did a check of the one I have (new) it is a TPN-1105A that has the battery
hook up for a Micro repeater 75 watt model
John
- Original Message -
From: Neil McKie [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, April 27, 2005 8:55 AM
Subject: Re:
I have about 4 to 6 of the 39 and happy with them.
I have never had a book on them but if you use the 38 book it will help you.
the rest will be on the display.
I have a number 38 I would like to trade for the 39
John
- Original Message -
From: rel60411 [EMAIL PROTECTED]
To:
comm port just for programing only
- Original Message -
From: rabremer [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 29, 2005 1:16 AM
Subject: [Repeater-Builder] Help on Zetron 45
Hi Gang
Any body know a way to have the Zetron 45 send its call sign
well the TKR-740K should do 146 to 162
K2 should do 158 to 174
K3 should do 136 to 150
all above are RX
all do TX 136 TO 174
John all above out of service manual
- Original Message -
From: kg6kjd
FYI 462.155 is not a
channel in the FCC list for use in the US.
- Original Message -
From:
N9WYS
To: Repeater-Builder@yahoogroups.com
Sent: Friday, May 06, 2005 8:01 PM
Subject: [Repeater-Builder] TKR-820 and
the Kenwood KPT-20 Programmer
Well,
we have ordered lots crystals from Bomar and they always work and with out
problems. Just need to understand the price. Good is not always cheep.
John
- Original Message -
From: Mark Boden [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, May 10, 2005 2:52 PM
did you send they the order in writing?
I have never ordered without a fax and it has always been correct.
- Original Message -
From: Coy Hilton [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, May 12, 2005 6:42 PM
Subject: [Repeater-Builder] Re: Caution on Bomar
come to think of it I also have an 800 fax number for Bomar.
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, May 12, 2005 7:34 PM
Subject: Re: [Repeater-Builder] Re: Caution on Bomar Crystals
I beleive ICM will send you an order
havent had to change any compensation caps,
just stick the rock in the ICOM and diddle the center frequency, The
latest set drifted 800Hz over 6 months, and I recentered it and it has
been on ever sence.
On 5/12/05, Maire-Radios [EMAIL PROTECTED] wrote:
did you send they the order in writing
I don't know what state you are in but, Florida is doing a big overhaul of
the Med Freg and getting ALL the health care people back on them. They have
switched them all to 12.5 freg's. with a plan on what PL tone they must
use. Just had on center install a Vertex VXR-7000 with a 2nd one on
At one time they did go to trucking here and now they are going back to the
Med freg's. I think it has to do with all the storms we have here in
Florida
and to move help into areas and to be able to talk.
I know when they did the trucking it just did not work.
- Original Message -
not sure how it will
do, but I need to do the same in the near further. any thoughts or
actions here?
If not will advise as soon
as we try it.
thanks
John
- Original Message -
From:
[EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, May 24,
you would do better with a DB antenna. better unit and longer life.
- Original Message -
From: Jeff [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, May 24, 2005 9:48 PM
Subject: [Repeater-Builder] I need professional help
I am looking for a competent insured
we are going to use a
Kenwood TKR-740 with amplifier. It is a high end repeater like the one's
we use on UHF(TKR-840) for some time with no problems. If you like I
will let you know how it works out.
John
- Original Message -
From:
BOB UNICK
To:
Get with Bob at TX RX and they can build you a duplexer to do the 462.550 to
462.725 with no problem
John
- Original Message -
From: robertakelseyjr [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, June 04, 2005 1:18 PM
Subject: [Repeater-Builder] Mixed messages
I sold one (work) last year for $50. just to get it out of my way.
- Original Message -
From: Q [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, June 08, 2005 5:48 PM
Subject: Re: [Repeater-Builder] Small Signals
Gee,you can usually find an old Cushman for
- Original Message -
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, June 08, 2005 8:31 PM
Subject: TPL Amplifier
I have a TPL
amplifier repeater grade rack mount.
UHF 5 watts in
100 watts. Had the ASTRON power supply lock up the other day
and put out 15 volts + did
guess I will try to make it to the tower in the AM.
thanks John
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, June 08, 2005 9:40 PM
Subject: Re: [Repeater-Builder] Fw: TPL Amplifier
John,
Without knowing the model
has anyone out there got a Micor repeater PA UHF 75 watt, installed with a
non Motorola repeater? if so what do you do with the yellow control wire?
I know you can not have more that 2 watts in. Do you know what the lowest
power it takes to drive the amplifier?
thanks John
- Original
can be hooked
to a variable supply, between 5 and 12 volts to adjust the power output.
lance N2HBA
- Original Message -
From: Maire-Radios [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, June 08, 2005 11:16 PM
Subject: Re: [Repeater-Builder] Fw: TPL Amplifier
Maire-Radios wrote:
- Original Message -
To: Repeater-Builder@yahoogroups.com
mailto:Repeater-Builder@yahoogroups.com
Sent: Wednesday, June 08, 2005 8:31 PM
Subject: TPL Amplifier
I have a TPL amplifier repeater grade rack mount.
UHF 5 watts in 100 watts. Had the ASTRON
I have sold a number of them also.. I for GMRS use and 2 for a local
hospital for there MED channels. So far no problems. Also have a number of
Kenwood TKR-840 out there with no problems.
John
- Original Message -
From: Warren Beaulé [EMAIL PROTECTED]
To:
got a Kenwood part number? (don't have a 820 book sorry)
- Original Message -
From: drwoolweaver [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, June 16, 2005 12:05 AM
Subject: [Repeater-Builder] TKR820
Does anyone have a source of the special molex plug for
get yourself a used traffic controller cabinet, low cost and mount it on
the outside. it is an outdoor locking box.
- Original Message -
From: Chris [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, June 17, 2005 10:40 PM
Subject: [Repeater-Builder] Water Tower
sounds like a sticking relay
- Original Message -
From: Loren James [EMAIL PROTECTED]
To: repeater builder Repeater-Builder@yahoogroups.com
Sent: Friday, June 17, 2005 10:35 PM
Subject: [Repeater-Builder] base station power supply
I have a GE base station supply with battery back up
get a current relay and a delay one. when the current relay see the TX
current and the delay will hold it off some (as set)
- Original Message -
From: mdnosliw [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, June 18, 2005 4:47 AM
Subject: [Repeater-Builder]
does any have a web site I
can look up the amateur freg's in Tennessee?
thank
you
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of
when you order the tkr-750 and tkr-850 there is a line item to have the
factory tune them for the freg. needed. I know you may think it is a waste
but on all the units I have order I have always taken them up on it. Now
for the tkr-740 and tkr-840 there is no item on the price list I have
east Tennessee around
Gatlinburg also looking for GMRS repeaters thanks
- Original Message -
From:
Jamey Wright
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, June 21, 2005 10:25
PM
Subject: RE: [Repeater-Builder] info
freg
TX RX is a fine company very good products
- Original Message -
From: Kevin Natalia [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, June 21, 2005 11:00 PM
Subject: Re: [Repeater-Builder] Multiband antennas
This is my second attempt, first one was sent, but did
does any have a link with I
can see the spec.'s on a Motorola MRT-2000 repeater or it may be MTR-2000
have not been to the site in some time to check thank you
John
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from
- Original Message -
From: Maire-Radios [EMAIL PROTECTED]
Sent: Sunday, July 03, 2005 6:59 PM
Subject: for sale item
I have a number of new old stock Maxon SP-2850 HT 4 channel UHF 4 watt
never out of the box units (5) also rapid chargers for the above radio's
(10) and one
Sent: Monday, July
04, 2005 12:18 AM
Subject: LTR UHF
for sale new old stock EF
Johnson 9841 new in boxes. part number 242-9841-232 UHF
450 to 470 LTR or will work convential new power cable and
microphone all mountings
$200 each 8
units available new in boxes.
thanks
John
sorry was not
thinking just trying to clean house
it was just like the guy
last week was asking for a duplexer and I gave him one at no charge. just
trying to help each other.
sorry
- Original Message -
From:
Mike Mullarkey
To: Repeater-Builder@yahoogroups.com
where in Florida are
you?
John
- Original Message -
From:
K4SLB Steve Butler
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 20, 2005 4:38
PM
Subject: Re: [Repeater-Builder] Looking
for Motorola Radius R100 Service Manual
It would be
;
Are you in Florida?
- Original Message -
From: Maire-Radios
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 20, 2005 5:39 PM
Subject: Re: [Repeater-Builder] Looking for
Motorola Radius R100 Service Manual
where
Subject:
receiver
on 2 meter band if the
receiver is .30 or .35 do you think we could tell on the operation range
on the receive?
thanks
john
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this group, send
that is the thought.
thanks and other thoughts?
- Original Message -
From:
Tony
lelieveld
To: Repeater-Builder@yahoogroups.com
Sent: Friday, July 22, 2005 10:44
PM
Subject: RE: [Repeater-Builder] Fw:
receiver
John,
If I think that what
you
does any have the link to the specs. on the Quantar repeaters?
thanks John
- Original Message -
From: ANTHONY [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, July 22, 2005 4:19 PM
Subject: [Repeater-Builder] Question Motorola Quantar VHF ?
Has anybody in this
are all your Freg licensed
for 2 watts or some for higher power I don't have my list to see if any of
them are above that? Are they all 12.5 channels?
Are any of they set up for
25k?
thanks
- Original Message -
From:
[EMAIL PROTECTED]
To:
what about the 25 watts in
the 3rd one?
Look at the Kenwood
TKR-840 a high end repeater but worth the cost
- Original Message -
From:
[EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, August 14, 2005 5:34
PM
Subject: Re:
what kind of units?
- Original Message -
From: Kris Kirby [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, August 14, 2005 6:24 PM
Subject: Re: [Repeater-Builder] REPEATER INTERMOD
On Sun, 14 Aug 2005, [EMAIL PROTECTED] wrote:
I wish I could change the pl tone,
Sent: Sunday, August
21, 2005 1:06 PM
Subject: zetron 39-max
any know how to default the
unit (Zetron 39-max ver 1.3)
or password as I
forgot the code I used and need to get into programming.
thanks john
YAHOO! GROUPS LINKS
Visit your group
Well the only problem I have with
selling Software and cables, is that a numbers of years ago there were a number
of guys that were hams here in the area that would program radio's on
anything. Some they sold and some they just used for them self.
There was business, ham, police and other
Yes you need to keep that in mind. I know the bolts that are on my tower
came with grade 5. keep that in mine. I don't know if SS comes in grade 5.
- Original Message -
From: Joe [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, August 24, 2005 7:57 AM
Subject:
still seeing some get 25k freg.(wide) just had a office center get one in
the 451.xxx area. So I think they are still out there.
- Original Message -
From: cdoe333 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, August 25, 2005 1:28 AM
Subject:
well I did the same as you only on a UHF unit had a guy sell it to me as a
repeater and it was a base. It took some work but got it to work. One of
the things in the UHF unit are all the filters on the receiver interconnect
board. The other do you have a station control card? the last
we have a number of the Micor repeaters that were in the 470 band and we
moved them down to the 463.xxxthey are working they are the 10 watt
units and have had them on the air for a number of years there were some
work to get them to receive ok but that was the main problem. don't
are you going to use it for HAM or business channels?
- Original Message -
From: ctool1968 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, November 16, 2005 8:48 PM
Subject: [Repeater-Builder] mobile repeater
it sounds like the type of thing I want is not
have a lot of 127.3 if needed.
- Original Message -
From: skipp025 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, November 23, 2005 12:32 PM
Subject: [Repeater-Builder] tone reed sources
I call three different locations to find tone reeds.
First, MDM
well for crystals we use Bomar
tools Tesco has a set they sell that has about 4 to 6 in a setthey
always have worked for us.
- Original Message -
From: Ronnie Steve Rice [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, November 30, 2005 8:26 AM
Subject:
well here in Florida (Tampa
Bay area) all the stores in the malls don't sell parts anymore, only
stores with parts are the ones in strip centers. There thought is no one
comes to the mall for parts and I would bet it is also the cost of rents on the
malls. They need a faster turn over to
there is the PL units and the DPL units you can not mix them. and only
one tone per repeater. also you don't need the rib.
- Original Message -
From: Coy Hilton [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, December 02, 2005 7:00 PM
Subject:
and where are you at?
- Original Message -
From: Captainlance [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, December 06, 2005 9:04 PM
Subject: Re: [Repeater-Builder] shipping suggestion
Hello.
I am looking for Motorola Micor base/repeater cabinet doors, both
Yes Bomar we have used they for years and are very happy. Would do they
again. And you get what you pay for.
- Original Message -
From: Ronnie Steve Rice [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 10, 2005 7:22 AM
Subject: [Repeater-Builder] Re:
are these for UHF units or VHF?
thanks john
- Original Message -
From: Bob M. [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, December 11, 2005 7:52 PM
Subject: Re: [Repeater-Builder] Vibrasponder wanted:
While I don't have the reed freq you're looking for, I
being a Vertex dealer, at this time there is not a factory program
available in the US that will let you program the VXR-7000UD into the 440
ham band. If there is anyone on the board that has a fix that works please
let me know. At one time about 2 years+ ago I talked to a person that said
this from Vertex since You are an approved dealer
for this equipement.
regards,
---per
At 02:32 16.12.2005, Maire-Radios wrote:
being a Vertex dealer, at this time there is not a factory program
available in the US that will let you program the VXR-7000UD into the 440
ham band
got a UHF amp from them about 2 years ago. was to be 150 watts output with
5 watts in.
gave them all the info ever the freg we wanted it tuned to.
when it came in is put out 134 to 137 watts with the 5 watts in.
called a number of time but no call back.
not sure if they still make product.
how do you get a vanity call sign? could you please give me a little info?
thanks
- Original Message -
From: N9WYS [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, December 20, 2005 7:17 PM
Subject: RE: [Repeater-Builder] Vanity call resumes
They discontinued
had some here in Florida would sell the silver non plated ant as BW the
gold ones were for color so when you went in the area you know who had the
color TV.
good sales campaign
- Original Message -
From: Ken Arck [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday,
there is a number of chips and caps. but it can be done. less work to go
from DPL to pl.
or is it is dpl add a tone panel.
- Original Message -
From: Dakota Summerhawk [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, December 22, 2005 10:54 PM
Subject:
does anyone have the list of
tome codes that are in most family radio's?
thank you and have a Merry
Christmas
john
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
thank you
- Original Message -
From:
R. K.
Brumback
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, December 24, 2005 3:37
PM
Subject: RE: [Repeater-Builder] tome
codes
I think different
manufacturers use different codes for different
also clean the pins and unplug all the cards and reseat them again.
good luck
- Original Message -
From: Stephen Rice [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Cc: [EMAIL PROTECTED]
Sent: Thursday, January 05, 2006 4:53 PM
Subject: Re: [Repeater-Builder] Motorola Mobile
what state are you in?
- Original Message -
From: Paul Finch [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, January 12, 2006 12:13 AM
Subject: [Repeater-Builder] OT - NOW NOT SO funny interference story
Hello again,
I am working on a weird interference
well I got a tkr-850 with the 210 and it has been working with no problems.
love it it is real nice. also in the service book from Kenwood they show
the hook up of a Zetron 38 tome panel to the 850 and it used the tone panel
for encode and decode.
- Original Message -
From: Ken
had a number of them shipped to me by truck and they were all in PVC pipes.
and the price was not to bad.
- Original Message -
From: Bob M. [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 13, 2006 7:20 PM
Subject: [Repeater-Builder] Shipping an antenna
I
there is a light weight PVC for water drains that is part foam also.
- Original Message -
From: Robin Midgett [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 13, 2006 7:48 PM
Subject: Re: [Repeater-Builder] Shipping an antenna
Yes, I have shipped such
have used Delta Dash to do the same also.
- Original Message -
From: wa6rqd [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 13, 2006 9:26 PM
Subject: Re: [Repeater-Builder] Shipping an antenna
Bob M. wrote:
I need to get a 10 foot long fiberglass antenna
all the one's I have 2 terminals on the back of the power supply for the
battery and power in. they will also charge the battery
I have lots of parts if you need any but all my units are UHF
- Original Message -
From: Steven Passmore, kf6fkk [EMAIL PROTECTED]
To:
well for GMRS you need to have one listed for type 95 use and to get that
you need to buy one. get your cash out as you can do it for 300 to 400$
and it will be yours. simple and it is a done deal
and yes I also did it, in Florida
[EMAIL PROTECTED]
- Original Message -
From:
just got a copy of it from Johnson it was under 200.00
- Original Message -
From: Juan Tellez [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, January 31, 2006 8:20 PM
Subject: [Repeater-Builder] Johnson Viking VX Repeater
Looking for the 2004pgm2.exe file for
DB-420 is my
bet
- Original Message -
From:
Dakota
Summerhawk
To: [EMAIL PROTECTED]
; [EMAIL PROTECTED]
; Repeater-Builder@yahoogroups.com
Sent: Sunday, February 05, 2006 4:12
PM
Subject: [Repeater-Builder] Need
suggestions for 460 repeater antenna
three miles? the guy should get it.
- Original Message -
From: Ray Brown [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, February 12, 2006 6:21 PM
Subject: Re: [Repeater-Builder] UHF Power
- Original Message -
From: Paul Yonge [EMAIL PROTECTED]
The
Volt-com they also have another name but it is still them.
1-800-USA-MAKE
We have 6 in service for a number of years and have never had to do anything
to them. Very happy with them.
Maire Communications
Florida
- Original Message -
From: Bob M. [EMAIL PROTECTED]
To:
have had more problems with the TPL amps and lighting and they have gone
back for more repairs than the Crescend/Volt-com units. Also have one TE
but when ordered it was to be 150 watts out with 5 watts in. on freg 460.xxx
got the amp it max is 137 watts and never could get 150 watts out.
Does anyone out there us a DB-228 antenna for there 2 meter
repeater?
If so how do you like the
way it works? Could you sent me some info about your set
up?
Anyone have a link to a
spec. sheet?
thanks
John
YAHOO! GROUPS LINKS
Visit your group
the GR-500 I have has two mobiles in it and a rick also.
- Original Message -
From: Eric Lemmon [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, February 18, 2006 10:24 PM
Subject: [Repeater-Builder] GR500 vs. GR300
Rod,
The GR300 is a completely different
and where are you
at??
- Original Message -
From:
Dakota
Summerhawk
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, February 19, 2006 10:45
AM
Subject: [Repeater-Builder] Need help
getting repeater programmed and tuned
Morning
all,
the GR-500 is the case that houses the repeater. you can put in different
repeater/radio's in it to make up a system.
are you doing 2 meters or 70 cm with the repeater you are looking for?
thanks John
- Original Message -
From: Ellen Engle [EMAIL PROTECTED]
To:
Sounds like a UHF repeater as the Motorola stock duplixer for VHF will not
do 2 meter and not fit into the GR-500 setup.
- Original Message -
From: kf6mxk [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, February 19, 2006 1:26 PM
Subject: Re: [Repeater-Builder]
Well my good man They are right. We can not even put a phone dialer in
an elevator room even when it does service the elevator the room is for. We
have had to move fire alarm panels and access control panels out of elevator
rooms. Now if you can build a wall to have your equipment in a
most of the rules are in
state codes, I know for sure in Floridait is in there codes and I'm
sure most states just copy them also. Call the state and find out what
dept covers elevator inspections and get themto fax you a copy of the
rule, Florida has always been happy to do that when we
Tuesday, February 28, 2006 6:20 PM
Subject: Re: [MotorolaR100Repeater] Fw: [Repeater-Builder] motorola r100
rptr
The hang-time on a R100 is determined by JU12 and resistors R922, R923 and
R924. All these parts are found on the Control Board which is in the lid
of the repeater.
2 sec
Steve what city in Florida are you in? I'm in Clearwater.
Also I think his thought was you can not spend enough on lighting
arrestors. been there and still doing that. buy good cause it really does
count.
John
- Original Message -
From: Stephen Rice [EMAIL PROTECTED]
To:
Seen some before like that for internet access. Maybe the same there.
- Original Message -
From: Ron [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, March 30, 2006 5:33 PM
Subject: [Repeater-Builder] New addition to tower site - WHat is it?
Top of the
Well I have a new in the box
unit and a number of them on repeaters. Have some paper work around here
someplace will look for it over the weekend and if found will pass the info
on.
I know there is a pot you
adjust it about 2 volts above the battery to keep it charged but it is done as
we have a 150 to 160 one on 2 meters and the coverage is not as good as it
could be.
- Original Message -
From: Chappy [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 07, 2006 12:06 AM
Subject: [Repeater-Builder] DB-224 versions
We plan to buy a new
what kind of repeater is
it?
- Original Message -
From:
NonProfit Radio
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 06, 2006 7:18
PM
Subject: [Repeater-Builder] Connecting a
repeater to a PBX
I am looking for a low end method (aka cheap
what freg are you on?
tone code?
thanks
John
- Original Message -
From:
NonProfit Radio
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 07, 2006 4:42
PM
Subject: Re: [Repeater-Builder]
Connecting a repeater to a PBX
Thanks for all the ideas so
what freg are you on?
tone code?
thanks
John
You can sent the info to me
direct
[EMAIL PROTECTED]
you- Original Message -
From:
NonProfit Radio
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 07, 2006 4:42
PM
Subject: Re: [Repeater-Builder]
think I have a phone patch
for the Ritron repeater
send me your Email
address I need more info.
John
- Original Message -
From:
NonProfit Radio
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, April 08, 2006 8:03
AM
Subject: Re: [Repeater-Builder]
got a friend that has one on 444.3xx and 449.3xx receive and has had no
problems. has had it that way for many years and it is on a 150' tower.
also I don't think we want to go to Kathy and Cook after last year's story
for day on the antenna. A short time ago Tessco had some. Not sure if
FYI Elk makes there products for alarm systems.
We uses they a lot and have had very good luck with them. We get them from
our alarm system supply co.
If you can't get them let me know and we can get them for you or call the
company that does your alarm work I'm sure they could also get them
ok list price is $35.00 I could get them and sell them for $22.11 each and
$4.23 for shipping total $26.34
if you are in Florida I also need to get sales tax.
thanks John
- Original Message -
From: skipp025 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April
should be a pin out but may need to
change a juniper.\
- Original Message -
From:
[EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 28, 2006 12:53
PM
Subject: [Repeater-Builder] FLAT AUDIO --
GM300 / MAXTRAC
Hi all!
Maybe
as info I got from the factory NO. never been set up for that.
- Original Message -
From: ochf13 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, May 06, 2006 12:14 AM
Subject: [Repeater-Builder] Newer IC-FR3000 program in the HAM Bands?
Hello,
Will the
I have one(Bridgecom) VHF unit here I ordered for a person in Dec 2005 or
Jan of this year I would sell for $900. with shipping cost. It will come
programmed on your freg. and also will come with the programming software
and cable.
thanks John
- Original Message -
From: Dick
Well that is the same feelings I have had for many years.
5 Micro repeaters
3 R-100 repeaters
3 Kenwood TKR-840
1 Kenwood TKR-850
All true repeaters, no problems all on the air working each day.
- Original Message -
From: Lee Williams [EMAIL PROTECTED]
To:
1 - 100 of 326 matches
Mail list logo
