dream wrote:
> I tried. Same result as before.
>
> It finally run .config/.TROUBLE scriptHmmm according to some things I saw in
> you're posting. There also is
some thing wrong in LMS.
Try this do touch .NOMAJOR in the .qpkg/LogitechMediaServer. And then
./QLogitechMediaServer.sh restart.
S
dream wrote:
> I have changed grep -m in .config/.TROUBLE so that there's no grep error
>
> PERL=1
>
> [/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer] # touch .NOMAJOR
> [/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer] #
> ./QLogitechMediaServer.sh restart
> Gone restart LogitechMediaServer
dream wrote:
> No. I added a new line PERL=1 just below and left the line untouched.
>
>
>
> RENICE="-10"# ( -10 ) [ A value between -20 (
> high prio ) and 20 ( low prio ), empty "" will deactivated it. ( QTS 4.2
> or lower it can be added by optware ) ]
> IONICE="-
Youŕe to mutch looking in the code.
Leave it, sure because of you're several busybox version, where the
oldest handles the command is a issue.
But that can be fixed on a very easy way.
But the basic is it should start LMS without trouble.
Now i saw this in one off the logs you shared.
The follo
dream wrote:
> I google and I found that I'm not alone that slimserver has module
> version conflicts. :cool:
>
> I can arrange if you want to log into my NAS.
>
> Good NEWS.
> touch .PERL works. Now slimserver can start and I can log in to 9001
> port server.
> Slimserver also starts succes
dream wrote:
> I wonder why .PERL file works but PERL=1 does not
>
> If you want to log into my NAS, just tell me.Why the PERL=1 is not working,
> is my mistake. Forget to included again
while rewriting the perl routine. Will be fixed in the new release. The
same for the df and ping error.
S
mnd wrote:
> I think (hope) this would solve the issue with the UPnpBridge plugin
> (descibed 'there'
> (https://forums.slimdevices.com/showthread.php?103728-Announce-UPnPBridge-integrate-UPnP-DLNA-players-with-LMS-(squeeze2upnp)&p=970054&viewfull=1#post970054)),
> which occurs for me periodical
mnd wrote:
> Will try that, thanks.
> But later, because I did some updates to the Qnap firmware and some of
> the apps. And was inpatient with QLMS update, which got stuck for half
> an hour at 80%, so I cancelled it..
> Now the QLMS application status is stuck on "starting" in the QTS
> webpag
mnd wrote:
> Thanks for your reply. I did "touch. PERL", but the command was not
> found. I used putty on windows computer to enter ssh, but maybe
> something has to be installed on the Qnap for the command to work?
> And I think the processor of the Qnap is indeed arm 32 bit, it's a
> TS-231P n
mnd wrote:
> Sorry for my incompetence, putting the dot in front of PERL helped and I
> can access the server through web interface now.
> Still having some problem with a UPnPBridge plugin, I could not get it
> to run after the update and the touch command, so I decided to reinstall
> it, but i
mnd wrote:
> Yes, I was also using it before, on LMS 8. But now the selection of the
> static or not static binary is not there anymore in the plugin's
> settings, so it doesn't start.
> I thought maybe the plugin determines which binaries to make available
> for selection in the settings, by c
Lestrad wrote:
> Hello. I know this problem's been dealt with, but nothing I do seems to
> make it go away.
>
> Since I updated my installation of Arch Linux for ARM (to version
> 5.6.11-1-ARCH), I can longer start LMS. "systemctl status
> logitechmediaserver.service" produces this:
>
> >
Cod
Lestrad wrote:
> Thanks! But before I try downgrading perl, I'd like to solve the problem
> at the level of the LMS installation if that's possible. Stay tuned.
>
> LesUp to you, but I know perl 5.28, LMS and armhf/armv7 will not work.
Several user have rapporten this issue.
Send from my mobi
danielvo wrote:
> Hi,
>
> I'm using MediaServer 8.0.0 and with every start the server sets the
> user "unix/squeezeboxserver" as owner to all my mp3 files. Why is he
> doing that?? I can't change/add anything. When I set the files manually
> to owner "admin" Server still works fine.
> Any hints
danielvo wrote:
> Hi digimaster, thx for helping.
>
> That is the server info, running on a Qnap Nas, installed via Qnapclub:
>
> Logitech Media Server Version: 8.0.0 - 1589867264 @ Tue May 19 08:24:33
> CEST 2020
> Betriebssystem: QLMS 2.X (QNAP TurboStation) [Debian 9 s
*
== QLogitechMediaServer version 2.21.00
= 21-05-2020
! With version armhf/arm7 the arm-x41, there was a error with perl 5.28.
( error in LMS build )
Through this LMS did not start. For now will not be started with perl
5.28.
( If you still want t
I can also conform this, running on QNap nas-System.
Running QlogitechMediaServer 8.0.
Same trouble here, the UPnP and ChromeCast plugin are gone after
update.
The problem can up a few weeks ago.
frankd wrote:
> Just to add to this story and to ensure that dolodobendan's case is not
> a singl
danielvo wrote:
> I re-setup up the server vom scratch and it could not find any music
> (permission denied). Then I turned off "advanced folder permissions" and
> now it's scanning.
>
> Long story short: Is there any EASY way to give the server accses to the
> music files WITH adv. folder perm
George_C wrote:
> Hello digimaster,
>
> I am eager to try QLogitechMediaServer (QLMS) on my TS-212P. According
> to your initial announcement dated 2018-02-11, QLMS can be installed on,
> among others, systems with arm5te architecture. My TS-212P has
> armvtel-linux arc
dolodobendan wrote:
> Just the Airplay bridge. It's faster now, but I'll keep watching. :)With the
> latest nightly, could install UPnPbridge, castbridge again with
no trouble.
Send from my mobile Phone
*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.
Qnap TS-453a, with Log
Yes the update routine, is changed a bit.
The same for the upgrade routine.
Removed some old stuff, and made some things smaller.
But still everything depenps on the work load of youÅe QNap
Nas-System.
With several thing running in the backGround like Plex,Sabnzbd, lidarr
and more, some times ot
mherger wrote:
> > With the latest nightly, could install UPnPbridge, castbridge again
> with
> > no trouble.
>
> Great to hear, thanks!
>
> --
>
> MichaelDid another test. Restored settings and plugins from backup.
LogitechMediaServer rapporten that there where updates for castbridge,
UPnPb
tintinabulum wrote:
> Could someone tell me where to start looking for a solution to an issue
> please, be it searching site, basics page or whatever. I had QLMS
> running fine but following either a QNAP update or installing 2.20.00,
> it ceased to work (February?). I'm an amateur but brave, I'
tintinabulum wrote:
> Thank you, baby steps, how do I log on? Would that be ssh from a mac for
> instance? I've only ever used the GUI. Embarrassed...Or point me to
> beginners guide?
>
> Cheers Martin
>
> Poking around found these?
> [QLogitechMediaServer] error: Can't start LogitechMediaServe
tintinabulum wrote:
> With the aid of my son, we got this...
>
> Main log when trying to run / restart LMS:
> https://pastebin.com/C9zXjGxZ
> Log of SSH output when trying the above: https://pastebin.com/iQj4iBn5
>
> CheersStrange you're error is on missing squeezeboxserver user. Have you trie
tintinabulum wrote:
> Thanks for looking into this. I've just uninstalled, restarted and
> reinstalled but the same result.In the .qpkg/LogitehMediaServer directory,
> there should be a file
called QLogitechMediaServer.log.err. I need that one to see where things
go wrong.
And with version th
tom_ruhr wrote:
> HI Digimaster,
> many thanks for the excellent work on this topic.
> My QLogitechMediaServer Installation on a Qnap ST253Be is somewhat
> unstable.
> Last errorlogs contain these lines:
>
> thread 'main' panicked at 'called `Result::u
tom_ruhr wrote:
> Thanks for the very fast answer!
> I checked my /tmp with df -h an found these lines:
>
> /dev/md13 417.0M405.0M 12.0M 97% /mnt/ext
> ...
> /dev/md13 417.0M405.0M 12.0M 97%
> /share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/.config/L
mjack wrote:
> Hi, Im running QLogitechMediaServer 2.21.00 successfully on my QNAP
> TS-251+. Yesterday, I updated from LMS 7.9.3 to 8.0.0 and discovered
> MusicIP and the Dont stop the music feature doesnt work anymore.
> Reverting back to 7.9.3 immediately brought MusicIP back working.
>
slartibartfast wrote:
> MusicIP and Don't stop the music are compatible with LMS 8.0 though.
>
> Sent from my Pixel 3a using TapatalkCould be the case, but if they work under
> 7.93 but not 8.0 there could
be a issue regarding compatibility.
And as most user including me, got both working unde
mjack wrote:
> I can support user level debugging. Do you suspect that it is a
> QLogitechMediaServer problem or an LMS 8.0.0 problem? Who could deal
> with this topic?I read some on the from, that there was a problem with the
> Musicip
plugin. Where lays the error?
Send from my mobile Phone
AlanF51 wrote:
> Hi,
> I am Migrating to a new NAS, I have QLogitechMediaServer up and running
> on the new NAS (had some permission issues that seem to have healed with
> some restarts, Install was smooth).
> My question is can I copy / export playlists from the old machine to the
> new machine
AlanF51 wrote:
> I will have to ssh in and see, the share/multimedia/music/mymusic is the
> same on both machines but the absolute path may be different
> Thanks,
> AlanIf the absolute path is different it won't work.
Send from my mobile Phone
*
maintainer of QLogitechMediaServer, QOptware-
If you read the READ_ME_TROUBLE, there it's also explained how one can
do a manual up- downgraded by placing the file in the download share of
you're Qnap system. Then start or stop/start QLogitechMediaServer
through the app center will install and start lms with that version. And
as long you don
Zombie wrote:
> Will I be notified about updates and can I start manual updates with
> this setting?No then you have to look on the websites if there is a update. .
Only the Logitech Media Server: Unix Tarball (i386, x86_64, i386
FreeBSD, ARM EABI, PowerPC) is the file, which you can download a
blackbite wrote:
> Hi Digimaster,
> just because I´m interested in your hint. I searched the file
> README_ON_TROUBLE but couldn´t find anything about the up-/downgrade
> with files in the download share. Could you please tell me, where this
> is explained?
>
> Thank UAll Q
ile from the
> slimdevices/nightly page?
> In my case for example
> "logitechmediaserver-8.0.0-1600144351-arm-linux.tgz"?
>
> But I think, I can answer myself and perhaps a few others the question
> now.
> I found something in the "QLogitechMediaServer version 2.
The logitechmediaserver-?.?.?-??.tgz is the filename, to
download and used with QLogitechMediaServer.
And that should be the file placed in the Download share of you're QNap,
to do a mannuel up/down graded with QLogoitechMediaServer.
As explained the one to download, and put inside the sh
tonymac wrote:
> Dear Digimaster, I too have problems after installing
> QLogitechMediaServer, when trying to open, it refuses to connect. Have
> followed your suggestions above and this is the output I have - 'Can't
> find\var\run\dbus. I hope you can help me
>
&
lucas72 wrote:
> Only 86/i*86/X86_64/arm5te/armhf/aarch64/arm_64 architectures are
> compatible with the package, AFAIK the QNAP TS-128A mount a Realtek
> RTD1295 CPU which is an ARM V8 architecture, thus not supported.
> I refer to the package one you can find on the (un)official app store
> he
tonymac wrote:
> I have the exact same problem on a Qnap TS 239 PRO. Been perfectly ok
> for years and suddenly Logitech server has disappeared. Wherever I try
> to download new installation it will not reinstall. Any help appreciatedCould
> you please start by telling use some more. Like how i
athelney wrote:
> Hi digimaster,
>
> As I've had some issues, I decided to perform a clean install using a
> package downloaded from the Club to my PC.
>
> Following the install I noted that version 8.1 had been installed rather
> than 8.0 which, as 8.1 is no
dolodobendan wrote:
> Overwriting the old installation should normally work. I would try that
> first.
Yes upgrading to the installation, will always preserve the settings.
If you want to be sure, do ./QLogitechMediaServer.sh backup.
And then after upgrading, and you are missing settings do
./Q
linkinpin wrote:
> I just saw a ssods faq with an entry with the title -Use binary Perl
> modules shipped with SBS-.
>
> It references a file called -/opt/ssods4/share/sbs/shipped-binaries-
>
> # List of files shipped with SSODS that are also in $SSIDR. All
> paths/files
> # listed here are r
eduardoo wrote:
> Anyone else experienced these issues or know how to fix them? Thx.
Same issue here, got a ts-453A with intel celeron inside.
And run LMS through ssods.
The problem is, that the binarch stays on i386.
And even if you copy the bins from the i686 directory to i386, the
plugin loo
I testing to install LogitechMediaserver on Qnap ts-453a, whitout ssods
Works like a charme, but not all the added binhelpers work fine.
If i got it work, looking for away the make it in a qpkg.
digimaster's Profile: http:
Zombie wrote:
> Is this a normal app for QNAP or a container thingy?A normal app.
Verstuurd vanaf mijn H30-U10 met Tapatalk
*
Qnap TS-453a with Optware-NG and LogitechMediaSever 7.9.1
Serval raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play
*New release of LogitechMediaServer for Qnap x86_64 version 1.0
'Qnap LogitechMediaServer 1.0 x86_64' (https://goo.gl/f36W2p) :D
Change log version 1.0
+
Here it is the first officieel release of LogitechMediaServer for QNap
x86_64
Testing is ready, serval people did try it.
And it works great, so i released the final version.
'Have a look here, to find the latest version !'
(http://forums.slimdevices.com/showthread.php?108292-LogitechMediaServer-for-Qnap-x86_64-with-qts-4-2-or-higher)
Man in a van wrote:
> Testers requi
Zombie wrote:
> Got 7.9.0 in a container on a QNAP NAS, want to install the "proper" app
> as per other thread in this forum.
> Is there a way to transfer all the settings in my old LMS to the new one
> I want to install, wtihout going through the tedious process of
> repeating all settings again
You can stop en start LogitechMediaServer form the app store, through
the webgiu from QNap.
Or logon through shh shell, and them do [ [cd
/share/*/.qpkg/LogitechMediaServer/ ], [ ./LogitechMediaServer.sh
restart ] and then exit to logout.
Be aware it will take a few minutes, before you can use
Log
Tried if ShairTunes2W, but it wont load the plugin.
So no at the moment its not working, so have to look in to this.
I needed to know which perl modules are need to make it work.
So maybe to make it work in future releases.
scala wrote:
> Excellent initiative! This will fill a very huge gap!
>
Some times it takes a few minutes, before you can acces the webgui.
Especially when a lot of new plugins must be installed, of when you have
copied a old prefs directory to the Slimserver directory.
Zombie wrote:
> LMS won't start after I copied the prefs directory from the LMS in the
> contain
Which lms app do you use?
*
Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Serval raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*
---
Oke what you cab try, is logon with a ssh shell.
Then do [ cd /share/*/.qpkg/LogitechMediaServer/ ]
And then [ ./LogitechMediaServer.sh stop ], and the [
./LogitechMediaServer.sh failsafe ]
The check if its then running do [ ./LogitechMediaServer status ], on
which it should say something like ( L
Glad to hear its working on you`re QNap.
Lucky that LMS is running on QNap again, and integrated in the operation
systems off QNap.
Next version will be a update of LMS to the latest version of LMS
nightly build.
Also working on a way, the init script, will make a log to keep track of
any errors,
mherger wrote:
> Hi digimaster
>
> thanks a lot for easing LMS installation on the QNAP! What I was
> wondering about is why the package would come with LMS pre-packaged?
> Couldn't you have a much smaller image which then would install whatever
>
> latest nightly?
janus wrote:
> Sorry I didn't check with uname -m and it appers that my QNAP is not
> supported by your package... ;-( Maybe can you make it available in the
> future? Thank you very much!At the moment it is only working on 86_64. Still
> looking for more
information how to make it work on other
*New release of LogitechMediaServer for Qnap x86_64 version 1.01
'LogitechMediaServer for Qnap x86_64 version 1.01'
(https://goo.gl/g8WBxz) :D
Change log version 1.01
+
* Add logfile function. It will write a logfile in the root di
I DO APOLOGIZE FOR VERSION 1.01. AFTER RELEASING IT, NOTICED, THAT LMS
DID NOT START FROM THE QNAP WEBGUI.
SO THAT'S WHY I RELEASED THE VERSION 1.01A WHICH HAS THE PROBLEM FIXED.
'LogitechMediaServer voor Qnap x86_64 versie 1.01a'
(https://goo.gl/Aj2fUi)
*
Qnap TS-453a, with LogitechMediaSe
eduardoo wrote:
> Hi,
>
> I recently find that full text search plugin doesn't work with Unicode
> on my setup (469L with your qpkg). See thread here:
> http://forums.slimdevices.com/showthread.php?108322-LMS-search-doesn-t-support-Unicode
> I have no idea whether it would in any way be related
eduardoo wrote:
> Thanks. Is there any possibility that it is related to the qpkg? If
> so, maybe I can also let Digimaster know about the issue.
It could more a thing regarding the setup off youre NAS.
Check following, logon in a ssh shell, and do set, look for
LANG=en_US.UTF-8
*Out now Qnap Optware-NG version 2.0.
The best solution the get the best out of you`re LogitechMediaServer.
It has support for flac, lame, mac(ape) and many more
( I would suggest 'Optware-NG'
(https://forum.qnap.com/viewtopic.php?f=124&t=137710&p=648516#p648516),
as it has the most audio program
cphan wrote:
> Just installed this app on my new TS-251+, works great right out of the
> box.
>
> Should I add your Optware package, what does it add?
>
> ThxIt's nice te read, that it works on you're Qnap. And yes tried to make
it work right out of the box.
The Optware gives you lame support,
boyracer wrote:
> Hi
>
> Before I take the plunge and unistall my old squeezebox QPG can you
> confirm if this will work on my QNAP TS-219PII Running Version 4.33.0404
> software?
>
> ThanksAs I explain Logon a ssh shell, and do uname - m, should there show
x86_64.
If so you can install it.
we could look to included it in the
QPKG.
At the moment looking on a way to also make it work on x86 based Qnap
nas systems.
Greeting
boyracer wrote:
> Thanks Digimaster. My QNAP is based on the Arm chip. Would you mind
> sharing the code you used so I could look at it and see if I mig
steklo wrote:
> Hello,
>
>
> 4) Most recently digimaster posted his new package for a direct
> installation onto QNAP which should be up
>
> 1) seems to be a bit tricky and obviously needs some command line
> editing.
> The advantage of that method is you can e
If you copied some directory`s from you old LogitechMediaServer.
Do logon to you`re Qnap by ssh shell, do [ cd
/share/*/.qpkg/LogitechMediaSever ] and then [ chown -R
squeezeboxserver SlimServer/ ] and then [ chmod -R SlimServer/ ].
Then do [ cd (to the root directorys where you music directorys
Thanks karlek you`re so right.
it`s chmod -R 0775 (directoryname)
karlek wrote:
> digimaster only forgot the 755 in the first chmod command.
*
Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Serval raspberry with hifiberry amp+ and picoreplayer.
L
In the webgui of you`re Qnap control panel there is a option to set
you`re country/region.
Otherwise check the Qnap form, as unicode is handle by the Qnap itself.
LogitechMediaServer uses the settings for this from the Qnap QTS
system.
'https://forum.qnap.com/search.php?keywords=unicode]Look her
Tested it and same error on soc in the x86_64, it complains about the
missing libgomp.so.1.
Did a ldd x86_64 and got this.
ldd sox
linux-vdso.so.1 (0x7ffdee3b9000)
libgomp.so.1 => not found
libm.so.6 => /lib/libm.so.6 (0x7f93321cb000)
libpthread.so.0 => /lib/libpthread.so.0 (0x7f9331f
Thanks to Spacehead, we found that the supplied sox in the lms
Bin/x86_64 is not working.
As it seems to mis libgomp.so.1 file, which is used by ffmpeg.
As it`s a file which comes with the LMS release, they should fix it. (
report a issue on the git website )
But due to this, some playback will n
right, and only can read directory and file with 0775.
earthbased wrote:
> Hi, I have a TS-251A with Celeron N3060 X86-64. Some questions: 1) Since
> I currently use SSOTS, will using DIGIMASTER package use same install
> location? 2) If so, will SSOTS cause problems if not uninstall
A shame need more time, getting error trying to add it.
But will come back on this, once i can fix the errors.
scala wrote:
> Excellent initiative! This will fill a very huge gap!
> I will try it for sure: I'm currently struggling between maintaining my
> current ailing installation via SSOTS an
earthbased wrote:
> Will installing Qnap-LogitechMediaServer fix the App Center LMS version
> info mismatch? After all installed, how do I update to new nightly?
> ThxJust download it, and put it in the download share off your Qnap. And
then stop and start Qnap-LogitechMediaServer from the app
There is something wrong, with you're Qnap, Perl is ELF64/64 bits.
And this error on you're system should be fixed.
As that's says it ELF32/32 bits,
/usr/bin/perl: error while loading shared libraries: libnsl.so.1: wrong
ELF class: ELFCLASS32
greetings
qnapfan wrote:
> @d
*New release of LogitechMediaServer for Qnap x86_64 version 1.02 (
25-12-2017 )
MDS5 check [ caa0ba05cca9d7d0f5748605637f8908
build/LogitechMediaServer_1.02_x86_64.qpkg ]
'LogitechMediaServer for Qnap x86_64 version 1.02'
(https://goo.gl/Bs4HGM) :D
= Qnap LogitechMediaSever ve
work around is to symlink it there.
Compiling/make perl from source on a Qnap systems is a big problem.
Another qeustion why don't you upgrade to QTS4.3 ?
qnapfan wrote:
> Hi digimaster, tanks for your answer.
> The perl package you are delivering uses dynamic libs, in this case
>
ELF64.
Could you do /bin/ls -l /usr/bin/
And post the outcome here ?
qnapfan wrote:
> Hi digimaster,
>
> well the QTS 4.3 relases are not available for the TS-459Pro+.
> I have a running perl 5.2.4.1, i even compiled some of the missing
> modules, and was able to pass the start p
dolodobendan wrote:
> My (I guess now related) HD FLAC problem is fixed in digimaster's
> installer release 1.02.
>
> Thank you digimaster!Nice to read it fixed you're problem.
*
maintainer of Qnap-LogitechMediaServer and Qnap-Optware-NG.
Qnap TS-453a, with LogitechM
qnapfan wrote:
> Hi Digimaster,
>
> i tried all options regarding your release, with and without perl pre
> installed, that fact is, the 64 bit release does not match my system and
> that causes the problems.
>
> I used a toolchain, compiled perl 5.24 from scratch, comp
qnapfan wrote:
> Yes it is a ELF32 Perl.
> Just for my understanding, you used /usr/local/perl during build why not
> /opt/perl ?
> Anyway i am matching now my build to your locations.
>
> I forgot to compile JSON 2.90, the youtube plugin works in a short test
> also with the older JSON relase,
In a few days, i will release version 1.03.
Found some info regarding unicode and LMS, and it thats release will ad
a extra option which hopefuly will solve you're problem.
eduardoo wrote:
> Hi. Sorry for the late feedback.
>
> Been out of town lately and didn't get to do the above investigat
! I changed the setting on the
> behaviour of flac back to system defaults (these systems standard
> settings lead to my problem) and no error messages anymore, playback on
> my *.wav-files is just fone.
>
> So many thanks to all who participated in here and especially to
> digimaster
david572366 wrote:
> Hi Digimaster,
>
> My Qnap NAS is QTS 4.2.5 (TS-669-Pro) System. I can't log in ip:9001
> after install "LogitechMediaServer for Qnap x86_64 version 1.02 (
> 25-12-2017 )"
> and with following message from ssh:
> "/share
Oke thanks, and which QTS version are you running.
Need more information, about the layout off you're Qnap/QTS system
Could you give the out come from the following commands ?
[which sudo],
[which su ],
[which start-stop-daemon],
[which nice],
and [which renice].
I think with that info, i can s
things are solved
and added like,
Showing up in Qnap resource Monitor.
Better support for UTF8
Possibility to control startup cli options for LMS.
More aware off the host Qnap/QTS system, and commands which are present.
Auto update LMS with Officieel and nightly releases.
qnapfan wrote:
> @digimas
Oke here i hope a fix, let me know if it works.
This is specially for QTS 4.2
'Qnap_LogitechMediaServer x86_64 version 1.02a QTS 4.2 fix'
(https://goo.gl/aFnAx3)
david572366 wrote:
> Hi digimaster
>
> My QTS is 4.2.5,rest info I need to go back home to check it. But I am
correctly in the tread from spotty, you could otherwise fill
the username/password on the spotty plugin pages.
MathSWE wrote:
> @digimaster - A huge BIG thank you for this life saving
> implementation Ive built my home audio system on the Squeezeboxes
> since their first releas
Strange problem, because it should work.
And is you go to [ cd /share/*/.qpkg/LogitechMediaServer ]
And do [ ./LogitechMediaServer.sh start ]
What doe sit give as error or messages ?
david572366 wrote:
> Hi digimaster
>
> I have use 1.02a, but it is same can't login IP:9001, t
Be patience there are a few things, that i need to fix before release
1.03.
And waiting on input regarding QTS 4.2 and lower.
Almost ready, but need a little more adjusting and cleanup.
Making it besides working, studie, enjoying music and having a life.;)
dolodobendan wrote:
> That is awesome,
KeBul wrote:
> Hi Digimaster,
>
> Good work on this, thanks very much, really appreciate your effort.
>
> I've tested this a few times on xS-n51+ QNAPs and it works very well,
> easy and straightforward install and somewhat faster than my RPI.
>
> The ability t
david572366 wrote:
> Hi Digimaster
>
> Now I go back to LMS 7.7.2,I will try this after I upgrade to QTS
> 4.3,Thanks!Oké but be aware SSOTS should not be installed. QTS 4.2. is missing
several commands, where QTS 4.3 has them out of the box. That's where it
goes wrong, looking
Yes it sure is, not a big deal making it working on you're own Qnap.
But keeping in mind, it should also work on other Qnap devices is a big
deal.
I started working this way in april/may last year, as was getting more
and more trouble with the SSOTS/SSODS way.
And it stil is working great for, aft
I would first backup you're Cache and prefs directory some where safe.
So you can set you're configuration back !
earthbased wrote:
> Finally got ssh working from my Mac to Qnap again (Qnap upgrade broke
> ssh)
>
> Regarding SSOTS, it looks like everything is in /opt/ssods4. I see
> '.unin
*New release of LogitechMediaServer for Qnap x86_64 version 1.03beta (
08-01-2018 )
MDS5 check [ dc550788b7490608f29ca5464272443b
LogitechMediaServer_1.03beta_x86_64.qpkg ]
'LogitechMediaServer for Qnap x86_64 version 1.03beta'
(https://goo.gl/bdNhV7) :D
= Qnap LogitechMediaSe
dolodobendan wrote:
> I'll do the honors and tell my findings.
>
> The good things:
>
> > > >
- It's in Ressource Monitor now! Whooo!
> > >
>
> The neutral things:
>
> > > >
- It took a VERY long time to start (it was maybe ten seconds in
> 1.02) [*Edit: My bad, it did dow
dolodobendan wrote:
> I'll do the honors and tell my findings.
>
> The good things:
>
> > > >
- It's in Ressource Monitor now! Whooo!
> > >
>
> The neutral things:
>
> > > >
- It took a VERY long time to start (it was maybe ten seconds in
> 1.02) [*Edit: My bad, it did dow
Just maybe a few small adjustments, test it if it solve it ?
'LogitechMediaServer for Qnap x86_64 version 1.03.1beta'
(https://goo.gl/z2AN1N) :D release 09-01-2018
dolodobendan wrote:
> I'll do the honors and tell my findings.
>
> The good things:
>
> > > >
- It's in Ressource Monito
'LogitechMediaServer for Qnap x86_64 version 1.03.2beta'
(https://goo.gl/P1q8K6) :D release 09-01-2018
Minor fix on stopping LMS.
This should do a proper job !.
dolodobendan wrote:
> Even after a reboot I couldn't stop LMS. But I could install the new
> beta on top of it. Booyah!
>
> The se
401 - 500 of 738 matches
Mail list logo
