. In other words, do what you can to insure your
receiver is not hearing your own transmitter's sideband noise on it's
input. Pass cans tuned to the TX frequency or NOTCH cavities tuned to
your *RX* frequency placed in the transmit line are your best hope.
Good luck,
Scott
Scott Zimmerman
Amateur
if this is from a Low-Band, VHF, or UHF high
power station.
Let me know what you've got and how much $$.
Thanks,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
This Has gone on WAY to long.
This thread is now OVER!!!
Let the bannings begin!!!
I have shut this list DOWN in the past and will again.
Scott Zimmerman - List Co-Owner
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Brian Raker wrote:
He probably
Scott Zimmerman wrote:
This Has gone on WAY to long.
Ok, reading the rest of the message I replied to makes me think that I
jumped the gun a bit here. When I saw the 20 e-mail messages in the box
beating the same slip-up OVER and OVER again, I went off the deep end.
Fellows I think
I found a phone number for Glenn. I called and left a message offering
web space on the RB site for his 222 maxtrac conversion article.
Hopefully we'll get a positive response.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Mike Morris wrote
- Diplex Antenna Manual.
This document is written for use with standard base-loaded mobile
antennas only.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
skipp025 wrote:
However, you can get a tk-6110 to do both 10 and 6 meters in
the same radio. I
.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
skipp025 wrote:
You guys are silly...
Consider changing your group settings to read on the web
using a web browser. Then... simply locate the group with
your web browser bookmark anytime you want
If you have a RX 5C or 2C -or- a phase 5C or 2C ICOM, you can transplant
the compensation circuit into a EC PLL ICOM. There are only 3 pins
involved. There is some degree of skill required as the compensator
circuit is built on a ceramic/glass substrate and is somewhat fragile.
Scott
Scott
I was wondering about that myself. The bandwidths spec'd just didn't
seem to compute in my feeble mind.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Jeff DePolo wrote:
Florida Repeater Coordinator proposes narrowbanding:
http://www.florida
If only I lived in Texas.. Humph!!
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
wb5dcu wrote:
I am cleaning out the shack and I have the following radios I would like to
give away:
7 - Motorola Micor VHF Mobiles
5 - Motorola Micor UHF
If you have a spectrum analyzer, be sure and check it for spectral
purity. *Most* radios don't like to have their power cut back that far.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Joe wrote:
Hello to All,
I want to turn the power down on my
.
Thanks,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
hours NE of Knoxville. I'm sure reasonable
compensation would be offered. I'd help him out myself, but it's a 7
hour drive for me.
Let me know if you'd be willing to give it a shot and I'll put you in
contact with the gentleman directly.
Thanks,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
about
ready to put it on FleaBay, but I would rather do a done deal than go
that route.
Make me a reasonable offer in a personal reply and it's yours.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Chris Curtis wrote:
My biggest likes of the ff-800:
5 radio
I agree. Let's let this die.
Scott - List Co-Owner
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Ken Arck wrote:
Oh, this is not going to end well :-)
Ken
!!
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
La Rue Communications wrote:
Could not find the original post, so I wanted to ask, what state is
currently being taxed, or does it apply to the entire Country? (I am
aware the FCC regulates Nation-wide
I've had enough of this guy. He's gone.
You're all welcome.
Scott - List Co-Owner
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
kevin valentino wrote:
*Hey you still owe me 3 # bucks for sending you a Uniden key!* Hope
the whole world knows know! you
Don't even bother to look in your own back yard, Eh??
(Folks, I *have* to rib him, he's a local and has been to the RB shop
MANY times!!)
I have one!!
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
terry_wx3m wrote:
I'm about to interface a ACC RC-85
Ummm...
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
terry_wx3m wrote:
You were on vacation and I was lonely
--- In Repeater-Builder@yahoogroups.com, Scott Zimmerman n3...@... wrote:
Don't even bother to look in your own back yard, Eh??
(Folks, I
Did I do the transmitter as well? (I don't remember. I do so many projects.)
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Lee Pennington wrote:
Exactly right, Scott did the coils and castings on mine five years
ago.Hasn't been touched since
He was running split antennas and is wanting a duplexer so he can use
the remaining one that's good. (I read between the lines.)
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
cruising7...@aol.com wrote:
Say what?
In a message dated 5/27/2010 12:09
to investigate and found the guy drilled two holes right
straight through the radio and used two lag bolts to fasten it to the
dash!! It sure wasn't going anywhere in a crash!!
Next..
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
in /out and are rated for 100W or so.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
tritium242 wrote:
Hello all. We have a cross band repeater (Midland 100W VHF low w/ 1W VHF high
band repeater built in).
What we noticed is that in the High Band -- Low Band
, they
simply burn up and th problem fixes itself. The 10V regulator doesn't
have enough guts to burn them up, so they stay shorted and wait for
someone to find them. Often times it is a cap on the mixer board. Those
are fed though a resistor of a few ohms.
Good luck,
Scott
Scott Zimmerman
Amateur
insurance on the products they vend. It seems rather stupid to me, but I
guess that's what happens when lawyers get involved.
Input appreciated.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Yahoo! Groups Links
and the load balancer
shorted out!! Replaced it with one scavenged from a Micor and all works
well.
Thanks for all those that helped me in my quest. I'll print this new
procedure and put it in my manual for future reference.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA
Lee,
Does your manual include a flowchart for Power control servicing?
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
ve7fet wrote:
Hi Scott,
Finally got to dig out my MSF manuals for a look.
Looking on the schematic, I see JU1 and JU2 being related
an error on the LED
display, then the station resets.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
ve7fet wrote:
Hi Scott,
Do you know if the power sense is hooked up/working?
I seem to recall having this issue when trying to use a MSF5k with a non-MSF
in the manual for a troubleshooting flowchart
type message would be helpful.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Those that were having issues, please try it again. I think I found the
bad code. (I'm not sure how it got there) I'd like a few people to check
and see if there are still issues.
Thanks,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
George Henry wrote
Dick,
I have two that I removed from a 10M transmitter I built. I am fairly
sure they are 12 split RX's. E-mail me privately if you are still in need.
Scott
n3xcc at repeater-builder.com
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Richard W. Solomon wrote
remember someone saying that some other company had made an
analog capable D-Star controller? Do any of you list members know
anything about that?
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Nate Duehr wrote:
On 4/1/2010 9:57 PM, George Henry wrote:
I
Nice. I like it. Interesting radio. I need to get one of those. Are they
available from *any* Motorola dealer, or do you need to contact internal
sales directly at 1-800-422-4210 and ask for it specifically?
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
hardware or grounds.
Good luck,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Richard wrote:
I know its been a long time since I first posed the question on what might be
causing the noise we were experiencing after being hit by lightening. After
many trips
at
rfparts.com. You'll need to look for one with the output power you
desire at the input power you need.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
tahrens301 wrote:
Hi Folks,
I've been looking into making a solar repeater (from the
Micor repeaters that I
, but to put that much horsepower
into a project that is so simple seems like overkill.
I *suppose* I could use a RC-1000, but I've never been much of a fan.
(sorry Ron)
Suggestions?
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Didn't look like it when I looked it up.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Chris Curtis wrote:
The cs-700 isn't full duplex is it?
Chris
Kb0wlf
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf
I am off to town in a few minuites. I will try a couple of shops on my
travels.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Eric Lemmon wrote:
Kevin,
Please advise the brand name of the key blank, and the key blank
identification number
will recognize it by appearance.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Scott Zimmerman wrote:
I am off to town in a few minuites. I will try a couple of shops on my
travels.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA
with.
Thanks,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Walt,
Try this link for a owner's manual:
http://www.rigpix.com/azden/pcs5000_manual.pdf
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
sjotrollet wrote:
Bit off more than I can chew (I'm a 160m CW ham). #2 son just passed
his Tech test and I foolishly
Fellows,
I'm on a quest for Minitor II tone filters(KLN7834) for a loal FD. I
have a request for CB(371.5) LB(822.2) tones. They'd like to have at
least 10 sets. PLEASE check your junk boxes and other stashes and let me
know what you have.
Thanks,
Scott
--
Scott Zimmerman
Amateur Radio
/
438.100 --UHF Port--
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Rick Szajkowski wrote:
dipexer
just like if you had 2 radios in you car
dual band radios have then built in
On Tue, Nov 3, 2009 at 9:11 AM, asterios sv2...@yahoo.com
Nope, That's not a Micor, it's a GE something or another (Delta??). If
you look closely at the wording under the upper part of the card, it
ends in 'ic.'
I had to go look for myself since I couldn't figure out how, or why one
would install a MSR2K exciter in a micor.
Scott Zimmerman
Amateur
Unless Mike looks like the @SS end of a Limo!!!
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Chuck Kelsey wrote:
Well, there's the problem ;-)
I was looking for a picture of Mike, not a picture of a car that Mike
took. LOL
Chuck
WB2EDV
guarantee you'll get even numbers of Tx/Rx, they'll be on the
same frequency, etc.; but you'll definitely get your money's worth!!
Just pay shipping and tell me how many you want.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
let the list know the *proper* name and how to get some.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Jeff DePolo wrote:
Speaking of tools, how about the specialized wrenches that
can take the SMA connector
nut loose on, oh, say, Yaesu VX 5 or FT-50's
The ones I was thinking of were a screwdriver type. They had a round tip
with two 'tits' sticking out. There was also a pin in the center to keep
the tool centered on the nut/jack assembly.
These were mostly used with 2.5mm and 3.5mm phono (headphone) jacks.
Scott
Scott Zimmerman
Amateur
I agree with Andy. Antennas are your friend.
Check this out:
http://www.freeantennas.com/projects/template2/index.html
This works with your existing router.
Good luck,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Andrew Seybold wrote:
Otherwise a second
around here that I'd be willing to sell for about
$20 each plus shipping. It would sure save you a lot of time and effort
troubleshooting and swapping out parts.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
ve2pf wrote:
Hi our club received a few month
This would be a 100W pull from a mobile. It's the same as used in a
station, but you would need to change the I/O connections to make it
work on a station heat sink.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
gervais wrote:
Scott
is this a 100 watts
Any handheld or mobile radio will work. A scanner would even be appropriate.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
kerinvale wrote:
Ill try that .which is ht you refer to
Thank You,
Ian Wells,
Kerinvale Comaudio,
361 Camboon
, it works OK enough.
You could always hook your HT to the I/O port and check sensitivity then
connect it to the duplex port and see if it's about the same. That's a
REAL easy benchmark.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
kerinvale wrote:
I
have been out in the sun too long or something. Maybe
Google is having trouble reading my mind... Yea, That's it!!
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Carmen J Peca wrote:
Hi All, I am in need of a Motorola Vibrasponder KLN 6209A Freq. 123.0
Hz. If anyone has one to sell please let me know.
Or if you can steer me in the right direction to try and locate one
James,
I have indeed (4) 162.2Hz KLN6209's here.
Send me a private e-mail and we'll bicker. HIHI
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
James Adkins wrote:
I also am in need of 4 of the 162.2 Hz vibrasponders. I have 4 203.5 Hz
if anyone
/audioprocessing.html
(This may be a bit over your head)[sorry Jeff]
http://www.repeater-builder.com/tech-info/fmtheorydiscussion.html
Sounded like a simple enough question didn't it!!
Enjoy,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
tait700 wrote:
Hello
to go from .1 header to a terminal block type
interface, you're on your own. I made an adapter board one time that
brought the pins out to terminal strips for easy connectivity.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
skipp025 wrote:
re: ACC
I have a good used one here. If anyone is interested, please reply direct.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Chris Curtis wrote:
ff-800 would be my choice if I had the money
http://www.rollanet.org/~joeh
chris
kb0wlf
-Original
have a solution using an adapter board and one of our AP-50 modules:
http://www.repeater-builder.com/products/ap-50.html
The AP-50 runs $50. The adapter board adds $10.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Laryn Lohman wrote:
I shoulda picked one up
you know
for sure. I am 98% I have (2) '13' split receiver sections. I'm not so sure
about the rest right now.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
- Original Message -
From: Chris Curtis demo...@rollanet.org
To: Repeater-Builder
in!!
See you all at the show,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
skipp025 wrote:
Re: It's almost time for that Semi Annual Bath
(I mean Dayton is almost here!)
The sights, sounds and smells of Dayton 2009 are
coming around the bend.
Those
THIS ENTIRE THREAD IS OUT OF LINE AND AGAINST LIST RULES!!
Per Kevin and my wishes, this topic is now closed. Any further
discussion by ANY parties will lead to people being banned from this
list. Understood??
Scott N3XCC - List co-owner
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett
All,
I am in need of some MII constant duty heatsinks. VHF 3 transistor
preferred, but not a requirement. They need not be in working order. All
I am looking for is the 1/2 thick plate, tinwork, and heatsink fins.
Please respond privately with your asking price.
Thanks,
Scott
Scott Zimmerman
If all you are wanting to add is a second receiver, take a look at this
simple 2ch voter:
http://www.repeater-builder.com/projects/wb2whc.html
While not as sophisticated as other voters, it doesn't carry their price tag
either.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Might this be the one:
http://www.concordmusicgroup.com/albums/Tchaikovsky-1812-Overture-Beethoven-Wellingtons-Vi/
Possibly Mike was confused which album it was on. I'm not sure if this one has
the cannons or not.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
, there are several available.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Mike Dietrich
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 09, 2009 6:11 PM
Subject: Re: [Repeater-Builder] (OT) Dynamic Range (WAS: APCO
.
If anyone is interested in pitching in, RB can get 4 spaces for use of list
members.
Let me know what you all want to do.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: n...@no6b.com
To: Repeater-Builder@yahoogroups.com
Sent
Eric,
Thanks for posting this. Now I have 3 card numbers I can look for.
Now if I could just find the cards.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Eric Lemmon wb6...@verizon.net
To: Repeater-Builder
Correct. This is the application we are planning on using it for.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Milt men...@pa.net
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, March 14, 2009 12:16 AM
Subject: Re
need, let me know.
Thanks,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
They *would* if it was me doing the job. This is for the county's radio
system, so I need to do it by the book. I mentioned about using some other
modules, but others involved were rather persistent that we use the right
cards.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Eric,
I'm not sure. I found (1) in my stash that I have collected at hamfests and
whatnot over the years. I have no idea what model numbers these would have
been found in. Knowing Motorola (and my dumb luck) there weren't very many
made.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474
that require a
'best educated guess' to 'try and get right the first time' are inevitable.
At least the crystal manufacturers have come a long way from grinding their
own crystals on a piece of emery cloth for their 40M rigs. (You old timers
KNOW what I'm talking about!!)
Scott
Scott Zimmerman
they
are loosing QUITE a bit of territory.
http://www.fcc.gov/mb/engineering/maps/images/callsigns/WTAE.gif
Sure would be nice to get it. Just looking for ideas and comments.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Laryn Lohman lar...@hotmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, February 17, 2009 9:18 PM
Subject: [Repeater-Builder] Re: Somewhat OT - an interesting antenna design
for
personal gain.
My comments were not meant to spur public discussion. They were merely my
own personal take on the situation. Let's get back to the issues at hand.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Laryn Lohman lar
, isn't this going to
be a self-correcting situation as time goes on. (Excuse the pun)
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Nathan Bailey n@live.com
To: Chuck Kelsey wb2...@roadrunner.com;
Repeater-Builder
- Repeater-Builder (The company)
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: lou_c1357 lou_c1...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Monday, February 09, 2009 11:11 AM
Subject: [Repeater-Builder] Looking for UHF Radios
there are several people on
this list that just love the MVP due to their size. (Hi Bob!!) I wonder if they
ever wished for the advantages of true FM for their MVP's.
Cost on these would be in the $100 range including donor PLL ICOM and AP-50.
Comments? Pre-orders? HIHI
Scott
Scott Zimmerman
Amateur
VoIP Ethernet links instead. I thought
it would be neat to use the old StarPoint stuff to link our amateur stuff
together as a backup.
Comments, discussions, et all are appreciated.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
in question, sorry. I would like to do a 2M
machine - 147.075+ and APRS - 144.39.
I realize I *could* just go to the site and look, but it's at about 3000'
and it's snowing like crazy right now. This is not to mention the ICE we had
the past two days.
Scott
Scott Zimmerman
Amateur Radio Call
I will tell you the reality is it is mounted securely at that angle.
It's mounted at that angle so the rat crap falls off!! HIHI
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
in mind.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Chuck Kelsey wb2...@roadrunner.com
To: Repeater-Builder@yahoogroups.com
Sent: Friday, December 19, 2008 4:46 PM
Subject: Re: [Repeater-Builder] Teledyne relays
Try Rick
Jordan,
The RLC-MOT works very well since it is an exact copy of the squelch circuit
found in the Micor. The only problem is it is now VERY expensive.
Kevin had done some extensive testing on the dual squelch modues some time
ago. Maybe he can chime in here... Kev??
Scott
Scott Zimmerman
Skipp,
I have a UHF I'd loan you. You can't have it though!! HIHI
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: skipp025 skipp...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Friday, December 19, 2008 12:50 PM
Next, the brass tube helical resonators in your assembly look to me to be as
made by ACS / Kendecom and as used in their repeater receivers.
Yep they LOOK like them, but the're not. This is a typical looking GLB
preselector preamp.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett
on
Friday. (Got nothing but voice mail)
A blown up '8920 input module would work too. I'm not above transplanting
parts from a donor board.
BTW: When it says 200mW max on the antenna and duplex ports - IT MEANS IT!!!
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA
.
By doing this, your throughput goes down, but you are helping your fellow
hams by only using 5 or 10 MHz instead of the whole available band.
For more on the available bandwidth options and such, check out of this
page:
http://www.qsl.net/kb9mwr/projects/wireless/allocations.html
Scott
Scott
for you.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Mike Mullarkey
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, November 22, 2008 11:57 AM
Subject: [Repeater-Builder] VoIP Phone Service
I am wanting
of
experience, check out this link:
www.repeater-builder.com/custombuilt
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: John Transue
To: Repeater-Builder@yahoogroups.com
Sent: Friday, November 21, 2008 10:19 AM
Subject
I am guessing he is probably trying to restore one to OEM condition
Great gift idea for the elmer that got you started in amateur radio!!
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Adam Vazquez Kb2Jpd
For the hobbyists that make their own PCB's, here is a good CHEAP PCB etchant.
http://www.instructables.com/id/Stop-using-Ferric-Chloride-etchant!--A-better-etc/
I just made some and tried it. It really works great.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA
and
unlock the locks so we could loosen the nuts. It was almost impossible to
get the nuts loose without disabling the locks.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Jacob Suter [EMAIL PROTECTED]
To: Repeater-Builder
-world was around
$100 or so.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Mung Bungholio
To: Repeater-Builder@yahoogroups.com
Sent: Monday, October 27, 2008 10:40 AM
Subject: RE: [Repeater-Builder] Duplexers
Kenny,
I have a whole stack of 45W UHF mastr II's with channel guard installed. How
many of them are you looking for?
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: K [EMAIL PROTECTED]
To: Repeater Builder Repeater-Builder
back on when the battery voltage recovers.
Of course, this could be tailored to taste.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Al Wolfe [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, October 21
. I have used no-ox in the past, but Cool-amps's
Conducto-Lube might be a better choice. I have had no experience with it.
Good luck,
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
- Original Message -
From: Kevin Custer [EMAIL PROTECTED]
To: Repeater
has crapped since the last
time I used it. (over a year!!)
Mike,
I have photocopied what I have and you are more than welcome to it if you
send me an address. Please send it off-list though (Don't want to give the
ham stalkers anything to go on!! HIHI)
Scott
Scott Zimmerman
Amateur Radio Call
Mike,
I *think* I have at least part of a manual in the shop. I can look for it
and let you know my findings tomorrow.
(Some things have not made the move yet. These manuals are among the not
moved pile)
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
1 - 100 of 243 matches
Mail list logo