bpa wrote:
> More investigation is needed.
I tried to compare the behavior with the playback of a remote file from
the audio archive of Slovak Radio (RTVS). LMS plays back these files
without any problem and they are served by the webserver through
HTTP/1.1 as well, see the curl logs (on the lef
I'll need to look at this in more detail when I have time. However,
remember TCP level communication is at the OS level. LMS does not send
RST - just open and close. RST are as a result of timeouts at TCP level
and implemented at driver level. Since your test system is WIndows based
and mine is
I have multiple pi's running picoreplayer 3.2 and have had this problem
in the past. I'm currently trying to setup a new pi3 model B with a
Hifiberry DAC+ with a 5v 2.5A power adapter (canakit). LMS is running on
a dedicated windows 10 machine and player is connected via ethernet.
After I flash th
There is no configuration via ftp or ssh. There is a setup command
from ssh, but that is only for setting up the networking of the player.
If you can ssh in,
type
Code:
tc@piTouch:~$ cat /var/log/pcp_boot.log
and
tc@piTouch:~$ cat /usr/local/sbin/config.c
I've thought about where to post this and I think this is the correct
forum. I have two pCP's. One on a RPI3B and one on a RPI3B+. I don't
think this makes any difference, but what do I know. Ill answer that.
Nothing.
On the RPI3B, using the command "pcp rand" in the tweaks page of pCP,
the playe
Howard Passman wrote:
> I've thought about where to post this and I think this is the correct
> forum. I have two pCP's. One on a RPI3B and one on a RPI3B+. I don't
> think this makes any difference, but what do I know. Ill answer that.
> Nothing.
>
> On the RPI3B, using the command "pcp rand" i
I appreciate the wag at it. Both are set at "Pause at power off/Resume
at power on". I have tried it the other way though.
Thanks,
Howard
kidstypike wrote:
> Just a wag, it's nothing to do with the setting at LMS > Settings >
> Player tab > your player > Power on Resume?
>
>
> 24933
--
Alright, I realize I might be being a bit of a pest here, but I thought
I would give this one more try after narrowing this down to the AP
Mode.
I won't go over the entire thing I'm trying to do, but suffice it to say
that if you are using APMode, commands from "Auto start LMS" and/or
"User comma
jbraveman wrote:
> I have multiple pi's running picoreplayer 3.2 and have had this problem
> in the past. I'm currently trying to setup a new pi3 model B with a
> Hifiberry DAC+ with a 5v 2.5A power adapter (canakit). LMS is running on
> a dedicated windows 10 machine and player is connected via
Howard Passman wrote:
> I've thought about where to post this and I think this is the correct
> forum. I have two pCP's. One on a RPI3B and one on a RPI3B+. I don't
> think this makes any difference, but what do I know. Ill answer that.
> Nothing.
>
> On the RPI3B, using the command "pcp rand" i
Hi Greg,
What I've been trying to do is use a pCP in my car, so the APmode was a
god send. But, no matter if you use the LMS settings or the Tweaks, the
player will not reboot and start playing a playlist. It always looses
the previous playlist I'm assuming because it looses power from the
car.
Arh AP mode. That explains it. :cool:
I wasn't keeping track... :(
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=108852
_
Hi pCP Team,
This might be a question better asked in the Jivelite thread, but i
thought I'd start here first. Sorry if i'm in the wrong thread.
I have a playlist of internet radio stations set to auto start and all
is working well there, but I'd love it if the VU meter visualisations
page was the
SBFan wrote:
> Thanks for your help!, next time i go shopping for a DAC i will choose
> one that does native DSD.
I don't consider DOP vs. NATIVE the key issue. Not sure if anybody
requires more then DSD128.
The key question IMO is if the DAC is a true-DSD DAC!!
DACs like e.g. Topping D50 sup
14 matches
Mail list logo