Hi All,
I only joined a couple of days ago, so by way of introduction...I have been
involved, and have involved my family and their animals, with EICS for several
years. I personally ingest a quantity of ICS every morning as a, 'daily
maintenance program', using my own equipment and methods,
They are laying the current to those electrodes letting them pull as
much current as they will at full power supply voltage.
Not current controlled at around 1 milliamp per square inch of electrode,
but with a maximum current limit somewhere around 20 milliamps to prevent
fires if the
How pure is chemical soup of your body?
How pure is the air?
Unless that .9% is Ricin toxin. I'd not worry about it.
Ode
At 12:48 PM 8/28/2008 +, you wrote:
Hello Group, Went to the local Tractor Supply store and bought a pint of
DMSO that is only 99% pure. Can I still use this in my
but how do you do that Steve? My normal batch takes about eight hours
to make which is using a silverpuppy and a quart size container. My DW
is really pure (000) on the TDS meter. The finished article measures
either 7 or 8 on the TDS meter so I thought this was approximately 14 to
16ppm.
Hi Dee,
I must say, I had to check twice to be sure that wasy Wayne making that
posting and not Ken! GRIN
Since the 'puppy will do the auto-shut-off thing, my suggestion is to
cycle the thing twice a day and be done with it... Morning and bedtime,
decant, re-fill, push the button and leave
Good Morning Dee,
At 03:56 AM 8/29/2008, you wrote:
dee PS sorry if I haven't understood your very detailed analysis,
but I'm afraid I need a lay persons version - not being very up on
the science of it all.
I read all the replies and statements relative to your questions
and possible
Hi Neville -- welcome to the group. Yes, you are correct -- you should just jump in with any remarks and/or questions on your mind. Am I correct in my assumption that you're located in England? MA
-- Original message from "Neville" nevillem...@bigpond.com: --
Hi
Everyone will be delighted to answer any questions you may have Neville,
and welcome to the list. dee
Neville wrote:
Hi All,
I only joined a couple of days ago, so by way of introduction...I have
been involved, and have involved my family and their animals, with
EICS for several years. I
thanks for the reply Wayne, but I have to say that if I had read this
before buying a generator, then quite frankly, I wouldn't have
bothered! To say that this puts an even more complicated slant on
things would be an understatement I think. I will just stick to letting
the SP do it all for
Hi Dee. I'm in the same position as you -- I'm not engineeringly savvy, and I don't want to be. I also have a demanding lifestyle, and don't have time to fool around with all this stufff. I just want to make CS so I don't have to buy it. I just wanted to reply to one thing though -- you
Dee
To a large extent I am like Wayne. I just can't make CS without a meter to
measure voltage and current. However, unlike Wane I would supplement my DIY rig
with a commercial unit. There are times when I would like the Fire and Forget
operation of a commercial unit. From what I have read on
Wayne,
You're not that blue guy, are you?...
Dan
-Original Message-
From: Wayne Fugitt [mailto:cwa...@netdoor.com]
Sent: Friday, August 29, 2008 7:04 AM
To: silver-list@eskimo.com
Subject: CSRule of Thumb, doe not get it, Who wrote the
rules anyway ?
Good Morning Dee,
At
Sorry to add to your inbox to correct my original typos but one
correction is needed to make sense. I sent the original post via
Blackberry and my bad vision doesn't let me proofread very well. Changes
in bold
Dee
To a large extent I am like Wayne. I just can't make CS without a meter
to
A warm Thank You to those who gave words of encouragement by way of welcome.
In answer to the question relating to my residing in England...No, I'm afraid
not, I am a few thousand kilometers south-east...Australia, Thanks for asking
though as I forgot to mention that.
It was not my intention
Good Morning Dan,
At 09:24 AM 8/29/2008, you wrote:
Wayne,
You're not that blue guy, are you?...
No, He lives just down the street.
I taught him how to make CS.
He was a little pale, and I though he needed to be a different color.
So, I altered a few things, hoping to turn him
MA, I think Neville might be from down under, which would mean he is tucked
up in bed right now (unless he works nights) and won't be around for a few
hours yet!
R
Hi Neville -- welcome to the group. Yes, you are correct -- you should just
jump in with any remarks and/or questions on your
Oh. Oops. Neville is a night bird! Or he lives in the West!
R
Good night, Neville, race you to Dreamland!
I am a few thousand kilometers south-east...Australia,
MA, I think Neville might be from down under, which would mean he is tucked
up in bed right now (unless he works nights) and
Ah, now this is the nub of what I have been trying to say! Well done MA
- you put it in a nutshell! Let me reiterate: if I try and speed things
up - by whatever method - I will probably compromise the CS - i.e. it
will not be such high quality as the stuff I am making which takes
longer. Is
Thank you for taking the trouble to reply in depth Steve, I do
appreciate it and I did actually understand most of what you say lol
I have decided to stick with the normal running time which seems to be
making good CS - unless of course, I'm pushed for time. Thanks to all
who offered help.
Don't worry Steve, I managed to understand what you meant anyway. I
think my understanding of English and grammar is probably a lot better
than my understanding of all things electric, physics, etc.,! dee
Norton, Steve wrote:
Sorry to add to your inbox to correct my original typos but one
If this has already been posted I missed it. If not, FYI:
http://www.silver-colloids.com/Papers/SilverNoThreat.pdf
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted at: http://silverlist.org
To post, address your message to:
OK -- see, you're trying to nail down something that is not nail-downable without a lot of complicating factors. It *may* not be as high quality, unless your bottle of water is higher quality than the last bottle, or some other mitigating factor,etc. That's what everyone is trying to say --
Not quite.
The manufacturers have set up their systems so that you get a repeatable
brew of CS. If you change any of the variables you risk changing the
CS. Whether this would be of lesser quality, to a degree that it
matters, is the question.
With the SilverPuppy, you have control over
Great article Steve, I've kept this in my file for future reference for
sceptics. dee
Norton, Steve wrote:
If this has already been posted I missed it. If not, FYI:
http://www.silver-colloids.com/Papers/SilverNoThreat.pdf
--
--
The Silver List is a moderated forum for discussing
I think I've got it now MA. dee
marmar...@bellsouth.net wrote:
OK -- see, you're trying to nail down something that is not
nail-downable without a lot of complicating factors. It *may* not be
as high quality, unless your bottle of water is higher quality than
the last bottle, or some other
Thanks Dave (sorry Mike) one thing about all this is, that it is
gradually giving me a better idea what the whole thing is about. I
don't think I will ever fully understand the intricacies of it all, but
at least I am getting a glimmer about some of the mechanics. I suppose
that's what it's
Evening MA,
At 08:45 AM 8/29/2008, you wrote:
-- you don't have to use part of the old batch to make a new one.
No one said you did.
You can if you want to, as it apparently speeds things up.
Is that hearsay evidence, speculation, or have you tried it ?
But as I understand it, that
Evening Neville.
There is no time limit, ... jump in when you are ready.
At 09:48 AM 8/29/2008, you wrote:
It was not my intention to participate as early as this but I can't
resist supporting the points 'wayne fugitt' made. I make my own
generators and they are not 'current limited'
I just love the idea of automatic. If the quantity/quality/color varies a
bit. I don't care as long as it works. I'm not sick, just using for
prevention and oral care. I'm going to make some up for my husband who has
knee problems which I believe is an infection of some sort. It responded
Ev
At 12:24 PM 8/29/2008, you wrote:
If the electrodes are not returned to the normal position before
shutoff, the brew will have a lower ionic content of silver (lower ppm).
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Instructions for unsubscribing are posted
Evening Dan,
I follow what you said, and do not disagree with anything,
At 12:24 PM 8/29/2008, you wrote:
If the electrodes are not returned to the normal position before
shutoff, the brew will have a lower ionic content of silver (lower ppm).
This part is interesting and offers some ideas
Steve,
You are right, of course, about the efficacy of CS based on particle.
However, Marshall Dudley has shown that adding a small amount of H2O2
to the CS *after* it is made, will cause any large agglomerated
particles to break up into very small particles.
I don't know why we don't just
Wayne -- try to keep up! The sentence that you quoted was in reply to Dee's remark that the one thing she had learned in all of the discourse, was that she needed to add some CS from a previous batch to the new batch. She doesn't. Dee's original question was: if she tries to speed up her
Me too, Barb -- automatic is great! I hope the CS helps your husband! MA
-- Original message from "B Magnatta" mom.magna...@gmail.com: --
I just love the idea of automatic.If the quantity/quality/color varies a bit. I don't care as long as it works. I'm
Afternoon Wayne,
Send me your picture.
I'll send you one of me...
Dan
-Original Message-
From: Wayne Fugitt [mailto:cwa...@netdoor.com]
Sent: Friday, August 29, 2008 10:05 AM
To: silver-list@eskimo.com
Subject: CSThe Blue Guy
Good Morning Dan,
At 09:24 AM 8/29/2008, you
Heck guys -- who don't you both send them to the list? Then we can all see what ya look like!! MA
-- Original message from "Dan Nave" dan.n...@nilfisk-advance.com: -- Afternoon Wayne, Send me your picture. I'll send you one of me... Dan-Original
It won't go thru the list,
and besides, it's kind of a quid pro quo sort of thing...
If you want to exchange your picture, let me know.
Dan
From: marmar...@bellsouth.net [mailto:marmar...@bellsouth.net]
Sent: Friday, August 29, 2008 3:18
I am interested in your educated thoughts regarding polarity reversal of
constant current DC being supplied to the electrodes. Specifically, how
would one optimize the frequency of polarity reversals, given brew the time
(and possibly the current), to minimize the buildup of crud on the
You may want to read this link generated by some outstanding experts in
colloidal silver:
http://silver-lightning.com/theory.html
From: SJY [mailto:you...@relia.net]
Sent: Friday, August 29, 2008 3:50 PM
To: Silver List
Subject: CSPolarity Reversal
I am
How long and to what temperature would you have to heat Canadian Maple Leaf
coins to get the silver back to soft silver. My understanding it is hard from
the stamping (working), silver gets hard from working it.
If I melt it and pour into a flat sheet would it be soft.
Maple Leaf coins are
I have a machine that reverses, I timed it at 1 minute between cycles.
SICK LEAVE / Bob
**It's only a deal if it's where you want to go. Find your travel
deal here.
(http://information.travel.aol.com/deals?ncid=aoltrv000547)
- Original Message -
From: Wayne Fugitt cwa...@netdoor.com
To: silver-list@eskimo.com
Sent: Saturday, August 30, 2008 4:45 AM
Subject: CSA Non Conformist, maybe... maybe not.
and associated circuits could be used. It could even have the stop watch
built in. ( or a timing
I have been discussing this 'crud' thing on another site. I don't believe it's
possible to eliminate buildup, minimise it maybe, but not eliminate it, so I
ask myself why try to eliminate it then, so at the moment I am looking into
ways of saving it and by using h2o2 I can collect it to make a
SJY wrote:
I am interested in your educated thoughts regarding polarity reversal
of constant current DC being supplied to the electrodes.
Specifically, how would one optimize the frequency of polarity
reversals, given brew the time (and possibly the current), to minimize
the buildup of
Dear Silver List
Comments
FYI
On using the power from the phone line.
There is a possibility that you could short out a home or work phone electrical
system using this approach. This especially true with older buildings or older
homes.
If your generator consists of basic (or simple)
Welcome to the group,
debbie :)
--- On Fri, 8/29/08, Neville nevillem...@bigpond.com wrote:
From: Neville nevillem...@bigpond.com
Subject: CSNew Member...
To: silver-list@eskimo.com
Date: Friday, August 29, 2008, 2:42 AM
Hi All,
I only joined a couple of days ago, so by way of
Evening Marshall,
At 07:16 PM 8/29/2008, you wrote:
The distance between the electrodes comes into play if there is
sufficient time for the ions to travel to the other electrode during
the cycle.
I can visualize that, ... I think.
Do you know the speed of the ions ?
Trying to
47 matches
Mail list logo