On Thu, Jul 30, 2020 at 12:07 AM wrote:
>
> I honestly don't know, because I have not tried myself, so you might just
> want to stop reading right here.
Same here :-)
>
> But from what I understand about the design philosophy of oVirt, it should be
> ok to change it, while nobody probably
On Tue, Jul 28, 2020 at 9:06 AM wrote:
> Hi community,
> I would like to use 3 nodes for hypervisor (hosted engine or install a
> separate VM with engine for its subsequent management) to use them as
> storage nodes - drbd 9 dual primary + quorum node (aka backup), ocfs 2 - so
> that the VMs
On Thu, Jul 30, 2020 at 10:57 AM Yedidyah Bar David wrote:
> On Thu, Jul 30, 2020 at 10:47 AM Alex K wrote:
> >
> >
> >
> > On Thu, Jul 30, 2020 at 10:25 AM Alex K wrote:
> >>
> >> Hi all!
> >>
> >> I am going though an upgrade from ovirt 4.2 (4.2.8.2-1.el7) to 4.3 for
> a two node cluster
On Thu, Jul 30, 2020 at 10:25 AM Alex K wrote:
> Hi all!
>
> I am going though an upgrade from ovirt 4.2 (4.2.8.2-1.el7) to 4.3 for a
> two node cluster with self hosted engine. I have done previously upgrades
> from 4.1 to 4.2 successfully with minor issues which where fixed.
>
> I wanted to
On Tue, Jul 28, 2020 at 11:51 AM Anton Louw via Users
wrote:
>
>
> Hi All,
>
>
>
> Does somebody perhaps know the process of changing the Hosted Engine IP
> address? I see that it is possible, I am just not sure if it is a straight
> forward process using ‘nmtui’ or editing the network config
On Thu, Jul 30, 2020 at 11:08 AM Alex K wrote:
>
>
> On Thu, Jul 30, 2020 at 10:57 AM Yedidyah Bar David
> wrote:
>
>> On Thu, Jul 30, 2020 at 10:47 AM Alex K wrote:
>> >
>> >
>> >
>> > On Thu, Jul 30, 2020 at 10:25 AM Alex K
>> wrote:
>> >>
>> >> Hi all!
>> >>
>> >> I am going though an
On Sun, Jul 19, 2020, 17:22 wrote:
> Hi
>
> I did a fresh installation of version 4.4.0.3. After the engine setup I
> replaced the apache certificate with a custom certificate. I used this
> article to do it:
> https://myhomelab.gr/linux/2020/01/20/replacing_ovirt_ssl.html
>
> To summarize, I
Good that is ok for you now.
As Gianluca told you the command to see all the gluster volume settings is :
gluster volume get vol_name all
The previous command you used : gluster volume info vol_name will
list only modified settings from default and not all the settings. The
output shows
On Thu, Jul 30, 2020, 09:31 Ramon Clematide wrote:
> Hi Nir
>
> I did not modify /etc/ovirt-imageio/conf.d/50-engine.conf
>
> I only replaced those files:
>
> /etc/pki/ovirt-engine/keys/apache.key.nopass
> /etc/pki/ovirt-engine/certs/apache.cer
> /etc/pki/ovirt-engine/apache-ca.pem
>
>
On Thu, Jul 30, 2020 at 2:45 PM Yedidyah Bar David wrote:
> On Thu, Jul 30, 2020 at 1:47 PM Alex K wrote:
>
>>
>>
>> On Thu, Jul 30, 2020 at 1:30 PM Yedidyah Bar David
>> wrote:
>>
>>> On Thu, Jul 30, 2020 at 1:20 PM Alex K wrote:
>>> >
>>> >
>>> >
>>> > On Thu, Jul 30, 2020 at 12:56 PM
On Thu, Jul 30, 2020 at 11:30 AM Alex K wrote:
>
>
> On Tue, Jul 28, 2020 at 11:51 AM Anton Louw via Users
> wrote:
>
>>
>>
>> Hi All,
>>
>>
>>
>> Does somebody perhaps know the process of changing the Hosted Engine IP
>> address? I see that it is possible, I am just not sure if it is a
On Thu, Jul 30, 2020 at 12:01 PM Yedidyah Bar David wrote:
> On Thu, Jul 30, 2020 at 11:30 AM Alex K wrote:
>
>>
>>
>> On Tue, Jul 28, 2020 at 11:51 AM Anton Louw via Users
>> wrote:
>>
>>>
>>>
>>> Hi All,
>>>
>>>
>>>
>>> Does somebody perhaps know the process of changing the Hosted Engine IP
On Thu, Jul 30, 2020 at 12:56 PM Yedidyah Bar David wrote:
> On Thu, Jul 30, 2020 at 12:42 PM Alex K wrote:
> >
> >
> >
> > On Thu, Jul 30, 2020 at 12:01 PM Yedidyah Bar David
> wrote:
> >>
> >> On Thu, Jul 30, 2020 at 11:30 AM Alex K
> wrote:
> >>>
> >>>
> >>>
> >>> On Tue, Jul 28, 2020 at
On Thu, Jul 30, 2020 at 11:15 AM Alex K wrote:
>
>
> On Tue, Jul 28, 2020 at 11:51 AM Anton Louw via Users
> wrote:
>
>>
>>
>> Hi All,
>>
>>
>>
>> Does somebody perhaps know the process of changing the Hosted Engine IP
>> address? I see that it is possible, I am just not sure if it is a
On Thu, 2020-07-23 at 15:17 +0300, Benny Zlotnik wrote:
I think you can remove 6197b30d-0732-4cc7-aef0-12f9f6e9565b from images and the
corresponding snapshot, and set the parent,
8e412b5a-85ec-4c53-a5b8-dfb4d6d987b8 as active (active = 't' field), and change
its snapshot to be active snapshot.
Good that is ok for you now.
As Gianluca told you the command to see all the gluster volume settings is :
gluster volume get vol_name all
The previous command you used : gluster volume info vol_name will list only
modified settings from default and not all the settings. The output shows only
On Thu, Jul 30, 2020 at 12:42 PM Alex K wrote:
>
>
>
> On Thu, Jul 30, 2020 at 12:01 PM Yedidyah Bar David wrote:
>>
>> On Thu, Jul 30, 2020 at 11:30 AM Alex K wrote:
>>>
>>>
>>>
>>> On Tue, Jul 28, 2020 at 11:51 AM Anton Louw via Users
>>> wrote:
Hi All,
On Thu, Jul 30, 2020 at 1:20 PM Alex K wrote:
>
>
>
> On Thu, Jul 30, 2020 at 12:56 PM Yedidyah Bar David wrote:
>>
>> On Thu, Jul 30, 2020 at 12:42 PM Alex K wrote:
>> >
>> >
>> >
>> > On Thu, Jul 30, 2020 at 12:01 PM Yedidyah Bar David
>> > wrote:
>> >>
>> >> On Thu, Jul 30, 2020 at 11:30
Il giorno dom 26 lug 2020 alle ore 16:15 Arik Hadas ha
scritto:
>
>
> On Sun, Jul 26, 2020 at 4:39 PM Liran Rotenberg
> wrote:
>
>>
>>
>> On Sun, Jul 26, 2020 at 11:52 AM Erez Zarum wrote:
>>
>>> Hey Liran,
>>> I still don't understand from those resources how can i add an "extra"
>>> timezone
Il giorno gio 23 lug 2020 alle ore 20:46 Morris, Roy
ha scritto:
> Hello,
>
>
>
> Does anyone have a guide or how to on setting up oVirt with passwordless
> ssh setup? I want to do this with a production environment to improve
> security but I have never done this before and want to build a test
Il giorno lun 27 lug 2020 alle ore 21:00 ha
scritto:
> Hi There!
>
> I'm trying to install oVirt self-hosted on Fedora 32 with kvm and the
> install failed.
Hi, despite we would love to be able to support Fedora we had to give up
trying to support it.
You can read more at
oVirt 4.4.2 First Release Candidate is now available for testing
The oVirt Project is pleased to announce the availability of oVirt 4.4.2
First Release Candidate for testing, as of July 30h, 2020.
This update is the second in a series of stabilization updates to the 4.4
series.
Important notes
+Arik Hadas can you please have a look here?
Il giorno lun 27 lug 2020 alle ore 09:09 Dmitry Sekretev <
dmitry.sekre...@profitclicks.ru> ha scritto:
> Hi!
> We have a problem with paused VMs in ovirt cluster. Please, help to solve
> this.
> In ovirt manager massege "VM rtb-stagedsw02-ovh has
On Thu, Jul 30, 2020 at 2:37 PM wrote:
> I've tested this now in three distinct farms with CentOS7.8 and the latest
> oVirt 4.3 release: OVA export files only contain an XML header and then
> lots of zeros where the disk images should be.
>
> Where an 'ls -l .ova' shows a file about the size of
On Thu, Jul 30, 2020 at 12:53 PM Nir Soffer wrote:
>
>
>
> On Sun, Jul 19, 2020, 17:22 wrote:
>>
>> Hi
>>
>> I did a fresh installation of version 4.4.0.3. After the engine setup I
>> replaced the apache certificate with a custom certificate. I used this
>> article to do it:
>>
Here is the ticket: https://bugzilla.redhat.com/show_bug.cgi?id=1862115
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
Export/Import/Transfer via export domain worked just fine. Just moved my last
surviving Univention domain controller from the single node HCI
disaster-recovery farm to the three node HCI primary, where I can now try to
make it primary and start building new backups...
Backups that do not work
I've tested this now in three distinct farms with CentOS7.8 and the latest
oVirt 4.3 release: OVA export files only contain an XML header and then lots of
zeros where the disk images should be.
Where an 'ls -l .ova' shows a file about the size of the disk, 'du -h
.ova' shows mere kilobytes,
I've run KVM VMs ontop oVirt Guest. Are you sure that the Nested
Virtualization is your problem ?
Best Regards,
Strahil Nikolov
На 29 юли 2020 г. 23:33:48 GMT+03:00, tho...@hoberg.net написа:
>I tried using nested virtualization, too, a couple of weeks ago.
>
>I was using a 3 node HCI
Hello,
I ve the same problem, I ve already set up glusterfs and like to deplay a self
hosted engine. I ve allready ovirt self hosted engine deployed, with no
problems. But here I get the same error with hosted-engine --deploy and in the
web frontend.
[ INFO ] TASK [ovirt.hosted_engine_setup
Hi all,
I see this has been asked in the past though I was not able to find a
specific answer.
I want to change the management network at a new subnet. In this case I am
using /etc/hosts and not DNS, though the steps can be performed with DNS
also.
What i do is:
1. Enable global maintenance
2.
Thanks to your log post, I was able to identify the proper place to find
information about the export process.
OVA exports don't fail for me, but result in empty disks, which is perhaps even
worse.
Two things I can suggest: Try with a new and smaller VM to see if it's actually
a size related
Hi,
This is not my first time, I have installed ovirt, ovirt-hci, rhv and
rhv-hci on top of a kvm host many times to test some functionality or to
test a new version til this latest version of ovirt 4.4.1
On my first test there was a problem with HCI deployment the gluster part.
Now that part
Hi all,
I have a dual node self hosted cluster v4.3 using gluster as storage so as
to test an actual scenario which will need to be followed at production.
The purpose is to rename the cluster FQDN to a new one, wiping out any
reference to the old previous FQDN. I was not successful in using the
Bongiorno Gianluca,
I am entering the data in bugzilla right now...
Logs: There is a problem, I have not found any log evidence of this export and
import, I don't even know which component is actually doing this.
For 'foreign' imports like VMware and other *.vmdk producing hypervisors, VDSM
On Thu, Jul 30, 2020 at 4:04 PM wrote:
> Here is the ticket: https://bugzilla.redhat.com/show_bug.cgi?id=1862115
>
>
could it be this bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1813028
?
It seems only verified as a status.
Can you check /var/log/ovirt-engine/ova/ (on engine I presume) if
Hi Nir
I did not modify /etc/ovirt-imageio/conf.d/50-engine.conf
I only replaced those files:
/etc/pki/ovirt-engine/keys/apache.key.nopass
/etc/pki/ovirt-engine/certs/apache.cer
/etc/pki/ovirt-engine/apache-ca.pem
ovirt-imageio has the apache certificates configured by default.
I found
Hi all!
I am going though an upgrade from ovirt 4.2 (4.2.8.2-1.el7) to 4.3 for a
two node cluster with self hosted engine. I have done previously upgrades
from 4.1 to 4.2 successfully with minor issues which where fixed.
I wanted to confirm with you, in case I am missing anything that may have
On Thu, Jul 30, 2020 at 10:47 AM Alex K wrote:
>
>
>
> On Thu, Jul 30, 2020 at 10:25 AM Alex K wrote:
>>
>> Hi all!
>>
>> I am going though an upgrade from ovirt 4.2 (4.2.8.2-1.el7) to 4.3 for a two
>> node cluster with self hosted engine. I have done previously upgrades from
>> 4.1 to 4.2
I'm trying to allow a particular iSCSI VLAN to be available to all hosts.. but
also to a few select VMs.
Im finding this challenging, since prior to now, I did host iSCSI config on the
host-local level.
i used the cockpit GUI to create a "VLAN" entity, assigned it to an interface,
and then
On Thu, Jul 30, 2020, 23:03 Philip Brown wrote:
> I'm trying to allow a particular iSCSI VLAN to be available to all hosts..
> but also to a few select VMs.
>
> Im finding this challenging, since prior to now, I did host iSCSI config
> on the host-local level.
> i used the cockpit GUI to create
HI Nir
Thank you. Yes exactly, another parameter different to config.tls.ca_file would
be nice.
Regards
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
On Thu, Jul 30, 2020, 23:20 Philip Brown wrote:
> Not quite done.
>
> How do I then assign a host-level IP address in the VLAN?
> I did mention i need it for both VM use, and host level use.
>
Forgot to mention that you can set host ip at that same vlan through the
same host network management
AH, I cant believe I didn't notice that before!
yup, in the engine GUI, under...
Hosts -> (specific host, click on it)
Network Interfaces -> [Setup Host Networks ]
and then AFTER I have dragged the desired new network/VLAN over to a specific
interface...
Then a little pencil icon
the 4.4.1 72310 node-ng iso has a broken installer. It failed to find my
regular ethernet interfaces and gave the no networks error.
The 4.4.2-rc seems to be working fine hosted-engine installer wise, to an
nfs mount for the engine VM storage. I didn't try the gluster wizard.
On Thu, Jul 30,
I have been using 7.6 (and rewntly migrated to 7.7) on my oVirt 4.3.10
withkut any issues so far.
Are you sure that it's not oVirt 4.4 specific ?
Best Regards,
Strahil Nikolov
На 30 юли 2020 г. 15:03:17 GMT+03:00, shadow emy написа:
>Good that is ok for you now.
>As Gianluca told you
Damn, those thick fingers...
На 30 юли 2020 г. 23:12:00 GMT+03:00, Strahil Nikolov
написа:
>I have been using 7.6 (and rewntly migrated to 7.7) on my oVirt 4.3.10
> withkut any issues so far.
>
>Are you sure that it's not oVirt 4.4 specific ?
>
>Best Regards,
>Strahil Nikolov
>
>На 30
Not quite done.
How do I then assign a host-level IP address in the VLAN?
I did mention i need it for both VM use, and host level use.
- Original Message -
From: "Alex K"
To: "Philip Brown"
Cc: "users"
Sent: Thursday, July 30, 2020 1:11:22 PM
Subject: Re: [ovirt-users] best way to
Following up, as noted in the bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=1860479 ) this doesn't appear to be
oVirt / VDSM having issues. You can replicate the same inability to attach a
bond to a bridge by simply booting the 8.2.2004 installation media and trying a
few manual
49 matches
Mail list logo
