=false id=25c5be9a-6d0c-3afe-b20d-0ddfce2f7ff7) - existing VMs can
still be started on pool1 - but no new VM's/volumes should be created on it.
Let me know if that works for you.
On Fri, 20 Sep 2019 at 09:57, Andrija Panic wrote:
> Hi Piotr,
>
> which release are you running?
> Until re
Hi Piotr,
which release are you running?
Until recently, even if tags did NOT match between 2 different pools (UI
will say "Not suitable") - migration was still possible - and will execute
properly - but later you would be unable to change the Offering of the disk
to match any offering that's
e talk's/interviews recording at CCC!
> >
> > Regards,
> > Anurag
> >
> > From: Andrija Panic
> > Sent: Friday, September 20, 2019 2:05 AM
> > To: dev
> > Cc: users
> > Subject: Re: [URGENT] - your presentation desc
> &
Was about to reply - that will work better - so YES (not enough beer
apparently...)
Disregard this thread...
Thx Sid
On Thu, 19 Sep 2019 at 22:25, Siddhartha Kattoju
wrote:
> Can you use the descriptions from the conference schedule ?
>
> On Thu., Sep. 19, 2019, 4:21 p.m. Andr
Hi guys, speakers at CCC19NA/Las Vegas,
As we speak - Rich Bowen is uploading 60GB of video material from CCC19NA /
Las Vega - all talks from the CCC (that I recorded).
@all speakers - I need an URGENT short description of your presentation -
this will be placed on the "Description" field on
ty: virsh secret-undefine UUID
>
>
>
> Regards,
>
> Piotr
>
>
>
>
>
> *From:* Andrija Panic
> *Sent:* Tuesday, September 10, 2019 8:13 PM
> *To:* users ; Piotr Pisz
> *Subject:* Re: replace existing rbd pool
>
>
>
> Piotr,
>
>
>
> user/sec
gt; We've set the overprovisioning to 2, and clearly doesn't work on
> SharedMountPoint :(
>
>
>
> “Unable to update storage pool with id 19. Overprovision not supported
> for SharedMountPoint”
>
>
>
> Piotr
>
>
>
>
>
> *From:* Andrija Panic
> *Sent:* Tuesday, Septem
and may be legally privileged. If you are not the intended recipient of
> this e-mail, any disclosure, copying, distribution or use of its contents
> is strictly prohibited, and you should please notify the sender immediately
> and then delete it (including any attachments) from your system. Tha
0 | Ready |
> | 50.00 | Ready |
> | 100.00 | Ready |
> | 50.00 | Ready |
> | 100.00 | Ready |
> | 500.00 | Ready |
> | 250.00 | Ready |
> | 250.00 | Ready |
> | 250.00 | Ready |
> | 250.00 | Ready |
> | 250.00 | Ready |
> | 40.00 | Ready |
> | 100.00 | Ready |
&
Wow.. . That's the community spirit - 3 replies in 8min from the original
email!
On Tue, Sep 17, 2019, 08:07 Andrija Panic wrote:
> Hi Piotr,
>
> Allocated should be the sum of all disks virtual size from the DB,
> "volumes" table.
>
> Can you do select sum "siz
Hi Piotr,
Allocated should be the sum of all disks virtual size from the DB,
"volumes" table.
Can you do select sum "size" from that table, where pool_id=xxx and removed
is NULL (on my mobile, can't remember the name of the column in the table,
probability just "size").
More importantly, I'm
e help needed.
Cheers
Andrija
On Fri, Sep 13, 2019, 08:38 Andrija Panic wrote:
> Cool - would be happy to learn that the issue is solved - want to make
> after that the proper documentation upstream.
>
> Thx Mike!
>
> On Fri, Sep 13, 2019, 07:19 Tutkowski, Mike
> wrote:
>
Hi Adam,
That insufficient capacity exception message has probably nothing to do
with the number of CPU cores (and most of the time with anything
capacity-related, it's just that we are lazy to pass the real error to as
the API reaponse...) but is a general message that can mean 100 different
set it up.
>
> I will get in contact with NetApp and hear what they say, I’m afraid
> it gonna take some time…
>
> Regards
> Christian
>
> > On 13. Sep 2019, at 00:00, Andrija Panic
> wrote:
> >
> > Right,
> >
> > so I
In other words, approach Netapp and they will have it fixed for you this
way or another (assuming it's a valid bug, which it seems to be).
Andrija
On Thu, Sep 12, 2019, 15:00 Andrija Panic wrote:
> Right,
>
> so I managed to reproduce your issues, 2 times, using ACS 4.13/master and
ire Shared, etc).
On Thu, 5 Sep 2019 at 11:33, Andrija Panic wrote:
> That sounds OK to me, the steps to add SF. That should create a datastore
> per each created volume you create (if not mistaken). The other way is to
> use SolidFireShared plugin, which should create a single datast
It should be fine with ACS 4.13 with a lot of missing mappings being
added. 4.13 is officially voted as a release but need some more days
(probably) to get it's release notes and stuff. It is recognised as
XenServer 7.6.0, and the OS mappings are set as such.
1. Assuming your backup is a 4.9 DB with dynamic roles (which at some point
in time (when upgrading ACS from 4.x to 4.9) you have created by converting
static roles to dynamic role via the script) - I guess it would be enough
to rename/delete the following file: "
Piotr,
user/secret is not encrypted or in any way related to the MON IPs/FQDN.
The problem you have (afaik) is that your ACS is trying/asking libvirt to
create a new secret for (what seems to it as a new storage pool, due to now
using FQDN - i.e.since you changed it's IP to FQDNS, it needs to
All,
I am here in Las Vegas and plan to video all of the CCC talks. I’ll then be
posting those on the ASF YouTube channel.
As I have the equipment here, I would also like to try and film some
footage and interviews that I can use to create some Cloudstack marketing
videos - that we could use on
"(Agent-Handler-1:null) (logid:) Connection with libvirtd is broken:
invalid"
Perhaps try to restart your libvird or check its logs - your setup might be
in smoke...
Sun, Sep 8, 2019, 09:24 Fariborz Navidan wrote:
> And these exceptions are logged in agent log:
>
> 2019-09-08 17:42:55,005
llback since 0.5.0; rados-java 0.5.0 is the version used by CloudStack
> 4.13.0.0
>
> I will be updating here soon.
>
> Em dom, 8 de set de 2019 às 12:28, Wido den Hollander
> escreveu:
>
>>
>>
>> On 9/8/19 5:26 AM, Andrija Panic wrote:
>> > Maaany
this is of course assuming you have this (Load balancer)
> > enabled for the network offering.
> >
> >
> >
> > --
> >
> > Nii
> >
> >
> >
> > *From:* Fariborz Navidan
> > *Sent:* Sunday, September 8, 2019 5:55 AM
> > *To:* us
No way. For Shared networks in Advanced Zone, VR is used only for
dhcp/dns/user-data/meta-data amd nothing else at all.
To use VR as the loadbalancer, you need to deploy a VPC, and use the
correct network offering (offerring...vpc...netwotks...withExternalLB or
similar name...). This means you
t;1567869534480"},
> cmdVersion: 0, status: IN_PROGRESS, processStatus: 0, resultCode: 0,
> result: null, initMsid: 2200502468634, completeMsid: null, lastUpdated:
> null, lastPolled: null, created: null, removed: null}
>
> 2019-09-07 23:27:00,221 DEBUG [c.c.a.ApiServlet]
> (qtp5
$Worker.run(ThreadPoolExecutor.java:624)
at java.lang.Thread.run(Thread.java:748)
On Fri, 6 Sep 2019 at 19:07, Andrija Panic wrote:
> storage.cleanup.delay
> storage.cleanup.interval
>
> put both to 60 (seconds) and wait for up to 2min - should be deleted just
> fin
storage.cleanup.delay
storage.cleanup.interval
put both to 60 (seconds) and wait for up to 2min - should be deleted just
fine...
cheers
On Fri, 6 Sep 2019 at 18:52, li jerry wrote:
> Hello All
>
> When I tested ACS 4.13 KVM + CEPH snapshot, I found that snapshots could
> be created and rolled
lker
>
> Fraunhofer-Gesellschaft e.V.
> Schloss Birlinghoven
> 53754 Sankt Augustin
> Telefon: +49 2241 14-2311
> E-mail: simon.voel...@zv.fraunhofer.de simon.voel...@zv.fraunhofer.de>
>
>
>
> Am 06.09.2019 um 11:23 schrieb Andrija Panic <mailto:andrija.pa...@gmai
Hi Simon,
I assume that the cloudbased-init runs BEFORE the user has to set pass via
Windows, thus overwriting the pass that ACS has previously set?
Does rebooting the VM actually sets the new pass (from ACS), that was
generated previously? You can actually check inside the VR
answer my question from previous email, and also you can
chech for datastore statuses in vCenter for any error, something is not
right...
Andrija
On Thu, Sep 5, 2019, 16:15 wrote:
> Hi Andrija,
>
> > On 5. Sep 2019, at 15:07, Andrija Panic wrote:
>
> > the message is that
Actually, what I wanted to check also - in this error message is mentioned
"root-29" which is the root volume of the VM with ID 29 - can you confirm
that is YOUR VM which failed to start, or is this perhaps some leftover
volume/datastore
On Thu, 5 Sep 2019 at 15:07, Andrija Pa
29, wrote:
> Thanks for taking time to look into it.
>
> https://pastebin.com/utPhEVkW
>
> Regards
> Christian
> > On 5. Sep 2019, at 13:16, Andrija Panic wrote:
> >
> > Can you share the mgmt logs when the problem happens? Please upload to
> > pastebin or
Can you share the mgmt logs when the problem happens? Please upload to
pastebin or similar.
Andrija
On Thu, 5 Sep 2019 at 11:45, wrote:
> Hi,
>
> I have managed to overcome the problem by forcing Cloudstack to reconnect
> the host after I configured the iSCSI HBA.
> It seems that Cloudstack
grep controller
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Mon, Sep 2, 2019 at 10:12 AM Andrija Panic
> wrote:
>
> > Kindly double check if both OS type and the controller defined are
> > identical - it makes no sense to me to use same
7" gives virtio access to CentOS 7.6 on old
> ACS.
> ----
>
> On Mon, Sep 2, 2019 at 1:18 AM Andrija Panic
> wrote:
>
> > That's a nice email subject indeed :)
> >
> > For template, make sure that you are using identical OS type for that
> > t
Thanks for the new release Paul!
On Sun, Sep 1, 2019, 14:45 Paul Angus wrote:
> Hi all,
>
> After 3 business days, the vote for CloudStack 4.13.0.0 *passes* with 3 PMC
> + 1 non-PMC votes.
>
> +1 (PMC / binding)
> * Gabriel Beims Bräscher
> * Boris Stoyanov
> * Rohit Yadav
>
> +1 (nonbinding)
>
That's a nice email subject indeed :)
For template, make sure that you are using identical OS type for that
template, on the new ACS as on the old one. Are these ACS installations of
the same version?
Keep in mind that "CentOS 7" is not the same as "CentOS 7.2" from ACS
perspective and the last
in is in KVM.
> >
> > [root@fr-kvm1 ~]# virsh list --all
> > IdName State
> >
> >
> > [root@fr-kvm1 ~]#
> >
> > On Wed, Aug 28, 2019 at 10:46 PM Andrija Panic
&g
> -h 192.168.0.2
> > 2019-08-28 19:00:04,735 DEBUG [kvm.resource.KVMHAMonitor] (Thread-8:null)
> > (logid:) Executing while with timeout : 6
> > 2019-08-28 19:00:04,741 DEBUG [kvm.resource.KVMHAMonitor] (Thread-8:null)
> > (logid:) Execution is succes
I Don't see anything attached from agent.log? Make sure to put agent in
debug mode before posting logs (google for "cloudstack agent debug mode",
there is a simple sed command, restart agent afterwards).
Andrija
On Wed, Aug 28, 2019, 17:44 Fariborz Navidan wrote:
> Hi,
>
> Also this is agent
Yes.
On Wed, Aug 28, 2019, 05:12 Cloud Cache wrote:
> Hello,
>
> Is this project still in active development for cloud integration?
>
> thanks.
>
Is this perhaps a reused KVM host? In that case it's known to fail, you
just need to start the agent servise manually on KVM host, before adding it
again.
Check the /var/log/cloudstack/agent/setup.log for the error messages while
adding/setting up KVM host.
Andrija
On Tue, Aug 27, 2019, 19:43
All global configuration settings are stored in the "cloud.configuration"
table. If those 2 different ACS installations are of SAME version, then
simply exporting that table from first to second ACS installation/DB will
be enough (restart db server on the second ACS installation).
If you are
nger sein, ist Ihnen jegliche Offenlegung,
> > Vervielfältigung, Weitergabe oder Nutzung des Inhalts untersagt. Bitte
> > informieren Sie in diesem Fall unverzüglich den Absender und löschen
> > Sie die E-Mail (einschließlich etwaiger beigefügter Dateien) von Ihrem
> System.
>
> Adam
>
> -Original Message-
> From: Andrija Panic
> Sent: 21 August 2019 16:07
> To: users
> Subject: Re: Changing cpu.overprovisioning
>
> ** This mail originated from OUTSIDE the Oakford corporate network. Treat
> hyperlinks and attachments i
On order to change calculations (bring down those 85% to say 42% with
doubled the over provisioning factor), you do need to stop and start VMs.
Currently it is this way...
After changing the cpu (and God forbid RAM) overprovisioning factros AT THE
CLUSTER LEVEL), no need to restrart mgmt server.
Hi Francisco,
As long as your OpenStack offers nested virtualization, it should be fine.
I expect you would be only able to run KMV with ACS, as nested on top of
OpenStack. Anyway, make sure to confirm that nested hypervisor has all the
needed CPU flags and can do its virtualization job properly.
supported only by OpenVSwitch)
Cheers
On Thu, 15 Aug 2019 at 13:27, Melanie Desaive
wrote:
> Hi Andrija,
>
> Am Donnerstag, den 15.08.2019, 12:54 +0200 schrieb Andrija Panic:
>
>
> One question though, why are you aiming to use OVS for KVM? i.e. why not
> regular/default Linux br
Navigate to the OVS provider and press the “Enable Provider” button
>
> On Thu, 15 Aug 2019 at 12:23, li jerry wrote:
>
> > OVS on centos7, I've already configured.
> >
> > The document mentions that ACS disables OVS by default. How should I
> > enable it in ACS? I
nable it in ACS? I can't find this OVS on the interface.
> 发件人: Andrija Panic<mailto:andrija.pa...@gmail.com>
> 发送时间: 2019年8月15日 18:18
> 收件人: users<mailto:users@cloudstack.apache.org>
> 主题: Re: How to configure OVS correctly
>
> Hi Li,
>
> check this one:
>
>
your traffic. Later add you
cluster etc...
One question though, why are you aiming to use OVS for KVM? i.e. why not
regular/default Linux bridge?
Cheers
On Thu, 15 Aug 2019 at 10:00, Melanie Desaive
wrote:
> Hi Andrija,
>
> Am Mittwoch, den 14.08.2019, 17:57 +0200 schrieb Andrija
Hi Melanie,
a) I assume you are planning on staying on single "Physical network" in ACS?
b) are you planning on reconfiguring your XenServer hosts at all (in sense
of networking) or just thinking adding KVM hosts and defining proper KMV
Traffic Label for each traffic type you have?
Makes sense
Considering that manual VM LIVE migrations via CloudStack from
non-dedicated to dedicated SHOULD/DOES work - then I would say this is an
"unhandled" case, which indeed should be handled and live migration should
happen instead of stopping the VMs.
I assume someone else might jump in - but if not,
Nope, that is the reason security groups should be used in multi-tenant
shared network... At least I'm not aware that is possible.
Not sure if hacking the DB is possible though...
On Thu, 8 Aug 2019, 20:58 Fariborz Navidan, wrote:
> Hello,
> I have found a user VM who is running a sort of DHCP
Rakesh,
I'm not quite sure if this is a bug/misbehaviour, but it is indeed a
confusing one.
When you ask a host to go to maintenance mode, , you are using
prepareHostForMaintenance as you said, and this will trigger the host to go
into the "PrepareForMaintenance" state... so the job does indeed
An aggressive way is to restart all mgmt servers - all async jobs will be
cleared our / fail - but there is also a way to wipe from async_job table
or similar, but I can't remember that from top of my head now...
On Tue, 6 Aug 2019 at 12:03, li jerry wrote:
> Hello all
>
> Is there an
They behave similar to master/slave setup - but there is NO such
terminology used here.
One Usage server will do all the work (run usage jobs per the schedule)
until you stop/restart it - then the second one will be the owner of all
usage jobs (this is from testing/experience, not from official
check if that MAC address exists in the "nics" table in DB - if not - then
it's not an ACS VM.
Are you running a Shared network or Isolated/VPC - I don't understand how
can custom-built DHCP that exists on a user VM reach out to
Andrija
On Wed, 31 Jul 2019 at 09:42, Fariborz Navidan
wrote:
>
Wot he said ^^^
There as a Swiss based provider named CloudSigma (where I was one of their
customers loong time ago) - they were using Gluster (loong time
ago) and they had tremendous issues, reverting whole storage snapshots like
a week in the past - all of the sudden you/me see crazy
ing with vGPU (on Centos7 and
> kvm).
>
> Extraconfig is a super option, everything works as planned, CloudStack is
> great :-)
>
> Best regards,
> Piotr
>
>
>
> -Original Message-
> From: Andrija Panic
> Sent: Friday, May 24, 2019 7:02 PM
> To:
Check your SSVM - google for "troubleshooting SSVM" and you'll see a script
which can be executed from inside SSVM, to check for any problems.
On Sun, 28 Jul 2019, 20:47 Fariborz Navidan, wrote:
> Hello,
>
> I have tried to add new ISO but it is not ready after download
> in ACS 4.12
> Please
That error or "error" is present when starting mgmt server - but it does
start correctly. Not sure if this is by design or a valid "error" - but
doesn't affect anything (right ?)
Perhaps someone else can advise.
On Fri, 26 Jul 2019 at 19:43, Richard Persaud
wrote:
> Hello,
>
>
>
> 4.11.3 on
Wido, Gabriel,
kindly kick the build jobs for Ubuntu when possible.
Thanks
Andrija
On Wed, 3 Jul 2019 at 13:07, Rohit Yadav wrote:
> Wido, Gabriel - I've built and sync-ed 4.11.30 CentOS 6, 7 packages on
> http://download.cloudstack.org however I'm not sure how to work the
> ubuntu
/cloudstack/issues/3526.
>
> пт, 26 июл. 2019 г. в 00:09, Andrija Panic :
>
> > Based on this (I'm no developer...)
> >
> >
> https://github.com/apache/cloudstack/blob/4.11/plugins/hypervisors/kvm/src/com/cloud/hypervisor/kvm/resource/wrapper/LibvirtStartCommandWrapper.ja
0c4abda) Unable to start VM on Host[-1-Routing] due to failed
> to
> >> > get free memory
> >> > ...
> >> > 2019-07-25 15:58:14,421 ERROR [c.c.v.VmWorkJobHandlerProxy]
> >> > (Work-Job-Executor-27:ctx-bce5a678 job-6654658/job-6654659
> ctx-f
nsufficientServerCapacityException: Unable to create a
> deployment for VM[User|i-2-977270-VM]Scope=interface
> com.cloud.dc.DataCenter; id=3
>
> management-server.log https://yadi.sk/d/wzyZVeTKS2kkDQ
>
> чт, 25 июл. 2019 г. в 16:51, Andrija Panic :
>
> > Can you
Can you share the whole log file (pastebin.org please, or similar) ?
On Wed, 24 Jul 2019 at 17:34, Dmitry Berezhnoy
wrote:
> Hello,
>
> Asynchronous creating VM bring to "Unable to start VM on Host[-1-Routing]
> due to failed to get free memory". After that I see ERROR:
>
any network stuck in whatever state - should not impact starting your CPVM
or SSVM.
Share more logs if you still have issues with CPVM/SSVM (and also share
details of your setup, zone, networking etc)
Andrija
On Thu, 25 Jul 2019 at 14:09, Pierre-Luc Dion wrote:
> Hi,
>
> If you have issue
Hi Richard,
- from which ACS versions did you upgrade?
- this is DNS resolution being problematic, so please verify it works (from
your laptop) (could also confirm it's there in dnsmasq, but actually
testing the resolution is better)
-- please note that you should have ALL of your public IPs
https://github.com/shapeblue/trillian
On Wed, 24 Jul 2019 at 21:05, Darren Cole wrote:
> In the past I've installed CloudStack on two nodes with ansible, then
> manually created the zones, pods, and cluster.
>
> I have some newer ansible based on that, but it is still a work in
> progress.
>
check your bridges once more - also at some point, systemvm.iso will be
mounted to SSVM/CPVM to provision vanilla systemvm template to become SSVM
or CPVM - simply check the logs - can't proceed without logs obviously...
On Fri, 19 Jul 2019 at 16:34, Fariborz Navidan
wrote:
> However, I
Cheers Nathan!
On Fri, 19 Jul 2019 at 16:59, Paul Angus wrote:
> Fellow CloudStackers,
>
>
>
> It gives me great pleasure to say that Nathan has been invited to join the
> PMC and has gracefully accepted.
>
>
> Please join me in congratulating Nathan!
>
>
>
>
> Kind regards,
>
>
>
> Paul Angus
The difference is:
VMware - no difference, unless you set "CPU cap" on the Compute Offering -
than the limit will be set to the number of MHz per the offering
XenServer - no difference, unless you set "CPU cap" on the Compute Offering
- similar to VMware
KVM - no difference no matter if "CPU cap"
Have you added os/hypervisor mappings inside the DB? I vaguely remember 7.5
not having needed mapping and was considered to be 6.5, thus a manual fix
was needed.
Perhaps Rohit can sched some light?
Anyways, a full log would be great (pastebin or other online service
please).
Regards
On Tue, 16
Don't run mgmt on same KVM hosts that are used by Cloud Stack, just don't
please.
Migration of VMs into ACS boils down to creating root volume snapshot,
converting to template and downloading that template into other ACS env.
For data disks, you can also create snap, convert to volume and
Congrats Bobby !
On Tue, 16 Jul 2019 at 13:40, Riepl, Gregor (SWISS TXT) <
gregor.ri...@swisstxt.ch> wrote:
> Congratulations, Boris!
>
--
Andrija Panić
XFS ("puke" smiley from skype goes here..), some funny issues historically,
but should be "better" than ext4 (I still prefer ext4 if possible).
CEPH - awful a lot knowledge and expertise is required, especially to tune
it for NVME - but do you want LOCAL or DISTRIBUTED storage (since Ceph is
That would still be Gabriel :)
Congrats Gabriel!
On Sat, Jul 13, 2019, 18:01 Paul Angus wrote:
> Fellow CloudStackers,
>
>
> Its non-stop today!
>
>
>
> It gives me great pleasure to say that Gabriel has been invited to join the
> PMC and has gracefully accepted.
>
>
> Please joining me in
Congrats Sven!
On Sat, Jul 13, 2019, 17:58 Rohit Yadav wrote:
> Congrats Sven!
>
> Regards.
>
> Regards,
> Rohit Yadav
>
>
> From: Paul Angus
> Sent: Saturday, July 13, 2019 9:14:47 PM
> To: priv...@cloudstack.apache.org ;
> d...@cloudstack.apache.org ;
>
Afaik, those resource limits are not released (i.e. number of CPUs ) when
you stop a VM - it is permanent accounted against an account until VM is
removed. Buy I might be wrong - on the specific Account page/tab in UI,
there is something like " update resource count" button, which should give
you
d its dhcp
offer, will "win" and VM will get its IP... you have "race condition" in
any network with more than 1 DHCP server... It's a "wrong" setup
effectively.
Cheers
On Tue, Jul 9, 2019, 22:47 Andrija Panic wrote:
> Jesse,
>
> You can experiment
vnet0
> --physdev-is-bridged
>
>
>
> Thanks for quick response Andrija!
>
> - Jesse
>
>
>
>
> On Tue, Jul 9, 2019 at 10:39 AM Andrija Panic
> wrote:
>
> > ACS will only offer DHCP leases to its VMs, via DHCP reservation.. If you
> > have another D
ACS will only offer DHCP leases to its VMs, via DHCP reservation.. If you
have another DHCP server in your area, than it might be quicker to offer a
lease to a VM. You have to either remove your non-ACS DHCP server
completely, OR make sure it uses reservation for non-ACS servers/hosts i.e.
NOT let
gt;
> Thanks
>
> On Tue, Jul 9, 2019 at 4:56 PM Andrija Panic
> wrote:
>
> > If I recall correctly, you are on KVM, and afaik scaling a VM while
> running
> > is not supported for KVM (besides, template/VM needs to be marked as
> > Dynamically scalable).
> >
> jobstatus = 2
> userid = 27cd05dd-3907-11e9-87ab-a4bf012ed1a6
> (local) >
>
> On Tue, Jul 9, 2019 at 2:09 PM Andrija Panic
> wrote:
>
> > Please share more details, cmk command used etc.
> >
> > On Tue, Jul 9, 2019, 14:54 Fariborz Navidan
> wrote:
> >
&
Please share more details, cmk command used etc.
On Tue, Jul 9, 2019, 14:54 Fariborz Navidan wrote:
> Hello,
>
> I get following error when I want to scale a VM via cloudmonkey: errortext
> = Storage pool Primary1 does not have enough space to resize volume ROOT-37
>
> I didn't request any
Assuming you are on KVM...total number of Shares = total number of Mhz
(cores * Mhz) / cpuOverprovisioningFactor - cpu shares get changed (after
changing cpu overprovisioning) only when you stop and start an existing VM.
So i.e. 2 vCPU of 2000 MHz VM, with CPU overprovisioning of 2 will get
Worth trying to clear browser cache - I had (a possibly) similar issue -
login data saved in Chrome (for some demo env) and when Chrome
auto-populate username/password fileds, then when I click on login button -
nothing happens at all.
1) clear browser cache
2) restart mgmt server
On Fri, 5 Jul
That is an "old" bug with original RC1 4.11.3 release, please check the
newest packaging, there might be already built - check the "[VOTE][RESULT]
Apache CloudStack 4.11.3.0" thread and latest reply from Rohit on packages
built.
On Thu, 4 Jul 2019 at 12:27, Boris Stoyanov
wrote:
> If you have a
t;
> - Original Message -
> > From: "Andrija Panic"
> > To: "users"
> > Sent: Monday, 1 July, 2019 14:10:20
> > Subject: Re: Network Bandwidth Stats
>
> > Can't vouch for that Lucian, since the "min" setting IS active (300), but
t some stats/graphs out of Cloudstack/KVM is to use the
> Prometheus libvirt exporter.
>
> --
> Sent from the Delta quadrant using Borg technology!
>
> Nux!
> www.nux.ro
>
> - Original Message -
> > From: "Andrija Panic"
> > To: "users&quo
With KVM, configure vm.disk.stats.interval and vm.network.stats.interval to
non-zero value, and it will exports some disk and net tx/rx metrics in
Instances --> Metrics.
For VMware its coming in 4.13 afaik.
Check different other *stats.intetval global settings as well.
On Thu, Jun 27, 2019,
Try "virt-top" utility as an example.
On Fri, Jun 28, 2019, 18:08 Rakesh v wrote:
> Yes. Virtio exposes cpu/ram stats of a VM and cloudatack can get this data
> without logging into the VM
>
> Sent from my iPhone
>
> > On 28-Jun-2019, at 4:54 PM, Fariborz Navidan
> wrote:
> >
> > Hi,
> >
> >
Not for now Li.
On Fri, Jun 28, 2019, 09:13 li jerry wrote:
> Hi Andrija
> Yes, I am referring to this kvmheqrtbeat.sh.Is there a time plan now?
>
> 发件人: Andrija Panic<mailto:andrija.pa...@gmail.com>
> 发送时间: 2019年6月28日 14:35
> 收件人: users<mailto:users@cloud
I assume you are referring to the heartbeat scripts (i.e.kvmheqrtbeat.sh)
that check/write to storage every now and then and if storage is
unavailable, will restart KVM host ?
If so, then yes, there is some effort already about same kind of thing on
Ceph, without clear ETA.
On Fri, Jun 28, 2019,
Good that you got it solved.
On Thu, 27 Jun 2019 at 20:42, Fariborz Navidan
wrote:
> Thanks. The issue was firewall rules After rebot I needed to restore rules
>
> Thanks
>
> On Thu, Jun 27, 2019 at 10:49 PM Andrija Panic
> wrote:
>
> > Well...
> >
> >
is in place
Let us know how it goes.
Andrija
On Thu, 27 Jun 2019 at 19:55, Fariborz Navidan
wrote:
> Hello,
>
> I did but issue exists.
>
> Please advise.
>
> Thanks
>
> On Thu, Jun 27, 2019 at 9:47 PM Andrija Panic
> wrote:
>
> > destroy CPVM, it will
destroy CPVM, it will be recreated
On Thu, 27 Jun 2019 at 18:46, Fariborz Navidan
wrote:
> Hello,
>
> After recent reboot, console proxy refuses access to all VMs with error
> Unable
> to start console session as connection is refused by the machine you are
> accessing
>
> Please advise.
>
>
the management server log and found that it complaints
> about maximum number of running vms is reached on the host. How can I
> modify this setting?
>
> Thanks
>
> On Thu, Jun 27, 2019 at 2:58 PM Andrija Panic
> wrote:
>
> > It's enough to raised CPU overprovisioning f
It's enough to raised CPU overprovisioning factor only on the cluster level
(assuming 4.11).
NO need to restart mgmt at all (though it says it's needed...)
NO need to restart any hypervisors hosts
In order for correct changes to happen, you need to stop and start all the
running VMs (in KVM they
501 - 600 of 1420 matches
Mail list logo
