Hi Stephen,
> -Original Message-
> From: Stephen Warren [mailto:swar...@wwwdotorg.org]
> Sent: 2016年9月21日 5:15
> To: Wenyou Yang - A41535
> Cc: U-Boot Mailing List ; Stephen Warren
>
> Subject: Re: [U-Boot] [PATCH v2]
Hi Masahiro
On 09/21/2016 12:59 PM, Masahiro Yamada wrote:
> Hi Jaehoon,
>
>
> 2016-08-30 18:40 GMT+09:00 Jaehoon Chung :
>> Hi Masahiro,
>>
>> On 08/25/2016 04:07 PM, Masahiro Yamada wrote:
>>> Changes in v2:
>>> - Adjust comment block
>>>
>>> Masahiro Yamada (6):
>>>
Hi Jaehoon,
2016-08-30 18:40 GMT+09:00 Jaehoon Chung :
> Hi Masahiro,
>
> On 08/25/2016 04:07 PM, Masahiro Yamada wrote:
>> Changes in v2:
>> - Adjust comment block
>>
>> Masahiro Yamada (6):
>> mmc: sdhci: move sdhci_reset() call to sdhci_init()
>> mmc: sdhci: move
Tom and Simon,
After commit 371244cb19f9804711dd66e4281ff7979915fd2e, all merges with
new macros defined will have the compiling error. How shall we fix it?
Some macros can be added to Kconfig. But some are for local use, better
than magic numbers. Adding them to the white-list doesn't sound
Move USB_XHCI_ROCKCHIP define from soc header file into board defconfig.
Signed-off-by: Kever Yang
---
configs/evb-rk3399_defconfig| 2 ++
include/configs/rk3399_common.h | 4
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git
New config option must using Kconfig, move USB_XHCI_ROCKCHIP into
Kconfig to follow the rule.
Kever Yang (2):
usb: host: add Kconfig for USB_XHCI_ROCKCHIP
rk3399: move the USB_XHCI_ROCKCHIP into Kconfig
configs/evb-rk3399_defconfig| 2 ++
drivers/usb/host/Kconfig| 7 +++
Add a Kconfig for Rockchip xhci controller.
Signed-off-by: Kever Yang
---
drivers/usb/host/Kconfig | 7 +++
1 file changed, 7 insertions(+)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index e0699d4..afb2e97 100644
---
Hi Sandy,
On 09/20/2016 09:21 PM, Sandy Patterson wrote:
You're probably going to need to change this around now that the
Kconfig stuff has been applied to master. Suggest following patch instead:
I didn't enable the BACK_TO_BROM for all of rk3288 board, because boards
like firefly and
Hi Sandy,
On 09/20/2016 11:04 PM, Sandy Patterson wrote:
I can confirm that this boots on rock2 with current master branch.
9b1b6d42256a4c2e59c803afdbf90d39371e61ba
Thanks for your test.
It doesn't boot for me using rock2 on v2016.09 tag. I get:
U-Boot SPL 2016.09-2-g690a8a3 (Sep 20
Is it possible to persist data across a reset for my own purposes (a
counter that u-boot could increment if it fails to load the linux
kernel, and check before it attempts to load the kernel), perhaps I can use
an environment variable?
I'm not on one of the Power processors that supports the boot
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content. (both just wrap )
Replace all include directives for with .
Signed-off-by: Masahiro Yamada
---
arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
First, my motivation was to add reset control to
drivers/usb/host/ehci-generic.
I found build errors because the reset framework does not have
no-op stubs for !CONFIG_DM_RESET case.
When I was adding ENOTSUPP to include/reset.h, I noticed this macro
define is sitting in include/linux/compat.t,
First, my motivation was to add reset control to
drivers/usb/host/ehci-generic.
I found build errors because the reset framework does not have
no-op stubs for !CONFIG_DM_RESET case.
When I was adding ENOTSUPP to include/reset.h, I noticed this macro
define is sitting in include/linux/compat.t,
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content. (both just wrap )
Replace all include directives for with .
Signed-off-by: Masahiro Yamada
---
arch/arm/cpu/arm1136/mx35/generic.c | 2 +-
On Tue, Sep 20, 2016 at 09:26:15AM -0500, Andrew F. Davis wrote:
> On 09/20/2016 12:50 AM, Heiko Schocher wrote:
> > Hello Andrew,
> >
> > Am 19.09.2016 um 18:03 schrieb Andrew F. Davis:
> >> BTW, the following addresses that bounce should be removed from wherever
> >> you found them or added to
My motivation for this patch is to make reset control handling
optional for generic drivers.
I want to add reset control to drivers/usb/host/ehci-generic.c,
but it is used by several platforms, some will implement a reset
controller driver, some will not.
Add no-op stubs in order to avoid link
Unlike Linux, nothing about errno.h is arch-specific in U-Boot.
As you see, all of arch/${ARCH}/include/asm/errno.h is just a
wrapper of . Actually, U-Boot does not
export headers to user-space, so we just have to care about the
consistency in the U-Boot tree.
Now all of include directives for
Now, include/linux/errno.h is a wrapper of .
Replace all include directives for with
.
is supposed to be included from when
arch-headers fall back into generic implementation. Generally, they
should not be directly included from .c files.
Signed-off-by: Masahiro Yamada
For synchronization, import macros from
- include/uapi/asm-generic/errno-base.h
- include/uapi/asm-generic/errno.h
- include/linux/errno.h
of Linux 4.8-rc7.
Signed-off-by: Masahiro Yamada
---
include/linux/errno.h | 57
There are no files that include any more.
Move error macro defines to include/linux/errno.h and remove
include/asm-generic/errno.h.
Going forward, please include when you need error
macros.
Signed-off-by: Masahiro Yamada
---
include/asm-generic/errno.h | 139
This will be used to consolidate errno.h variants.
Signed-off-by: Masahiro Yamada
---
include/linux/errno.h | 6 ++
1 file changed, 6 insertions(+)
create mode 100644 include/linux/errno.h
diff --git a/include/linux/errno.h b/include/linux/errno.h
new file
This driver is designed in a generic manner, so resets should be
handled generically as well.
Signed-off-by: Masahiro Yamada
---
drivers/usb/host/ehci-generic.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/host/ehci-generic.c
Collect a couple of duplicated defines into a single place.
Signed-off-by: Masahiro Yamada
---
drivers/usb/gadget/rndis.c | 2 --
include/linux/compat.h | 2 --
include/linux/errno.h | 2 ++
include/usb/lin_gadget_compat.h | 2 --
4 files
We are supposed to use #include <...> to include headers in the
public include paths. We should use #include "..." only for headers
in local directories.
Signed-off-by: Masahiro Yamada
---
arch/powerpc/cpu/mpc83xx/qe_io.c | 8
Adding new handoff for SDRAM ctrcfg.extratime1 which is
required for stable LPDDR2 operation. Since the board is
using DDR3, the handoff is set to default value 0.
Signed-off-by: Chin Liang See
Cc: Marek Vasut
Cc: Dinh Nguyen
---
Adding new handoff for SDRAM ctrcfg.extratime1 which is
required for stable LPDDR2 operation. Since the board is
using DDR3, the handoff is set to default value 0.
Signed-off-by: Chin Liang See
Cc: Marek Vasut
Cc: Dinh Nguyen
---
Adding new handoff for SDRAM ctrcfg.extratime1 which is
required for stable LPDDR2 operation. Since the board is
using DDR3, the handoff is set to default value 0.
Signed-off-by: Chin Liang See
Cc: Marek Vasut
Cc: Dinh Nguyen
---
Adding new handoff for SDRAM ctrcfg.extratime1 which is
required for stable LPDDR2 operation. Since the board is
using DDR3, the handoff is set to default value 0.
Signed-off-by: Chin Liang See
Cc: Marek Vasut
Cc: Dinh Nguyen
---
Adding new handoff for SDRAM ctrcfg.extratime1 which is
required for stable LPDDR2 operation. Since the board is
using DDR3, the handoff is set to default value 0.
Signed-off-by: Chin Liang See
Cc: Marek Vasut
Cc: Dinh Nguyen
---
Adding new handoff for SDRAM ctrcfg.extratime1 which is
required for stable LPDDR2 operation. Since the board is
using DDR3, the handoff is set to default value 0.
Signed-off-by: Chin Liang See
Cc: Marek Vasut
Cc: Dinh Nguyen
---
Adding new handoff for SDRAM ctrcfg.extratime1 which is
required for stable LPDDR2 operation. Since the board is
using DDR3, the handoff is set to default value 0.
Signed-off-by: Chin Liang See
Cc: Marek Vasut
Cc: Dinh Nguyen
---
Adding new handoff for SDRAM ctrcfg.extratime1 which is
required for stable LPDDR2 operation. Since the board is
using DDR3, the handoff is set to default value 0.
Signed-off-by: Chin Liang See
Cc: Marek Vasut
Cc: Dinh Nguyen
---
To enable configuration of sdr.ctrlcfg.extratime1 register which enable
extra clocks for read to write command timing. This is critical to
ensure successful LPDDR2 interface
Signed-off-by: Chin Liang See
Cc: Marek Vasut
Cc: Dinh Nguyen
There are no files that include any more.
Move error macro defines to include/linux/errno.h and remove
include/asm-generic/errno.h.
Going forward, please include when you need error
macros.
Signed-off-by: Masahiro Yamada
---
include/asm-generic/errno.h | 139
This driver is designed in a generic manner, so resets should be
handled generically as well.
Signed-off-by: Masahiro Yamada
---
drivers/usb/host/ehci-generic.c | 13 +
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/host/ehci-generic.c
Unlike Linux, nothing about errno.h is arch-specific in U-Boot.
As you see, all of arch/${ARCH}/include/asm/errno.h is just a
wrapper of . Actually, U-Boot does not
export headers to user-space, so we just have to care about the
consistency in the U-Boot tree.
Now all of include directives for
Collect a couple of duplicated defines into a single place.
Signed-off-by: Masahiro Yamada
---
drivers/usb/gadget/rndis.c | 2 --
include/linux/compat.h | 2 --
include/linux/errno.h | 2 ++
include/usb/lin_gadget_compat.h | 2 --
4 files
For synchronization, import macros from
- include/uapi/asm-generic/errno-base.h
- include/uapi/asm-generic/errno.h
- include/linux/errno.h
of Linux 4.8-rc7.
Signed-off-by: Masahiro Yamada
---
include/linux/errno.h | 57
My motivation for this patch is to make reset control handling
optional for generic drivers.
I want to add reset control to drivers/usb/host/ehci-generic.c,
but it is used by several platforms, some will implement a reset
controller driver, some will not.
Add no-op stubs in order to avoid link
Now, include/linux/errno.h is a wrapper of .
Replace all include directives for with
.
is supposed to be included from when
arch-headers fall back into generic implementation. Generally, they
should not be directly included from .c files.
Signed-off-by: Masahiro Yamada
On Wed, 2016-09-21 at 03:20 +0200, Marek Vasut wrote:
> On 09/20/2016 08:05 AM, Chin Liang See wrote:
> > To enable configuration of sdr.ctrlcfg.extratime1 register which
> > enable
> > extra clocks for read to write command timing. This is critical to
> > ensure successful LPDDR2 interface
> >
>
On 09/20/2016 08:05 AM, Chin Liang See wrote:
> To enable configuration of sdr.ctrlcfg.extratime1 register which enable
> extra clocks for read to write command timing. This is critical to
> ensure successful LPDDR2 interface
>
> Signed-off-by: Chin Liang See
> Cc: Marek Vasut
On 09/20/2016 11:13 AM, Chin Liang See wrote:
> On Tue, 2016-09-20 at 09:52 +0200, Marek Vasut wrote:
>> On 09/20/2016 07:37 AM, Chin Liang See wrote:
>>> On Mon, 2016-09-19 at 20:52 +0200, Marek Vasut wrote:
On 09/19/2016 12:12 PM, Chin Liang See wrote:
> On Mon, 2016-09-19 at 16:24
On 09/20/2016 07:50 AM, Chin Liang See wrote:
> On Mon, 2016-09-19 at 20:54 +0200, Marek Vasut wrote:
>> On 09/19/2016 12:11 PM, Chin Liang See wrote:
>>> On Mon, 2016-09-19 at 16:22 +0200, Marek Vasut wrote:
On 09/15/2016 09:26 AM, Chin Liang See wrote:
> To enable configuration of
On 09/19/2016 09:59 PM, macro.wav...@gmail.com wrote:
> From: Hongbo Zhang
>
> ARMV7_PSCI depends on ARMV7_NONSEC && ARCH_SUPPORT_PSCI, and ARMV7_NONSEC
> depends on CPU_V7_HAS_NONSEC, LS102XA didn't enable CPU_V7_HAS_NONSEC, but
> defined ARMV7_NONSEC in a internal header
On Wed, Sep 21, 2016 at 01:52:21AM +0200, Ladislav Michl wrote:
> On Tue, Sep 20, 2016 at 07:45:14PM -0400, Tom Rini wrote:
> > On Wed, Sep 21, 2016 at 12:44:17AM +0200, Ladislav Michl wrote:
> [snip]
> > > Gah... I have to screw it up while resolving conflicts with upstream
> > > changes.
> > >
On Tue, 2016-09-20 at 09:52 +0200, Marek Vasut wrote:
> On 09/20/2016 07:37 AM, Chin Liang See wrote:
> > On Mon, 2016-09-19 at 20:52 +0200, Marek Vasut wrote:
> > > On 09/19/2016 12:12 PM, Chin Liang See wrote:
> > > > On Mon, 2016-09-19 at 16:24 +0200, Marek Vasut wrote:
> > > > > On 09/15/2016
On Tue, Sep 20, 2016 at 07:45:14PM -0400, Tom Rini wrote:
> On Wed, Sep 21, 2016 at 12:44:17AM +0200, Ladislav Michl wrote:
[snip]
> > Gah... I have to screw it up while resolving conflicts with upstream
> > changes.
> > Obviously MACH_TYPE has to remain the same. Will do v2. I'm sorry for that.
On Wed, Sep 21, 2016 at 12:44:17AM +0200, Ladislav Michl wrote:
> On Tue, Sep 20, 2016 at 08:52:21AM -0400, Tom Rini wrote:
> > On Tue, Sep 20, 2016 at 11:07:57AM +0200, Ladislav Michl wrote:
> > > Update defconfigs and drop NAND specific defconfig as flash type
> > > is runtime detected.
> > >
>
Hi Enric,
On Tue, Sep 20, 2016 at 05:41:02PM +0200, Enric Balletbo Serra wrote:
> Hi Ladis,
>
> I must NACK for now these series, meanwhile I don't find time to look
> at this deeply. I think this will break lots of things. For example,
> will this u-boot boot a non-device tree based kernel
On 09/20/2016 12:55 PM, york@nxp.com wrote:
> On 09/20/2016 12:30 PM, Tom Rini wrote:
>> On Tue, Sep 20, 2016 at 06:09:47PM +, york sun wrote:
>>
>>> Tom,
>>>
>>> The following changes since commit
>>> 8cbb389bb3da80cbf8911f8386cbff92c6a78afe:
>>>
>>>Prepare v2016.09 (2016-09-12
On Tue, Sep 20, 2016 at 08:52:21AM -0400, Tom Rini wrote:
> On Tue, Sep 20, 2016 at 11:07:57AM +0200, Ladislav Michl wrote:
> > Update defconfigs and drop NAND specific defconfig as flash type
> > is runtime detected.
> >
> > Signed-off-by: Ladislav Michl
> > ---
> >
On 08/02/2016 04:14 AM, Zhiqiang Hou wrote:
> From: Hou Zhiqiang
>
> Up to now, the function is_serdes_configed() doesn't check if the map
> of serdes protocol is initialized before accessing it. The function
> is_serdes_configed() will get wrong result when it was called
On Tue, Sep 20, 2016 at 09:40:00PM +, york sun wrote:
> On 09/20/2016 02:36 PM, Tom Rini wrote:
> > On Tue, Sep 20, 2016 at 09:22:09PM +, york sun wrote:
> >
> >> Tom and Simon,
> >>
> >> After commit 371244cb19f9804711dd66e4281ff7979915fd2e, all merges with
> >> new macros defined will
On 09/20/2016 12:30 PM, Tom Rini wrote:
> On Tue, Sep 20, 2016 at 06:09:47PM +, york sun wrote:
>
>> Tom,
>>
>> The following changes since commit 8cbb389bb3da80cbf8911f8386cbff92c6a78afe:
>>
>>Prepare v2016.09 (2016-09-12 10:05:51 -0400)
>>
>> are available in the git repository at:
>>
>>
On 09/20/2016 02:36 PM, Tom Rini wrote:
> On Tue, Sep 20, 2016 at 09:22:09PM +, york sun wrote:
>
>> Tom and Simon,
>>
>> After commit 371244cb19f9804711dd66e4281ff7979915fd2e, all merges with
>> new macros defined will have the compiling error. How shall we fix it?
>> Some macros can be added
On 08/19/2016 02:20 AM, macro.wav...@gmail.com wrote:
> From: Hongbo Zhang
>
> The v7_flush_dcache_all function will be called by ls102xa platform system
> suspend, it is necessary to make it a public call instead of a local one, but
> changing the LENTRY to ENTRY isn't
On Tue, Sep 20, 2016 at 09:22:09PM +, york sun wrote:
> Tom and Simon,
>
> After commit 371244cb19f9804711dd66e4281ff7979915fd2e, all merges with
> new macros defined will have the compiling error. How shall we fix it?
> Some macros can be added to Kconfig. But some are for local use,
On 08/26/2016 03:42 AM, Shengzhou Liu wrote:
> DDR erratum A008336 only applies to DDR controller v5.2.0.
> DDR controller v5.2.1 already has default 0x43b30002 in
> EDDRTQCR1 register for optimal performance.
>
> Signed-off-by: Shengzhou Liu
> ---
Applied to fsl-qoriq
On 09/18/2016 12:53 AM, Wenyou Yang wrote:
For the peripheral clock, provide the clock ops for the clock
provider, such as spi0_clk. The .of_xlate is to get the clk->id,
the .enable is to enable the spi0 peripheral clock, the .get_rate
is to get the clock frequency.
The driver for periph32ck
On 09/19/2016 09:05 PM, Wenyou Yang wrote:
Add the driver model support for Atmel mci while retaining the
existing legacy code. This allows the driver to support boards
that have converted to driver model as well as those that have not.
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
From: Jagan Teki
Add CONFIG_SPI_FLASH_USE_4K_SECTORS in spi_flash code from header file.
Cc: Simon Glass
Cc: Bin Meng
Cc: Michal Simek
Cc: Siva Durga Prasad Paladugu
Cc: Vignesh R
From: Jagan Teki
This patch moves flags macro's to respective member position on
spi_flash_params{}, for better readabilty and finding the
respective member macro's easily.
Cc: Simon Glass
Cc: Bin Meng
Cc: Michal Simek
From: Jagan Teki
SECT_32K never used anywhere in the code.
Cc: Simon Glass
Cc: Bin Meng
Cc: Michal Simek
Cc: Siva Durga Prasad Paladugu
Cc: Vignesh R
Cc: Mugunthan V N
From: Jagan Teki
Removed SPI_RX_FAST since default read for spi slaves
are always 1-wire fast read.
Cc: Simon Glass
Cc: Bin Meng
Cc: Michal Simek
Cc: Siva Durga Prasad Paladugu
Cc:
From: Jagan Teki
Make rx mode flags as generic to spi, earlier mode_rx is
maintained separately because of some flash specific code.
Cc: Simon Glass
Cc: Bin Meng
Cc: Michal Simek
Cc: Siva Durga Prasad
From: Jagan Teki
Fastest read command code look for fastest read command
taking inputs from spi->mode_rx and flags from param table
and controller mode_rx is always been a priority.
Since mode_rx is always set from controller side this optimized
code doesn't require much and
From: Jagan Teki
e_rd_cmd is maintained separately for fastest read command code,
since the read commands are computed normally this e_rd_cmd
is not required in spi_flash_params table.
Cc: Simon Glass
Cc: Bin Meng
Cc: Michal Simek
On 09/18/2016 01:37 AM, Wenyou Yang wrote:
Fix the warning from dtc like,
---8<
Warning (unit_address_vs_reg): Node
/ahb/apb/pmc@f0014000/periph64ck/sdmmc0_hclk has a reg or ranges property, but
no unit name
--->8
Acked-by: Stephen Warren
I think this same
This series is the spilt one of v3 "spi/sf: Update on flash detection" [1]
and deals with Code remove and update.
Changes for v3:
- New patches
- Fix checkpatch.pl
- Fix BIT positions in spi.h
- Fix ti_qspi.c mode
- Fix commit Nit: s/becuase/because
On Wed, Sep 14, 2016 at 07:03:06AM +0200, Heiko Schocher wrote:
> move the UBI config options into Kconfig.
>
> Signed-off-by: Heiko Schocher
> ---
> Tested with tbot:
> http://lists.denx.de/pipermail/u-boot/2016-June/258119.html
>
> result:
> Boards : 1196
> compile err : 36
Hi Stephen
Cool, it's all working again. You saved my day!
Tegra20 (Harmony) # usb tree
USB device tree:
1 Hub (480 Mb/s, 0mA)
u-boot EHCI Host Controller
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (12 Mb/s, 94mA)
| Broadcom BCM2046B1
|
On Tue, Sep 20, 2016 at 06:09:47PM +, york sun wrote:
> Tom,
>
> The following changes since commit 8cbb389bb3da80cbf8911f8386cbff92c6a78afe:
>
>Prepare v2016.09 (2016-09-12 10:05:51 -0400)
>
> are available in the git repository at:
>
>git://git.denx.de/u-boot-fsl-qoriq.git
>
>
On Sun, Sep 18, 2016 at 09:09:46PM -0600, Simon Glass wrote:
> Hi Tom,
>
> Here is some more RK3399 support and a few other changes.
>
>
> The following changes since commit 9a6535e05f17acf03e891266a650cb6029124743:
>
> Merge branch 'master' of git://git.denx.de/u-boot-uniphier
>
On 09/01/2016 03:36 AM, Sumit Garg wrote:
> sec_init() which was earlier called in misc_init_r()
> is now done in board_init() before PPA init as SEC
> block will be used during PPA image validation.
>
> Signed-off-by: Aneesh Bansal
> Signed-off-by: Sumit Garg
On 09/01/2016 12:02 AM, Shengzhou Liu wrote:
> Signed-off-by: Shengzhou Liu
> ---
Applied to fsl-qoriq master. Awaiting upstream. Thanks.
York
___
U-Boot mailing list
U-Boot@lists.denx.de
On 09/01/2016 03:36 AM, Sumit Garg wrote:
> As part of Secure Boot Chain of trust, PPA image must be validated
> before the image is started.
> The code for the same has been added.
>
> Signed-off-by: Aneesh Bansal
> Signed-off-by: Sumit Garg
> ---
>
>
Tom,
The following changes since commit 8cbb389bb3da80cbf8911f8386cbff92c6a78afe:
Prepare v2016.09 (2016-09-12 10:05:51 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 126fe70d7746d7e60a6331391cab6713368b78dc:
On 09/01/2016 11:26 PM, Gong Qianyu wrote:
> The current code would always use the speed and mode set by
> CONFIG_ENV_SPI_MAX_HZ and CONFIG_ENV_SPI_MODE. But if using
> SPI driver model it should get the values from DT.
>
> Signed-off-by: Gong Qianyu
> Reviewed-by: Jagan Teki
On 08/29/2016 02:16 AM, Shengzhou Liu wrote:
> From: York Sun
>
> 32 more debug registers are added for newer DDR controllers.
>
> Signed-off-by: York Sun
> Signed-off-by: Shengzhou Liu
> ---
Applied to fsl-qoriq master. Awaiting
On 09/07/2016 03:08 AM, Gong Qianyu wrote:
> Hi all,
>
> This is version 6 patchset mainly to add support for both LS1046ARDB
> board.
> It should be based on two DDR patches to work well on LS1046ARDB or
> LS1046AQDS.
> The two patches are:
> http://patchwork.ozlabs.org/patch/663534/
>
On 08/26/2016 03:42 AM, Shengzhou Liu wrote:
> This general MMDC driver adds basic support for Freescale MMDC
> (Multi Mode DDR Controller). Currently MMDC is integrated on ARMv8
> LS1012A SoC for DDR3L, there will be a update to this driver to
> support more flexible configuration if new features
On 08/03/2016 12:33 PM, York Sun wrote:
> Debug server feature has been dropped from roadmap.
>
> Signed-off-by: York Sun
> ---
Applied to fsl-qoriq master. Awaiting upstream.
York
___
U-Boot mailing list
U-Boot@lists.denx.de
On 08/29/2016 02:16 AM, Shengzhou Liu wrote:
> From: York Sun
>
> DDR controller 5.2.1 has this erratum A008511 partially fixed.
> The workaround needs to be adjusted to take advantage of Vref
> training. This patch enables the training and force output
> enable to be off.
>
>
Commit bac17b78dace ("image-fit: switch ENOLINK to ENOENT") changed
fit_get_node_from_config to return -ENOENT when a property doesn't
exist, but didn't change any of its callers which check return values.
Notably it didn't change boot_get_ramdisk, which leads to U-Boot failing
to boot FIT images
On Mon, Sep 19, 2016 at 2:01 PM, Tom Rini wrote:
> I've poked Wolfgang about why these aren't migrating over to the public
> git side, but they are available on the github mirror.
Wolfgang?
___
U-Boot mailing list
From: Hannes Schmelzer
Sometimes devicetree nodes and or properties are added out of the u-boot
console, maybe through some script or manual interaction.
The devicetree as loaded or embedded is quite small, so the devicetree
has to be resized to take up those
On 09/19/2016 07:35 AM, Julian Scheel wrote:
On 12.09.2016 18:54, Stephen Warren wrote:
On 09/12/2016 08:03 AM, Julian Scheel wrote:
On 06.09.2016 19:15, Stephen Warren wrote:
diff --git a/board/avionic-design/common/meerkat.c
b/board/avionic-design/common/meerkat.c
+void pinmux_init(void)
Update amcore board to use dm serial driver.
Signed-off-by: Angelo Dureghello
---
Changes for v2:
- None
---
board/sysam/amcore/amcore.c | 15 ++-
configs/amcore_defconfig| 4
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git
Add some useful update scripts.
Signed-off-by: Angelo Dureghello
---
Changes for v2:
- Fix syntax error on upgrade_jffs2 script
---
include/configs/amcore.h | 13 -
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/include/configs/amcore.h
Hi Chris,
On 19.09.2016 03:28, Chris Packham wrote:
On Mon, Sep 19, 2016 at 12:58 PM, Simon Glass wrote:
Hi Chris,
On 13 September 2016 at 19:42, Chris Packham wrote:
This board is a plug in card for Marvell's switch system development
kits.
Hi Ladis,
2016-09-20 11:04 GMT+02:00 Ladislav Michl :
> As a single U-Boot binary can now run on various board modifications,
> drop CONFIG_DISPLAY_BOARDINFO as there's no known way to distinguish
> between them. Also saves few bytes as a bonus.
>
> Signed-off-by: Ladislav
When waiting for input in CYGACC_COMM_IF_GETC_TIMEOUT we delay 2
seconds by incrementing and checking a counter variable every 20
uSeconds. The overhead in the loop calling tstc() thousands of times
causes the timeout to be closer to 20 seconds. Delay longer per iteration
to reduce overhead and
On 08/26/2016 08:43 AM, Stefan Roese wrote:
> Hi Andrew,
>
> On 26.08.2016 15:40, Andrew F. Davis wrote:
>> On 08/26/2016 12:18 AM, Stefan Roese wrote:
>>> On 25.08.2016 20:43, Andrew F. Davis wrote:
When waiting for input in CYGACC_COMM_IF_GETC_TIMEOUT we delay 2
seconds by
Hi Walter,
On 06.09.2016 23:34, Walter Schweizer wrote:
> Synology DS109 is based on MV88F6281. The code
> is based on Dreamplug code with modificatons
> from Synologys open source repository.
>
> Signed-off-by: Walter Schweizer
> ---
I'm trying to apply your
I can confirm that this boots on rock2 with current master branch.
9b1b6d42256a4c2e59c803afdbf90d39371e61ba
It doesn't boot for me using rock2 on v2016.09 tag. I get:
U-Boot SPL 2016.09-2-g690a8a3 (Sep 20 2016 - 10:47:44)
Trying to boot from MMC1
It continues to detect 2GB of ram. on master.
On 09/20/2016 12:50 AM, Heiko Schocher wrote:
> Hello Andrew,
>
> Am 19.09.2016 um 18:03 schrieb Andrew F. Davis:
>> BTW, the following addresses that bounce should be removed from wherever
>> you found them or added to .get_maintainer.ignore if they are part of
>> old commits:
>>
>> Bo Shen
On 09/20/2016 12:26 AM, Heiko Schocher wrote:
> Hello Andrew,
>
> Am 19.09.2016 um 17:38 schrieb Andrew F. Davis:
>> On 09/14/2016 12:03 AM, Heiko Schocher wrote:
>>> move the UBI config options into Kconfig.
>>>
>>> Signed-off-by: Heiko Schocher
>>> ---
>>> Tested with tbot:
>>>
You're probably going to need to change this around now that the Kconfig
stuff has been applied to master. Suggest following patch instead:
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 1aac3c8..dc471d6 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++
>
> 1) It seems the BACK_TO_BROM feature is broken. It doesn't boot using the
>> 2016.09. I'm afraid I don't have the time to track it down.
>>
> It works fine on my evb, do you flash the image correctly? it's different
> with the way you don't use BACK_TO_BROM.
>
Well, I tested again on the
1 - 100 of 130 matches
Mail list logo