[ovirt-users] ovirt change of email alert

e then activating them back does not resolve the issue. Seems I have to avoid defining email address during deploy and have it set only later at GUI. How one can recover from this situation? Thanx, Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Unable to add Hosts to Cluster

For a proper upgrade there are specific steps that you follow for each host and the engine. I usually upgrade the hosts first then the engine. If you have spare resources so as to put hosts at maintenance then the upgrade should be seamless. Also i think you need to go strp by step: 3.5 -> 3.6 ->

Re: [ovirt-users] Partition Trouble on oVirt Node

Did you try partprobe and pvscan before pvcreate? On Feb 16, 2018 01:23, "Matt Simonsen" wrote: > Hello all, > > This may not be oVirt specific (but it may be) so thank you in advance for > any assistance. > > I have a system installed with oVirt Node Next 4.1.9 that was

Re: [ovirt-users] Unable to connect to the graphic server

Original Message On February 15, 2018 12:52 AM, Yedidyah Bar David <d...@redhat.com> wrote: >On Wed, Feb 14, 2018 at 9:20 PM, Alex Bartonek a...@unix1337.com wrote: >> Original Message >> On February 14, 2018 2:23 AM, Yedidyah Bar David

Re: [ovirt-users] Unable to put Host into Maintenance mode

Yes you can. On Feb 15, 2018 23:09, "Mark Steele" wrote: > I have with no joy. > > Question: Can I restart the HostedEngine with running VM's without > negatively impacting them? > > > *** > *Mark Steele* > CIO / VP Technical Operations | TelVue Corporation > TelVue - We

Re: [ovirt-users] Unable to connect to the graphic server

Original Message On February 14, 2018 2:23 AM, Yedidyah Bar David <d...@redhat.com> wrote: >On Wed, Feb 14, 2018 at 5:20 AM, Alex Bartonek a...@unix1337.com wrote: >>I've built and rebuilt about 4 oVirt servers. Consider myself pretty good >> at this. LO

[ovirt-users] Unable to connect to the graphic server

I've built and rebuilt about 4 oVirt servers. Consider myself pretty good at this. LOL. So I am setting up a oVirt server for a friend on his r710. CentOS 7, ovirt 4.2. /etc/hosts has the correct IP and FQDN setup. When I build a VM and try to open a console session via SPICE I am unable

Re: [ovirt-users] Ovirt backups lead to unresponsive VM

Thank you Nir for the below. I am putting some comments inline in blue. On Tue, Feb 13, 2018 at 7:33 PM, Nir Soffer <nsof...@redhat.com> wrote: > On Wed, Jan 24, 2018 at 3:19 PM Alex K <rightkickt...@gmail.com> wrote: > >> Hi all, >> >> I have a cluster wit

Re: [ovirt-users] [ovirt-announce] [ANN] oVirt 4.2.1 Release is now available

Thanx! On Tue, Feb 13, 2018 at 12:54 PM, Sandro Bonazzola <sbona...@redhat.com> wrote: > > > 2018-02-13 11:42 GMT+01:00 Alex K <rightkickt...@gmail.com>: > >> Hi all, >> >> Is this version considered production ready? >> > > Yes, 4.

Re: [ovirt-users] [ovirt-announce] [ANN] oVirt 4.2.1 Release is now available

Hi all, Is this version considered production ready? Thanx, Alex On Mon, Feb 12, 2018 at 7:14 PM, Sandro Bonazzola <sbona...@redhat.com> wrote: > > > 2018-02-12 17:43 GMT+01:00 Gianluca Cecchi <gianluca.cec...@gmail.com>: > >> On Mon, Feb 12, 2018 at 4:22 PM

Re: [ovirt-users] ovirt 4.1 unable deploy HostedEngine on next host Configuration value not found: file=/etc/.../hosted-engine.conf

Hi, did you select "Deploy" when adding the new host? See attached. [image: Inline image 2] Thanx, Alex On Fri, Feb 9, 2018 at 9:53 AM, Reznikov Alexei <reznikov...@soskol.com> wrote: > Hi all! > > After upgrade from ovirt 4.0 to 4.1, a have trouble add to next

Re: [ovirt-users] Ovirt backups lead to unresponsive VM

Hi all, In case you need any further logs let me know. Thanx for the time. Alex On Thu, Feb 8, 2018 at 9:41 AM, Alex K <rightkickt...@gmail.com> wrote: > Hi Shani, > > Didn't notice that. > I am attaching later vdsm logs. > > Thanx, > Alex > > On Wed, Feb 7, 20

Re: [ovirt-users] ovirt and gateway behavior

Hi, I have seen hosts rendered unresponsive when gateway is lost. I will be able to provide more info once I prepare an environment and test this further. Thanx, Alex On Tue, Feb 6, 2018 at 10:40 AM, Yaniv Kaul <yk...@redhat.com> wrote: > > > On Feb 5, 2018 2:21 PM, "

Re: [ovirt-users] ovirt 4.2 vdsclient

error: {'reason': '__init__() takes exactly 2 arguments (1 given)'}) What other arguments does this expect. When using Host namespace I am able to run the available options. Thanx, Alex On Tue, Feb 6, 2018 at 10:24 AM, Benny Zlotnik <bzlot...@redhat.com> wrote: > It was replaced by vdsm

Re: [ovirt-users] ovirt and gateway behavior

Hi Edward, So this is not an expected behavior? I will collect logs as soon as I reproduce it. Thanx, Alex On Tue, Feb 6, 2018 at 9:36 AM, Edward Haas <eh...@redhat.com> wrote: > Hi Alex, > > Please provide Engine logs from when this is occurring and mention the > date/ti

[ovirt-users] ovirt 4.2 vdsclient

Hi all, I have a stuck snapshot removal from a VM which is blocking the VM to start. In ovirt 4.1 I was able to cancel the stuck task by running within SPM host: vdsClient -s 0 getAllTasksStatuses vdsClient -s 0 stopTask Is there a similar way to do at ovirt 4.2? Thanx, Alex

[ovirt-users] ovirt and gateway behavior

if the hosted VMs have connectivity to Internet or not. Can this behavior be disabled? Thanx, Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Problem creating NFS storage domain

Running oVirt 4.2. Creating a NFS storage domain, creates but fails with: Failed with error AcquireHostIdFailure Now, this is a new install of openmediavault. I can ssh from the oVirt server, access the NFS share (its mounted) and can create files etc. I'm sure its something small I'm

Re: [ovirt-users] Ovirt backups lead to unresponsive VM

Ok. I will reproduce and collect logs. Thanx, Alex On Jan 29, 2018 20:21, "Mahdi Adnan" <mahdi.ad...@outlook.com> wrote: I have Windows VMs, both client and server. if you provide the engine.log file we might have a look at it. -- Respectfully

Re: [ovirt-users] Ovirt backups lead to unresponsive VM

and Windows 10 VMs? The weird is that I have same setup on other clusters with no issues. Thanx, Alex On Sun, Jan 28, 2018 at 9:21 PM, Mahdi Adnan <mahdi.ad...@outlook.com> wrote: > Hi, > > We have a cluster of 17 nodes, backed by GlusterFS storage, and using this > same script for

[ovirt-users] Basic parts for rebuilding ovirt server

Kinda pleased with the way the restore went. Sucks that my backups weren't working like I thought. I did an engine backup, complete about a day before I lost data. Are these the basic steps: 1. Reinstall CentOS (whatever OS you used) 2. Update all packages 3. Install ovirt 4. Engine restore 5.

Re: [ovirt-users] Bad hd? or?

, Christopher Cox <c...@endlessnow.com> wrote: >checked /etc/mtab ? > > On 01/26/2018 06:10 PM, Alex Bartonek wrote: >>I'm stumped. >>I powercycled my server on accident and I cannot mount my data drive.  I >> was getting buffer i/o errors but finally was able to

[ovirt-users] Bad hd? or?

I'm stumped. I powercycled my server on accident and I cannot mount my data drive. I was getting buffer i/o errors but finally was able to boot up by disabling automount in fstab. I cannot mount my ext4 drive. Anything else I can check? root@blitzen t]# dmesg|grep sdb [1.714138] sd

[ovirt-users] Ovirt backups lead to unresponsive VM

the VM unresponsive) 3. Export Clone 4. Delete clone 5. Delete snapshot Do you have any similar experience? Any suggestions to address this? I have never seen such issue with hosted Linux VMs. The cluster has enough storage to accommodate the clone. Thanx, Alex

Re: [ovirt-users] oVirt storage access failure from host

Hi Martin, No deployments have been done and the servers have been restarted several time since then. I will go to ovirt 4.2 as soon as BZ - 1477589 is fixed. The false routing error blocks migration of VMs to the host with this error. Alex On Fri, Jan 19, 2018 at 4:29 PM, Martin Sivak <

[ovirt-users] oVirt storage access failure from host

tStats failed (error 1) in 0.00 seconds (__init__:539) No errors seen at gluster at same time frame. Any hints on what is causing this issue? It seems a storage access issue but gluster was up and volumes ok. The VMs that I am running on top are Windows 10 and Windows 2016 64 bit.

Re: [ovirt-users] Ovirt 4.2 Windows guest tools

Thanx, Installed and seems to be working nicely. Alex On Wed, Jan 17, 2018 at 8:36 AM, Yedidyah Bar David <d...@redhat.com> wrote: > On Tue, Jan 16, 2018 at 11:33 PM, Alex K <rightkickt...@gmail.com> wrote: > > Hi all, > > > > Is the ISO at > > http://

[ovirt-users] Ovirt 4.2 Windows guest tools

Hi all, Is the ISO at http://plain.resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetup/4.2-1.el7.centos/ the latest guest tools? I'm interested for Windows 2016 and Windows 10. Thanx, Alex ___ Users mailing list Users@ovirt.org http

[ovirt-users] 答复: 答复: How power-saving schedule policy applied?

ly or using some SDK). We were even working on it for a while, but it was put on backburner since sysadmins know cron well and the UI would have to be limited anyway. Best regards -- Martin Sivak SLA / oVirt On Tue, Jan 9, 2018 at 8:55 AM, Alex Shen <a...@bill-jc.com> wrote: > > Hi Marti

[ovirt-users] How power-saving schedule policy applied?

should turn on another host. If anyone had played power saving scheduling policy, please share me your scenarios or some hints. Thanks a lot. Alex --- Avast 防毒软件已对此电子邮件执行病毒检查。 https://www.avast.com/antivirus ___ Users mailing list Users@ovirt.org

Re: [ovirt-users] Guest CPU reported 100%

he "stuck VM" case I have observed more rarely. For the fake 100CPU% case, I suspect it could be sth with the guest agent drivers or sth between qemu and Win10 since I've never seen this with Windows 2016 server or Linux VMs. Alex On Mon, Jan 1, 2018 at 9:56 PM, Gianluca Cecchi <

[ovirt-users] Guest CPU reported 100%

reported with 100% CPU I cannot get a console at VM (console gives black screen) then I have to force shutdown the VM and start it up again. The only warning I see is in the qemu logs of the guest reporting that CPUs not present in any NUMA nodes. Any ideas how to tackle this? Thanx, Alex

Re: [ovirt-users] How to import OVA from oVirt 4.2 to oVirt 4.2

I used clonezilla and built the VM that way. If you get the OVA thing working, cool.. but in the meantime, here's how I did it using Clonezilla. https://www.unix1337.com/cloning-a-virtualbox-vm-to-ovirt-4-2/ Sent with [ProtonMail](https://protonmail.com) Secure Email. > Original

Re: [ovirt-users] Some questions

Did you add the virtscsi drivers? Sent from ProtonMail mobile Original Message On Dec 29, 2017, 11:57 AM, Pepe Pepe wrote: > Hello! > > I got some questions for you. > > 1. How can I acces to the User Portal from a different PC of my subnetwork > (appart from the one which

Re: [ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie

Have you tried 32bit Windows VM? It works that way. Sent from ProtonMail mobile Original Message On Dec 29, 2017, 12:04 AM, Blaster wrote: > On 12/27/2017 5:04 PM, Blaster wrote: >> On 12/27/2017 12:13 PM, Alex Bartonek wrote: >>> Got it working!!!

[ovirt-users] Test

test email. for some reason I do not receive messages from this mailing list. Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] How to import OVA from oVirt 4.2 to oVirt 4.2

Followed instructions here: https://www.ovirt.org/develop/release-management/features/virt/virt-v2v-integration/ Section: Importing OVA Files from VMware Even though its not VMWare, its an ova file so I followed the steps there. Ownership of the file is 777, wide open. Error after clicking

Re: [ovirt-users] Exporting/Copying VM to another oVirt server

[ovirt-users] Exporting/Copying VM to another oVirt server > Local Time: December 28, 2017 4:57 PM > UTC Time: December 28, 2017 10:57 PM > From: aha...@redhat.com > To: Alex Bartonek <a...@unix1337.com> > users <users@ovirt.org> > > Thanks. > It seems that it f

Re: [ovirt-users] Exporting/Copying VM to another oVirt server

Subject: Re: [ovirt-users] Exporting/Copying VM to another oVirt server > Local Time: December 28, 2017 4:20 PM > UTC Time: December 28, 2017 10:20 PM > From: aha...@redhat.com > To: Alex Bartonek <a...@unix1337.com> > users <users@ovirt.org> > > :/ > Can you ple

Re: [ovirt-users] Exporting/Copying VM to another oVirt server

017 10:11 PM > From: aha...@redhat.com > To: Alex Bartonek <a...@unix1337.com> > users <users@ovirt.org> > > Thanks. > Is the description of the disk of the VM empty? > If it is, please type some description and then try again. > > On Fri, Dec 29, 2017 a

Re: [ovirt-users] Exporting/Copying VM to another oVirt server

server > Local Time: December 28, 2017 3:18 PM > UTC Time: December 28, 2017 9:18 PM > From: aha...@redhat.com > To: Alex Bartonek <a...@unix1337.com> > users <users@ovirt.org> > > On Thu, Dec 28, 2017 at 10:46 PM, Alex Bartonek <a...@unix1337.com> wrote: > &

Re: [ovirt-users] Exporting/Copying VM to another oVirt server

Log uploaded to: http://textuploader.com/dc2be > Original Message > Subject: Re: [ovirt-users] Exporting/Copying VM to another oVirt server > Local Time: December 28, 2017 2:41 PM > UTC Time: December 28, 2017 8:41 PM > From: aha...@redhat.com > To: Alex Barto

[ovirt-users] Exporting/Copying VM to another oVirt server

After the success of getting my VM's working on my test server, I decided to wipe out another server I had and wanted to move my VMs to it. I tried the "Export" as ova and it seems to work but in the Tasks its red: "Exporting VM CentOS7 as an OVA to /ovirt_data/CentOS7.ova on Host junkHost".

Re: [ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie

nal Message > Subject: Re: [ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie > Local Time: December 27, 2017 11:05 AM > UTC Time: December 27, 2017 5:05 PM > From: blas...@556nato.com > To: Yaniv Kaul <yk...@redhat.com> > Alex Bartonek <a...@unix133

Re: [ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie

, 2017 11:02 AM > UTC Time: December 27, 2017 5:02 PM > From: blas...@556nato.com > To: Alex Bartonek <a...@unix1337.com> > users@ovirt.org <users@ovirt.org> > > I tried that back in July of 16 when I first reported the issue to this list. > I installed bare Win

Re: [ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie

otonMail](https://protonmail.com) Secure Email. > >> Original Message >> Subject: Re: [ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie >> Local Time: December 26, 2017 7:14 PM >> UTC Time: December 27, 2017 1:14 AM >> From: do...@fortnebula.com >&

Re: [ovirt-users] Assign external IP to VM

AM > UTC Time: December 27, 2017 7:20 AM > From: eh...@redhat.com > To: Alex Bartonek <a...@unix1337.com> > users@ovirt.org <users@ovirt.org> > > It is not clear what you did exactly, but, if I try to summarize, this setup > should work for you: > - Create a ne

Re: [ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie

Yea I'm going to have to find a way to run Blue Iris in Win 7. Zoneminder, while free, just isn't as good. Sent from ProtonMail mobile Original Message On Dec 26, 2017, 8:10 PM, Alex Bartonek wrote: > Yep..found that already. Still have the same issue. TBH, I'm look

Re: [ovirt-users] Assign external IP to VM

ct: Re: [ovirt-users] Assign external IP to VM > Local Time: December 26, 2017 8:17 PM > UTC Time: December 27, 2017 2:17 AM > From: do...@fortnebula.com > To: Alex Bartonek <a...@unix1337.com> > users@ovirt.org <users@ovirt.org> > > Are you using built in nics on your

Re: [ovirt-users] Assign external IP to VM

it. Thanks! Sent with [ProtonMail](https://protonmail.com) Secure Email. > Original Message > Subject: Re: [ovirt-users] Assign external IP to VM > Local Time: December 26, 2017 7:17 PM > UTC Time: December 27, 2017 1:17 AM > From: do...@fortnebula.com >

Re: [ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie

) Secure Email. > Original Message > Subject: Re: [ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie > Local Time: December 26, 2017 7:14 PM > UTC Time: December 27, 2017 1:14 AM > From: do...@fortnebula.com > To: Alex Bartonek <a...@unix1337.com>

Re: [ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie

e Iris no workie > Local Time: December 26, 2017 3:36 PM > UTC Time: December 26, 2017 9:36 PM > From: yk...@redhat.com > To: Alex Bartonek <a...@unix1337.com> > Ovirt Users <users@ovirt.org> > > On Dec 26, 2017 10:49 PM, "Alex Bartonek" <a...@unix1337.com&

[ovirt-users] Assign external IP to VM

Need some guidance on this one. Config: 1U with 2 NICs. NIC 1 plugged to local switch - gets local IP NIC 2 plugged direct to cable modem - need to set IP inside VM to public static IP VM will be CentOS, already know how to configure NIC once I can get the 2nd NIC assigned to it. Do I use PCI

[ovirt-users] ovirt 4.2 + Win 7 64bit VM + Blue Iris no workie

I have a dl360 g5 with a Xeon 5160 cpu, installed 4.2, Win 7 64 bit in a VM. Installed the virtio drivers also. Plain jane Win 7 setup, nothing extra. Installed Blue Iris. When I run Blue Iris, it blue screens. Anyone got Blue Iris to work under 4.2 in a Windows

Re: [ovirt-users] Issue starting VM using run-once

Nevermind. Its because I had VirtualBox running which had a 64bit OS VM which requires VT-x extensions. oVirt and VB both cannot use it at the same time. All is well once I disable the extension in the VB VM. It'll be migrated to oVirt. Sent with [ProtonMail](https://protonmail.com)

[ovirt-users] Issue starting VM using run-once

Merry Christmas to you all.. New install of oVirt 4.2 on a CentOS 7 system. Watched a vid and read some stuff on the site regarding installation/config. I have it installed using this vid: https://www.youtube.com/watch?v=Pasz-lv3gTY Single server host. When I go to run my Windows 7 64bit VM

Re: [ovirt-users] strange problems with engine

Hi, Didi yes, your advicewith  --otopi-environment=OVESETUP_CONFIG/continueSetupOnHEVM=bool:True       has helped, thanks )   23.11.2017, 21:42, "Yedidyah Bar David" :On Fri, Nov 17, 2017 at 3:53 PM, wrote: hi! I have caught a problem. hosted-engine unexpectedly

[ovirt-users] strange problems with engine

hi! I have caught a problem. hosted-engine unexpectedly stop working with error in log: 2017-11-14 01:47:02,628+09 ERROR [org.ovirt.engine.core.bll.InitBackendServicesOnStartupBean] (ServerService Thread Pool -- 54) [7ce64f75-6eee-4d8c-9693-521cf0c6cebb] Failed to initialize backend:

Re: [ovirt-users] VM leases errors

Filed *Bug 1507214* <https://bugzilla.redhat.com/show_bug.cgi?id=1507214> for this issue Alex On Wed, Oct 18, 2017 at 3:36 PM, Nir Soffer <nsof...@redhat.com> wrote: > On Wed, Oct 18, 2017 at 2:31 PM Alex K <rightkickt...@gmail.com> wrote: > >> For anyone that m

Re: [ovirt-users] Cannot uplaod ot ISO domain

Narra" <kna...@redhat.com> wrote: > Hi Alex, > > Can you check if you have the following on your setup ? > > 1) gluster volume which will be used as ISO storage domain should have > bricks connected using glusternw. > 2) NFS time out is caused due to not having nfs

Re: [ovirt-users] Cannot uplaod ot ISO domain

domain. Alex On Thu, Oct 19, 2017 at 12:09 AM, Alex K <rightkickt...@gmail.com> wrote: > If this is the case then I will try to set the gluster network to be at > the network that engine can reach prior to adding the ISO domain. I would > prefere not to add an additional inte

Re: [ovirt-users] Cannot uplaod ot ISO domain

performance of storage network. Alex On Oct 18, 2017 11:36 PM, "Elad Ben Aharon" <ebena...@redhat.com> wrote: > Hi, > > The storage where 'ISO' storage domain resides has to be reachable for the > engine server. Please check network connectivity between the two. >

[ovirt-users] Cannot uplaod ot ISO domain

each host? Thanx, Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] VM leases errors

job order by start_time desc; select DeleteJob(''); Alex On Wed, Oct 18, 2017 at 1:07 PM, Alex K <rightkickt...@gmail.com> wrote: > Hi all, > > While attempting to enable the VM leases for a specific VM I am receiving > the following error within the engine.log: > &

[ovirt-users] VM leases errors

o lsit any running tasks: vdsClient -s 0 getAllTasksStatuses {'status': {'message': 'OK', 'code': 0}, 'allTasksStatus': {}} Any ideas? Than, Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] VM remote noVNC console

have two minutes to connect from downloading the vv file before > the password expires. > > On 5 October 2017 at 22:58, Alex K <rightkickt...@gmail.com> wrote: > > Any idea how this can be addressed? > > > > > > On Sep 19, 2017 23:07, "Alex K" <r

Re: [ovirt-users] VM remote noVNC console

Any idea how this can be addressed? On Sep 19, 2017 23:07, "Alex K" <rightkickt...@gmail.com> wrote: Hi all, I am trying to get the VM console of a VM through SSH socks proxy. This is a scenario I will frequently face, as the ovirt cluster will be available only though a remot

[ovirt-users] VM remote noVNC console

saying "Unable to connect to libvirt with URI [none]' With noVNC I get a separate tab on browser where it is stuck showing "loading". Has anyone success with this kind of remote console access? Thanx, Alex ___ Users mailing list Users

Re: [ovirt-users] oVirt HA behavior

On Tue, Sep 19, 2017 at 2:26 PM, Arik Hadas <aha...@redhat.com> wrote: > > On Tue, Sep 19, 2017 at 12:44 PM, Alex K <rightkickt...@gmail.com> wrote: > >> A second test did not yield the same result. >> This time the VMs were restarted to another host and when

Re: [ovirt-users] oVirt HA behavior

A second test did not yield the same result. This time the VMs were restarted to another host and when the lost host recovered no VMs were running on it. Seems that there is a racing issue somewhere. Thanx, Alex On Tue, Sep 19, 2017 at 11:52 AM, Arik Hadas <aha...@redhat.com>

Re: [ovirt-users] oVirt HA behavior

decide at some point to shutdown the paused VMs and continue with the VMs that are already running at other hosts. Is this behavior normal? Thanx, Alex On Tue, Sep 19, 2017 at 10:18 AM, Alex K <rightkickt...@gmail.com> wrote: > Hi All, > > Just completed the tests and it works great

Re: [ovirt-users] oVirt HA behavior

Hi All, Just completed the tests and it works great. VM leases is just what I needed. Thanx, Alex On Tue, Sep 19, 2017 at 10:16 AM, Yaniv Kaul <yk...@redhat.com> wrote: > > > On Tue, Sep 19, 2017 at 1:00 AM, Alex K <rightkickt...@gmail.com> wrote: > >> Enablin

Re: [ovirt-users] oVirt HA behavior

Enabling VM leases could be an answer to this. Will test tomorrow. Thanx, Alex On Sep 18, 2017 7:50 PM, "Alex K" <rightkickt...@gmail.com> wrote: Hi All, I have the following issue with the HA behavior of oVirt 4.1 and need to check with you if there is any work around from you

[ovirt-users] oVirt HA behavior

if this behavior can be tweaked. Thanx, Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] oVirt console without disconnecting user

console window at VM of user and in the same time allow the user to continue the session while me observing the user session, similar as when connecting with VNC? Thanx, Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo

Re: [ovirt-users] gluster replica volumes with different data usage

Ok, noted... Will reconfigure this volume from scratch. Thanx, Alex On Mon, Sep 18, 2017 at 9:31 AM, Ravishankar N <ravishan...@redhat.com> wrote: > Possibly. I don't think changing shard size on the fly is supported, > especially when there are files on the volume that

Re: [ovirt-users] gluster replica volumes with different data usage

size at some point from 4 MB to 64MB. Could this be the cause? Thanx, Alex On Mon, Sep 18, 2017 at 8:14 AM, Ravishankar N <ravishan...@redhat.com> wrote: > > On 09/18/2017 10:08 AM, Alex K wrote: > > Hi Ravishankar, > > I am not referring to the arbiter volume(which is

Re: [ovirt-users] gluster replica volumes with different data usage

usage of data on the data volumes, except the "vms" volume used for storing vms. Thanx, Alex On Sep 18, 2017 07:00, "Ravishankar N" <ravishan...@redhat.com> wrote: > > > On 09/17/2017 08:41 PM, Alex K wrote: > > Hi all, > > I have replica 3 wit

Re: [ovirt-users] Manual transfer of VMs from DC to DC

to qcow or raw then importing it with some perl script. I guess that the OVA import/export feature, still to be implemented, is what I need for this case. Thanx, Alex On Sep 17, 2017 10:13, "Fred Rolland" <froll...@redhat.com> wrote: > Hi, > > You could import the

[ovirt-users] gluster replica volumes with different data usage

Hi all, I have replica 3 with 1 arbiter. When checking the gluster volume bricks they are reported as using different space, as per attached. How come they use different space? One would expect to use exactly the same space since they are replica. Thanx, Alex

Re: [ovirt-users] Recommended gluster setup

mmm, perhaps one more reason to go to simple replica 3... Thanx, Alex On Fri, Sep 15, 2017 at 3:30 PM, Sahina Bose <sab...@redhat.com> wrote: > > > On Fri, Sep 15, 2017 at 5:48 PM, Alex K <rightkickt...@gmail.com> wrote: > >> In the replica 3 + 1 arbiter does thi

Re: [ovirt-users] Recommended gluster setup

In the replica 3 + 1 arbiter does this mean that if I loose the two nodes having the normal volumes and left only with the node that has the arbiter volume, I loose all data? Thanx, Alex On Fri, Sep 15, 2017 at 11:25 AM, Kasturi Narra <kna...@redhat.com> wrote: > Hi , > >yes

Re: [ovirt-users] Seamless SAN HA failovers with oVirt?

: this is with iSCSI resources. I've not really run VMs in oVirt in anger against any kind of NFS storage yet. My boss wants to try Tintri, so I'll see how that works. Cheers Alex On 06/06/17 18:45, Matthew Trent wrote: Thanks for the replies, all! Yep, Chris is right. TrueNAS HA is active/passive

Re: [ovirt-users] Issue with deploy HostedEngine on second host with Ovirt 4.1

Yes, all storage domains, hosted-engine storage domain and VMs are visible in the ovirt-GUI   26.05.2017, 22:00, "Simone Tiraboschi" :Are the hosted-engine storage domain and the engine VM correctly visible in the engine? On Fri, May 26, 2017 at 2:50 PM, a...@rt14.ru

[ovirt-users] Issue with deploy HostedEngine on second host with Ovirt 4.1

Hi everybody!I get some issue with HA configuration of HostedEngine: I am trying to deploy it to second host: 1. Set maintenance for host2. Do reinstall with HostedEngine Deploy option Installation finished successfully, I did't observe any errors in logs, but host did't became HostedEngine ready. 

Re: [ovirt-users] ovirtmgmt network out of sync

upgraded too: oVirt Engine Version: 4.1.1.8-1.el7.centos I dont recall the version I was on prior to the upgrade but I am sure it was at least v4. Shall I just tar everying thing in /var/log/vdsm/ ? -Alex On Wed, May 17, 2017 at 10:07 AM, Michael Burman <mbur...@redhat.com> wrote:

Re: [ovirt-users] ovirtmgmt network out of sync

not an option. I mentioned in my first email that this is a single host that is used for development only. That is why I ask if there is a why to perform the networksync via CLI, or perhaps manually? -Alex On Tue, May 16, 2017 at 11:30 PM, Michael Burman <mbur...@redhat.com> wrote: >

Re: [ovirt-users] ovirtmgmt network out of sync

doing both a packet-tracer and reviewing the logs. I think the problem is this "out-of-sync" network issue? -Alex On Tue, May 16, 2017 at 10:12 PM, Michael Burman <mbur...@redhat.com> wrote: > Hello Alex, > > - Have you tried to sync it using the 'Sync All Networks' bu

Re: [ovirt-users] ovirtmgmt network out of sync

No one has suggestions on how I can sync the ovirtmgmt network? Is more information needed? On May 12, 2017 10:43 AM, "Alex R" <ar.dig...@gmail.com> wrote: > Hi, > > I upgraded to the latest version (users@ovirt.org) a few weeks ago and > ever since then I canno

[ovirt-users] ovirtmgmt network out of sync

Hi, I upgraded to the latest version (users@ovirt.org) a few weeks ago and ever since then I cannot open a console unless I am on the local network ( 10.3.1.0/24). I think it is related to the Ovirtmgmt interface being "out-of-sync". If I try to fix it in the gui, I get an error: "Error while

Re: [ovirt-users] How to change DATA to ISO domain

Create a new DATA domain with what you really need. Then make that the master and put the old one into maintenance and remove it. That should do what you need. Cheers Alex On 02/05/17 15:13, Langley, Robert wrote: I went to add my ISO domain as the first storage domain. It got created

Re: [ovirt-users] oVirt global utilization trend

the data is not there) the >DWH >database does not have the completely 24 hours worth of data, if you >wait it >will rotate the missing data out and eventually the 24 hours worth of >data >will appear. > >> Thanx, >> Alex -- Sent from my Android device with K-9

Re: [ovirt-users] Ovirt importing VM

That was sneaky! Thank you Arik. cheers, Alex On March 5, 2017 1:46:04 PM GMT+02:00, Arik Hadas <aha...@redhat.com> wrote: >On Thu, Mar 2, 2017 at 10:48 AM, rightkicktech.gmail.com < >rightkickt...@gmail.com> wrote: > >> Hi, >> >> I am using Virt4.1 on to

Re: [ovirt-users] Ovirt FQDN

ied to add also localhost as alternate fqdn without any luck. Any idea? Many thanx, Alex On January 27, 2017 1:10:33 AM GMT+02:00, Alex <rightkickt...@gmail.com> wrote: >Thank you Martin. >I will check that. > >On January 26, 2017 9:39:42 PM GMT+02:00, Martin Perina >&

Re: [ovirt-users] Ovirt FQDN

revious versions I was able to access ovirt engine using IP. It is >> impractical to access with FQDN when doing remote port forwarding. >> >> Thanx, >> Alex >> -- >> Sent from my Android device with K-9 Mail. Please excuse my brevity. >> __

Re: [ovirt-users] import graylog VM fails

t 2:38 AM, Alex R <ar.dig...@gmail.com> wrote: > >> >> 1dae7037-73d5-4f11-b7da-c5d1a6aa36b7 >> >> # qemu-img convert -O raw /tmp/graylog-2.1.2-1.qcow2 >> /rhev/data-center/mnt/blockSD/6643dec0-12b2-4764-9473-a86975 >> ef523d/images/1dae7037-73d5-4f11-b7da

[ovirt-users] import graylog VM fails

=`a1257117-e3f8-4896-9ab4-1b010298f282`::Changed state to Down: internal error: qemu unexpectedly closed the monitor: (process:23124): GLib-WARNING **: gmem.c:482: custom memory allocation vtable not supported. Thanks in advance. -Alex ___ Users ma

Re: [ovirt-users] Fwd: Multipath iSCSI with several IPs

know which one should use as failover? No, multipath is the *same* storage (ie LUN) exposed via two different network paths. Alex -- This message is intended only for the addressee and may contain confidential information. Unless you are that person, you may not disclose its contents or use

Re: [ovirt-users] Host non operationnal due to an iSCSI problem

t you can't do when it's running VMs. I believe it stops certain services as well, not sure which ones. It's perfectly safe and routine thing to do in RHEV/oVirt. Cheers Alex -- This message is intended only for the addressee and may contain confidential information. Unless you are that person,

Re: [ovirt-users] Host non operationnal due to an iSCSI problem

faces on the host and initiator are in different IP subnets (and should ideally travel via different switches but that is not a hard requirement). If you only have one physical interface on each host, there's not much point doing multipath, as you don't stand to gain any performance or resil

<    1   2   3   4   5   6   7   >