Record Bar end shifters
>>
>>
>> IDR Cantilever breaks
>>
>>
>> Sugino XD2 Crank, Triple 46x36x24 170mm
>>
>> Shimano Cartridge Bottom Bracket
>>
>>
>> Suntour Derailleurs
>>
>>
>> Avocet Touring II Saddle
>>
>>
>> Schwalbe Marathon 47mm almost new tires
>>
>>
>> 60mm Berthoud stainless steel fenders with leather mudflaps
>>
>>
>> Recent tune up that included New chain, rear derailleur cable, and rear
>> brake blocks
>>
>> Touch up paint included
>>
>>
>> $1600 pick up (in Detroit Michigan area or $100 shipped
>>
>>
>> Photos to view https://photos.google.com/album/AF1QipO8WSspPwByf2QZdor
>> 8ngdw0k7IrAj1EhsZdffc
>>
>>
>> Thanks
>>
>> Tom Dusky
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "RBW Owners Bunch" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
>> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
>> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "RBW Owners Bunch" group.
> To unsubscribe from this topic, visit https://groups.google.com/d/
> topic/rbw-owners-bunch/UfZ9MqDHnUo/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Cable/Housing Cutter Suggestions

[Surlyprof]

I use the Park and, as Eric pointed out, it does smash the ends.  Really sturdy 
with nice crimpers for cable ends.  It helps to rotate them while cutting but I 
still end up reopening the ends with an awl.  I'm sure an ice pick or any 
similar tool will do.

John

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: Roadini!

[Garth]

While the Roadini as is doesn't have the length I'd need and it's not meant for 
sweep back bars, that blue shade sure is pudy !  All this gives me more 
ideas for a custom though ☺  A sweep back(and higher) bar pure road bike !  I 
imagine the exact frame dimensions of my Bomba except with lighter tubes(no 2tt 
either) and clearances for tires like the Roadini and a road double crank.  No 
bolt-uprightness, more like 40-60 degrees give or take, which is how my Bomba 
is for me. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: 59 vs. 52 Clem L

[wesleya]

I'm more than a little tempted to scoop one up. Even with the wheelset, it 
would be a relatively gentle introduction to the world of Riv. I've just 
got to see how a few things work out.

Thanks again, y'all.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Saluki Links

[Tony DeFilippo]

I really 42mm GB EL Hetres with the sks fenders for a while.  Tight but 
manageable.  I've been running the 1.75" parimotos for about 2 years now under 
berthoud steel fenders and want to compass tires next... I saw the new BSP 42's 
are going to be wider and tube less compatible which has me worried about 
space.  I may try it anyway, I think the critical spot is at the chainstay yoke 
and I could probably take a Dremel to the fender there and open up some room.

If not maybe I'll go back to the Hetres. The parimotos are fine but don't have 
that 'magic'... (Or amazing marketing)

When I do it I'll share pictures.  My A23 rims are supposedly also tubeless 
ready so I might mess around with that to.

Tony

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: N minus 2 plus 1

[Garth]

I will add this about the sensation called "sporty" from this perspctive.. 
I find with 700c tires that tires in the 28-38mm range offer the best all 
around balance of everything. For road bikes, I grew up riding 27 x 1" to 
1-1/4" tires and later raced on 700c 25mm tires. I have nothing but positive 
memories of such riding. The feel of a real race bike with even narrow wheels 
and tires is utter joy. So I give pause to this trend of wider is better, it's 
not, its just wider, another sensation of riding. The riding never changes 
however ! 

Everyone will understand this, when you feel joy spring from your heart, you 
can be doing anything and it will be joyous. The doing does not spring forth 
the joy, the doing happens because of it. The joy already existed and the doing 
became irresistable and literally burst forth ☺  Such is the living of Life. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: Roadini!

[Garth]

The Bombadini ☺   I just couldn't help it !  

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: Schwalbe SV13 tube - $8 shipped

[Belopsky]

New in box 26" Schwalbe SV13

They are $9 on Compass pre-shipping, I'll ship for $8 total.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Possibly FS: 1986 Pinnarello Montello

[Davey Two Shoes]

Officially FS

http://www.ebay.com/itm/Vintage-Pinarello-Montello-Campagnolo-Columbus-SLX-/253084958341?hash=item3aed09fe85:g:k-UAAOSwdl9ZicNm

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: 59 vs. 52 Clem L

[Chris Birkenmaier]

I've been waiting for someone to mention this.  I scanned the newsletter 3 
times to find more information on the Clem based on the title and nothing 
was detailed on it.  I assumed that another communication would be 
forthcoming to discuss the topic but nothing to date has been brought up 
about it.

On Sunday, August 6, 2017 at 10:09:04 PM UTC-4, iamkeith wrote:
>
> Regarding "not getting one yet, and keeping it on the radar":  The subject 
> line of the recent newsletter said "last of the Clems," but then never 
> elaborated in the newsletter itself.  If you think you want one, I'm 
> thinking it might be good to do so sooner than later, or at least ask riv 
> what the future plans are.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Atlantis Fender recommendations

[Brett Callahan]

Hi John,

I've used the Velo Orange aluminum fenders on three different bikes and 
find them to be great. Lightweight, easier to install than SKS. I have a 
pair of their 65mm fenders in the garage awaiting their new bike. I'll be 
running these with Compass Snoqualmie Pass as well. Like the other VO 
fenders, they seem well made, and these big ones have a clever cutout in 
the rear drive side so as not to interfere with the chain. I've not had 
trouble with them doing light  trails, but if you're worried about front 
fender failure, (VO doesn't include a quick release) you can get a quick 
release from Portland Design Works and use it with the VO stays. 

Cheers,
Brett

On Monday, August 7, 2017 at 4:18:07 PM UTC-7, John G. wrote:
>
> Hey all,
>
> I'm looking to get some fenders on my Atlantis. Here's the criteria:
>
> - 700c wheels
> - Snoqualmie Pass 44mm tires. Would consider going to 38mms, but honestly, 
> I'd prefer to keep things fat. 50mm tires would be even better!
> - I mostly ride on the road, but occasionally hit some light gravel
> - I'd much prefer aluminum over plastic.
>
> I don't think Honjo makes a set that meets my requirements. Any other 
> recommendations, or am I wrong about Honjo?
>
> Thanks,
> John
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: FS: Nicely Built Orange 56 Hillborne, $1350

[Jonathan D.]

Do you have any pictures?

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Atlantis Fender recommendations

[Bill]

I'm using 52mm Velo Orange Zeppelins on Snoqualmie Pass tires with no issues. 
They're not overly roomy but I'm OK with what I've got. They'd be good with 
anything smaller, i.e., 42, 40, or 38. I've wrangled with Honjo installations 
before and these were much easier, even though they employ the same type of 
attachment.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: D2R2 2017

[Broccoli Cog]

I'll be there to ride the 100K. I'm riding alone so would love to meet other 
100K riders st the start so I don't have to suffer alone. Looking to ride and 
enjoy the challenge without it being a race to the finish. PM me if you want to 
meet up!

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: FS: Nicely Built Orange 56 Hillborne, $1350

[allenmichael]

I'll take some pictures the first chance I get. Maybe tomorrow. 

On Tuesday, August 8, 2017 at 8:53:28 AM UTC-7, allenmichael wrote:
>
> No pictures yet, but decided to sell his past weekend after a successful 
> ride through the Tillamook forest on a new-to-me Jones Bike.
>
> The bike was built by Rivendell for a friend of mine (who purchased for 
> his father). I'm the second owner. It has not seen much use and is in 
> excellent condition.
>
> From memory (and may need some added detail): Rich Lesnick wheels, 
> Albatross bars, cork grips, nitto stem and seat post, Brooks saddle, side 
> pull brakes, Sugino triple, grip king pedals.
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Headbadge Poster Update - Help Needed

[MartyG]

Thanks! 

On Monday, August 7, 2017 at 6:32:42 PM UTC-4, lconley wrote:
>
> On Monday, August 7, 2017 at 3:05:57 PM UTC-4, MartyG wrote: 
> > Would love to see it - the one I have is marginal. Thanks. 
> > 
> > On Monday, August 7, 2017 at 1:47:28 PM UTC-4, lconley wrote: 
> > I have a bronze version of the Clem Smith Jr. if you are interested. 
> > 
> > On Sunday, August 6, 2017 at 1:04:49 PM UTC-4, MartyG wrote: 
> > About time I updated the poster. Anyone have a good pic of the 
> Hubbuhubbuh headbadge? Can't seem to find on anywhere. Others in the queue 
> since this version are the Clem Smith, Roadini, ROscoe Bubbe and Frank 
> Jones Sr., although that doesn;t seem to have been used yet. Any others I'm 
> missing? PRefer hi-res shots from straight on, with a little space around 
> the badge for cropping. Look at all these and you'll get the idea. PM me if 
> you have questions and to get my email address.  
> > 
> > 
> > Thanks Bunch! 
> > 
> > 
> > Marty 
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Headbadge Poster Update - Help Needed

[MartyG]

I've actually had good luck at Walgreen's - if they have a photo section. 
When I lived in Chicago the local Walgreen's had a really nice printer, and 
the quality was quite good. They often have sales on poster-size prints 
too. 

On Monday, August 7, 2017 at 5:08:18 PM UTC-4, Reed Kennedy wrote:
>
> Yup, they're proud of it and say people ask them about it often!
>
> Happy to have it printed myself when the new version is done. Any 
> recommendations on where to have it done?
>
>
> Reed
>
> On Mon, Aug 7, 2017 at 12:09 PM, MartyG  > wrote:
>
>> Reed, and all, I printed/sold a few back in the day, but would rather 
>> just link you to the artwork on Flickr where you can download/print as you 
>> like. Once I update everything I'll post the new link. Nice to know Riv HQ 
>> has one up. I'm flattered! 
>>
>> On Monday, August 7, 2017 at 1:23:19 PM UTC-4, Reed Kennedy wrote:
>>>
>>> Hey Marty,
>>>
>>> I've wanted one of these posters since I saw one in the Rivendell HQ 
>>> dressing room a while ago!
>>>
>>> Do you ever have them printed up? Or are we on our own for that?
>>>
>>>
>>> Best,
>>> Reed
>>>
>>> On Sun, Aug 6, 2017 at 10:04 AM, MartyG  wrote:
>>>
 About time I updated the poster. Anyone have a good pic of the 
 Hubbuhubbuh headbadge? Can't seem to find on anywhere. Others in the queue 
 since this version are the Clem Smith, Roadini, ROscoe Bubbe and Frank 
 Jones Sr., although that doesn;t seem to have been used yet. Any others 
 I'm 
 missing? PRefer hi-res shots from straight on, with a little space around 
 the badge for cropping. Look at all these and you'll get the idea. PM me 
 if 
 you have questions and to get my email address. 

 Thanks Bunch!

 Marty


 

 -- 
 You received this message because you are subscribed to the Google 
 Groups "RBW Owners Bunch" group.
 To unsubscribe from this group and stop receiving emails from it, send 
 an email to rbw-owners-bun...@googlegroups.com.
 To post to this group, send email to rbw-owne...@googlegroups.com.
 Visit this group at https://groups.google.com/group/rbw-owners-bunch.
 For more options, visit https://groups.google.com/d/optout.

>>>
>>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "RBW Owners Bunch" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to rbw-owners-bun...@googlegroups.com .
>> To post to this group, send email to rbw-owne...@googlegroups.com 
>> .
>> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Saluki Links

[Joe Bernard]

Remember when Riv stuff came on paper in the mail and 650B was that crazy idea 
that would never catch on? Good times!

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] FS: Nicely Built Orange 56 Hillborne, $1350

[allenmichael]

No pictures yet, but decided to sell his past weekend after a successful 
ride through the Tillamook forest on a new-to-me Jones Bike.

The bike was built by Rivendell for a friend of mine (who purchased for his 
father). I'm the second owner. It has not seen much use and is in excellent 
condition.

>From memory (and may need some added detail): Rich Lesnick wheels, 
Albatross bars, cork grips, nitto stem and seat post, Brooks saddle, side 
pull brakes, Sugino triple, grip king pedals.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: FS: Nicely Built Orange 56 Hillborne, $1350

[allenmichael]

price does not include shipping. The bike is in Portland, Oregon. I could 
probably deliver it to many places in California or Southern Oregon.

On Tuesday, August 8, 2017 at 8:53:28 AM UTC-7, allenmichael wrote:
>
> No pictures yet, but decided to sell his past weekend after a successful 
> ride through the Tillamook forest on a new-to-me Jones Bike.
>
> The bike was built by Rivendell for a friend of mine (who purchased for 
> his father). I'm the second owner. It has not seen much use and is in 
> excellent condition.
>
> From memory (and may need some added detail): Rich Lesnick wheels, 
> Albatross bars, cork grips, nitto stem and seat post, Brooks saddle, side 
> pull brakes, Sugino triple, grip king pedals.
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
For more options, visit https://groups.google.com/d/optout.