Re: [RE-wrenches] 1/2 HP well pump soft start at 120 VAC

WrenchesI think its in the inverter or battery but somewhere before it leaves the inverter flickering lights indicates the inverter is seeing the issue up close, a 4 k inverter is 33 amps AC but Over 166 from the 24 volt batteries if the load if half that with lights and inverter is

Re: [RE-wrenches] Auger for ground mount

The last job I used a mini excavator with auger drive head and put in ground screws worked great only trouble was getting plumb, On Fri, Feb 9, 2018 at 11:13 AM, Chris Mason wrote: > They require you contact a certified installer. That's not happening here. > > On

Re: [RE-wrenches] 1/2 HP well pump soft start at 120 VAC

Dana my 1/2 HP 240 volt pump draws about < 2 amps, which is maybe 3.3 amps if it is 120 volts. I wonder if the high volt drop is leaving your pump in locked rotor for a long time, in which case a soft start will not help. Perhaps a buck-boost transformer (about 150 watts) boosting 16% would get

Re: [RE-wrenches] Older iCel System Lithium Ion Batteries

Gary I have been told that below a certain voltage the LI-ion cells suffer a permanent death. I believe these batteries are small cells in parallel.strings and then series connected strings. to make the voltage.can you use a lab power supply to start the charge? I purchased one for about 60 to

[RE-wrenches] Older iCel System Lithium Ion Batteries

Does anyone have any information or specifications for an older circa 2010-2012 iCel System Lithium Ion Battery. We are doing a repair on an older 48V Lithium Ion system consisting of 3-6 ICel batteries wired in parallel and 1 Xantrex 6848 and 2 Xantrex Conext MPPT 60 150 Solar Charge

Re: [RE-wrenches] 1/2 HP well pump soft start at 120 VAC

Hi Dana, We have been using Grundfos SQ-O 1/2 hp, 5 GPM (or they have a 10 GPM model) soft start pumps for years, with great outcomes. We have sold 60 or so over the years with no returns. Daryl > Hey all you solar wise guys, > > > > I am looking for a recommendation based on your

[RE-wrenches] 1/2 HP well pump soft start at 120 VAC

Hey all you solar wise guys, I am looking for a recommendation based on your experience, not just data sheets for a 120 volt-9.8 amp-1/2HP well pump soft starter. Every time the well pump starts the SW4024 groans and the lights flicker. There are a lot of units that claim to soft start a ½

Re: [RE-wrenches] Auger for ground mount

They require you contact a certified installer. That's not happening here. On Fri, Feb 9, 2018 at 1:04 PM, Larry Brown wrote: > We have been using Techno Metal Posts Helical Piers with much success for > many years > Larry > > Larry Brown > Sun Mountain > 845-657-8096

Re: [RE-wrenches] Auger for ground mount

I’d use a two-man gas auger. Nick Soleil Product Manager Enphase Energy Cell: 707-321-2937 On Feb 9, 2018, at 7:05 AM, Chris Mason > wrote: I'm taking on construction of a ground mount system of about 30KW. My previous

Re: [RE-wrenches] Auger for ground mount

We have been using Techno Metal Posts Helical Piers with much success for many years Larry Larry Brown Sun Mountain 845-657-8096 sunmount...@netstep.net Sent from my iPhone > On Feb 9, 2018, at 11:48 AM, Chris Schaefer wrote: > > While I've been using the Zilla

Re: [RE-wrenches] Auger for ground mount

While I've been using the Zilla platform with an auger attachment for a mini excavator with good luck. With that said I'm looking at Nuance Energy and their Osprey mount which requires a hammer drill. Anyone tried this yet? Christopher On Fri, Feb 9, 2018 at 11:35 AM, Jerry Shafer

Re: [RE-wrenches] Auger for ground mount

Chris Azk around for a fence contractor, they generally have what you need Jerry On Feb 9, 2018 5:05 AM, "Chris Mason" wrote: > I'm taking on construction of a ground mount system of about 30KW. My > previous experience has entailed using a utility truck mounted

Re: [RE-wrenches] Auger for ground mount

I have a two man gas powered unit, not very confident of it. On Feb 9, 2018 11:55, "James "Jibril" Gustafson" wrote: > Hi Chris, > > In the past I have had success with renting a skid steer with auger, or a > mini excavator with auger. With a little practice you can

Re: [RE-wrenches] Auger for ground mount

Hi Chris, In the past I have had success with renting a skid steer with auger, or a mini excavator with auger. With a little practice you can become proficient with the machines, the hardest pasrt is getting a plumb hole. The mini excavator is nice, with a thin digger bucket you can also do your

[RE-wrenches] Auger for ground mount

I'm taking on construction of a ground mount system of about 30KW. My previous experience has entailed using a utility truck mounted auger for the holes but that's expensive. The soil type here is fairly soft, not rock. There's no contractor available with a skid steer mounted auger. I need at