I cannot go have 2 work !
next 11 days , overtime not really...
Holiday SKED
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org Life Member A.R.R.L.
- Original Message -
From: Lou Harris [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, May 17, 2005 10:43
They used the SAV-17 in a Kenwood TM-241a 2M. mobile also may use it for 5W.
packet when I get around 2 it .
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org Life Member A.R.R.L.
- Original Message -
From: Q [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent
to it and then run 5
watts some evening make their jaw drop ...
they need a REAL DEMO...!
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org Life Member A.R.R.L.
- Original Message -
From: Ronny [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, May 14, 2005 12:04 AM
Subject
a TEE ???
ok when you want both antennas to XMIT Recieve at the same time a Tee is
designed for that purpose, but for repeater that will not fly !
My sugguestion the ARRL Handbook and some primer on repeaters, this stuff is
on the Extra Exam BTW
Mark Holman
[EMAIL PROTECTED]
http
money
spent in parts etc.. Id sell it on a broadcast web site or a broker may buy
it.
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org Life Member A.R.R.L.
- Original Message -
From: mch [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 29, 2005 10:46
Say Skipp 025 !
Actually very well thought of, at least we are not banging heads flam
throwing etc.. I decided to save that one !
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org Life Member A.R.R.L.
- Original Message -
From: skipp025 [EMAIL PROTECTED]
To: Repeater
RG 58/U and both I think was 1/4 to 1/2 wave apart .
I think it may be related to tuning the circuit thru the coax 75 Ohms If I
recalled, then you tune each Antenna for lowest SWR taking 1 at a time off
to tune.
and your optimal spacing was same ...
2M. good Q. give it a try .
Mark Holman
ANY Lobanders in that group ? like 45 thru 50
Mhz. ? something is up in the air right now being asked indirectly to help out
when I have very little time right now seems kinda odd ? for me that
is.
Mark Holman[EMAIL PROTECTED]http://www.ab8ru.org
Life Member A.R.R.L.
- Original
web site is http://www.antenna.com/ I imagine that they may have someone
there who would know.
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org Life Member A.R.R.L.
- Original Message -
From: kg4ogn [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, April
Dawg gone Ken are'nt you a AARP member yet ? now I can get away ABT saying
that just turned 50 last week ( snicker ! )
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org Life Member A.R.R.L.
- Original Message -
From: Ken Arck [EMAIL PROTECTED]
To: Repeater-Builder
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org Life Member A.R.R.L.
- Original Message -
From: kg4ogn [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, April 24, 2005 8:09 PM
Subject: [Repeater-Builder] Antenna Specialists Antenna
Hello All,
I
Hi;
I just did a Google Search so here's the link
http://www.bommeltje.nl/scanners/english/wintone.shtml looks like an
interesting site :-)
73
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org Life Member A.R.R.L.
- Original Message -
From: Ralph Mowery [EMAIL
.
but there may be a commercial 2 way software program to give you an idea of
the coverage the repeaters will generate.
Just some stuff off the top of my head.
Mark Holman[EMAIL PROTECTED]http://www.ab8ru.org
Life Member A.R.R.L.
- Original Message -
From:
[EMAIL PROTECTED
Yeah may help the audio especially when you get some person who tends to
talk like he's has to scream which I know happens on one repeater I know
surprised the repeater does not clip his audio or something.
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org
- Original Message -
From
I would attempt to say a noise cancelling mic. something like a SHURE Comm.
Mic. or something like they used in Avaition the center slot style forget
those ugly cheap 11M. mikes ( sledge hammer anyone ? ) may help the road
noise.
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org
sleeves are thin and split under heat.
just my 3 cents worth ( upped a penny due 2 inflation ! )
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org --- My New Web Site 03/31/2005
- Original Message -
From: Bob Dengler [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday
Anyone have info. who would buy up the PL or CTCSS
boards for Standard / Heathkit and other parts ?, I know this is off subject but
thought to ask.
Mark Holman[EMAIL PROTECTED]http://www.ab8ru.org --- My New Web Site
03/31/2005
Yahoo! Groups Links
To visit your group
engineering
someone could design such a system. just some thoughts there. and be
Energy Star compliant ???
Mark Holman
[EMAIL PROTECTED]
http://www.ab8ru.org --- My New Web Site 03/31/2005
- Original Message -
From: Dave VanHorn [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
It seems that there is only a few items there
so far.
any idea what country this is located
?
Mark Holman[EMAIL PROTECTED]http://www.ab8ru.org --- My New Web Site
03/31/2005
- Original Message -
From:
ian wells
To: Repeater-Builder@yahoogroups.com
Sent
Wouldn't it be much simpler to charge the battery
B4 installing it ? playing safe that way
Mark Holmanmark.holman at talkamerica dot net
- Original Message -
From:
Per Molund
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, March 26, 2005 8:42
AM
Before ya blow yer gasket here is absolute truth ..
I have a cousin with same Full name ! only he was born in Ohio me in
Michigan doesn't that really blow your mind !
Mark Holman
mark.holman at talkamerica dot net
- Original Message -
From: Jeff [EMAIL PROTECTED]
To: Repeater
Did he happen to have a 11 Meter Radio by chance ? sounds like on of them
self proclaimed Golden Screwdriver Technicians.
Mark Holman
mark.holman at talkamerica dot net
- Original Message -
From: Brent [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, March 26
They did enclose that w/ windows O/S es as part of
the package deal unless there is something extra I don't know
about.
Mark Holmanmark.holman at talkamerica dot net
- Original Message -
From:
K.
Venkataramanan
To: Repeater-Builder@yahoogroups.com
Sent:
I had a freind fellow ham who found some of the classic B battries and stuff
somewhere in Chicago, IL. if the unit has a battery supply of some sort but
I am guessing standard 120 VAC
just my 3 cents worth, cost reflected due 2 inflation.
Mark Holman
mark.holman at talkamerica dot net
have
. for creativity I
had some really jealous people who could not be creative starting to well
started to get bad mouthed... oh well.. :-)
Mark Holman
mark.holman at talkamerica dot net
have you reformatted your hard drive lately ?
- Original Message -
From: Mike Perryman [EMAIL PROTECTED
Say Joe;
Doesn't the sheilding have to be critical?, I don't have a spec
manual of any sort but If you bought the coax of a brand like Belden for
example the specs will be there.
Just curious.
Mark Holman
mark.holman at talkamerica dot net
have you reformatted your hard drive
I have monitored over here on the West Mi area that same stuff going on
however there is a limits alomg that coridoor that they limit the power and
I am glad I am west of that line myself.
M. H.
- Original Message -
From: Q [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent:
Any bugs in the software ?
M. H.
- Original Message -
From: Mike - WM4B [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, February 01, 2005 4:03 PM
Subject: [Repeater-Builder] Programming PL on a CAT-1000 controller
Greetings all,
I've recently joined up
Come on gang !!
Can't we all get along ! I am really just
hitting the delete key on this Rage of finger pointing.
the thing is just email each other and please take this off list !
Thanks !
M. H.
- Original Message -
From: David Robichaux [EMAIL PROTECTED]
No Thanks either .. too many people living short lives over there between
kidnapping, and brutal murder over there I would rather live here and live
as long as I can.
as Jimmy Cricket used to sing.. I'm no fool nosiree, I am gonna live to be
103 ( maybe longer !! ) ...
MAH
- Original
How about this ? depending on the size of this coiled coax assembly I would
put it in the metal box as Jim mentioned and run a couple of barrel
connectors, thru the wall of the box, solder the barrel connector to the box
for RF tight seal, and seal the box itself.
M. H.
- Original
Try their web site http://www.polyphaser.com/ I recalled a book they gave
away on grounding, but I will say this from a Electrical Instructor... When
in doubt ground the out of it !
The web site has some interesting info at Technical Docs. part some good
reading there. the Engineering
I can read Ted's site up here in Michigan you may want to call your repair
department I had to a few times already ranging from static on my telco
lines to slow as a snail Connect Speed also ask them ( which really gets
their goat ! ) when are they switching to Fiber Optic Cable ? Telco
I cannot recall the Bands used for Public Saftey Freq.s when they used what
was called Mobile Extenders, but I believe that they used 2 different bands
in Michigan something like VHF Hi to VHF Lo . I was wondering if you were
( being more expense of course for the Volunteer ) using a VHF -
If it keeps Spammers or Spam Bots in a state of Confusion better for us
anyway.
M. H.
- Original Message -
From: skipp025 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, January 09, 2005 9:03 PM
Subject: [Repeater-Builder] Re: F.S. List
Here's the example of
How about if the WX signal could be boosted by a 2M. beam ? 3 or 4 elements
should do the trick.
M. H.
- Original Message -
From: Joe Montierth [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, January 12, 2005 6:53 PM
Subject: Re: [Repeater-Builder] simple tone
Motorola was somewhere Jettisoning the FLEX Paging Technology and that would
have put Arch Comm. in Chapt. 11 based from an old article in Radio Resource
Magazine , thats also what Motorola was doing also.
probably more than 2 stories out there in Space
M. H.
- Original Message -
Did you try checking their FAX Back off of their web site ?
all you have to do is plug in the cat no. and bingo you can print off much
of the docs you can do .
works for me.
M. H.
- Original Message -
From: kd4gpi [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent:
Wanna read whats really interesting ?
Civil Air Patrol uses a offset on this one repeater 140-143 Mhz. area (
Being I cannot really recall the input ) and their Output is 149.XXX Mhz.
apparently its either their Bandplan or they have in their plan to keep
unauthourized people from finding
@yahoogroups.com
Sent: Saturday, January 08, 2005 11:58 PM
Subject: Re: [Repeater-Builder] Re: Motorola microphone schematic
Are you seriously looking for the schematic diagram for the TU-154?
Neil
Mark Holman wrote:
Say Rob.
Ye olde ancient stuff Motorola probably never gave
Forest Service,
Start by finding out any protected land by every
political , envirmental, tribal land including sacred burial sites, I would
reasearch everything before you sign on the dotted line, I would ask what
paperwork is involved and ask for any help or who
Try this site --- http://www.apcointl.org/
M. H.
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, January 06, 2005 11:35 PM
Subject: Re: [Repeater-Builder] question on repeater set up...
apco is the public saftey communications
, if you can remember which radio you had it
connected to when you installed it, I probably have the manual
Was that a FMTRU-5V ?
Neil
Mark Holman wrote:
type in TU-154 for Motorola, an old remote head with a amplified
mic.older
than dirt 1964 I think.
I had one or 2 my dad gave me
once was some group called O.F.A.R.T.S. I think it was a ham club seen them usually at
the Marshall, MI. hamfest.
M. H.
- Original Message -
From:
[EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, January 08, 2005 11:50
AM
Subject:
.
Thanks -Rob-
--- In Repeater-Builder@yahoogroups.com, Neil McKie [EMAIL PROTECTED]
wrote:
Not a problem, if you can remember which radio you had it
connected to when you installed it, I probably have the manual
Was that a FMTRU-5V ?
Neil
Mark Holman wrote:
type in TU-154
to UNSUBSCRIBE ? Yes
or No ??Bye !!
Mark Holman AB8RU says 73 !!
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater
type in TU-154 for Motorola, an old remote head with a amplified mic.older
than dirt 1964 I think.
I had one or 2 my dad gave me no radio though :-(
M. H.
- Original Message -
From: Rob [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, January 05, 2005 1:15 AM
assume the worst in people! I actually use an AOR scanner on
my repeater to listen to select frequencies on all ham bands 160m thru
1.2ghz. This is a high quality scanner and I do not recommend using the
cheap ones,they are too prone to interference.BTDT73,Lee,N3APP
Mark Holman wrote:
You
Just Get a Spam Blocker or Upgrade to WIN XP SP II I love it !
M. H.
- Original Message -
From: John Everson [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, January 02, 2005 2:06 PM
Subject: [Repeater-Builder] O.T. Is it just me?
Happy New Year to the
Just another freindly reminder how important Amateur Radio really is makes
cause for a good argument if anyone questions how its really done.
maybe we should teach the Military how to be Hams show them how radio
works..
M. H.
- Original Message -
From: Eric Lemmon [EMAIL
You cannot rebroadcast Public Saftey on Ham freqs. I'll give you a classic
example in Michigan when I was at a meeting...
Woman unknown was rebroadcasting police locations where the RADAR speed
traps on 11 Meters CB CH. 19 needless to say Sheriff got ahold of this and
arrested her and she
Matt All,
If you have any ground connections going to the body just grab a
piece of sandpaper Disconnect your Batt leads on both sides on Ford
Dodges a battery terminal brush you will need to clean, also sugguestion get
those felt chem. treated Washers and place on the bottom,
Say Neil;
XYL would have a fit If I did that ! and I still have
whatever in the Attic
M. H.
- Original Message -
From: Neil McKie [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, January 03, 2005 6:25 PM
Subject: Re: [Repeater-Builder] Re:
Probably some security thing to if someone hacked it probably design to
break up as a useless device
CATV Systems used to come up with security anti-hacking measures to prevent
theft of services.
M. H.
- Original Message -
From: aa5sg [EMAIL PROTECTED]
To:
I have seen the VHF Low Banders in use ( 47 Mhz. ) for Red Cross Comm. I
seen several units in service, so far I have not heard any complaints, and
in the Radio Room for the Amateur Club during a Emergency Exercise the
Midland was on NEF 47.420 Mhz. and there was dispatch calls coming in on
Well if someone wants to clean the EQ on the audio at any power level and
not leave your ears ringing or any other problems, no problem to that.
But the rest maybe a pair of earplugs may do the trick...
old Cerwin Vega Ad. Loud can be beautiful, as long as it's clean
I used to
I think that I should stick to my thinking Have all the FCC Commissioners
that are from each level Qualification
1) That they have a Extra Class License.
2) Hold a Degree in Electronics like Broadcasting.
3) Been say 20 Yrs Min. in the feild.
4) Hold a GROL , 1st. Class RT that was converted
I will say this ... this one Stereo / Trucker shop and a source for older
out of catalouge R/S stuff but he rather sell the stereos Illeagle gear ,
he does not like talking to me when I said I have a Ham license. tells you
how many times he figgures the FCC was next in line :-)
M. H.
-
TNX Budd ;
Wonder how many more sneaky stuff they will create ?
Mark Holman AB8RU
*** IT Student *
Happy Holidays
- Original Message -
From: Budd Turner [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, December 29, 2004 10:15 AM
Subject
Hi everyone.
I was given a copy by someone, at least it does work
Thanks
Mark Holman AB8RU
*** IT Student *
Happy Holidays
- Original Message -
From: Tony King - W4ZT [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, December 27, 2004 12
I know a Repeater that uses the ABCD commands in theirs and one is speed
dial to A A A auto service ? I think they still do !
Mark Holman AB8RU
*** IT Student *
Happy Holidays
- Original Message -
From: Jim B. [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday
Here we go again !
Mark Holman AB8RU
*** IT Student *
Happy Holidays
- Original Message -
From: Coy Hilton [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, December 22, 2004 6:54 PM
Subject: [Repeater-Builder] Re: HELP: 2 meter repeater intermod problem from
is to the non tech
people you just impressed you know something thats all.
Mark Holman AB8RU
*** IT Student *
Happy Holidays
- Original Message -
From: Benjamin Naber [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, December 23, 2004 6:08 PM
Subject: Re: [Repeater
Millihenery Microhenery is the terms used depending on the application of
a particular circuit.
What I have not seen for a long time is the old J.W. Miller coil winding
device. maybe at a Antique radio swap maybe.
Mark Holman AB8RU
*** IT Student *
Happy Holidays
- Original
It seems that I tried to download it WIN XP SP II does not reconize it said
invalid handle.
Mark Holman AB8RU
*** IT Student *
Happy Holidays
- Original Message -
From: Tony King - W4ZT [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, December 23, 2004 8
of these types on 2M. have carried their so called
professionalism, and after monitoring or talking to these YAHOOS makes you
wonder.
Mark Holman AB8RU
*** IT Student *
Happy Holidays
- Original Message -
From: w9mwq [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent
technical in nature nad some in PDF file
Mark Holman AB8RU
Happy Holidays
- Original Message -
From: talviar4499 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, December 21, 2004 1:45 PM
Subject: [Repeater-Builder] antenna question for 2M ham. . .
OK.
One
Hey I think I'll have mine for Christmas, along with mashed potatoes and
Gravy GD ! BTW my initials are MAH reverse HAM !!
I guess I am a Ham I am !
Keep on smiling !!
Mark Holman AB8RU
*** IT Student *
Happy Holidays
- Original Message -
From: mch [EMAIL PROTECTED
Something like that should be passed along to the Repeater Council or the
Official Observer to see if they can talk to this individual. unless he
wants to be famous in the ARRL web site with a letter from the FCC or
something.
I can't offer any other solution.
Mark Holman AB8RU
Just go to http://www.fcc.gov do some research, forms fees
etc. and some paperwork.
if you do your own matienance etc. I would sugguest
getting with the local 2 way shop for ideas etc..
Mark Holman AB8RU*** IT Student *Happy Holidays
- Original Message -
From
a waste
of my time so I deleted my Account and laughed at the Idiot !
Life is too short anyway Have fun !
Mark Holman AB8RU
*** IT Student *
Happy Holidays
- Original Message -
From: Coy Hilton [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, December 21, 2004 6:34
polairity , simple fix with the iron and a peice of wire jumpered ABT 3
inches viola working radio.
also a short in the radio on a 2M . Heath short also
blew up the cap I replaced. been there blew up that !.
anyway Smile on life is FUN !
Mark Holman AB8RU*** IT Student *Happy Holidays
Its called tweaking the Spam Filter, and its not a set it and forget it.
I have continually have to check the TRASH bin and train the program what to
ignore or trash it.
SOFTWARE is not a perfect componet subject to revisions, bugs, fixes, Beta
Versions, etc..
Mark Holman AB8RU
Happy
What About Hutton ?
Mark Holman AB8RU
Happy Holidays
- Original Message -
From: Neil McKie [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, December 17, 2004 1:47 PM
Subject: Re: [Repeater-Builder] Source for custom made cables
TESSCO lost points with me
And I'll add as indecisive lately the way things are going you hope to
contact a Engineer ( @ the FCC ) if you are absolutely lucky to acquire a
list.
but thats not a reality here.
Mark Holman AB8RU
Happy Holidays
- Original Message -
From: Jim B. [EMAIL PROTECTED]
To: Repeater
What about this Ramsey Service Monitor ? Is it good or just something to
advoid ?
Mark Holman AB8RU
Happy Holidays
- Original Message -
From: wb6ymh [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, December 14, 2004 12:25 AM
Subject: Service monitor question
Also try this site http://www.plannetfeedback.com weather this business is
registered there who knows, but such a posting will be public information.
works with places like Wendys, Magic Chef / Maytage, etc.. I either get a
reply , by phone or letter, or an email.
Mark Holman AB8RU
Happy
Spread Spectrum was actually a early design by the late actress Hedi Lamarr
and George Antheil check out
http://en.wikipedia.org/wiki/Frequency_hopping#Invented_by_a_movie_star
interesting stuff .
Mark Holman AB8RU
Happy Holidays
- Original Message -
From: Coy Hilton [EMAIL
!!
Another Chevy Vega mishap !
Mark Holman AB8RU
Happy Holidays
- Original Message -
From: Richard W. Solomon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, December 08, 2004 11:54 AM
Subject: Re: [Repeater-Builder] Re: controller madness (whiz' bang -
sparkle
like Nextel vs. BAS rebanding ,
and a few other Big Name Businesses who have bigger wallets, and K1MAN and
other things we all know !
Mark Holman AB8RU
Happy Holidays
- Original Message -
From: Wade Lake [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, December
I just hit the delete button the Red X , not to be confused with the other
Red X ( for those who are DSCC members of the Low Band )
Mark Holman AB8RU
Happy Holidays
- Original Message -
From: Kevin Custer [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com; Repeater-Builder list
that using ROIP
or Echolink between the 2 repeaters this would eliminate interference over
UHF, as well wiring the 2 together. GR8 IT experience.
Mark Holman AB8RU
Happy Holidays
- Original Message -
From: w9mwq [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday
Yes I do Agree, but mostly clubs tend to apply for a Vanity Call ie W8LRC
is Lowell Radio Club and W8LHS is Lowell High School so the club
subsitutes a Club call under the old Sys. and comes up with this Vanity Call
which to me is cool, but it works GR8 4 everyone.
Mark Holman
Isn't Radio
I thought on 10 M. that some are tone access ?
I think Chicago, IL did ??
Mark Holman
Isn't Radio Fun !! ??
- Original Message -
From: Wade Lake [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, December 01, 2004 8:00 PM
Subject: Re: [Repeater-Builder] ten meter
I'll agree with Tony ..
An Amateur is considerate towards others,
part of the Radio Amateurs Code I don't flaunt my license
class towards anyone, or that I am persuing advanced interests in
electronics.
I have been in other Chat-BBSes that are purely BS with an
arrogant person
. for that freq. range ?
Curious ?
Mark Holman
Isn't Radio Fun !! ??
- Original Message -
From: Mr. Edgar McKinney [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, November 25, 2004 11:45 AM
Subject: Re: [Repeater-Builder] IC 2720
I now have 3 2720s and yes they are ham
to answer your FCC Question go to http://www.fcc.gov
Is broadcasting your gig ? try http://www.sbe.org
also type in Broadcasting in Google be surprised to fin alot of stuff ...
Mark Holman
Isn't Radio Fun !! ??
Electronics Student
- Original Message -
From: Marty Moilanen [EMAIL
I could
care less if its trunking capable, but I probably use em oh once in awhile.
Just busy now w/ XYL !!
Mark Holman
Isn't Radio Fun !! ??
- Original Message -
From: Mathew Quaife [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, November 27, 2004 12:22 AM
also those cheap plastic insulators that melt to a solder iron on PL-259's
those too I threw out cannot remember what place had em ! but absolute junk
!
Mark Holman
Isn't Radio Fun !! ??
- Original Message -
From: NĂ˜ATH [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent
if the oil is petro based you may keep the steel rims rustproofed, but may
ruin the tires over time. any oil soaked rubber parts from a petro base
point of view would make things kinda bad.
Mark Holman, CRO
AB8RU
- Original Message -
From: Al [EMAIL PROTECTED]
To: Repeater-Builder
) the cable
may be a different type also .
anyone want to input on this ??
Mark Holman, CRO
AB8RU
- Original Message -
From: VA3EXT [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, November 25, 2004 5:43 PM
Subject: [Repeater-Builder] Co-Phasing two Sinclair SRL-210C4
ad in Mission Critical NOV-DEC 2004
NKX
1814 Hancock St
Gretna, LA. 70053
ph. 504-361-5525 ( In LA ) 800-237-6519
Fax 504-361-5526
They buy sell used XTAL Elements If thats whay you are looking for
Have a Great Turkey Weekend.
Mark Holman, CRO
AB8RU
- Original Message
I have my SSB 2 on the roof of my car and the 10M. on the trunck deck not
deck not trunk lip ! when you talk on either you get the usual desense and
the S meter moves along .
Happy Mobiling !
Mark Holman, CRO
AB8RU
- Original Message -
From: Tony King - W4ZT [EMAIL PROTECTED
You mean toast everything ! !!!
Mark Holman, CROAB8RU
- Original Message -
From:
Q
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, November 25, 2004 4:23
PM
Subject: Re: [Repeater-Builder] GE MASTR
ER41 Receiver Low Audio Output
Sure will cause
if the continuity of Resistance is Zero
Ohms. from Chasis, Cabinet, rack, etc.. especially green crud from moisture
will start a resistance path to ground.
a good oscilloscope check will indicate intermittent, as well a VOM check.
Good Hunting !
Mark Holman, CRO
AB8RU
- Original Message
I found an On Line Search try these
Transistor Search Results
Keyword: M9466
48-869191 M9466
48-869143 M9466
48-869466 M9466
M9466 48-869191
web site is
http://www.ee.washington.edu/circuit_archive/parts/cross.htmlhope this
helps.Mark Holman, CRO
AB8RU
-
I have some news regarding tire talc from the Tire Manufacturer Firestone /
Bridgestone, they told me that they only use it in production. Dead End there.
may have another answer in a few days.
also their email was private so I could not fwd it to the group .
Mark Holman, CROAB8RU
I bought Kelly Tires for my 1994 Dodge Shadow and I use regular Air , one
thing ABT Dodges is that they designed their vechicles for 2 way
applications like running DC PWR cables thru a rubber plug that slits w/a
jackknife.
204,700 Miles and still running.
Mark Holman, CRO
AB8RU
.
Mark Holman, CRO
AB8RU
- Original Message -
From: Q [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, November 17, 2004 11:23 PM
Subject: Re: [Repeater-Builder] radial tire static?
And can you imagine the path is thru your wheel bearing? Can you believe
I just sent an email to bridgestone, also looked in Google search , all they
talk about is tire talc for Bicycycles, I probably presume he has plastic
hub caps also. the old days of metal caps was some sort of spring device .
when I get a response I'll post 4 everyone.
Mark Holman, CRO
AB8RU
1 - 100 of 158 matches
Mail list logo