Public bug reported:
I was running apt-upgrade and it said to send a crash report.
ProblemType: Package
DistroRelease: Ubuntu 22.10
Package: linux-firmware 20220923.gitf09bebf3-0ubuntu1.1
ProcVersionSignature: Ubuntu 5.19.0-19.19-generic 5.19.7
Uname: Linux 5.19.0-19-generic x86_64
Public bug reported:
i installed lightdm but cannot start it manually
using ubuntu 22.04.1 LTS
release 22.04
codename: jammy
ProblemType: Bug
DistroRelease: Ubuntu 22.04
Package: lightdm 1.30.0-0ubuntu5
ProcVersionSignature: Ubuntu 5.15.0-47.51-generic 5.15.46
Uname: Linux 5.15.0-47-generic
Public bug reported:
Description:Ubuntu 20.04.4 LTS
Release:20.04
I had attempting an upgrade to 22.04.1 LTS using do-release-upgrade with
all default options when this error occurred, filesystem was unusable
afterwards.
ProblemType: Package
DistroRelease: Ubuntu 22.04
Package:
Public bug reported:
I have two mice each with their own dongle. 1 is the microsoft sculpt
keyboard mouse combo and the other is a logitech master2 (using dongle
not bluetooth). Both of the mice work while in the login screen but
once you log in neither will control the cursor.
I know they are
My kernel was stuck on 4.4. I had to manually update /boot/grub/grub.cfg
with 'sudo grub-mkconfig -o /boot/grub/grub.cfg' to get the 4.15 kernel
to be available in grub to boot from. After that, and booting from 4.15
kernel, I can get bash into focal lxd container. Marking invalid.
** Changed in:
Public bug reported:
I cannot get a bash shell into a focal container on my bionic host.
stdout shows TIOCGPTPEER unavailable message.
`lxc ls` shows it is running, and I can ping it's IP address.
$ lxc exec focal-NOTREAL -- bash
Error: TIOCGPTPEER required but not available
$ uname -a
Linux
Public bug reported:
After a resume from a lock/suspend, windows sizes are changed, fonts are
incorrect sizes (until mouse over), and windows have moved from the
secondary monitor to the primary monitor. This happens every time the
displays have been off (from a suspend or lock screen). AMD
The easiest way I found to reproduce was to monkey patch the python
paramiko library. I've attached a short script which can be used to
test a host. It requires either python-paramiko or python3-paramiko to
run.
** Attachment added: "test_bug_1863930.py"
Public bug reported:
SSHD closes the connection and logs the error message below when a
client presents a protoversion of "1.99":
Protocol major versions differ for X.X.X.X port X:
SSH-2.0-OpenSSH_7.6p1 Ubuntu-4ubuntu0.3 vs. SSH-1.99-XXX
RFC 4253 only states that clients should treat a
This issue impacts the experience with Ubuntu significantly. Android,
Windows, and OS X all sound much better with a Bluetooth headset when on
calls, playing games, or listening to music while using the headset
microphone.
--
You received this bug notification because you are a member of Ubuntu
I didn’t need to remove GDM3, but installing LightDM (and switching to
it) fixed it for me. Well, I should say it was a workaround, anyway...
> On Oct 24, 2018, at 11:56 PM, ccdisle wrote:
>
> Uncommenting "WaylandEnable=false " worked.
>
> Removing gdm3 did not work, I just got redirected to
I upgraded from 17.10 to 18.04. It wouldn't log in, but through ssh I
purged the nvidia drivers, installed 396 through the PPA, rebooted, and
it came up and worked. It is a tower with GTX 1060.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which
I hear Pop!_OS 18.04 doesn't have this issue. I'm unfortunately about to
give up on Ubuntu and give that a try. Some word of reassurance from the
Ubuntu team here would be nice. Where they marked this as fixed, I'm not
hopeful of a fix--at least anytime soon. If anyone has found a true and
simple
At the top of this page it says "Fix Released". Does anyone know to to
get them to change the status to an open bug and re-evaluate it? It's
clearly not fixed.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mesa in Ubuntu.
Hopeful this bug was fixed (as it improperly states above), I did a
fresh install on my machine with an Nvidia 1060. It will boot, then go
to a black screen on login, etc. I tried what people mentioned above,
but was not able to get a stable working system. I went back to 17.10
and have not had
I found a solution on stackoverflow thanks to @kbenoit there.
https://askubuntu.com/questions/117899/configure-networkmanagers-
dnsmasq-to-use-etc-hosts
This is not really a bug at all. You just have to configure stuff under
/etc/NetworkManager/dnsmasq.d instead, e.g.,
# echo
Public bug reported:
If I dare to launch any electron-based app (chrome, spotify, atom,
vscode, etc.) there's roughly an 80% chance that it kills X (bringing me
back to the login screen). This doesn't _always_ happen. Note that I
have a 4k laptop, with a 4k external screen. Things seem to have a
I'm seeing something similar on Bionic when using the Communitheme on
Wayland session, where the scrollbar also goes past the bottom of the
window. It does not show up when using Xorg. I think the problem also
appears under the Ambiance theme on Wayland, but I do not have a
screenshot immediately
I'm also now wondering if perhaps this is a duplicate of 1720651.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1750889
Title:
GNOME Terminal scrollbar looks weird on
Public bug reported:
Every time I perform an upgrade request, I receive this error
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: libjasper1:amd64 1.900.1-debian1-2.4ubuntu1.1
ProcVersionSignature: Ubuntu 4.10.0-37.41~16.04.1-generic 4.10.17
Uname: Linux 4.10.0-37-generic x86_64
Thanks for the update, Tyler. I know this has been a long road, but the
cumulative effect of everyone's hard work on this particular front will
be huge. I'm very much looking forward to this.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is
I tried disabling fstrim on all but one server and had the exact same
issue as I did when cron enabled it on all servers.
- Original Message -
From: "Nick Stallman" <1681...@bugs.launchpad.net>
To: "Kyle O'Donnell" <ky...@0b10.mx>
Sent: Tuesday, August
Public bug reported:
I upgraded from 16.10 to 17.04 using Software Updater on 2017-07-22. The
upgrade is working well except for almost complete lack of sound; the
only time I've heard sound is with the 1st set (but not 2nd set) of test
tones during the ubuntu-bug submission process for this bug.
*** This bug is a duplicate of bug 1640662 ***
https://bugs.launchpad.net/bugs/1640662
I was having a similar issue when trying to install Libre-Office from
the Software Center on my new Lubuntu 17.04 machine. I installed snapd-
login-service via the terminal and that resolved my issue.
--
Drats-in attempting to see the actual commit changes (don't know my way
around launchpad) so I can apply changes to my server while waiting for
release, I accidentally changed master status to released and now it
won't let me change it back to fix committed.
I'm surprised it let me change it. I
I got this same problem on Ubuntu GNOME 17.10 64-bit when trying to run
the following in the terminal:
sudo apt update && sudo apt upgrade -y
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gconf in Ubuntu.
It is one device.
We have 2 luns for 2 different ocfs2 filesystems mounted on all servers
(6) in the cluster. It is presented via fiber channel from our SAN.
I think the issue is that if you run fstrim from all servers which are
mounting the same ocfs2 filesystem at the same time, bad stuff
Public bug reported:
Recently upgraded from trusty to xenial and found that our ocfs2
filesystems, which are mounted across a number of nodes simultaneously,
would become corrupt on the weekend:
[Sun Apr 9 06:46:35 2017] OCFS2: ERROR (device dm-2): ocfs2_validate_gd_self:
Group descriptor
** Changed in: nextcloud-snap
Importance: Unknown => High
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1647031
Title:
systemd-resolved’s 127.0.0.53 server
** Summary changed:
- I can't see the sunset and the sunrise time and neither the information about
the moon
+ No manual location setting causes scope issues
** Description changed:
+ NEW DESCRIPTION:
+
+ Some users want to be able to disable location (to save battery) and
+ they want to be
** Project changed: savilerow => canonical-scopes-project
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1404824
Title:
[Scopes] There is no way to uninstall a scope on
Dave - thanks.
My guess is this has nothing to do with the Today scope.
I guess is that there is something in the plumbing that does not handle
losing a network during a fresh - so I am glad that Michi is aware.
Regarding network, I wrote and attached here a test scope that displays
the scopes
Given my above experiences, and given that you do have elpais installed
and it may be enabled in your Today scope (can't see from your settings
image in comment #7), can you please:
Ensure that El Pais and holidays scopes are DISABLED in today scope
settings, and see if you can reproduce this?
twice now with elpais and holidays disabled in Today during refresh I
walked out of wifi range and *expected* resulted displayed [1]. Display
was not limited to Day scope.
Possibility: these child scopes do not handle loss of network during
refresh correctly. They should simply return from the
ok, with holiday scope disabled, I walk out of wifi range while a today scope
refresh is ongoing and I get similar results:
* only the Day scope displays
* but this time a different child scope displays the TimeoutExecption: elpais
[2016-11-03 17:12:03.323] ERROR:
by the way, issuing "restart scope-registry" brings holidays scope back
to life and fixes the today scope on refresh.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-api in
Ubuntu.
Noting the TimeoutException on holidays scope above, I've tried
launching holidays from Manage page. No results display.
running holidays scope from command line with scope-data tool I get this with
no displayed results:
phablet@ubuntu-phablet:~$ ./scope-data
After walking back into wifi range (on my second reproduction) and
refreshing Today scope, only Day scope displays (although it does
display normally).
The scope-reg.log contains this now reliably on refresh with only Day scope
showing:
[2016-11-03 16:56:46.984] INFO: Registry:
I was just able to produce a MiddelwareException twice by walking out of
range of my wifi while a Today scope refresh was in progress.
In both case the resulting display ONLY the Day scope.
In one case there was also a twitter scope panic/crash.
Attached my scope-reg.log
** Attachment added:
David H,
Assuming you have not modified any other parts of your rootfs, let's get
you the latest Today scope and see if you can reproduce any of the
issues, just to be sure.
Please install the attached and reboot (just to get the logs cleared)
and comment back with further info.
** Attachment
David H.
In one of your other bugs about Today scope display issues [1], I think
you mentioned that you made the rootfs "/" read-write (in order to
change the default scope background as I recall).
Doing this is inherently dangerous and can cause all kinds of problems
that are essentially
And provide the scope-registry.log if the issue is reproduceable with
that recent today scope. (I am interested to see if the
MiddlewareExecption occurs again).
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-api
Hi David H.
So, a few things which I will address in separate comments for clarity.
First, your scope-registry.log contains a
unity::scopes::MiddlewareException
[2016-11-02 17:04:35.351] ERROR:
com.canonical.scopes.dashboard_dashboard: ReplyImpl::error():
unity::scopes::MiddlewareException:
** Changed in: savilerow
Status: Triaged => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to click in Ubuntu.
https://bugs.launchpad.net/bugs/1322178
Title:
new armhf click build chroot is
This was fix released a long time ago.
I tested version com.canonical.scopes.photos-local_1.38_armhf.click in
clicks (which was in ota 13) and the photo rotated from gallery then
displays rotated in photos-local (My Photos) scope.
** Changed in: savilerow
Status: Fix Committed => Fix
Hi Bhaskara:
This issues does not seem to have anything to do with the facebook
scope.
I am re-assinging to the unity-scope-mediascanner project since that
provides the "Video" scope (which is not easy to figure out).
My guess is that the Video scope shows popular videos from YouTube and
Vimeo
Larry, thanks for your insight here.
Vladimir, it seems that either there was something wrong with your
CC.json file or with your container. So on that basis I'll mark this bug
invalid.
I is probably not a good idea to manually modify CC.json files. If I
understand correctly, all container
Vladimir: let's try uninstalling your desktop apps scope as follows:
phablet@ubuntu-phablet:~$ click list | grep libertine
libertine-scope.ubuntu 1.3.2.1
phablet@ubuntu-phablet:~$ sudo click unregister --user phablet
libertine-scope.ubuntu
[sudo] password for phablet:
(process:20113):
does this command list any libertine apps:
libertine-container-manager list-apps --json | grep name
phablet@ubuntu-phablet:~$ libertine-container-manager list-apps --json | grep
name
error processing
Nice work Vladimir!
Based on this, I will have removed Today scope from this bug and made
other top-level bug modifications.
Please, try installing the "Desktop Apps" scope as describe here:
https://bugs.launchpad.net/libertine-scope/+bug/1617545/comments/9
Please let me know the result here.
Vladimir: Great!
I meant to write "Apps" not "Desktop Apps" :( That is: you get to Manage
page from Apps (not from Desktop Apps). Sorry about that typo.
Anyway, it does *seem* that the problem is not caused by Today scope.
Let's continue and check if favoriting other scopes causes the same
Ah, now I understand: Today scope is the first scope displayed and you
are stuck there.
you can reset scope favorites like this:
phablet@ubuntu-phablet:~$ gsettings set com.canonical.Unity.Dash
favorite-scopes "['scope://clickscope']"
phablet@ubuntu-phablet:~$ restart unity8-dash
then today
-registry.log file mentioned above immediately and attached it
here - it may be some kind of uncaught exception.
Thanks a lot for your patience with all of this!
Cheers - Kyle
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8
Hi Vladimir:
I'd like to see if we can rule out the Today scope as the cause of
unity8-dash high CPU utilization.
So:
Swipe up from the bottom of the Desktop Apps scope to see the scopes
Manage page.
Ensure your day scope is NOT a favorite.
HOW: favorited scopes are listed in a special
Vladimir does unity8-dash have very high cpu usage even when Today scope
is not favorited and not launched?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1626180
Title:
if you have this issue, you can also try this. If it works, please
comment the result here:
$ stop unity8-dash
$ sudo rm -f /var/crash/*
$ rm -Rf ~/.cache/QML
$ start unity8-dash
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed
Vladimir: your best bet for liberitne questions is freenode channel
#ubuntu-libertine
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1626180
Title:
Today Scope not
Vladimir - thanks. I've just added unity8 to the bug based on the
exception (even though it is caught). we will have to see what they
think.
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
And an annotated pastebin of the unity8-dash log:
https://pastebin.canonical.com/165995/
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1622423
Title:
My
Just noting that another bug relates to the link to child, which may be
a display issue: https://bugs.launchpad.net/today-scope/+bug/1508905
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
Hi Pawel, Per our irc conversation, this is the link-to-child bug I was
referring to. See comment #9 particularly.Thanks for your input.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
Some debug info:
I've attached a debug version of the today scope that only aggregates
twitter and fitbit.
After installing, find it in Manage with this title "FLToday".
Starting condition:
* disable twitter in this agg scope from settings
* disable your login to fitbit account in settings >
** Changed in: unity8 (Ubuntu)
Status: Expired => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1508905
Title:
Graphics disorder, a "claw" appearing
** Changed in: today-scope
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1546733
Title:
Update of today screen messes up scopes
This is my fist post, so i could forget something.
Version :
-Version-
Kernel : Linux 4.4.0-34-generic (x86_64)
Compiled: #53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016
C Library : Unknown
Default C Compiler : GNU C Compiler version 5.4.0 20160609
Public bug reported:
When I start mousepad in a terminal, I have this warning :
** (mousepad:25021): WARNING **: Couldn't connect to accessibility bus:
Failed to connect to socket /tmp/dbus-5pX3Lo3SAH: Connexion refusée
When I start it with GKSU, the warning is not displayed.
** Affects:
The log exceptions are due to handling cases where the incoming result
lacks art in the expected result attribute and we attempt to check other
result attributes to find it. This code was trying to access a result
attribute that did not exist in some cases and threw and execption.
--
You
filed bug 1599948 for the el pais related exception.
** No longer affects: canonical-scopes-project
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1599754
Seems the el pais related exception is not required for the core
symptom. I just simply rebooted and refreshed the news scope twice (with
el pais disabled in news). I saw no exceptions in the scope-
registry.log, but the hang on a long refresh followed by dash restart
did occur.
--
You received
I find that the el pais scope reliably causes the log error in comment
#1 in both news scope and in today scope (dashboard).
Disabling el pais in both fixes it (no more exceptions).
** Also affects: canonical-scopes-project
Importance: Undecided
Status: New
** Changed in:
Public bug reported:
On this system [1], installed with --bootstrap, I allowed all location
related bits as prompted.
But, when I looked in a scope (for example NearBy), I found that the
scope did not have a location and that the Enable Location settings
normally present in scopes was not
This seems like a unity problem. Adding unity8 to the bug.
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
Searching by filename was never supported in My Photos scope. (Searching
by date is)
** Changed in: photos-scope
Status: Incomplete => Invalid
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Hi Albert.
Check this
https://developer.ubuntu.com/api/scopes/cpp/sdk-15.04.4/unity.scopes.CategoryRenderer/
Search for "collapsed", you will find:
"
collapsed-rows Number of result rows displayed while the category is collapsed;
possible values: any non-negative integer, where 0 fully expands
I saw this happen too.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1593035
Title:
Scope category layout: vertical-journal does not follow the value of
collapsed-rows
Public bug reported:
Installing ubuntu-desktop from standard repositories led to package
conflicts with the account-plugin-facebook package from KDE.
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: account-plugin-facebook (not installed)
ProcVersionSignature: Ubuntu 4.4.0-24.43-generic
Public bug reported:
Just checking to see if there are known issues after a fresh install.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg 1:7.7+13ubuntu3
ProcVersionSignature: Ubuntu 4.4.0-22.39-generic 4.4.8
Uname: Linux 4.4.0-22-generic x86_64
NonfreeKernelModules: wl
Pretty sure this is not a scope implementation bug.
Scopes just get their location passed in from unity-scope-shell.
I notice that nearby scope shows the gps derived precise location, and
that scope uses the same shared object as the today scope, so when an
agg scope (today, nearby, news,
Public bug reported:
OTA10:
I find that on tapping Cancel after entering a search query, the scope's
run() method executes twice.
For example: calls-scope always prints "CALLS starting" on entering
run().
While watching scope-registry.log:
(launch or refresh calls-scope)
CAllS starting
(enter
Hi unity8, what OTA is needed for scopes to auto rotate?
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1573996
Title:
Scopes can get confused and
I pulled the latest translations and have rebuilt as 1.5 for release in
ota11.
** Tags added: ota11
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1429548
Thanks Pawel :) .
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1471914
Title:
Scope search queries don't persist departments
Status in unity-scope-click
Hi Wolfgang,
That video is private on youtube.
Cheers
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1544957
Title:
Scrolling is not smooth
Status in
Hi Henrik,
Thanks for filing. This is most likely a duplicate of a unity8, so I
will add unity8 task and let them mark as duplicate (or not).
I have a:
current build number: 305
device name: krillin
channel: ubuntu-touch/rc-proposed/bq-aquaris.en
And I am not able to reproduce :(
** Also
** Tags added: ota11
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1569492
Title:
can't select primary nav filter sometimes
Status in canonical-scopes-project:
New
As discussed in our hangout, my understanding (about which I am not 100%
certain) is that only an option selector filter set to single select can
be the primary navigation. So, when the user selects a new option, the
widget & overlay should disappear (just as it does with departments).
--
You
Hi Albert,
I set this to New again in unity8 because I am not 100% sure you are
correct.
For example the News Scope has departments. When you select a
department, the department selection gui disappears and the new
department results display. But not in the case of the option filter as
primary
** Changed in: today-scope
Status: New => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1539446
Title:
Today scope hangs-on after OTA9 update
Status in
** Changed in: savilerow
Status: Triaged => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mediascanner2 in Ubuntu.
https://bugs.launchpad.net/bugs/1468585
Title:
the photo which in photo scope the
** Changed in: savilerow
Status: Triaged => Confirmed
** Changed in: savilerow
Status: Confirmed => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
** Changed in: savilerow
Status: New => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1537139
Title:
Selecting new dept should cancel current
Public bug reported:
When you are using an option filter as the primary navigation widget,
usually dismissing the filter widget by tapping results causes a result
preview to display, but the user really wants to see all results and
only dismiss the filter overly.
You can see this in the attached
Public bug reported:
One sometimes cannot select the lowest options in an option select
filter when it is the primary navigation widget for the scope.
Here's a case.
Using the attached fake 500px scope:
1) Enter a query string (wait 30 seconds for the query to complete -- FYI this
takes a long
*** This bug is a duplicate of bug 1546733 ***
https://bugs.launchpad.net/bugs/1546733
marking as duplicate of 1546733 to simplify bug tracking then.
** This bug has been marked a duplicate of bug 1546733
Update of today screen messes up scopes layout.
--
You received this bug
Hi,
Thanks for reporting this.
Michal's report supports the idea that this is not related to an
individual scope but is related to unity8, so I am adding this task to
the bug.
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification
I'm still getting the issue here, except in my case the corners are
white instead of black.
** Attachment added: "GNOME Calendar white corners in Ambiance under Unity"
https://bugs.launchpad.net/unity/+bug/1516403/+attachment/4633176/+files/Screenshot%20from%202016-04-11%2016-52-14.png
--
Thanks for testing that.
Very interesting that Holidays scope shows the message "Location data
must be enabled" even when you location data turned on.
This could either be a bug in the holidays scope (it has location data
but it does not think it does), or perhaps the location data passed to
the
Public bug reported:
There is no ability to change the current department from code. This
means that the scope cannot "do the right thing" when a user enters a
query string in some cases.
For example, suppose a scope has departments that represent a web api's
departments. And suppose the web api
Can either of you take a video of the behavior and attach it?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity-scopes-shell in
Ubuntu.
https://bugs.launchpad.net/bugs/1544957
Title:
Scrolling is not smooth
Status in
1 - 100 of 308 matches
Mail list logo