Re: [RE-wrenches] Plaques

After years of having a local vendor do my engraving and using a couple of different thermal printers, I settled on a Brady BMP 51 label printer. All kinds of colors and UV protective labels. The machine remembers your labels in a file and has battery backup. Definitely best to keep the labels out

Re: [RE-wrenches] In search of better generator start relay for Outback system

G'day Dan, I've been using the Dorman 5 pin, 30A 12v relay, p/n 88069 for several years. I've found them at Auto Zone or sometimes I just buy them online. Good Luck, Christopher On Fri, Feb 9, 2024 at 12:28 PM Dan Fink via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Esteemed

Re: [RE-wrenches] Lithium batteries

Ray, Oddly enough we're getting ready to replace our 22 year old 48v bank of Rolls Surrette batteries at our offgrid Design and Training Center in Western NY with a set of Lithium batteries.The reason for the jump to Lithium is because of the numerous request by clients for them over the past 5

Re: [RE-wrenches] State of Charge Meter for Sol-Ark

Why not revert to the tried, trued and tested Trimetric 2030 from Bogart engineering? I miss the old 2020 units that we installed on every off grid system back in the day. Christopher On Sun, Feb 4, 2024 at 11:38 AM Glenn Burt via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Cheap

Re: [RE-wrenches] Cable sizing for high current modules? NEC interpretation/guidance?

I'd be curious to know of the connector failures y'all have experienced, were the majority of these roof mounts? Just wondering if with better air flow like that of a pole/ground mount, if that helped to minimize connector failure. Christopher On Fri, Nov 10, 2023 at 1:21 AM Bill Battagin via

[RE-wrenches] Schneider BTS

G'day All, Having a difficult time locating a distributor for Schneider BTS cables for a twin set of XW Pro 6848's. Schneider will not sell these to installers. Please provide me with a source/supplier. Much Appreciated, Christopher- Chris Schaefer’s *Tel 585-229-2083 or Cell 585-748-1870 *

Re: [RE-wrenches] Propane range options for off-grid?

When it comes to stove/ovens, been using and recommending Roper by Whirlpool for almost 20 years without issues for our offgrid clientele as well as our own offgrid home and shop/office. Zero electric required. Your Friendly Neighborhood Solar Guy, Christopher On Tue, Sep 26, 2023 at 7:33 PM

Re: [RE-wrenches] Flashing Identification

Oh my. Well at least there are palm trees in the background, lol. Christopher On Mon, Aug 7, 2023 at 5:36 PM Jason Szumlanski via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Obviously, this is wrong on so many levels, but can someone identify the > flashings in the attached

Re: [RE-wrenches] Phased out Schneider Electric SCP

akin to outback and their FM100 charger controller with no display. I use the Midnite classic 200 instead. Christopher On Tue, Apr 4, 2023 at 11:34 AM Dave Angelini Offgrid Solar via RE-wrenches wrote: > Thanks Glen ! I will ask him on Thursday at a webinar. > > > Register here: > >

Re: [RE-wrenches] Fortress Battery Heater

Ray, I'd suggest reaching out to the Fortress techie's as they just introduced a heater product for their enclosure products. While I don't believe they have a unit specif to the eVault but you should be able to make it work. Christopher On Wed, Feb 8, 2023 at 6:43 PM Jerry Shafer via

Re: [RE-wrenches] Discover AES Wall Mount Considerations

Michael, Any pictures of that bracing system pre battery mount would be greatly appreciated. Christopher On Tue, Sep 6, 2022 at 3:21 PM Michael Morningstar via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > We hang a lot of AES on wooden stud walls. Our engineer prescribed the >

Re: [RE-wrenches] wire management on Qcell AC module

G'day All I rarely do roofs but I can tell you with my pole, ground or DAT projects it's nearly impossible to cover the modules with a screening product for safety reasons. I refuse to use the mid panel j-box modules. I'm not one for boycotts but just use the old school modules with the j-box

Re: [RE-wrenches] Discover AES Battery Rack Options

Hey Michael, Any chance you might share a couple of pictures of the project you discussed? Christopher On Sun, Mar 27, 2022 at 11:44 AM Michael Morningstar via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > We almost always use the AES brackets. Often mounted to strut. You want >

Re: [RE-wrenches] Mate3s hangups

Currently experiencing the exact same issue with a new unit installed in November of 2021. The internet connection is via Hughes Net. The bad thing is it is up in snow country so once the dish gets full snow your done till it is removed or melts. Once the internet returns the client also has

Re: [RE-wrenches] ] Tesla Anywhere

Gotta say the same thing here in NY. I've applied and sent credentials 3x now with little to no response over the last 2 years. The local Tesla car dealer wants us onboard as they are getting a lot of complaints from their car clients when it comes to their charger installation's crew. I'm told

Re: [RE-wrenches] BP HI / Namaka with Sol-ark inverters

Correct me if I'm wrong but my research seems to lean towards the prefered method to implement Lithium batteries with an inverter system is via closed loop communication, over open loop? Currently looking into installing a BI and Fortress system of similar size side by side here at our Design and

Re: [RE-wrenches] 2v agm batteries

Hey Jay, Been testing a set of FireFly 2v 900 Ah that are outdoors here in Western NY. Two years on them thus far with favorable results. Christopher On Fri, Nov 19, 2021 at 12:14 PM William Miller wrote: > Jay: > > The Fullriver 1150-2 have worked pretty well for me: > >

[RE-wrenches] issue on master/slave XW Pro 6848

G'day All, Apparently a new client that I picked up on an abandoned system attempted to EQ his batteries and he believes he accidentally put the master inverter into standby. This of course shut down his power to his home. The slave produced an F66 fault which is explained on page 39 of the

Re: [RE-wrenches] schneider xw-Pro issue with genny running

interaction of the > generator with the xw that is causing the problem. > > Howie Michaelson > Sun Catcher > NABCEP Certified Solar PV Installer™ > Solar Electric & Heat Pumps Systems Sales & Service > 802-272-0004 > > On Mon, Jun 28, 2021, 4:48 PM Chris Schaefer >

Re: [RE-wrenches] schneider xw-Pro issue with genny running

MillerSolar/case_studies/25_GFI%20Tripping/GFI_Tripping.html> >> to a write-up I did. >> >> >> >> Hope this helps. >> >> >> >> William Miller >> >> >> >> Miller Solar >> >> 17395 Oak Road, Atascadero, CA 93

[RE-wrenches] schneider xw-Pro issue with genny running

G'day All, I recently got pulled into someone else's mess on a twin xw-pro 6848 with a Generac 20kw air cooled genny. A little back story. The client is currently off grid with basically an all electric house. I know, I know, lol. The intent is to bring the grid in but that has been slowed for

Re: [RE-wrenches] Wago Connectors (221 series)

Kudos to Dan Fink. Nice job. Just another reason to send a donation to Michael Welch. Christopher On Mon, May 10, 2021 at 3:29 PM Jason Szumlanski < ja...@floridasolardesigngroup.com> wrote: > I agree and I just got written confirmation from Wago that said (regarding > the 221-4XX series): > >

Re: [RE-wrenches] Generator and AC coupling on a Sol-Ark

Jason, A valid concern which is why I always wire them as powered open so if there is a failure it would transition closed or not open. Christopher On Tue, May 4, 2021 at 4:15 PM Jason Szumlanski < ja...@floridasolardesigngroup.com> wrote: > What happens when the contactor fails? I don't trust

Re: [RE-wrenches] Generator and AC coupling on a Sol-Ark

Dave, My initial background comes from the Industrial Controls world w/ a strong military influence. Given that the generator probably has some kind of transfer switch, chances are that the transfer switch has a dry contact in which can be used to power a relay. I normally use ASCO transfer

Re: [RE-wrenches] seeking 3ph battery based/backed inverters and experiences

y wrote: > > Hi Christopher > > I'm not sure what power your looking for. > > Try > > https://www.princetonelec.com/dela-inverter > > There are others too > > None of the normal ( OB, Schneider etc) will do 208-480. Only 120-208 > > Jay > > On Apr 2

[RE-wrenches] seeking 3ph battery based/backed inverters and experiences

G'day All, I'm not familiar with any 3 ph 208 to 480vac battery backup inverter manufacturers. So if you could point me in the right direction on who you know and better yet who you've had experience with, good, bad or otherwise, that would be extremely helpful. Happy 420 to all my fellow Solar

[RE-wrenches] guyed tilt up tower suggestions

G'day All, We don't seem to see much on wind these days on the wrenches, so now is the time to blow out some of the cobwebs. Anyway, I'm getting dragged kicking and screaming into a Missouri Raptor 7 blade Freedom 1.6kw offgrid wind project and in search of a tilt up tower. Back in the day it

[RE-wrenches] Growatt 5k inverter w/ transformer, more China junk?

G'Day and Happy New Year's All, Just wanted to share this with you all. A potential client purchased a somewhat complete system off the internet and is now seeking an installer. I know, same old story. The package came with two Growatt SPF-5000 ES inverters with two Huawei HW-TX-5000

Re: [RE-wrenches] DPW rack adjustment

I'd suggest reaching out to Travis at MT Solar as he has made custom manual adjusters for my old installed DPW pole mounts. No bolts to remove and easy for anyone to adjust the angle without the need of a ladder. Christopher On Thu, Oct 15, 2020 at 10:25 AM Jay wrote: > Hi Jeremy, > > I’ve not

Re: [RE-wrenches] GTBB inverters without batteries

Jeff, I'd suggest Sol-Ark, either the 8 or 12kw unit. Christopher On Mon, Oct 5, 2020 at 11:29 AM Ray wrote: > All of the GTBB inverters I've ever used needed the battery to even > function. > > Ray Walters > Remote Solar > 303 505-8760 > > On 10/5/20 9:20 AM, Jeff Clearwater wrote: > > Hey

Re: [RE-wrenches] Pika Support by chance?

Jeremy, Pika was bought out by Generac and rebranded as their PWR cell. Most of the old crew from Pika are now working for Generac. It's beyond me that Generac bought them and yet they still don't have a generator input. That's why I could never sign on to the Pika product line. Good luck.

Re: [RE-wrenches] Microgrid... Outback or SMA or other?

I'd suggest giving the crew at Sol-Ark a quick call @ 972-575-8875 with their 12kw unit. Not sure what their max number of inverters are. Christopher On Tue, Sep 8, 2020 at 1:14 PM Kienan Maxfield wrote: > Hey all, I'm designing a microgrid sized off-grid system for somebody, and > I'm just

Re: [RE-wrenches] Puzzle: Dryer does not work during FXR battery charging

My bet is these clients are on a budget given the battery voltage and small inverters. So there probably isn't any PV at the moment. I've been coming across a lot of these types of systems lately. Came across a Generac 120v, 6kw Eco Gen with 3,500 hours on it! Ouch and the clients just won't add

Re: [RE-wrenches] 200A Automatic Transfer switch

I've been using the ASCO series 185 and you can get it either as "service entrance" rated or not. Not sure on the nema 3r rating. But I know they make custom units also. Christopher On Wed, Aug 12, 2020 at 9:07 AM August Goers wrote: > Kirpal - > > It's been a few years, but we've used Briggs

Re: [RE-wrenches] Wind Turbine

RUN from the room when it comes to the Kohilo! This ole boy is in my backyard and I'm currently trying to clean up one of their projects. They kinda went the way of Wind Tamer, whereas they had to add solar to meet their output claims. Christopher On Wed, Jul 8, 2020 at 9:06 AM wrote: >

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

e slave is port 7. I believe port 7 is called the sub-master in this > config. With only 2 inverters it functions as the slave to the master in > port 1. This config has always worked for me. > > > > Hope this is accurate info. > > On 6/25/2020 1:35:55 PM, Chris Schaefer

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

ris > Did you skip over and plug in to port 3 with the slave, swap the cord, > Jerry > > On Thu, Jun 25, 2020, 12:54 PM Chris Schaefer > wrote: > >> The system is critical to a farm watering operation so I wasn't able to >> shut it down to try and swap the port 1

Re: [RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

y and secondary? Run with secondary > alone as primary? > > > > William Miller > > > > *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On > Behalf Of *Chris Schaefer > *Sent:* Thursday, June 25, 2020 10:35 AM > *To:* RE-wrenches > *Subject:* [

[RE-wrenches] Slave Radian not showing up on Hub10 or @ Mate3s

G'Day All, So I started up a system recently with two Radian 8048A's. The master is connected to port 1 and the slave connected to port 2 with the FlexNet at port 3. There are no OB charge controllers in the system. When the hub is polling (led's scrolling) nothing shows up for the slave at port

Re: [RE-wrenches] Magnum Frequency Shift

G'Day Mark, Which grid tied inverter are you attempting to AC couple with. I apologize if you already called it out in the thread. Christopher On Fri, Jun 12, 2020 at 2:01 PM Jay wrote: > Hi Mark, > > Agreed that diversion is the way to go. > As 4v above absorb volts is completely unworkable.

[RE-wrenches] the history of three Mate's

G'Day All, Recently ran into an issue on a system installed by others. It's an Outback FW1000 circa 2015 with a twin stack of VFX3648's. The system is offgrid and charged solely by a 15kw propane fired generator with plenty of hours on it. I'll be adding PV to it in the coming weeks. The system

[RE-wrenches] advice on cellular modem brands

G'Day All, I'm in search of advice on the different brand/models of cellular modems ya'll have been having good luck with these days when it comes to monitoring something basic like an OutBack Mate3s via Optics RE. What I've found thus far is from a company called MoFi Networks. They offer a

Re: [RE-wrenches] Optics systems ghost reprogramming

To all, Lately it seems that I'm taking over more and more off grid projects that have become orphaned by the many possers in our off grid world. Believe me when I say I'm happy to do it. In regards to Optics I've created my own account so that I can view all my clients. The problem I'm running

[RE-wrenches] combining 24v and 12v systems

G'day and Happy New Year to All, Recently came across this offgrid OB FX system. The first part is a 12v battery system w/ 2 PV modules, 2 Trojan L16 batteries used to power a frig and freezer about 6 years old. The second is a 24v with 3kw of PV, 4 Trojan L16's, twin OB FX inverters installed

Re: [RE-wrenches] Enphase

Hi Jay, Ran into the exact situation last install season with Enphase. After a lot of back and forth emails with pictures basically showing them I wasn't losing it, they finally deduced that they were packaging them wrong. So the package part number is correct but the adaptor inside the package

[RE-wrenches] Fluke 87 replacement

G'Day All, Well my 24 year old Fluke 87 finally passed. It was a great unit and fit all my needs. Before I go out and buy another I thought I'd reach out to see if any of my peers would suggest anything different or possibly a step above in the Fluke family or another brand? Thanks, Christopher-

[RE-wrenches] seeking PV mounting advice to Shipping Container for Off-grid

G'Day All, I'm looking for anyone with advice that has mounted PV to a shipping container roof with minimal to no roof penetrations. The container will not be required to be transported with PV attached, only the racking and only one time to project site. They will not be mounted flat but prefer

Re: [RE-wrenches] Strategies for staged startup of appliances

Hey Dave, Sorry for the delay to your question on the ASCO. Yes the 185 is the one I use either with a service entrance rated CB or without. You can adjust time so in a power outage the transfer is less than 2 seconds. Have had zero issues since switching to them over 10 years ago. Christopher

Re: [RE-wrenches] Strategies for staged startup of appliances

Jason, Given all of the equipment you're looking at I'd consider using a small shoe box sized PLC. Relays and timers are good but the PLC will give you a lot more flexibility in a very small package and will be able to sense when the ATS switch transfers. I enjoy using the ASCO unit as it offers

Re: [RE-wrenches] Ground Mount with cable anchors

Glen, I just completed a three aray project. Call me @ 585-748-1870 and I'll tell you all about it. Christopher Schaefer On Mon, Sep 9, 2019 at 3:31 PM Jerry Shafer wrote: > Wrenches/Glen > I know nuance, they must be trailered or crained into position, leveled on > site and cables are driven

Re: [RE-wrenches] SMA phantom arc faults

Got called in by another peer to debug that infamous SMA error 8206 on a 2 year old 5kw unit. The array is roof mounted on composite shingles with 14 SunPower 345w modules. First time ever seeing this error on this project. I'd love to hear from others as to what they've found or better yet hear

Re: [RE-wrenches] 100ms for Locked Rotor Amps?

Given the DC voltage sag I have to wonder how a bank of lithium batteries would react as if I understand correctly they maintain the same voltage through out their entire range of SOC. Christopher On Fri, Jul 26, 2019 at 1:19 PM Ray wrote: > I've run a 3 Hp pump on a pair of VFX 3648s, but

Re: [RE-wrenches] Soft Start Modules for Well and Sewage Pumps?

I've been following this post with great interest. I was looking at an off-grid project a couple years back that was being run entirely by large diesel generators and had two massive AC units where the LRA was 104 Amps. I found a company that makes what amounts to a soft start. I don't recall the

Re: [RE-wrenches] Solar contractor insurance cancellation

Try Erie Christopher On Sat, May 11, 2019 at 8:05 AM Christopher Warfel < cwar...@entech-engineering.com> wrote: > That happened to me too. All solar policies were cancelled. Brown and > Brown of NJ advertises through NABCEP and I found them to be a good company > to work with. Chris > On

Re: [RE-wrenches] Blue Planet Batteries

Howie, Everyone's favorite HP editor Joe Schwartz is now working for Blue Planet. He did an article in HP on transitioning his own off-grid system to Blue Planet. I believe you can find the article on the Blue Planet website. Christopher On Thu, Apr 4, 2019 at 10:09 AM Howie Michaelson wrote:

[RE-wrenches] Big AGM's and 24V Lithium batteries

G'Day All, Came across an older DIY 24v off-grid system. Looking to replace current AGM SunXtender batteries with less then 4 years on them but severely abused. Client won't go for my normal Rolls/Surrette because they are very sensitive to smells. Thus I was considering LiFePo4 batteries

Re: [RE-wrenches] Equipment ideas for very large residential PV and battery backup

roducts and get their products UL listed. > Good tech support and well thought out products. > asantosb...@victronenergy.com Alan is formerly from Magnum but moved to a > better quality product. T > > On Jan 10, 2019, at 11:24 AM, Chris Schaefer > wrote: > > Just finished consult

Re: [RE-wrenches] Equipment ideas for very large residential PV and battery backup

Just finished consulting on a large island project in North America where the client purchased the Victron system prior to my involvement. Sadly Victron has yet to receive UL approval for use in our neck of the world. So beware. Christopher On Wed, Jan 9, 2019 at 4:50 PM Tump wrote: > Check

Re: [RE-wrenches] Low voltage DC v. higher voltage DC

Hey Michael from SMA, any chance we can finally get an 240vac SI here in the states? Christopher On Tue, Sep 18, 2018 at 12:11 PM, Harry Mahon wrote: > Marco – > > > > I will need to ask for information about the BYD availability. Once those > units have all required listings/certifications

Re: [RE-wrenches] Trackers

Idaho PV # 028374 > > NABCEP # 051112-136 www.solarwork.biz > > *"Responsible Technologies for Responsible People since 1988" * > > *P* Please consider the environment before printing this email. > > > > > > *From:* RE-wrenches *

Re: [RE-wrenches] Trackers

To All, Seen it first hand with existing Northeast offgrid clients that had old pole mounts with lots of generator usage during the winter months. Added a single 12 module DAT and generator usage was down to as little as twice in the entire winter. Others usage was down to just a handful of times

Re: [RE-wrenches] battery temp sensors for older Trace/Xantrex inverters

. > > The Outback Battery temp sensor has a 10 K negative coefficient. > > The Outback temp senor will not work with Trace equipment. > > > > > > > > *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On > Behalf Of *Chris Schaefer > *Sent:

Re: [RE-wrenches] battery temp sensors for older Trace/Xantrex inverters

Ray & All, It is for an off-grid system with batteries in the basement along with an auto start generator where the clients are only there during the summer months. During winter months they keep the house at 45 degrees to avoid freezing pipes up here in Northern NY. Solar is severely undersized.

Re: [RE-wrenches] battery temp sensors for older Trace/Xantrex inverters

; attachment is other than the terminal and again, the connector is specific >> to each manufacturer. >> >> Thanks for your input, >> >> Bill Loesch >> Solar 1 >> Saint Louis, MO >> 314 631 1094 >> >> >> >> --

[RE-wrenches] battery temp sensors for older Trace/Xantrex inverters

Good Day All, Running into a lot of missing or chewed up battery temp sensors for the older Trace inverters. I'm looking for potential replacements. Anyone had any luck using another vendor or do you have a direct replacement source for these? Thanks, Christopher- Chris Schaefer’s *Tel/Fax

Re: [RE-wrenches] 5 battery strings

What source are you all using for buss bars for these multiple battery string set ups? Christopher On Mon, Jul 23, 2018 at 2:16 PM, wrote: > Separate out the individual series strings and run each string to a buss > bar setup. Remember it isn't just resistance differences between batteries >

Re: [RE-wrenches] 5 battery strings

And it's not a bad idea to add a shunt in each string for trouble shooting down the road. Christopher On Mon, Jul 23, 2018 at 11:24 AM, Steve Higgins wrote: > I would at least rewire them like this... > > [image: image.png] > Remember all the parallel strings take offs must be the same

Re: [RE-wrenches] crumbling ballast blocks

Kirk, Had the same thing happen to me on a commercial ballasted system installed back in 2004. Had to be moved around to allow installation of a new roof system. Replaced all the ballast in 2017. I'm located in Western NY, thus the same weather you see. The blocks were on a stainless steel pan of

Re: [RE-wrenches] Enphase tech support

Roy, Nick Soleil is on the wrenches list and is employed by Enphase. Christopher Schaefer On Wed, Jun 13, 2018 at 2:58 PM, MDElectricSolar wrote: > 707-763-4784 > > On Wed, Jun 13, 2018 at 10:29 AM Roy Butler > wrote: > >> Does anyone have contact information for Enphase Tech Support? >> >>

Re: [RE-wrenches] Chevy Bolt

I have successfully charged a Chevy Volt with a Radian 8048 set up in an off-grid system. The client has since sold the volt. It was terrible in the snow of our Western NY winters, LOL! Christopher Schaefer Chris Schaefer’s *Tel/Fax 585-229-2083 or Cell

Re: [RE-wrenches] Solar Pond Aerators

I've worked with Keeton Industries, Inc. out of Fort Collins CO in the past. Try 970-493-4831. Its been a few years though. Christopher Schaefer On Tue, Apr 3, 2018 at 12:11 PM, Dana wrote: > An internet search of “solar pond aeration” turned up a variety of options. > > I

Re: [RE-wrenches] Auger for ground mount

While I've been using the Zilla platform with an auger attachment for a mini excavator with good luck. With that said I'm looking at Nuance Energy and their Osprey mount which requires a hammer drill. Anyone tried this yet? Christopher On Fri, Feb 9, 2018 at 11:35 AM, Jerry Shafer

Re: [RE-wrenches] automatic transfer switch

Hi Jay, I've been using the ASCO Series 185 for years with the Radian, single or dual. With some fine tuning I've gotten the transfer time down to around 1 second. The have a manual switch built inside of it. They also offer a service rated (with CB) or not. Zero failures to date. Christopher

Re: [RE-wrenches] Array Mock-up Software

While to expensive for my small biz I might suggest Pictometry. They use to offer a free trial. Great detail. Christopher Chris Schaefer’s *Tel/Fax 585-229-2083 or Cell 585-748-1870 * *5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com

Re: [RE-wrenches] Unique Off Grid Ranges

Not sure if I'm missing something here but we've been using a Roper since 2005. No plug, no batteries. Still works great. Let me know if you want to know the model. Christopher Chris Schaefer’s *Tel/Fax 585-229-2083 or Cell 585-748-1870 * *5115 South Hill Road ~

Re: [RE-wrenches] Wanted: AC centrifugal pump with soft start

Mick, While this isn't a pump you may find a use for this item. The owner of the company is real easy to talk to and understands our industry well. http://www.gen-pro.biz/ Christopher On Fri, Aug 11, 2017 at 4:32 PM, Jay wrote: > Hi Ray > > I believe it's been replaced

Re: [RE-wrenches] No more Enphase

Chris, Took me a while to jump but this season we went to AP systems. About 33% less $ plus its two modules per inverter, thus cuts down the install labor and time. The only issue is a base 10 year warranty. Can pay for 20. I'm hoping enough of us installers complain and they'll bump it up to 25

Re: [RE-wrenches] Enphase installer compensation M-190's discontinued

I dumped Enphase this season for APS. Simply put, half the equipment with almost half the time to install. and a much lower cost point. If anyone is at InterSolar I suggest lighting up the Enphase reps about the M190 issue. Make some noise. Then step over to the APS booth. Christopher Chris

Re: [RE-wrenches] Morningstar Sure Sine On/Off switch

Hey Wayne, Any of the electrical industrial suppliers for controls will offer a push button with multiply options for contacts. Then you've got momentary or maintained contacts. So many options. Automation Direct, Idec, Omron, Allen-Bradly and Square D to name a few. Christopher On Mon, Mar 6,

Re: [RE-wrenches] Fire rated (FR) gear toxicity?

After 8 years as aircrew in the Marine Corps, we wore FR flight suits daily. While there are those that might say I'm a little off :) no medical issues nor I'm I on any meds. Only time will tell. Christopher Schaefer On Sun, Feb 5, 2017 at 10:32 AM, Dana wrote: > My first

Re: [RE-wrenches] MT Solar / Iron Ridge Issue

Here at Solar & Wind FX 95% of our installs are poles or DAT's. We changed over to MT I believe 3 seasons ago. I've got several of their 16 and 15 module racks out there. I did have a 15 module rack rotate on me this past fall. It was a two pole system but only one rotated about 10 degrees. No

Re: [RE-wrenches] Mate 3 lock-up

John, What kind of environment are the batteries in? Given that we have been experiencing some extreme cold as you know will kill a battery quickly. Christopher On Mon, Dec 19, 2016 at 9:49 AM, John Blittersdorf < john.blittersd...@gmail.com> wrote: > Jay, > Glad to know you have had good

Re: [RE-wrenches] Firmware, Firmware, Firmaware was Outback Programming Ghost

Lones, Ok, so my question is if we save the original user settings to one SD card and then format a separate SD card with the new firmware and install. Once the new firmware is installed can we put the original SD card in and upload all of our user settings. Or do we have to manually input all the

Re: [RE-wrenches] Vertical wall, shared rails

Hey Benn, Just curious as to who's rail you're using that is rated for such a steep angle? Christopher On Mon, Oct 17, 2016 at 10:16 PM, Dana Solar work wrote: > I have taken adjustable > ground mount racks & flipped them upside down. They work great as long as > you got

Re: [RE-wrenches] Rolls Surrette Re-combiner caps.

Kirpal, You state that the Rolls 5000 series come standard with recombiner caps. Just installed a set of 4ks25p yesterday and the caps haven't changed that I noticed. I've been using the Hydro caps for about 15 years now and all my clients including the ones we use here at our office/shop only

Re: [RE-wrenches] Buck-Boost transformer to mitigate high voltage drop?

Perhaps I missed it but you didn't say what you measured the voltage to be at the clients service entrance panel at his house? Christopher On Tue, Aug 16, 2016 at 1:40 PM, Mac Lewis wrote: > Yes, what current did you use to calculate that voltage drop? How big is > the PV

Re: [RE-wrenches] Whisper 100 parts?

FYI Luminous has sold to another India firm call Wish. wishenergy.com Be fore warned communications is tough. Best of luck. Christopher Chris Schaefer’s *Tel/Fax 585-229-2083 or Cell 585-748-1870 * *5115 South Hill Road ~ Canandaigua New York

Re: [RE-wrenches] Enphase Support Non-Responsive

Hey Jason, I agree totally. What works for me here on the East (Right) Coast is I call just prior to 2000 EST and I am almost assured of being able to talk with out a long wait time. Most times I get straight through. Christopher On Tue, Jul 5, 2016 at 3:46 PM, Jason Szumlanski <

Re: [RE-wrenches] grundfos SQFlex

I'd suggest a valve restrictor or perhaps a ball valve that you can adjust over time till you achieve your correct flow rate while making sure your well is able to recover. Christopher On Thu, Jun 30, 2016 at 8:43 PM, jay wrote: > Hi All, > > Any trick methods to keep a

Re: [RE-wrenches] Radian GSLC

BTW, the ROCB also uses both of your AUX relay options. Got called in to evaluate a 6 Radian AC Coupled configuration with no charger controllers and 6 Fronuis. What a cluster *%#%(^. The project was a very bad design from the beginning. That's what happens when you ask a grid tied installer to

Re: [RE-wrenches] Mobile solar trailer

Hey Jason, Sorry to hear that. Any chance you can share a couple of pix so we can build it ourselves? What were the trailer dimensions? Thanks, Christopher On Mon, May 9, 2016 at 5:34 PM, Lones Tuss wrote: > Hello sir > > You might also want to look into > >

Re: [RE-wrenches] Helical Anchors for Ground-Mount

to make sure that your term of anchors is the same as for screws. What we call helical ground anchors has a very different shape and wouldn't use them for solar. Chris On 3/31/2016 2:38 PM, Chris Schaefer wrote: Eric, I've been researching this for almost two years now and finally decided

Re: [RE-wrenches] "Solar-Pack 100"

Nicely done. A little more detail on the black bar of which the module mounts to. So more photos (perhaps side view with & w/o module) of it and what it is made of? Christopher -Original Message- From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Phil

Re: [RE-wrenches] Aquion Batteries, Was LiFePO4

To All, Great insight on the lithium movement. I do am looking for anyone dealing with the new Aquion batteries. I’ve got a couple of potential clients that have inquired about them. Saw them at a NABCEP training session last spring and while the idea is moving I wasn’t impressed.

Re: [RE-wrenches] Load testing Lithium battery bank

From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jerry Shafer Sent: Wednesday, 18 March, 2015 21:57 To: RE-wrenches Subject: Re: [RE-wrenches] Load testing Lithium battery bank We use elite batteries with BMS no problems, the BMS sensor does seem to run

Re: [RE-wrenches] Programmable Battery Charger

Larry, have you tried http://www.quickcharge.com/ Christopher From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Larry Sent: Wednesday, December 17, 2014 09:51 To: RE-wrenches Subject: Re: [RE-wrenches] Programmable Battery Charger boB and Jarmo, thanks

Re: [RE-wrenches] Quantifying power quality, 50 mf capacitor

-Original Message- From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Ray Walters Sent: Sunday, October 12, 2014 16:21 To: RE-wrenches Subject: Re: [RE-wrenches] Quantifying power quality Hi Dan; I, like Larry, must be amazingly lucky then, because we've

Re: [RE-wrenches] 2v metal cased cells

I too am a big fan of Surrette and what I’d be worried about is the sweating and/or moisture that would build up on the steel @ high humidity’s or high dew points. Christopher From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz Sent: Saturday,

Re: [RE-wrenches] PSX-240 wiring question

I've got a similar situation with an old SW-4024. The house is wired entirely for 120vac and is still an off-grid home but at some point the new owners received grid power which they want to use as a back-up. They also want to add a back-up 240vac genny. At first I thought of doing as Dan suggest,

Re: [RE-wrenches] Whisper Parts

Had to share the link below with everyone on the list (I'm not a member of the wind list so someone send there to). But even more fun is the comments at the end of the article. Primus is just the AIR products. No Whisper parts. If anyone finds the parts please share the source.

  1   2   >