Re: [TANKS] Re: Centurion mrk 5

2016-10-22 Thread OdysseySlipways via R/C Tank Combat 
so i take it all of thesee gears are also 3D printed?
 
chris
 
 
In a message dated 10/22/2016 7:20:26 A.M. Eastern Daylight Time,  
n...@live.dk writes:

 
 
(https://lh3.googleusercontent.com/-mX-R9oS8ViI/WAtK930_8LI/A5k/vKTn0ApcB0YiDG5hlzzepHcD8ydxDfaYQCLcB/s1600/BILD3323.JPG)
  
 
(https://lh3.googleusercontent.com/-kV5QNYTOdKg/WAtLG5cAzqI/A50/9SKggvUhClgtPcp-RL_exzWeTVy2g5BkgCLcB/s1600/BILD3327.JPG)
  
 
(https://lh3.googleusercontent.com/-_QD4RejlgrE/WAtLIobYLpI/A54/1_TgqLo9HGAAeRSLuF0ZyAIYyvK83cbZgCLcB/s1600/BILD3328.JPG)
  
 
(https://lh3.googleusercontent.com/-8EoyXFzhOx0/WAtK21fpqvI/A5c/70bRsE877TYQhELfJu3876bgGNt_DFVWQCLcB/s1600/BILD3321.JPG)
 


-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-10-22 Thread Niels Erik Kristensen 



































Now the assembling has startet:

Den tirsdag den 18. oktober 2016 kl. 08.08.10 UTC+2 skrev 
odyssey...@aol.com:
>
> ah, that's how you did it. i wasn't quite sure. nicely done!
>  
> chris
>  
> In a message dated 10/18/2016 12:18:46 A.M. Eastern Daylight Time, 
> ne...@live.dk  writes:
>
> [image: 
> https://lh3.googleusercontent.com/-NFu5_VUjuq4/WAWilkgKzGI/A5M/vU-Zpl3g1a4PHZ5Uf3I8O_3joOGRWcMigCLcB/s1600/BILD3046.JPG]
>  
> 
>
> [image: 
> https://lh3.googleusercontent.com/-lOWtr3QaE0o/WAWifahlHAI/A5I/3xu3naDFIVsbz6L5hm-UhXOrVp3zAB0uACLcB/s1600/BILD3045.JPG]
>  
> 
> Same way as Steve Tyng on his T34/85. I just use safety belts from a car, 
> and the track links are mounted with shrews.
>
> Den mandag den 17. oktober 2016 kl. 23.40.09 UTC+2 skrev 
> odyssey...@aol.com: 
>>
>> how do you connect your track links?
>>  
>> chris
>>  
>> In a message dated 10/17/2016 1:30:04 A.M. Eastern Daylight Time, 
>> ne...@live.dk writes:
>>
>> [image: 
>> https://lh3.googleusercontent.com/-YBqu7OsFA_U/WARhwG8X_mI/A4w/NdEl2jqvPo0LS4c62jTP-MQ_EB0iDPqUACLcB/s1600/BILD3317.JPG]
>>  
>> 
>>
>> [image: 
>> https://lh3.googleusercontent.com/-cZlwCU8cOuk/WARhyifJ0vI/A40/qDKZKDM_M6orgrDNcghiRnmHEKEeQA2DgCLcB/s1600/BILD3318.JPG]
>>  
>> 
>>
>> [image: 
>> https://lh3.googleusercontent.com/-qpLesnVOxTc/WARh1JE5b0I/A44/Rf-arJKnW-QeyFkoupFijE6VvLcC6dsiACLcB/s1600/BILD3320.JPG]
>>  
>> 
>>
>> [image: 
>> https://lh3.googleusercontent.com/-MW3v5OLYpko/WARhtWv7BNI/A4s/bQW-KTqdTngDrCEPbsIgBE0Pj9dHZzebQCLcB/s1600/BILD3316.JPG]
>>  
>> 
>> Everything hold up wherry good-I have broken a road wheel onse and 2 
>> suspensions arms. But it is easy just to print a new spare part. My traks 
>> are spray paintet flat black, and i hope that the paint will wear off on 
>> the part that tutces the ground, and on the sprocket. It will give a more 
>> realistic look.
>>
>> Den mandag den 17. oktober 2016 kl. 06.15.10 UTC+2 skrev 
>> odyssey...@aol.com: 
>>>

Re: [TANKS] Re: Centurion mrk 5

2016-10-18 Thread OdysseySlipways via R/C Tank Combat 
ah, that's how you did it. i wasn't quite sure. nicely done!
 
chris
 
 
In a message dated 10/18/2016 12:18:46 A.M. Eastern Daylight Time,  
n...@live.dk writes:

 
 
(https://lh3.googleusercontent.com/-NFu5_VUjuq4/WAWilkgKzGI/A5M/vU-Zpl3g1a4PHZ5Uf3I8O_3joOGRWcMigCLcB/s1600/BILD3046.JPG)
  
 
(https://lh3.googleusercontent.com/-lOWtr3QaE0o/WAWifahlHAI/A5I/3xu3naDFIVsbz6L5hm-UhXOrVp3zAB0uACLcB/s1600/BILD3045.JPG)
 Same way as Steve 
Tyng on his T34/85. I just use  safety belts from a car, and the track links 
are mounted with  shrews.

Den mandag den 17. oktober 2016 kl. 23.40.09 UTC+2 skrev  
odyssey...@aol.com:  
 
how do you connect your track links?
 
chris
 
 
In a message dated 10/17/2016 1:30:04 A.M. Eastern Daylight Time, 
_ne...@live.dk_ (javascript:)  writes:

 
 
(https://lh3.googleusercontent.com/-YBqu7OsFA_U/WARhwG8X_mI/A4w/NdEl2jqvPo0LS4c62jTP-MQ_EB0iDPqUACLcB/s1600/BILD3317.JPG)
  
 
(https://lh3.googleusercontent.com/-cZlwCU8cOuk/WARhyifJ0vI/A40/qDKZKDM_M6orgrDNcghiRnmHEKEeQA2DgCLcB/s1600/BILD3318.JPG)
  
 
(https://lh3.googleusercontent.com/-qpLesnVOxTc/WARh1JE5b0I/A44/Rf-arJKnW-QeyFkoupFijE6VvLcC6dsiACLcB/s1600/BILD3320.JPG)
  
 
(https://lh3.googleusercontent.com/-MW3v5OLYpko/WARhtWv7BNI/A4s/bQW-KTqdTngDrCEPbsIgBE0Pj9dHZzebQCLcB/s1600/BILD3316.JPG)
 Everything hold up 
wherry good-I have broken  a road wheel onse and 2 suspensions arms. But it 
is easy just to print a  new spare part. My traks are spray paintet flat 
black, and i hope that the  paint will wear off on the part that tutces the 
ground, and on the  sprocket. It will give a more realistic look.

Den mandag den 17.  oktober 2016 kl. 06.15.10 UTC+2 skrev 
odyssey...@aol.com:  
 
those are nice looking tracks and wheels, just can't believe they  are 3D 
printed and look so clean, do you have any close up pictures of  the track 
links? how is the sprocket wheel holding up so far?
 
Chris
 
 
In a message dated 10/16/2016 1:53:06 P.M. Eastern Daylight Time,  
ne...@live.dk writes:


Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev  Niels Erik 
Kristensen:  
Hey. iam making a Centurion mrk 5 Danish version.  
All moving parts made with my 3D printer. Brushless motors and  lipo 
battery .
First track test today:
_https://www.youtube.com/watch?https://www.y_ 
(https://www.youtube.com/watch?v=iXr4a3K6Jd8) 







-- 
-- 
You are currently subscribed to the "R/C Tank Combat"  group.
To post a message, send email to _rctank...@googlegroups.com_ (javascript:) 
To  unsubscribe, send email to _rctankcombat...@rctankcombat...@_ 
(javascript:) 
Visit  the group at _http://groups.google.com/http://groups.goog_ 
(http://groups.google.com/group/rctankcombat) 

---  
You received this message because you are subscribed to the Google  Groups 
"R/C Tank Combat" group.
To unsubscribe from this group and stop  receiving emails from it, send an 
email to _rctankcombat...@rctankcombat...@_ (javascript:) .
For  more options, visit _https://groups.google.com/d/https:_ 
(https://groups.google.com/d/optout) .





-- 
-- 
You are currently subscribed to the "R/C Tank Combat"  group.
To post a message, send email to rctankcombat@googlegroups.com
To  unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit  the group at http://groups.google.com/group/rctankcombat

---  
You received this message because you are subscribed to the Google Groups  
"R/C Tank Combat" group.
To unsubscribe from this group and stop receiving  emails from it, send an 
email to _rctankcombat+unsubscribe@googlegroups.com_ 
(mailto:rctankcombat+unsubscr...@googlegroups.com) .
For  more options, visit https://groups.google.com/d/optout.

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-10-17 Thread Niels Erik Kristensen 





Same way as Steve Tyng on his T34/85. I just use safety belts from a car, 
and the track links are mounted with shrews.

Den mandag den 17. oktober 2016 kl. 23.40.09 UTC+2 skrev odyssey...@aol.com:
>
> how do you connect your track links?
>  
> chris
>  
> In a message dated 10/17/2016 1:30:04 A.M. Eastern Daylight Time, 
> ne...@live.dk  writes:
>
> [image: 
> https://lh3.googleusercontent.com/-YBqu7OsFA_U/WARhwG8X_mI/A4w/NdEl2jqvPo0LS4c62jTP-MQ_EB0iDPqUACLcB/s1600/BILD3317.JPG]
>  
> 
>
> [image: 
> https://lh3.googleusercontent.com/-cZlwCU8cOuk/WARhyifJ0vI/A40/qDKZKDM_M6orgrDNcghiRnmHEKEeQA2DgCLcB/s1600/BILD3318.JPG]
>  
> 
>
> [image: 
> https://lh3.googleusercontent.com/-qpLesnVOxTc/WARh1JE5b0I/A44/Rf-arJKnW-QeyFkoupFijE6VvLcC6dsiACLcB/s1600/BILD3320.JPG]
>  
> 
>
> [image: 
> https://lh3.googleusercontent.com/-MW3v5OLYpko/WARhtWv7BNI/A4s/bQW-KTqdTngDrCEPbsIgBE0Pj9dHZzebQCLcB/s1600/BILD3316.JPG]
>  
> 
> Everything hold up wherry good-I have broken a road wheel onse and 2 
> suspensions arms. But it is easy just to print a new spare part. My traks 
> are spray paintet flat black, and i hope that the paint will wear off on 
> the part that tutces the ground, and on the sprocket. It will give a more 
> realistic look.
>
> Den mandag den 17. oktober 2016 kl. 06.15.10 UTC+2 skrev 
> odyssey...@aol.com: 
>>
>> those are nice looking tracks and wheels, just can't believe they are 3D 
>> printed and look so clean, do you have any close up pictures of the track 
>> links? how is the sprocket wheel holding up so far?
>>  
>> Chris
>>  
>> In a message dated 10/16/2016 1:53:06 P.M. Eastern Daylight Time, 
>> ne...@live.dk writes:
>>
>>
>> Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik 
>> Kristensen: 
>>>
>>> Hey. iam making a Centurion mrk 5 Danish version. 
>>> All moving parts made with my 3D printer. Brushless motors and lipo 
>>> battery .
>>> First track test today:
>>> https://www.youtube.com/watch?v=iXr4a3K6Jd8
>>>
>> -- 
> -- 
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctank...@googlegroups.com 
> To unsubscribe, send email to rctankcombat...@googlegroups.com 
> 
> Visit the group at http://groups.google.com/group/rctankcombat
>
> --- 
> You received this message because you are subscribed to the Google Groups 
> "R/C Tank Combat" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to rctankcombat...@googlegroups.com .
> For more options, visit https://groups.google.com/d/optout.
>
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-10-16 Thread Niels Erik Kristensen 
The marks that you can see on the inside track lings, are made with a 
grinder!!  I use a square pies of aluminium in my solder iron to melt hule 
trough the safety belt between the track links-And a grinder to remove the 
melted plastic

Den mandag den 17. oktober 2016 kl. 07.30.03 UTC+2 skrev Niels Erik 
Kristensen:
>
>
> 
>
>
> 
>
>
> 
>
>
> 
> Everything hold up wherry good-I have broken a road wheel onse and 2 
> suspensions arms. But it is easy just to print a new spare part. My traks 
> are spray paintet flat black, and i hope that the paint will wear off on 
> the part that tutces the ground, and on the sprocket. It will give a more 
> realistic look.
>
> Den mandag den 17. oktober 2016 kl. 06.15.10 UTC+2 skrev 
> odyssey...@aol.com:
>>
>> those are nice looking tracks and wheels, just can't believe they are 3D 
>> printed and look so clean, do you have any close up pictures of the track 
>> links? how is the sprocket wheel holding up so far?
>>  
>> Chris
>>  
>> In a message dated 10/16/2016 1:53:06 P.M. Eastern Daylight Time, 
>> ne...@live.dk writes:
>>
>>
>> Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik 
>> Kristensen: 
>>>
>>> Hey. iam making a Centurion mrk 5 Danish version. 
>>> All moving parts made with my 3D printer. Brushless motors and lipo 
>>> battery .
>>> First track test today:
>>> https://www.youtube.com/watch?v=iXr4a3K6Jd8
>>>
>>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-10-16 Thread Niels Erik Kristensen 









Everything hold up wherry good-I have broken a road wheel onse and 2 
suspensions arms. But it is easy just to print a new spare part. My traks 
are spray paintet flat black, and i hope that the paint will wear off on 
the part that tutces the ground, and on the sprocket. It will give a more 
realistic look.

Den mandag den 17. oktober 2016 kl. 06.15.10 UTC+2 skrev odyssey...@aol.com:
>
> those are nice looking tracks and wheels, just can't believe they are 3D 
> printed and look so clean, do you have any close up pictures of the track 
> links? how is the sprocket wheel holding up so far?
>  
> Chris
>  
> In a message dated 10/16/2016 1:53:06 P.M. Eastern Daylight Time, 
> ne...@live.dk  writes:
>
>
> Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik 
> Kristensen: 
>>
>> Hey. iam making a Centurion mrk 5 Danish version. 
>> All moving parts made with my 3D printer. Brushless motors and lipo 
>> battery .
>> First track test today:
>> https://www.youtube.com/watch?v=iXr4a3K6Jd8
>>
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-10-16 Thread OdysseySlipways via R/C Tank Combat 
those are nice looking tracks and wheels, just can't believe they are 3D  
printed and look so clean, do you have any close up pictures of the track 
links?  how is the sprocket wheel holding up so far?
 
Chris
 
 
In a message dated 10/16/2016 1:53:06 P.M. Eastern Daylight Time,  
n...@live.dk writes:


Den  mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik 
Kristensen:  
Hey. iam making a Centurion mrk 5 Danish version.  
All moving parts made with my 3D printer. Brushless motors and lipo  
battery .
First track test today:
_https://www.youtube.com/watch?https://www.y_ 
(https://www.youtube.com/watch?v=iXr4a3K6Jd8) 



-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-10-16 Thread Niels Erik Kristensen 















Now iam redy to assemble my Centurion mrk 5 tank, after painting all the 
parts

Den søndag den 25. september 2016 kl. 18.25.09 UTC+2 skrev jmaxhl23:
>
> Very impressive!! Nice work and you are very lucky to get side by side 
> with the real thing!! 
>
> Jean-Maxime Cyr St-Pierre
>
> Le 25 sept. 2016 11:56 AM, "Niels Erik Kristensen"  > a écrit :
>
>>
>> 
>>
>>
>> 
>>
>>
>> 
>>
>>
>> 
>>
>>
>> 
>>
>>
>> 
>>
>>
>> 
>> Painting of my Centurion in progress. I have the fortune to visit a 
>> garage where old retried tank crews are holding some old tanks in mint 
>> condition. They get out to shoot ones a year, and precipitate in shows 
>> around Denmark. On my wisit i got 5 liters of the original green color with 
>> me , to use on my Centurion mrk 5. Tery loved my tank, and i have promised 
>> to come back when i am are finis building it ;.)
>>
>> Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik 
>> Kristensen:
>>>
>>> Hey. iam making a Centurion mrk 5 Danish version.
>>> All moving parts made with my 3D printer. Brushless motors and lipo 
>>> battery .
>>> First track test today:
>>> https://www.youtube.com/watch?v=iXr4a3K6Jd8
>>>
>> -- 
>> -- 
>> You are currently subscribed to the "R/C Tank Combat" group.
>> To post a message, send email to rctank...@googlegroups.com 
>> To unsubscribe, send email to rctankcombat...@googlegroups.com 
>> 
>> Visit the group at http://groups.google.com/group/rctankcombat
>>
>> --- 
>> You received this message because you are subscribed to the Google Groups 
>> "R/C Tank Combat" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to rctankcombat...@googlegroups.com .
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-08-02 Thread Niels Erik Kristensen 
I dont have the opportunity to try that yet-But it will come one day  :-)


Den tirsdag den 2. august 2016 kl. 14.27.23 UTC+2 skrev Frank Pittelli:
>
> By "stress test", I think he means something like driving full speed over 
> an obstacle that generates a lot of dynamic stress on the parts, such as in 
> this video:
>
> https://youtu.be/qkO4s0F5AyQ
>
> Driving on flat surfaces with a heavy load is a good test, but driving 
> into and over things at full speed is the ultimate test of a vehicle :--)
>
> On Aug 2, 2016 1:25 AM, "Niels Erik Kristensen"  > wrote:
>
>> The turret are made of fiberglass. And i have made several strestests : 
>> https://www.youtube.com/watch?v=3qGgA0uKl-o
>>
>>
>> 
>>
>>
>> 
>>
>>
>> Den tirsdag den 2. august 2016 kl. 04.10.10 UTC+2 skrev jvragu47:
>>>
>>> Looks very nice.  For your next video, how about a little stress test of 
>>> the suspension please? Thank you.
>>>
>>> On Monday, August 1, 2016 at 5:22:30 PM UTC-4, Niels Erik Kristensen 
>>> wrote:

 Now i have tested my PLA printed Centurion over 2 months, and there are 
 no sign of damage on the mowing parts ( gears and tracks) Here are a video 
 from a event where i was driving in front of spectators for fun:
 https://www.youtube.com/watch?v=pEo3s8yDLEA=youtu.be

 Den tirsdag den 19. april 2016 kl. 08.39.21 UTC+2 skrev Niels Erik 
 Kristensen:
>
> Pla are strongere than ABS-But not elastic. Its almost like the cast 
> iron of plastic. Make a solid 4-5mm pla part and se for yourself. ABS 
> stinks when printet-And wrap alot during the printing. In Denmark where i 
> live,high temperature are rare. And if one parts break i can easyly print 
> a 
> new one.
> By the way-Wood are also bio degradeable-And it will degrade faster 
> than PLA-Maby paintball filled with termittes will work better :-)
>
>
> Den tirsdag den 19. april 2016 kl. 08.26.25 UTC+2 skrev Niels Erik 
> Kristensen:
>>
>> Most of my parts are printet with 99% infill-Ore vith 2mm walls and 
>> 20 % infil
>>
>> Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith:
>>>
>>> What you have to worry more about PLA is its warpage in the heat.  
>>> PLA parts will begin to warp if left in a hot car or possibly just 
>>> leaving 
>>> your tank in the sun. Printing with ABS will eliminate warpage and 
>>> yield 
>>> stronger parts, but for true durability you should look into nylon.
>>
>> -- 
>> -- 
>> You are currently subscribed to the "R/C Tank Combat" group.
>> To post a message, send email to rctank...@googlegroups.com 
>> To unsubscribe, send email to rctankcombat...@googlegroups.com 
>> 
>> Visit the group at http://groups.google.com/group/rctankcombat
>>
>> --- 
>> You received this message because you are subscribed to the Google Groups 
>> "R/C Tank Combat" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to rctankcombat...@googlegroups.com .
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-08-02 Thread Frank Pittelli 
By "stress test", I think he means something like driving full speed over
an obstacle that generates a lot of dynamic stress on the parts, such as in
this video:

https://youtu.be/qkO4s0F5AyQ

Driving on flat surfaces with a heavy load is a good test, but driving into
and over things at full speed is the ultimate test of a vehicle :--)

On Aug 2, 2016 1:25 AM, "Niels Erik Kristensen"  wrote:

> The turret are made of fiberglass. And i have made several strestests :
> https://www.youtube.com/watch?v=3qGgA0uKl-o
>
>
> 
>
>
> 
>
>
> Den tirsdag den 2. august 2016 kl. 04.10.10 UTC+2 skrev jvragu47:
>>
>> Looks very nice.  For your next video, how about a little stress test of
>> the suspension please? Thank you.
>>
>> On Monday, August 1, 2016 at 5:22:30 PM UTC-4, Niels Erik Kristensen
>> wrote:
>>>
>>> Now i have tested my PLA printed Centurion over 2 months, and there are
>>> no sign of damage on the mowing parts ( gears and tracks) Here are a video
>>> from a event where i was driving in front of spectators for fun:
>>> https://www.youtube.com/watch?v=pEo3s8yDLEA=youtu.be
>>>
>>> Den tirsdag den 19. april 2016 kl. 08.39.21 UTC+2 skrev Niels Erik
>>> Kristensen:

 Pla are strongere than ABS-But not elastic. Its almost like the cast
 iron of plastic. Make a solid 4-5mm pla part and se for yourself. ABS
 stinks when printet-And wrap alot during the printing. In Denmark where i
 live,high temperature are rare. And if one parts break i can easyly print a
 new one.
 By the way-Wood are also bio degradeable-And it will degrade faster
 than PLA-Maby paintball filled with termittes will work better :-)


 Den tirsdag den 19. april 2016 kl. 08.26.25 UTC+2 skrev Niels Erik
 Kristensen:
>
> Most of my parts are printet with 99% infill-Ore vith 2mm walls and 20
> % infil
>
> Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith:
>>
>> What you have to worry more about PLA is its warpage in the heat.
>> PLA parts will begin to warp if left in a hot car or possibly just 
>> leaving
>> your tank in the sun. Printing with ABS will eliminate warpage and yield
>> stronger parts, but for true durability you should look into nylon.
>
> --
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
> Visit the group at http://groups.google.com/group/rctankcombat
>
> ---
> You received this message because you are subscribed to the Google Groups
> "R/C Tank Combat" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to rctankcombat+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-08-01 Thread Niels Erik Kristensen 


Den tirsdag den 2. august 2016 kl. 07.25.56 UTC+2 skrev Niels Erik 
Kristensen:
>
> The turret are made of fiberglass. And i have made several strestests : 
> https://www.youtube.com/watch?v=3qGgA0uKl-o
>
>
> 
>
>
> 
>
>
> Den tirsdag den 2. august 2016 kl. 04.10.10 UTC+2 skrev jvragu47:
>>
>> Looks very nice.  For your next video, how about a little stress test of 
>> the suspension please? Thank you.
>>
>> On Monday, August 1, 2016 at 5:22:30 PM UTC-4, Niels Erik Kristensen 
>> wrote:
>>>
>>> Now i have tested my PLA printed Centurion over 2 months, and there are 
>>> no sign of damage on the mowing parts ( gears and tracks) Here are a video 
>>> from a event where i was driving in front of spectators for fun:
>>> https://www.youtube.com/watch?v=pEo3s8yDLEA=youtu.be
>>>
>>> Den tirsdag den 19. april 2016 kl. 08.39.21 UTC+2 skrev Niels Erik 
>>> Kristensen:

 Pla are strongere than ABS-But not elastic. Its almost like the cast 
 iron of plastic. Make a solid 4-5mm pla part and se for yourself. ABS 
 stinks when printet-And wrap alot during the printing. In Denmark where i 
 live,high temperature are rare. And if one parts break i can easyly print 
 a 
 new one.
 By the way-Wood are also bio degradeable-And it will degrade faster 
 than PLA-Maby paintball filled with termittes will work better :-)


 Den tirsdag den 19. april 2016 kl. 08.26.25 UTC+2 skrev Niels Erik 
 Kristensen:
>
> Most of my parts are printet with 99% infill-Ore vith 2mm walls and 20 
> % infil
>
> Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith:
>>
>> What you have to worry more about PLA is its warpage in the heat. 
>>  PLA parts will begin to warp if left in a hot car or possibly just 
>> leaving 
>> your tank in the sun. Printing with ABS will eliminate warpage and yield 
>> stronger parts, but for true durability you should look into nylon.
>
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-08-01 Thread Niels Erik Kristensen 
The turret are made of fiberglass. And i have made several strestests 
: https://www.youtube.com/watch?v=3qGgA0uKl-o






Den tirsdag den 2. august 2016 kl. 04.10.10 UTC+2 skrev jvragu47:
>
> Looks very nice.  For your next video, how about a little stress test of 
> the suspension please? Thank you.
>
> On Monday, August 1, 2016 at 5:22:30 PM UTC-4, Niels Erik Kristensen wrote:
>>
>> Now i have tested my PLA printed Centurion over 2 months, and there are 
>> no sign of damage on the mowing parts ( gears and tracks) Here are a video 
>> from a event where i was driving in front of spectators for fun:
>> https://www.youtube.com/watch?v=pEo3s8yDLEA=youtu.be
>>
>> Den tirsdag den 19. april 2016 kl. 08.39.21 UTC+2 skrev Niels Erik 
>> Kristensen:
>>>
>>> Pla are strongere than ABS-But not elastic. Its almost like the cast 
>>> iron of plastic. Make a solid 4-5mm pla part and se for yourself. ABS 
>>> stinks when printet-And wrap alot during the printing. In Denmark where i 
>>> live,high temperature are rare. And if one parts break i can easyly print a 
>>> new one.
>>> By the way-Wood are also bio degradeable-And it will degrade faster than 
>>> PLA-Maby paintball filled with termittes will work better :-)
>>>
>>>
>>> Den tirsdag den 19. april 2016 kl. 08.26.25 UTC+2 skrev Niels Erik 
>>> Kristensen:

 Most of my parts are printet with 99% infill-Ore vith 2mm walls and 20 
 % infil

 Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith:
>
> What you have to worry more about PLA is its warpage in the heat.  PLA 
> parts will begin to warp if left in a hot car or possibly just leaving 
> your 
> tank in the sun. Printing with ABS will eliminate warpage and yield 
> stronger parts, but for true durability you should look into nylon.



-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-08-01 Thread Jean St-Pierre 
It's looking super good!!!

Nice work and looking foward to see this tank fully operationnal!!!

It's sure proof that 3d printing is the new way to make things!!

Do your turret is entirely 3d printed??? It's looking so nice as the
original casted one...

Jean-Maxime Cyr St-Pierre

Le 1 août 2016 5:22 PM, "Niels Erik Kristensen"  a écrit :

> Now i have tested my PLA printed Centurion over 2 months, and there are no
> sign of damage on the mowing parts ( gears and tracks) Here are a video
> from a event where i was driving in front of spectators for fun:
> https://www.youtube.com/watch?v=pEo3s8yDLEA=youtu.be
>
> Den tirsdag den 19. april 2016 kl. 08.39.21 UTC+2 skrev Niels Erik
> Kristensen:
>>
>> Pla are strongere than ABS-But not elastic. Its almost like the cast iron
>> of plastic. Make a solid 4-5mm pla part and se for yourself. ABS stinks
>> when printet-And wrap alot during the printing. In Denmark where i
>> live,high temperature are rare. And if one parts break i can easyly print a
>> new one.
>> By the way-Wood are also bio degradeable-And it will degrade faster than
>> PLA-Maby paintball filled with termittes will work better :-)
>>
>>
>> Den tirsdag den 19. april 2016 kl. 08.26.25 UTC+2 skrev Niels Erik
>> Kristensen:
>>>
>>> Most of my parts are printet with 99% infill-Ore vith 2mm walls and 20 %
>>> infil
>>>
>>> Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith:

 What you have to worry more about PLA is its warpage in the heat.  PLA
 parts will begin to warp if left in a hot car or possibly just leaving your
 tank in the sun. Printing with ABS will eliminate warpage and yield
 stronger parts, but for true durability you should look into nylon.
>>>
>>> --
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
> Visit the group at http://groups.google.com/group/rctankcombat
>
> ---
> You received this message because you are subscribed to the Google Groups
> "R/C Tank Combat" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to rctankcombat+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-08-01 Thread Niels Erik Kristensen 
Now i have tested my PLA printed Centurion over 2 months, and there are no 
sign of damage on the mowing parts ( gears and tracks) Here are a video 
from a event where i was driving in front of spectators for fun:
https://www.youtube.com/watch?v=pEo3s8yDLEA=youtu.be

Den tirsdag den 19. april 2016 kl. 08.39.21 UTC+2 skrev Niels Erik 
Kristensen:
>
> Pla are strongere than ABS-But not elastic. Its almost like the cast iron 
> of plastic. Make a solid 4-5mm pla part and se for yourself. ABS stinks 
> when printet-And wrap alot during the printing. In Denmark where i 
> live,high temperature are rare. And if one parts break i can easyly print a 
> new one.
> By the way-Wood are also bio degradeable-And it will degrade faster than 
> PLA-Maby paintball filled with termittes will work better :-)
>
>
> Den tirsdag den 19. april 2016 kl. 08.26.25 UTC+2 skrev Niels Erik 
> Kristensen:
>>
>> Most of my parts are printet with 99% infill-Ore vith 2mm walls and 20 % 
>> infil
>>
>> Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith:
>>>
>>> What you have to worry more about PLA is its warpage in the heat.  PLA 
>>> parts will begin to warp if left in a hot car or possibly just leaving your 
>>> tank in the sun. Printing with ABS will eliminate warpage and yield 
>>> stronger parts, but for true durability you should look into nylon.
>>
>>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-04-19 Thread Niels Erik Kristensen 
Pla are strongere than ABS-But not elastic. Its almost like the cast iron 
of plastic. Make a solid 4-5mm pla part and se for yourself. ABS stinks 
when printet-And wrap alot during the printing. In Denmark where i 
live,high temperature are rare. And if one parts break i can easyly print a 
new one.
By the way-Wood are also bio degradeable-And it will degrade faster than 
PLA-Maby paintball filled with termittes will work better :-)


Den tirsdag den 19. april 2016 kl. 08.26.25 UTC+2 skrev Niels Erik 
Kristensen:
>
> Most of my parts are printet with 99% infill-Ore vith 2mm walls and 20 % 
> infil
>
> Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith:
>>
>> What you have to worry more about PLA is its warpage in the heat.  PLA 
>> parts will begin to warp if left in a hot car or possibly just leaving your 
>> tank in the sun. Printing with ABS will eliminate warpage and yield 
>> stronger parts, but for true durability you should look into nylon.
>
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-04-19 Thread Niels Erik Kristensen 
Most of my parts are printet with 99% infill-Ore vith 2mm walls and 20 % 
infil

Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith:
>
> What you have to worry more about PLA is its warpage in the heat.  PLA 
> parts will begin to warp if left in a hot car or possibly just leaving your 
> tank in the sun. Printing with ABS will eliminate warpage and yield 
> stronger parts, but for true durability you should look into nylon.

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-04-18 Thread 'wsmontg5' via R/C Tank Combat 
I am not sure percent fill the parts are being printed at. But my PLA at 20% 
fill treads don't last very long. 

Will Montgomery 


Sent on a Virgin Mobile Samsung Galaxy S® III

 Original message From: Niels Erik Kristensen 
<n...@live.dk> Date:04/18/2016  4:41 PM  (GMT-05:00) To: 
R/C Tank Combat <rctankcombat@googlegroups.com> Subject: Re: [TANKS] 
Re: Centurion mrk 5 
Yes thats right :-)-tests have been made-After one year outside in sun 
and rain, an objeckt made of pla will get pale, but nothing are seen on the 
plastic. 
The most common form of bioplastic is polylactide acid or PLA and is made out 
of corn. Unfortunately, in order for PLA do biodegrade, it needs a certain kind 
of bacteria at just the right temperature. These are not found in landfills, 
(where most plastic bags end up), but require treatment at one of 42 commercial 
composting facilities in the U.S.

So i will not take my Centurion near one of the 42 composting facilities-But 
just stay in Denmark-And my tank will be safe :-)


Den mandag den 18. april 2016 kl. 20.50.18 UTC+2 skrev TyngTech:
PLA?  That's biodegradable so don't let it get wet for any length of time.  
Awesome work btw.

ST


On Thursday, April 14, 2016 at 2:38:11 PM UTC-4, Niels Erik Kristensen wrote:
Iam using thise motors: 
http://www.hobbyking.com/hobbyking/store/__8490__Turnigy_4258_Brushless_Motor_800kv.html
I print everything in PLA. And the thing around my motors are a cooling tube, 
with 2*45mm fan units in the top-Its home made like everything om my tank, i 
also made all drawings. I dont no yet if there are ant wear on my gears-But i 
can se wear marks on the tracks 

Den torsdag den 14. april 2016 kl. 18.36.26 UTC+2 skrev Jean-Maxime Cyr 
St-Pierre:
Super job!! Look anwsome!!

I got few questions...!

What size your airplane motors are ??

What material your using for your gears?? I know there is new wires to make 
super strong gearing out of nylon...

What is the thing you made up for not overheating your motor?

And after all this did you see any sign of wear on any of your part?? Because 
your project seem to proof that the futur of our hobby pass by the 3d printing 
like almost in any hobby it seems...!!

Thank you

Jean-Maxime Cyr St-Pierre


 
De : rctank...@googlegroups.com <rctank...@googlegroups.com> de la part de 
Niels Erik Kristensen <ne...@live.dk>
Envoyé : 12 avril 2016 17:09
À : R/C Tank Combat
Objet : [TANKS] Re: Centurion mrk 5
 
Final stres test before i continue the build-All test OK 
https://www.youtube.com/watch?v=3qGgA0uKl-o

Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik Kristensen:
Hey. iam making a Centurion mrk 5 Danish version.
All moving parts made with my 3D printer. Brushless motors and lipo battery .
First track test today:
https://www.youtube.com/watch?v=iXr4a3K6Jd8

Centurion 1/6 Track test
www.youtube.com
Første test af motor + gear+ bælte på min hjemme byggede centurion i størelse 
1-6. Alle dele er printet i PLA på min 3D printer ( Undtaget selve karosseriet )

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctank...@googlegroups.com
To unsubscribe, send email to rctankcombat...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-04-18 Thread TyngTech 
Hmm...   Bacteria loaded paintballs.  Biological warfare comes to 
RCTankcombat!   ;-)



On Monday, April 18, 2016 at 4:41:49 PM UTC-4, Niels Erik Kristensen wrote:
>
> Yes thats right :-)-tests have been made-After one year outside in sun and 
> rain, an objeckt made of pla will get pale, but nothing are seen on the 
> plastic. 
> The most common form of bioplastic is polylactide acid or PLA and is made 
> out of corn. Unfortunately, in order for PLA do biodegrade, it needs a 
> certain kind of bacteria at just the right temperature. These are not found 
> in landfills, (where most plastic bags end up), but require treatment at 
> one of 42 commercial composting facilities in the U.S.
>
> So i will not take my Centurion near one of the 42 composting 
> facilities-But just stay in Denmark-And my tank will be safe :-)
>
>
> Den mandag den 18. april 2016 kl. 20.50.18 UTC+2 skrev TyngTech:
>>
>> PLA?  That's biodegradable so don't let it get wet for any length of 
>> time.  Awesome work btw.
>>
>> ST
>>
>>
>> On Thursday, April 14, 2016 at 2:38:11 PM UTC-4, Niels Erik Kristensen 
>> wrote:
>>>
>>> Iam using thise motors: 
>>> http://www.hobbyking.com/hobbyking/store/__8490__Turnigy_4258_Brushless_Motor_800kv.html
>>> I print everything in PLA. And the thing around my motors are a cooling 
>>> tube, with 2*45mm fan units in the top-Its home made like everything om my 
>>> tank, i also made all drawings. I dont no yet if there are ant wear on my 
>>> gears-But i can se wear marks on the tracks 
>>>
>>> Den torsdag den 14. april 2016 kl. 18.36.26 UTC+2 skrev Jean-Maxime Cyr 
>>> St-Pierre:

 Super job!! Look anwsome!!

 I got few questions...!

 What size your airplane motors are ??

 What material your using for your gears?? I know there is new wires to 
 make super strong gearing out of nylon...

 What is the thing you made up for not overheating your motor?

 And after all this did you see any sign of wear on any of your part?? 
 Because your project seem to proof that the futur of our hobby pass by the 
 3d printing like almost in any hobby it seems...!!

 Thank you

 Jean-Maxime Cyr St-Pierre 


 --
 *De :* rctank...@googlegroups.com  de la 
 part de Niels Erik Kristensen 
 *Envoyé :* 12 avril 2016 17:09
 *À :* R/C Tank Combat
 *Objet :* [TANKS] Re: Centurion mrk 5 
  
 Final stres test before i continue the build-All test OK  
 https://www.youtube.com/watch?v=3qGgA0uKl-o

 Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik 
 Kristensen: 
>
> Hey. iam making a Centurion mrk 5 Danish version. 
> All moving parts made with my 3D printer. Brushless motors and lipo 
> battery .
> First track test today:
> https://www.youtube.com/watch?v=iXr4a3K6Jd8 
> 
> Centurion 1/6 Track test 
> www.youtube.com
> Første test af motor + gear+ bælte på min hjemme byggede centurion i 
> størelse 1-6. Alle dele er printet i PLA på min 3D printer ( Undtaget 
> selve 
> karosseriet )
>
> -- 
 -- 
 You are currently subscribed to the "R/C Tank Combat" group.
 To post a message, send email to rctank...@googlegroups.com
 To unsubscribe, send email to rctankcombat...@googlegroups.com
 Visit the group at http://groups.google.com/group/rctankcombat

 --- 
 You received this message because you are subscribed to the Google 
 Groups "R/C Tank Combat" group.
 To unsubscribe from this group and stop receiving emails from it, send 
 an email to rctankcombat...@googlegroups.com.
 For more options, visit https://groups.google.com/d/optout.

>>>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-04-18 Thread Niels Erik Kristensen 
Yes thats right :-)-tests have been made-After one year outside in sun and 
rain, an objeckt made of pla will get pale, but nothing are seen on the 
plastic. 
The most common form of bioplastic is polylactide acid or PLA and is made 
out of corn. Unfortunately, in order for PLA do biodegrade, it needs a 
certain kind of bacteria at just the right temperature. These are not found 
in landfills, (where most plastic bags end up), but require treatment at 
one of 42 commercial composting facilities in the U.S.

So i will not take my Centurion near one of the 42 composting 
facilities-But just stay in Denmark-And my tank will be safe :-)


Den mandag den 18. april 2016 kl. 20.50.18 UTC+2 skrev TyngTech:
>
> PLA?  That's biodegradable so don't let it get wet for any length of time. 
>  Awesome work btw.
>
> ST
>
>
> On Thursday, April 14, 2016 at 2:38:11 PM UTC-4, Niels Erik Kristensen 
> wrote:
>>
>> Iam using thise motors: 
>> http://www.hobbyking.com/hobbyking/store/__8490__Turnigy_4258_Brushless_Motor_800kv.html
>> I print everything in PLA. And the thing around my motors are a cooling 
>> tube, with 2*45mm fan units in the top-Its home made like everything om my 
>> tank, i also made all drawings. I dont no yet if there are ant wear on my 
>> gears-But i can se wear marks on the tracks 
>>
>> Den torsdag den 14. april 2016 kl. 18.36.26 UTC+2 skrev Jean-Maxime Cyr 
>> St-Pierre:
>>>
>>> Super job!! Look anwsome!!
>>>
>>> I got few questions...!
>>>
>>> What size your airplane motors are ??
>>>
>>> What material your using for your gears?? I know there is new wires to 
>>> make super strong gearing out of nylon...
>>>
>>> What is the thing you made up for not overheating your motor?
>>>
>>> And after all this did you see any sign of wear on any of your part?? 
>>> Because your project seem to proof that the futur of our hobby pass by the 
>>> 3d printing like almost in any hobby it seems...!!
>>>
>>> Thank you
>>>
>>> Jean-Maxime Cyr St-Pierre 
>>>
>>>
>>> --
>>> *De :* rctank...@googlegroups.com  de la 
>>> part de Niels Erik Kristensen 
>>> *Envoyé :* 12 avril 2016 17:09
>>> *À :* R/C Tank Combat
>>> *Objet :* [TANKS] Re: Centurion mrk 5 
>>>  
>>> Final stres test before i continue the build-All test OK  
>>> https://www.youtube.com/watch?v=3qGgA0uKl-o
>>>
>>> Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik 
>>> Kristensen: 

 Hey. iam making a Centurion mrk 5 Danish version. 
 All moving parts made with my 3D printer. Brushless motors and lipo 
 battery .
 First track test today:
 https://www.youtube.com/watch?v=iXr4a3K6Jd8 
 
 Centurion 1/6 Track test 
 www.youtube.com
 Første test af motor + gear+ bælte på min hjemme byggede centurion i 
 størelse 1-6. Alle dele er printet i PLA på min 3D printer ( Undtaget 
 selve 
 karosseriet )

 -- 
>>> -- 
>>> You are currently subscribed to the "R/C Tank Combat" group.
>>> To post a message, send email to rctank...@googlegroups.com
>>> To unsubscribe, send email to rctankcombat...@googlegroups.com
>>> Visit the group at http://groups.google.com/group/rctankcombat
>>>
>>> --- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "R/C Tank Combat" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to rctankcombat...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-04-18 Thread TyngTech 
PLA?  That's biodegradable so don't let it get wet for any length of time. 
 Awesome work btw.

ST


On Thursday, April 14, 2016 at 2:38:11 PM UTC-4, Niels Erik Kristensen 
wrote:
>
> Iam using thise motors: 
> http://www.hobbyking.com/hobbyking/store/__8490__Turnigy_4258_Brushless_Motor_800kv.html
> I print everything in PLA. And the thing around my motors are a cooling 
> tube, with 2*45mm fan units in the top-Its home made like everything om my 
> tank, i also made all drawings. I dont no yet if there are ant wear on my 
> gears-But i can se wear marks on the tracks 
>
> Den torsdag den 14. april 2016 kl. 18.36.26 UTC+2 skrev Jean-Maxime Cyr 
> St-Pierre:
>>
>> Super job!! Look anwsome!!
>>
>> I got few questions...!
>>
>> What size your airplane motors are ??
>>
>> What material your using for your gears?? I know there is new wires to 
>> make super strong gearing out of nylon...
>>
>> What is the thing you made up for not overheating your motor?
>>
>> And after all this did you see any sign of wear on any of your part?? 
>> Because your project seem to proof that the futur of our hobby pass by the 
>> 3d printing like almost in any hobby it seems...!!
>>
>> Thank you
>>
>> Jean-Maxime Cyr St-Pierre 
>>
>>
>> --
>> *De :* rctank...@googlegroups.com  de la 
>> part de Niels Erik Kristensen 
>> *Envoyé :* 12 avril 2016 17:09
>> *À :* R/C Tank Combat
>> *Objet :* [TANKS] Re: Centurion mrk 5 
>>  
>> Final stres test before i continue the build-All test OK  
>> https://www.youtube.com/watch?v=3qGgA0uKl-o
>>
>> Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik 
>> Kristensen: 
>>>
>>> Hey. iam making a Centurion mrk 5 Danish version. 
>>> All moving parts made with my 3D printer. Brushless motors and lipo 
>>> battery .
>>> First track test today:
>>> https://www.youtube.com/watch?v=iXr4a3K6Jd8 
>>> 
>>> Centurion 1/6 Track test 
>>> www.youtube.com
>>> Første test af motor + gear+ bælte på min hjemme byggede centurion i 
>>> størelse 1-6. Alle dele er printet i PLA på min 3D printer ( Undtaget selve 
>>> karosseriet )
>>>
>>> -- 
>> -- 
>> You are currently subscribed to the "R/C Tank Combat" group.
>> To post a message, send email to rctank...@googlegroups.com
>> To unsubscribe, send email to rctankcombat...@googlegroups.com
>> Visit the group at http://groups.google.com/group/rctankcombat
>>
>> --- 
>> You received this message because you are subscribed to the Google Groups 
>> "R/C Tank Combat" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to rctankcombat...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-04-14 Thread Niels Erik Kristensen 
Iam using thise 
motors: 
http://www.hobbyking.com/hobbyking/store/__8490__Turnigy_4258_Brushless_Motor_800kv.html
I print everything in PLA. And the thing around my motors are a cooling 
tube, with 2*45mm fan units in the top-Its home made like everything om my 
tank, i also made all drawings. I dont no yet if there are ant wear on my 
gears-But i can se wear marks on the tracks 

Den torsdag den 14. april 2016 kl. 18.36.26 UTC+2 skrev Jean-Maxime Cyr 
St-Pierre:
>
> Super job!! Look anwsome!!
>
> I got few questions...!
>
> What size your airplane motors are ??
>
> What material your using for your gears?? I know there is new wires to 
> make super strong gearing out of nylon...
>
> What is the thing you made up for not overheating your motor?
>
> And after all this did you see any sign of wear on any of your part?? 
> Because your project seem to proof that the futur of our hobby pass by the 
> 3d printing like almost in any hobby it seems...!!
>
> Thank you
>
> Jean-Maxime Cyr St-Pierre 
>
>
> --
> *De :* rctank...@googlegroups.com  <
> rctank...@googlegroups.com > de la part de Niels Erik 
> Kristensen 
> *Envoyé :* 12 avril 2016 17:09
> *À :* R/C Tank Combat
> *Objet :* [TANKS] Re: Centurion mrk 5 
>  
> Final stres test before i continue the build-All test OK  
> https://www.youtube.com/watch?v=3qGgA0uKl-o
>
> Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik 
> Kristensen: 
>>
>> Hey. iam making a Centurion mrk 5 Danish version. 
>> All moving parts made with my 3D printer. Brushless motors and lipo 
>> battery .
>> First track test today:
>> https://www.youtube.com/watch?v=iXr4a3K6Jd8 
>> 
>> Centurion 1/6 Track test 
>> www.youtube.com
>> Første test af motor + gear+ bælte på min hjemme byggede centurion i 
>> størelse 1-6. Alle dele er printet i PLA på min 3D printer ( Undtaget selve 
>> karosseriet )
>>
>> -- 
> -- 
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctank...@googlegroups.com 
> To unsubscribe, send email to rctankcombat...@googlegroups.com 
> 
> Visit the group at http://groups.google.com/group/rctankcombat
>
> --- 
> You received this message because you are subscribed to the Google Groups 
> "R/C Tank Combat" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to rctankcombat...@googlegroups.com .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

RE: [TANKS] Re: Centurion mrk 5

2016-04-14 Thread Jean-Maxime Cyr St-Pierre 
Super job!! Look anwsome!!

I got few questions...!

What size your airplane motors are ??

What material your using for your gears?? I know there is new wires to make 
super strong gearing out of nylon...

What is the thing you made up for not overheating your motor?

And after all this did you see any sign of wear on any of your part?? Because 
your project seem to proof that the futur of our hobby pass by the 3d printing 
like almost in any hobby it seems...!!

Thank you

Jean-Maxime Cyr St-Pierre



De : rctankcombat@googlegroups.com  de la part 
de Niels Erik Kristensen 
Envoyé : 12 avril 2016 17:09
À : R/C Tank Combat
Objet : [TANKS] Re: Centurion mrk 5

Final stres test before i continue the build-All test OK
https://www.youtube.com/watch?v=3qGgA0uKl-o

Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik Kristensen:
Hey. iam making a Centurion mrk 5 Danish version.
All moving parts made with my 3D printer. Brushless motors and lipo battery .
First track test today:
https://www.youtube.com/watch?v=iXr4a3K6Jd8
[https://www.bing.com/th?id=OVP.V2e4f334d7e963d929254e0ac232fa993=Api]

Centurion 1/6 Track test
www.youtube.com
Første test af motor + gear+ bælte på min hjemme byggede centurion i størelse 
1-6. Alle dele er printet i PLA på min 3D printer ( Undtaget selve karosseriet )



--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

---
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [TANKS] Re: Centurion mrk 5

2016-04-10 Thread Frank Pittelli 
Nice work. Glad to see someone is using a 3D printer to build things 
that actually work :-)


--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.