Don't assume anything
In a message dated 2/12/2010 9:07:44 P.M. Eastern Standard Time,
shield1...@yahoo.com writes:
Let me get this right...you are txing on channel 31 and rxing on Channel 1
in the CB band? You are not in the US I assume.
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* Your email settings:
Individual Email | Traditional
* To change settings online go to:
- Original Message -
From: AJ
To: Repeater-Builder@yahoogroups.com
Sent: Friday, February 12, 2010 3:26 PM
Subject: Re: [Repeater-Builder] Re:Portable MSR2000?
Negative on this one - only RX/TX and the power cord coming out of the side
panel on this one. Was hoping
Hello to all,
I am located in Arizona, I am wanting to buy a Motorola UHF MSF5000 model:
C74CXB7106.
If any one has one for sale in good condition, could you please let me know?
Thank you very much.
73's
Felix KC7WVE
480-228-6664
Does anyone know if a Icom IC-F420-10 will work for 429.900 to 434.900?
I am looking to find two 440 radios to link with. Any sugestions would be a
big help.
73's
Rodger
Tom,
Unless you're using a non-standard browser, the instructions for
unsubscribing are at the bottom of each message:
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of tom corso
Sent: Friday,
Go down to the bottom of this page and hit unsubscribe.
- Original Message -
From: tom corso
To: Repeater-Builder@yahoogroups.com
Sent: Friday, February 12, 2010 6:36 PM
Subject: [Repeater-Builder] Please drop me from your mailing list.
k6...@charter.net, thank you. Tom
To unsubscribe from this group, send an email to
repeater-builder-unsubscr...@yahoogroups.com
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chuck Kelsey
Sent: Saturday, February 13, 2010 6:37 AM
Re: 11m Repeater
n9...@... wrote:
Don't assume anything
Probably some of the best advise given on this group.
shield1...@... writes:
Let me get this right...you are txing on channel 31 and
rxing on Channel 1 in the CB band? You are not in the
US I assume.
Doesn't really matter
I do know about and have located lots of FRS, 11m, and MURS Radio Over IP
links on the internet, they are similar to echolink Link type base
stations.
there is one located in Lincoln Nebraska for 11 meters.
there are a bunch of PMR stations in the UK that have radio over ip
connections to the
At 09:23 AM 2/13/2010, i recycle computers wrote:
I would not to see one that was built by some toothless piece of
trailer trash so he can
splatter his alcohol driven filth up and down the band with some unfiltered
over driven linear.
Simply wow
27.315 is channel 31, but 27.965 is not channel 1 - it's in the
freeband. Channel 1 is 26.965.
Joe M.
shield1...@... writes:
Let me get this right...you are txing on channel 31 and
rxing on Channel 1 in the CB band?
my bad. 26.965. was a typo.
- Original Message -
From: MCH m...@nb.net
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, February 13, 2010 11:42 AM
Subject: Re: [Repeater-Builder] Re: 11m Repeater
27.315 is channel 31, but 27.965 is not channel 1 - it's in the
freeband. Channel 1
i recycle computers kc8...@... wrote:
I do know about and have located lots of FRS, 11m, and
MURS Radio Over IP links on the internet, they are similar
to echolink Link type base stations.
I'd honestly have a hard time believing that... and if it
was true I'd have to ask why, because it
I would not to see one that was built by some toothless
piece of trailer trash so he can splatter his alcohol
driven filth up and down the band with some unfiltered
over driven linear.
Simply wow
I know where to get a controller for that setup... already
have the alcohol driven
...and I should hope that it is hams who build these CB repeaters...
My first answer to you was civil, informative, and off list...
...but now it is clear to me that you completely missed the concept in applying
and earning your ham license.
The information is there...Google CB repeaters...
I stayed away from the topic but I'd like to say:
I hope the Rev. part of the sig is a nickname.
As a minister to the motorcycle enthusiast, holier than thou name calling,
is not the prime directive of said Reverends.
I've got all my teeth (save one wisdom), don't consume alcoholic beverages,
I am in the process of installing a new 6 Meter GE Mastr II repeater for
our radio club, it came with a pre-programmed RLC-4 controller since the
package was removed from service elsewhere. I don't loaded the software
on the RLC-4 site but found out that I cannot use it to read the
controller,
A while back I posted a WTB for the above. A few people responded but
unfortunately the e-mail chain on the one good prospect seems to have
gotten lost.
So once again I'm looking for a used 220 MHz pass cavity (not pass-notch,
not window filter a la DCI). Thanks.
Bob NO6B
Agreed , pretty much insults a lot of people with such a derogatory
generalisation
might be time to drop the subject having established it could be done but wont
B
To: Repeater-Builder@yahoogroups.com
From: ah...@ah6le.net
Date: Sat, 13 Feb 2010 09:29:00 -0800
Subject: Re: [Repeater-Builder]
Andy
The attached will get you started with a repeater on port 1, and 3 remote
bases on 2 3 and 4.
There are no id's included, although the contents have a line that deletes
them.
Follow them with a new ID on the next line.
It has a cactus style beep boop - but you can change it to
Bill-thank you VERY MUCH-great way to get me up and running.
Andy
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Bill Hudson
Sent: Saturday, February 13, 2010 3:39 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] RLC-4
Should you not have a copy of the manual, you can get one from my website;
it is a great help and is how I learned to program those controllers.
http://www.n7tgb.net/Pages/radio/controller_manuals.htm
Richard
www.n7tgb.net http://www.n7tgb.net/
_
From:
Thanks Richard, I will go get it!
Andy
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Richard
Sent: Saturday, February 13, 2010 4:15 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] RLC-4 Controller
Should you
Bob
I had replied and dropped the ball on checking my inventory. I just
pulled down a two bp cavity series set from a combiner down from
storage and swept one cavity. It's from sinclair and is part 4 of 5
model ctr28140. What spec do you need?
Don W5DK
Sent from my iPhone
On Feb 13, 2010,
This repeaters amp runs on alcohol? Green!!! LOL
From: skipp025 skipp...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Sat, February 13, 2010 1:16:54 PM
Subject: [Repeater-Builder] Re: 11m Repeater family tradition...
I would not to see one that was
wow...my glassesI must need new ones...I didnt even see that!! I saw .965
and didn't think to look at the rest of the freq! Sorry!
From: MCH m...@nb.net
To: Repeater-Builder@yahoogroups.com
Sent: Sat, February 13, 2010 12:42:08 PM
Subject: Re:
Hey Rev, you got teeth... right?
From: Ken Arck ah...@ah6le.net
To: Repeater-Builder@yahoogroups.com
Sent: Sat, February 13, 2010 12:29:00 PM
Subject: Re: [Repeater-Builder] Re: 11m Repeater
At 09:23 AM 2/13/2010, i recycle computers wrote:
I would not to
HOW MUCH DO YOU WANT FOR THE SYSTEM?
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of k7...@skybeam.com
Sent: Saturday, February 13, 2010 5:26 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Kenwood repeater TKR-850 and Link Comm
Hello all, I think we have heard enough pointless post about a non ham repeater
topic. Please stop!! this is a good group of serious people used for ham radio
purposes not CB central.
Thanks, Greg Niles K9GJN
--- On Sun, 2/14/10, Pointman shield1...@yahoo.com wrote:
From: Pointman
Hi Larry,
I will take $1650 for the repeater and controller. If you want it please
call me if you want it.
Mike Mullarkey K7PFJ
6886 Sage Ave
Firestone, Co 80504
303-736-9693 Office
303-954-9693 Fax
303-718-8052 Cellular
_
From: Repeater-Builder@yahoogroups.com
Hi Larry,
Please keep in mind that the complete repeater and controller is 5 month
old.
Mike Mullarkey K7PFJ
6886 Sage Ave
Firestone, Co 80504
303-736-9693 Office
303-954-9693 Fax
303-718-8052 Cellular
_
From: Repeater-Builder@yahoogroups.com
RE: 11M Repeater
This thread is now closed. Period.
Kevin Custer
List Owner
What I really want is the Kenwood. I have a controller. If you end up with
a buyer for the controller, I would be interested in the Kenwood
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of k7...@skybeam.com
Sent: Saturday, February 13, 2010 7:28 PM
Hi Larry,
I don't have to sell as a package so that is no problem at all. What are you
thinking on the repeater.
Mike Mullarkey K7PFJ
6886 Sage Ave
Firestone, Co 80504
303-736-9693 Office
303-954-9693 Fax
303-718-8052 Cellular
_
From: Repeater-Builder@yahoogroups.com
Er, I beg to differ... I've seen it done, but the folks who did it aren't
talking, or are just too busy to share right now.
--- In Repeater-Builder@yahoogroups.com, Paul Gilbert ke5zw...@... wrote:
Won't work, tried it already. Have to do lots of compent changes to get it
down.
On Mon,
That could indeed be the issue - I didn't think of the fact that the DSP could
be monkeying with it.
With that said, the RLC-MOT could be removed from the system, but the next
question would be this:
How can I set the station up such that I have a PL detect AND a carrier squelch
detect?
We
Fellas,
I recently bought one of these CPX220-12 220 MHz cavity filters from Fair
Radio Sales:
https://www.fairradio.com/catalog.php?mode=viewitemitem=3886
just to see what it was. It is a true bandpass cavity, with identical
coupling loops behind the two N connectors. The one I received could
If CBers are asking about building a repeater, tell them to get a ham license.
Greg, note that while the original topic may have run its course, and has been
a bit of a groaner, this list is not intended by the owners to be limited to
ham repeater topics. Much of what is here by deals with comercial land moble
radio repeaters.
73,
Paul, AE4KR
- Original Message
I have an Old Kenwood TM-3530A 220 Radio I need to be able to send TT To work
on My Repeater Controller
The radio works fine I have a TT Kenwood Mic Good Audio but NO TT , I took it
apart and cleaned Everything and Still No TT ,
So I tried the Mic on My Kenwood TS-2000 Audio and TT Works
41 matches
Mail list logo
