nds a bit, on the output of uname -m
arm5te* arm-x09/19
armv7/armhf arm-x41
TheMonkey wrote:
> Hello digimaster,
>
> I have read your post and I am more than interested setting up the new
> LMS 7.9.1 on my QNAP HS-210 :cool:. I went on your website and couldn't
> find any d
Luckly now you also give the logfile, so i could find the trouble.
Its the charset options, it seems you're QNap is missing the locales
environment variables.
At startup it uses the LANG varible to start LMS with the proper support
on you're QNap.
Thats missing in you're case, and thats very stra
Oke investigated you're trouble, its a strange one.
But think i found the difference between 2.03.00 and 2.03.03.
'Here is a link to a bugfix for testing it !' (http://bit.ly/2TSCOE7)
Install latest version 2.03.05
Go in to ssh, do [ cd /share/*/qpkg/LogitechMediaServer ]
Now [ ./QLogitechMediaS
Having another close look on the log, i have noticed that the messages
http://:9001 is missing some thing.
And ther eis no error regardin dig not found.
It seems there is no network connection.
Please go in ssh, do [ cd /share/*/.qpkg/LogitechMediaServer ]
Now do [ chroot .config/LMSROOT /usr/b
wjd wrote:
> I use a QNAP TS-439 Pro II+, QTS 4.2.6 (2018/12/27),
> QLogitechMediaServer 2.03.05
>
> log:
> [08:39:46 16-01-2019] Upgrading LogitechMediaServer to 7.9.2-1547616941,
> please wait !
> Your locale was detected as C, you may have problems with non-Latin
> filenames. Consider changi
jtudor wrote:
> I tried 2.03.05 - unfortunately I get the same error on startup, either
> at the command line or using the GUI:
>
> [admin@gravastar LogitechMediaServer]# ./QLogitechMediaServer.sh
> restart
> LogitechMediaServer was already stopped !
> The QLogitechMediaServer source, not mount
wjd wrote:
> What I am trying to say, is that I can ONLY start LMS using ssh.
> When I start LMS in qnap gui the logs states that LMS has started, but
> using ssh ./QLogitechMediaServer.sh status shows that LMS isn't running
> at all!
>
> It's annoying to have to start LMS in ssh every time, bec
Oke nice it works after the upgraded.
As i already wrote, some times a stop and start from the app center
needed when there is no webgui.
The error is regarding a missing command, but that's not a very
important one.
wjd wrote:
> After installation, in the app centre LMS seems to be running.
>
*
'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)
'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)
= QlogitechMediaServer version 2.03.05
= 13-01-2019
* Bugfix for th
*
Here are some tips and ways to do, when you run it to trouble with
QLogitechMediaServer and LMS !
When it seems QLogitechMediaServer start without any error, and after 5
minutes you still cant not access the webgui ( port 9001 is the default
)
Log-on to the webgui of you're QNap, and
wjd wrote:
> Restarting in App Centre doesnt work for me. I have to use
> Putty.command line.Oké strange, curious if after a reboot you can access the
> webgui. If not
let me know, then need some info from you're system.
Send from my mobile Phone
*
maintainer of QLogitechMediaServer, QOptw
I think I've found the problem. Will be fixed in the next release
2.03.04.
Gone be released soon, as a buffixs release.
Also work on new big release, where perl will be upgraded to version
5.26.3
And also the add cpan modules, which are included for spotty/Shairtunes
will be upgraded to latest
Yes that's strange.
No need to retry it.
Let's wait and see, what a next releases does. But strange it is.
jtudor wrote:
> I will try that. But if I re-install version 2.03.00 then it all works
> okay, so doesn't that mean it;s something that's changed in version
> 2.0.3.03 that's caused the pro
Investigated you're trouble.
But the data file is not corrupted.
The only thing i remember, i had a simular error with a other qpkg.
After investigation, a was due to that i had a Optware installed, and
tar used some off the comp libary's
So you could try again, after you disable any optware.
And
The messages
[12:19:33 11-01-2019] The QLogitechMediaServer source, not mounted !
Tells you, that the /share/*/.qpkg is not proper mounted on startup of
QLogitechMediaServer.
Try a restart of the QNap nas-system.
jtudor wrote:
> Hi there - I tried re-installing the latest version - 2.03.03 -
Oke thanks for the info, need to have a close look on it.
Strange as the x86/x86_64 works fine.
Nice to read the arm-x19 works on you 're Qnap Nas-system.
Because its a version, which i added last, and was hard to properly
test.
MrGAN wrote:
> Thank you so much for your support!
> I really enj
*
'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)
'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)
V. 2.03.03
= QlogitechMediaServer version 2.03.03
= 08-01-2019
Happ
Mostly happens after restart off the Qnap. Some to do with update off
app center. Think have solved it, in the middle off testing. If ready
Bugfix will be released. PugRallye wrote:
> A weird one today...
>
> Went to open the web UI for the Logitech Media Server using :9001
> and got the "unava
Oké strange, but got no idea. That's more some thing from the Qnap club
store. Gone ask them, about this. stoobie-doo wrote:
> Hmm... problems again with a TS-251, can't update from AppCenter; need
> to install manually to go from 2.03 to 2.03.01
Send from my mobile Phone
*
maintainer of QLog
*
No messages, seems to be running, but no webgui ;
Logon to you're QNap by ssh,
Now do
[ cd /share/*/.qpkg/LogitechMediaServer ]
[ ./QLogitechMediaServer.sh status ] ( Should tell if its running )
[ ./QLogitechMediaServer.sh restart ] ( Will restarted the services,
have a good look on the mes
*
For those of you, having trouble. And dont know what to do.
I try to explain them here !
Next time, will gone try and explain the .QLMS.conf file and options !
===
The big messages explanation.
On installation ;
( is not supported on this Q
Euh you gone tell, that he has failsafe active, why ?
=== take from slimserver.pl --help =
--failsafe => Don't load plugins
One uses this, when LMS wont start, or crashes.
In QLogitechMediaServer, this c
For those of you, how do a new installation, and having trouble.
Please restart you're QNap nas-system, and after it has been started
again, wait a while before trying to acces the webgui.
I believe it has something to do, with the way app center from QNap has
changed something regarding thirt pa
This messages comes, if one does . /QLogitechMediaServer.sh failsafe. Or
if in the LogitechMediaServer direcrory, there is a file .FAILSAFE or in
the .QLMS.conf there is a line FailSafe=1.digimaster wrote:
> Yes then it's started with the failsafe as option.
>
> Send from m
Yes then it's started with the failsafe as option. mherger wrote:
> > Failsafe mode active there will be no plugins load !
>
> Anybody knows where this is coming from? Could this be related to LMS'
> failsafe mode? That would explain why all plugins are inactive...
>
> --
>
> Michael
Send
Oké please go Logon to ssh, go to the LogitehMediaServer directory. Now
stop LMS by ./QLogitechMediaServer.sh stop. And then do rm -R
SlimServer/. Restart with ./QLogitechMediaServer.sh start. Let it do its
thing, when ready is complete clean new installation off LMS. And please
use nothing from t
You could di the same, by disabling it through the app center. And then
enable it again after a minute.
And yes some times on installation, it needs to be restarted to work
proper. Some thing I'm looking into to at the moment. PugRallye wrote:
> Aha.
>
> I used Putty to SSH onto the NAS, then
To help you, we need more information.
For example, how and with what did you do the installation ?
And where and how did you restore several things.
Once again, a simple thing to do is.
Logon to you're QNap by ssh shell.
Then do [ cd /share/*/.qpkg/LogitechMediaServer ]
Then do [ rm SlimServer/
Oké I read you are using QLogitechMediaServer. A question did you used
old settings from ssots/ssods? Or any other LMS installation?
A thing you could try, Logon by ssh and do CD
/share/*/.qpkg/LogitechMediaServer.
Then do rm SlimServer/.INSTALLED.
Now do ./QLogitechMediaServer.sh restart.
This w
Great some times, after first installation it seems to run, but needs a
restart to work.
On trouble always go to the LogitehMediaServer directory, and do .
/QLogitechMediaServer.sh status to check if it running. Otherwise have a
look on the log file with cat QLogitechMediaServer.log where it will
Oké then is running. A thing you could try, in the
.qpkg/LogitechMediaServer directory do ./QLogitechMediaServer.sh
restart. Wait until it ready, and gives you the line how to acces it.
Then after a few minutes, try that in Google Chrome. Remember some times
can takes some time. Depends a bit on h
Oké but QLogitechMediaServer, runs in runs LMS in chroot. So it's not
depending on any libraries or programs from Qnap QTS system. I build a
Filesystem based on Debian 9 stretch, and check on which libraries Lms
and plugin needs /calls to work proper. So don't compare
QLogitechMediaServer with oth
way, to be sure LMS is as pure as made. networx wrote:
> Hi Digimaster,
>
> as i understand QLMS is prepared for some plugins already. But i'm not
> able to activate some plugins. Material_Skin e.g. already showed active
> but can't be choosen for the front end in
??? I'm afraid can not follow what you are talking about. networx wrote:
> Dear all,
>
> there seems to be a plugin problem. Serveral plugins i tried won't work,
> so e.g. Youtube or Material Skin.
>
> Material Skin, will shown as active in plugins list but not even the
> folders under "Plugin
If you Logon by shh, then do CD
/share/*/.qpkg/LogitechMediaServer
Then you should be in the directory of the QLogitechMediaServer.
There do ./QLogitechMediaServer.sh status, this will tell you if lms is
running. BobW wrote:
> uname -m : *x86 -64*
>
> I am not a great linux specialist, but I t
Oké and if you Logon by ssh shell, and do uname -m. What's the output.
Also try in ssh shell CD /share/*/.qpkg/LogitehMediaServer. Now do
./QLogitechMediaServer.sh status. What's the output. BobW wrote:
> I have a SQB touch and a Duet. They worked fine with the version 7.9.1
> installed on my Qna
But still not clear, what you where using, and what has been upgraded?
digimaster wrote:
> What do you mean with version 9?
>
> Send from my mobile Phone
Send from my mobile Phone
*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.
Qnap TS-453a, with LogitechMediaSe
What do you mean with version 9? BobW wrote:
> My SQB was working all right with version9.1. Today installed on my
> QNAP (439 ProII, QTS 4.2.6) the recent version. Installation seems OK
> but can not open the LMS anymore.
> In Firefox I can not connect anymore to :9001 (:9000 is OK for my Twon
One thing I'm curious about, do you also uses spotty? frankef wrote:
> Thanks, digimaster! Your hints above did the trick, and I learned a bit
> about linux permissions and ssh. Happy New Year!
>
> --frank
Send from my mobile Phone
*
maintainer of QLogitechMediaServer
Nice to read it work. Especially that you use a arm5te, as that one of
the last archs which I added. So that's also out off beta. frankef wrote:
> Thanks, digimaster! Your hints above did the trick, and I learned a bit
> about linux permissions and ssh. Happy New Year!
>
> -
But still the big support comes from you're effort. So many thanks, so
we enough one of the best way of mutli room audio. [emoji106][emoji847]mherger
wrote:
> > Yes, thank you very much, Michael!
>
> I in turn would like to thank all the contributors who considerably help
>
> to keep this pro
As QLogitechMediaServer is running in chroot, the layout could feel
strange. But you be simular to the normal layout. When running go to the
LogitehMediaServer directory by ssh shell. Then browse to
.config/LMSROOT/share, and check the several directories there where
you're music can be found. fr
In the ssots/ssods there were lots of routines/process running in the
background. Where QLogitechMediaServer.sh only prepares, and uses a
regular build perl. And starts optimized by using ionice. jasell wrote:
> Thanks, there is always a faster way.
> At least Im starting to get a bit comfortabl
Oke you could also tried, ssh shell go to the LogitechMediaServer
directory.
And then rm SlimServer/.INSTALLED, and restart QLogitechMediaServer.
This will always do a fresh installation, set the owner and rights and
preserve the Cache and prefs.
I was just gone write you this option.
But see yo
Oke then the ts-x19 version should work.
The other thing its using is chroot.
So in ssh shekk do which chroot.
If it comes back with a error, it wont work!
frankef wrote:
> digimaster wrote:
> Depends on you're cpu. Could you tell me the output from uname -m?
>
> uname -m
Depends on you're cpu. Could you tell me the output from uname -m? frankef
wrote:
> Thank you, Digimaster, for your development efforts and your patience
> with all the problems and questions.
>
> I have a QNAP TS-212 (Marvell processor) running firmware 4.3.3. All the
&g
Oké that's strange, the installation is missing the chroot. Could you go
on the ssh shell. Then do CD /share/*/.qpkg/LogitehMediaServer. Then do
ls -l .config/, it should then show LMSROOT. jtudor wrote:
> I've just upgraded from 2.03 to 2.03.01 on a QNAP TS-677.
>
> Never had any problems befor
Oké great.
Then the needed zlib is already in the latest release.
Merry Christmas.
dolodobendan wrote:
> Sorry to disappoint: :cool:
>
> 26344
>
> Merry Christmas Everybody!
Send from my mobile Phone
*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.
Qnap TS-453a, with Logite
*'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)
'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)
= QlogitechMediaServer version 2.03.01
= 23-12-2018
* Changed some sm
I you're case won't work.
QLogitechMediaServer runs in chroot, so it has a special build
Filesystem. Where LogitehMediaServer is running in, so it's not using
anything deliverd or add to the QTS software. dolodobendan wrote:
> As I never pass a chance to being adventurous, I tried that.
> Unfort
*'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)
'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)
= QlogitechMediaServer version 2.03.01
= 23-12-2018
* Changed some sm
Be sure the music file have 0755 as permission. PugRallye wrote:
> Hi,
>
> I've been running LMS via SSOTS for years (TS-259 Pro+) and thought I'd
> upgrade using this.
>
> I installed the QKPG and now it seems like all my music, data etc has
> gone?
>
> It looks like the whole drive has been
steklo wrote:
> So as a whole it would be like this:
>
> First:
>
> [ cd /share/*/.qpkg/LogitechMediaServer ]
> [ rm -R SlimServer/ ]
> [ ./QLogitechMediaServer.sh start ]
> [ ./QLogitechMediaServer.sh stop ]
> [ rm -r SlimServer/Cache ], [ rm -r SlimServer/prefs ]
>
> Then:
>
> [ cp -RP /sha
steklo wrote:
> Hi digimaster,
>
> I tried to assemble the info you gave directly and those you linked me
> to would you mind looking over it to see if I got it right:
>
> First:
>
> [ cd /share/*/.qpkg/LogitechMediaServer ]
> [ rm -R SlimServer/ ]
> [ .
steklo wrote:
> Hi digimaster,
>
> yes I understand that these are the backups of the old installation
> which were created in step 1. But I guess that is where these backups
> are supposed to be in order to get copied into the new installation in
> step 2, right? But as it s
yeomanspc wrote:
> Hi Digimaster,
> Everything was running well, but then I implemented Advanced Folder
> Permissions (ability to have different accesses to folders below the
> share level), and a few things stopped working (like not being able to
> play any music). I
steklo wrote:
> The folders "Cache" and "prefs" (which were created in the very first
> steps) are located in "Multimedia" I think this is where they are
> supposed to be, isn't it?The prefs and Cache in the Multimedia directory,
> should a backup of a
other installation. The proper place for
steklo wrote:
> Thanks again!
>
> All commands seem to work now:
>
>
> Stopping QLogitechMediaServer [13043] in the Background.
> SlimServer/Cache/
> cp -r /share/Multimedia/prefs SlimServer/prefs
>
>
> QLogitechMediaServer was already stopped !
> QLogitechMediaServer is started in
steklo wrote:
> Great! That worked.
>
> Unfortunately the next step seems to fail:
>
> ./QLogitechMediaServer.sh stop
> Stopping QLogitechMediaServer [24622] in the Background.
> SlimServer/Cache/
>
> cp: omitting directory `/share/Multimedia/prefs'
> [/share/CACHED
steklo wrote:
> Hi digimaster,
>
> I still had the very first version of QLogitechMediaServer running on my
> NAS when I came here and found the reason why I never saw any upgrade
> offered in the app center.
>
> I'm not firm with terminal commands at all, but I follo
gt; Having said that - I have messed around with the plugins - removed quite
> a few that come out-of-the box from the @digimaster install files, and
> then added some directly out of the LMS Server Setting - Plugins Page.
>
> My suggestion: the .QLMS.conf file contains the option 'F
stoobie-doo wrote:
> This is what I am seeing; I haven't seen anything about installation
> packets
> Severity LevelDateTimeUsersSource IPApplicationCategoryContent
> Error2018/12/0222:04:59admin192.168.1.18App CenterApp Installation[App
> Center] Failed to install LogitechMediaServer. Model doe
stoobie-doo wrote:
> This is what I am seeing; I haven't seen anything about installation
> packets
> Severity LevelDateTimeUsersSource IPApplicationCategoryContent
> Error2018/12/0222:04:59admin192.168.1.18App CenterApp Installation[App
> Center] Failed to install LogitechMediaServer. Model does
*'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)
'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)
= QlogitechMediaServer version 2.03.00
= 03-12-2018
+ Now the x09/x19
In the error message it tells you the installation packets, and what it
should be.
Could you please tell what it says.
Another thing go in to a ssh shell, and tell me the output from uname
-m.
Are installing it from the QNap club app store, or manually ?
stoobie-doo wrote:
> I have a TS-251, s
created, if its not there by MusicIPServer.
Regarding releases, MusicIP has not been changed in any releases of
QLogitechMediaServer.
holbi wrote:
> Hi Digimaster,
>
> I managed to get MusicIP to work, most probably by entering the
> register.key into the mmm.ini file. After re-star
.
What should tell you, if both are running.
holbi wrote:
> Hi Digimaster,
>
> :cool:first of all: Thank you for your great development with the
> QLogitechMediaServer. :D
> I am following this thread now for a few months, and I managed to get
> the program running with Musi
Yes if its installed from QNap Club app store, you can not install it
manually.
But are you sure, the x86_64 will work?
But you could try it.
Logon with shh shell.
Do [ cd /share/*/.qpkg/LogitechMediaServer ]
Then [ cp -RP SlimServer/Cache /share/*/Download/ ] , [ cp -RP
SlimServer/prefs /share/
lucas72 wrote:
> www.roonlabs.comThat's some I can't tell you. Depends which ports it using.
Send from my mobile Phone
*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.
Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly ( with spotty,
youtube, Radio Paradise a.m. )
Several
Raiden2001 wrote:
> Wow. Great news that you are working on ARM support. Will suport for ARM
> TS-x09 mean that there will be support for TS-x10 versions, too?That I don't
> know, what the output from uname -m gives? Arm has so many
different flavors, especially the older one.
Send from my mo
lucas72 wrote:
> I had successfully changed to 9002 when I posted my update, but the
> problem is still there, that's why I was asking for any other hint to
> troubleshoot..
>
> [/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer] #
> ./QLogitechMediaServer.sh config
> [16:24:01 17-11-2018] startu
digimaster wrote:
> Change it in .QLMS.conf and restart QLogitechMediaServer. It then should
> use 9002. Should show in the logfile.
>
> Send from my mobile PhoneDon't forget to remove the # in front off the line.
> And you could check
it with QLogitechMediaServer.sh con
lucas72 wrote:
> Hi there, any chance to change the default port 9001? I guess its busy
> on my NAS coz I cannot get it the GUI...
>
>
> [UPDATE] changed the port to 9002 in .QLMS.conf but still no luck, any
> other place other than laconic QLogitechMediaServer.log to look in?
> tks.Change it
*
No need to uninstall any old lms installations, from version 2.00.00,
can be installed beside any other lms or perl installations.
'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)
'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu
*
No need to uninstall any old lms installations, from version 2.00.00,
can be installed beside any other lms or perl installations.
'How to add the Qnapclub store to the QNap App center'
(https://www.qnapclub.eu/en/howto/1)
'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu
mherger wrote:
> > Clean install: I uninstalled QLMS in QNAP's Web GUI. That removes the
> > installation folder, too. If the settings are stored somewhere else
> > besides SlimServer/prefs, they could be inherited, yes.
>
> Ah, ok. Yes, an uninstall usually only removes the application, but no
pt
to start or stop the services.
And a chroot envoriment, so LMS can find all the needed libraries and
programs.
dolodobendan wrote:
> @digimaster:
>
> Did you change the standard plugins when installing LMS? What I mean is,
> would the plugins and their activation status'
lodobendan wrote:
> I'll ask digimaster if he added something to the standard installation.
*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.
Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifi
dolodobendan wrote:
> You literally quoted it. [emoji14]
>
> "LogitechMediaServer_2.02.01_x86_64.qpkg"Oké rebuild and uploaded a new
> version.
Send from my mobile Phone
*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.
Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly (
dolodobendan wrote:
> This is what I get when trying to update manually:
>
> "You're trying to install the wrong version for LogitechMediaServer, it
> needs the x86_64 version!"
>
> Filename is LogitechMediaServer_2.02.01_x86_64.qpkgWhich file are you trying
> to install?
Send from my mobil
*
No need to uninstall any old lms installations, from version 2.00.00,
can be installed beside any other lms or perl installations.
= QlogitechMediaServer version 2.02.01
= 14-11-2018 :D
* Bugfixs release regarding time on some LogitechMedia
*
No need to uninstall any old lms installations, from version 2.00.00,
can be installed beside any other lms or perl installations.
= QlogitechMediaServer version 2.02.01
= 14-11-2018 :D
* Bugfixs release regarding time on some LogitechMedia
cphan wrote:
> Yes, this worked, thanks for your persistence on helping me find a
> solution.Oké then we found the solution. Great know now what the trouble is.
> Will
be fixed in next release. Thanks for letting me know. This are the fine
tuning things.
Send from my mobile Phone
*
maintain
cphan wrote:
> Is there a way to set a localized time?
>
> I'll reach out to QNAP to see what could be going on, but in the
> meantime I need my booms to display the correct time as they are alarm
> clocks in my house.
>
> Interestingly, I tried a different build of LMS on my QNAP server (a
>
anadigi wrote:
> I do installed from the QNap Club; but I don't see the update. option
> though.Strange hat no trouble on this side. Showed the update, and could do
> the
upgraded. So why it's not working at you're end, have no idea.
Send from my mobile Phone
*
maintainer of QLogitechMedia
Oke strange but looks like it has nothing to do, with
QLogitechMediaServer because the only thing which could do it was
localtime.
Curious what it could be, hope Michael knows a solution.
|Thank for letting me know. ;-)
cphan wrote:
> no localtime does not exist in .config/LMSHOST/etc/
>
> I j
If you have installed tho older version, through the Qnap app center in
the app store from Qnap Club.
Just use the update button.
If you have installed it manually through the QNap app center.
Download the right version, and install it through the app center.
The app center will see it as a upda
If exist
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/.config/LMSROOT/etc/localtime,
you should remove it.
Logon to ssh do
[ cd /share/*/.qpkg/LogitechMediaServer ]
[ rm -R .config/LMSROOT/etc/localtime ]
[ ./QLogitechMediaServer.sh restart ]
Wait until it's start it started, then it should be
*
'The latest QLogitechMediaServer version!'
(https://www.qnapclub.eu/nl/qpkg/545)
No need to uninstall any old lms installations, from version 2.00.00,
can be installed beside any other lms or perl installations.
Version 2.02.00 13-11-2018 :P
= QlogitechMediaServer version 2
cphan wrote:
> Yes, I'm using QLogitechMediaServer. How long until the release, I may
> roll back as I need my alarm to be correct.
>
> ThanksI think tomorrow, just need to test some things before releasing it.
What you could do, it Logon on by ssh shell. Then do [ CD /share/*/.
qpkg/LogitehMe
cphan wrote:
> Just updated LMS on my QNAP server to
> Logitech Media Server Version: 7.9.2 - 1541869104 @ Sat Nov 10 18:20:42
> CET 2018
>
> On reboot I noticed that my two Boom's now display time as GMT+1, but my
> touch still displays the correct time (EST / GMT -5).
> I connected the booms
You must setup one spotify accont in LMS.
And after that, and enable spotify connected on the player page.
Then it works.
jasell wrote:
> Ok, I see.
>
> I wish to avoid to add the Spotify account into LMS Spotty.
>
> If the players can be announced on the local network this should be
> possib
jasell wrote:
> Do you mean that you announced players on the local network from
> Spotty. And then from a Spotify acount on a device on the same network
> could connect and play Spotify-music on a squeezebox.
>
> Do we need to do anything to get this working or do you need to release
> a new
Yesterday evening did some testing with spotty.
Used a spotify account, and set it up in LMS.
Then took another spotify, which was not in LMS.
With that one could connected to LMS spotty and play songs.
There was no trouble using it, without adding the account.
yeomanspc wrote:
> Oops. I ca
yeomanspc wrote:
> Oops. I cant believe I did not see the # at the start of every
> line[emoji15]. Musicip working now. Just need to sort the other issue
> (which I know is not QLMS).
> Many thanks. How do we make a donation?
>
>
> Sent from my iPhone using TapatalkNice it's working for
Regarding MUSIP, you should edit .QLMS.conf for that.
And then the line #MUSICIP=0 should become MUSICIP=1. and be sure that
you remove the # at front of the line.
Another way could be, to do [ touch .MUSICIP ] inside the
./qpkg/QLOgitechMediaServer directory.
Then when you are inside the qpkg/Q
Don't know what you mean.
Included in the installation is,
Perl 5.24.4 with original cpan modules included( from version 1.09.a)
( For better support of several functions in LMS )
>From version 1.09 up until now Perl version 5.24.4 is included.
dolodobendan wrote:
> I upgraded to the latest
Oke then we could try, to disable de dbus which makes the connection to
avahi.
Then spotty wont see the avahi, and anyone should be able to connected
with spotify on the wifi.
If i understand what you're telling us.
And thats something which i can build in QLogitechMediaServer.
mherger wrote:
>
yeomanspc wrote:
> I am running QNAP TS 670Pro (i7) with QTS 4.3.4.0695
> An early convert to QLogitechMediaServer here, I am still running 1.09a
> and it is showing that as installed on QNAPCLUB. No upgrade option. If
> I click on the icon, it says the version available is V2.0.10
> (2018-11-
Oke so if i understand correctly, without avahi-daemon it would work
with spotty.
Thats something which could be done, if one does not want to use
shairtunes2.
If i understands correctly, the dbus connection is only used to connect
to avahi-daemon in LMS?
mherger wrote:
> > There is a feature t
301 - 400 of 738 matches
Mail list logo
