I've got a 4 node cluster running oVirt 4.2.7. 3 hosts are
hyperconverged with glusterfs. Engine is running on one of the gluster
volumes. Since yesterday, the cluster is completely unstable and will
not reliably run VMs including the Engine. A notification will pop up
in the WebUI stating
Hello all,
I've been looking around but I've not found anything definitive on whether
Ovirt can do NFS Multipathing, and if so how?
Does anyone have any good how tos or configuration guides?
Thanks,
Thomas
___
Users mailing list -- users
Working on migrating from 4.1 to 4.2 on new hardware. Hit a snag importing a
VM, and the VM won’t start.
* Cannot run VM. No more than one unmanaged USB controller is expected for
a VM.
[cid:555F4AC2-4498-461D-AAEF-0B1BC5BC7C91@cola.local]
Any thoughts on how to remove the extra USB con
d CPU are fine ( maximum 50% system load - average 30% ).
File system is XFS - Raid 4 is used
From: Juan Pablo
Sent: Montag, 4. Juni 2018 21:10
To: Thomas Fecke
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Storage IO
Hi Thomas, so you are seeing high load on your storage and you are asking
Hey Guys,
sorry i need to ask again.
We got 2 Hypervisor with about 50 running VM´s and a single Storage with 10 Gig
connection.
Device: rrqm/s wrqm/s r/s w/srkB/swkB/s avgrq-sz
avgqu-sz await r_await w_await svctm %util
sda 3,00 694,00 1627,00 9
Dear Martin,
yes, that's a good improvement!
Just to let you know: The alignment of database and host ids did work
and thus we now have everything aligned and will have an improved output
because of your changes, thanks!
Best regards,
Thomas
> Hi Thomas,
>
> I posted https://ge
.conf config file (it seems to be
overwritten after a few seconds - I suppose it's copied from somewhere?)
Thanks,
Thomas
> Hi,
>
> the vnc device is there by default (I copied it out of my own hosted
> engine instance), I do not know why it was missing in your case.
>
> Best reg
quot; -> ovirt3 will sooner or later cause confusion and will
lead to administrative actions applied to the wrong hosts.
I'll give it a try and try to align the hosts and ids. I'll backup the
old values in order to be able to roll back the changes if it does not work.
Thanks for your hel
leads me to the next question:
Is there a manual way to align numbers in the hostnames with the SPM
IDs? (oVirt4 should be spm id 4)
Does this work? Update the database, change the entry in
hosted-engine.conf and then reboot the node?
Thanks & best regards,
Thomas
>
>
> On Mon,
when adding a new host via GUI)?
* Is there an option to preselect the host id in the GUI for a new node?
* How can we prevent further duplicate host ids?
Thanks and best regards,
Thomas
--
________
1033,67 2446,67 38390,6772,56
5,665,061,835,35 0,88 99,50
Any Idea why we got so much write Requests? Its getting up to 2000.
I guess the IO is from our Windows VM´s
From: users-boun...@ovirt.org On Behalf Of Thomas
Fecke
Sent: Dienstag, 17. April 2018 16:18
To
Guest: Win 10 and 2016
Disk: VirtISCSI – Thin provision
Domain: Single Data Domain – NFS 4
From: Roy Golan
Sent: Dienstag, 17. April 2018 12:58
To: Thomas Fecke
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Performance Issue
On Tue, 17 Apr 2018 at 12:58 Thomas Fecke
mailto:thomas.fe
about 25Mbit/s external ( 400.000 k Internet )
I realy cant find that bottle neck
From: Roy Golan
Sent: Dienstag, 17. April 2018 11:52
To: Thomas Fecke
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Performance Issue
On Tue, 17 Apr 2018 at 12:45 Thomas Fecke
mailto:thomas.fe...@eset.de>>
users-boun...@ovirt.org On Behalf Of Thomas
Fecke
Sent: Dienstag, 17. April 2018 10:58
To: users@ovirt.org
Subject: [ovirt-users] Performance Issue
Hey Guys,
We Deploy a lot of Templates. We got our Training Environment build in Ovirt.
Our Problem - when we Deploy the Same Template. The VM´s ge
Hey Guys,
We Deploy a lot of Templates. We got our Training Environment build in Ovirt.
Our Problem - when we Deploy the Same Template. The VM´s getting slower every
Time we deply a new VM from that Template.
And I really don't know why. RAM locking good - CPU and Network looking good.
But it
Dear Martin,
thanks, ok, good to know. We have a hosted engine that was created on
ovirt 3.x and after that has only been updated.
Maybe this is the cause.
Thanks for your help again.
Best regards,
Thomas
> Hi,
>
> the vnc device is there by default (I copied it out of my own hosted
- compared to a bare metal setup with display
and keyboard.
Wouldn't it be a good idea to have the vnc device in the config by default?
Best regards,
Thomas
> You need to be in global maintenance, but I think you already know that.
> Then try updating the vm.conf like you already did a
t; passed as command line parameter to
qemu and thus, I suppose, there's no display.
Any help is appreciated, thanks,
Thomas
> Hi,
>
> the serial console will show output if the kernel knows to use it.
>
> The VNC approach is also possible and I believe we already have a
now. Should the serial
console show any output during boot?
Thanks for your help,
Thomas
--
Dipl.-Inform. Thomas Klute kl...@ingenit.com
Geschä
e sure
'connect to physical network' is checked, and the correct network from
step 5 is picked. Save this off.
This will connect the two networks together in a bridge, and all
services are visible to both ie dhcp, dns..
7) when you create the VM, select the OVN n
o use 4.2.x, which in a vlan
environment just wreaks havoc (every VLAN need's a unique mac assigned
to the bridge, which vdsm does not do, so suddenly you get the kernel
complaining about seeing it's mac address several times.)
There is zero documentation on how to use OVN instead of O
wipe
since the 4.1 engine has been upgraded so many times from v3.5 plus we want
to move to hosted-engine-ha from a single engine node and the ansible
modules/roles (which also have problems..)
thomas
On Tue, Mar 13, 2018 at 6:27 AM, Edward Haas wrote:
>
> OVS switch support is experimental a
__call__
return callMethod()
File "/usr/lib/python2.7/site-packages/vdsm/common/supervdsm.py", line 53, in
**kwargs)
File "", line 2, in network_caps
File "/usr/lib64/python2.7/multiprocessing/managers.py", line 773, in
_callmethod
raise convert_to_error(kind, result)
IOError: [Errno 19] ovirtmgmt is not present in the system
So something is dreadfully wrong with the bridge to ovs conversion in 4.2.2rc3.
thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
[mailto:yk...@redhat.com]
Sent: Montag, 5. März 2018 11:08
To: Thomas Fecke
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Any Kind of Storage IO Limitation?
On Mon, Mar 5, 2018 at 8:24 AM, Thomas Fecke
mailto:thomas.fe...@eset.de>> wrote:
Hey Guys,
I got a kind of strange Question:
We go
Hey Guys,
I got a kind of strange Question:
We got some Hypervisors connected to an x86 Storage ( NFS )
The Machines are connected via 10 Gbit with that Storage. When I try to rsync
some Files we reach almost the Maximum Bandwidth.
But, when I copy some VM´s, Templates or do something Stroage
Hey Guys,
We got about 50 Users and 50 VLANS. Every User has his own Vlan.
With 4.1 they could login in that User Portal. Select an Template or create a
new VM. Add a Disk and connect to there Nic.
I see that is no option to add a Disk anymore with 4.2 -> okay that's fine for
me
So they just
Hey Guys,
Just upgrade to 4.2.2 and still the same Issue.
Someone found a Solution?
From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of
carl langlois
Sent: Freitag, 26. Januar 2018 15:19
To: gior...@di.unimi.it
Cc: users
Subject: Re: [ovirt-users] Permission on Vm and U
Hey dear Community,
I work a bit with that ovirt shell. That worked pretty fine but I got some
Problems when I try to add Permission:
What I want to do:
Add a Role to an VM
What I did:
add permission --parent-vm-name vm1 --user-id user1 --role-id UserVmCreator
Error:
status: 500
reason: Inte
In playing with this, I found that 4.2.1 hosted-engine will not install
on a node with the ovirtmgmt interface being a vlan.
Is this a still supported config? I see that access port, bonded and
vlan tagged are supported by older versions..
thomas
On 02/05/2018 08:16 AM, Simone Tiraboschi
Thanks Yaniv, that looks like a perfect starting point!
Thomas
On Sun, Feb 11, 2018, 1:36 AM Yaniv Kaul wrote:
> On Sat, Feb 10, 2018 at 5:47 PM, Thomas Letherby
> wrote:
>
>> That's exactly what I needed to know, thanks all.
>>
>> I'll schedule a script f
That's exactly what I needed to know, thanks all.
I'll schedule a script for the nodes to reboot and patch once every week or
two and then I can let it run without me needing to worry about it.
Thomas
On Fri, Feb 9, 2018, 2:26 AM Martin Sivak wrote:
> Hi,
>
> the hosts a
Thanks, that answers my follow up question! :)
My concern is that I could have a host off-line for a month say, is that
going to cause any issues?
Thanks,
Thomas
On Thu, Feb 8, 2018 at 3:12 AM Staniforth, Paul <
p.stanifo...@leedsbeckett.ac.uk> wrote:
> Hello,
>
>
resources of one host, so to save power I'd like to keep the other two
offline until needed.
I can always script them to boot once a week or so if I need to.
Thanks,
Thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/lis
'cpuSys': '0.00', 'vcpuPeriod':
10L, 'timeOffset': '0', 'clientIp': '', 'pauseCode': 'NOERR',
'vcpuQuota': '-1'}}
Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available.
Feb 02 11:55:13 d8-r13-c2-n1 vdsm[7654]: WARN MOM not available, KSM stats
will be missing.
Feb 02 11:55:17 d8-r13-c2-n1 vdsm[7654]: WARN ping was deprecated in favor
of ping2 and confirmConnectivity
Do I need to install a complete ovirt-engine on the node first, bring the
node into ovirt, then bring up hosted-engine? I'd like to avoid this and
just go straight to hosted-engine setup.
thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hello Guys,
i recently upgrade to 4.2
We used the User Portal before. Every User could see his VM´s, every Admin just
could see his VM´s ( User View ).
After the Update:
Admin´s can see every VM in VM Portal
The Users can´t see Vm´s anymore. The Portal is Empty. Role "UserVMManager" is
set.
freundlichen Grüßen / Best regards,
Thomas Fecke
Pre Sales Specialist
+49 3641 3114 205
[ESET]
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - -
ESET Deutschland GmbH
Spitzweidenweg 32
07743 Jena
Deutschland
www.eset.de<http://www.eset.de/>
Amt
Hey Guys,
i worked with an ovirt envirnoment the last Weeks. Everythink worked fine
until i reboot the Manager.
When i access the GUI i recive - 404-not Found
When i restart the engine it seems to stop at
2017-09-05 13:43:33,491+02 INFO [org.ovirt.engine.core.bll.ServiceLoader]
(ServerService
As a follow-up for future reference. Re-running engine-setup with the same
config file solved all my issues. I can now long into the website, and run
VM’s again.
> On Jun 5, 2017, at 5:12 AM, Thomas Wakefield wrote:
>
>
>> On Jun 5, 2017, at 2:24 AM, Yedidyah Bar David w
Is it possible to force a connection to existing storage domains from a new
engine? I have a cluster that I can’t get the web console to restart, but
everything else is working. So I want to know if it’s possible to just remount
those storage domains to the new engine?
Also, how do I clear an
> On Jun 5, 2017, at 2:24 AM, Yedidyah Bar David wrote:
>
> On Mon, Jun 5, 2017 at 4:44 AM, Thomas Wakefield wrote:
>> After a reboot I can’t access the management ovirt-engine webpage anymore.
>>
>>
>> server.log line that looks bad:
>&g
After a reboot I can’t access the management ovirt-engine webpage anymore.
server.log line that looks bad:
2017-06-04 21:35:55,652-04 ERROR [org.jboss.as.controller.management-operation]
(DeploymentScanner-threads - 2) WFLYCTL0190: Step handler
org.jboss.as.server.deployment.DeploymentHandlerU
On 02/23/2017 12:53 AM, Yedidyah Bar David wrote:
On Thu, Feb 23, 2017 at 6:17 AM, Thomas Davis wrote:
I am getting this error message:
Unexpected character ('<' (code 60)): expected a valid value (number,
String, array, object, 'true', 'false' or 'n
and in the engine.log.
Any ideas one what it is looking for this?
This ovirt setup has gone from 3.5 -> 3.6 -> 4.0 -> 4.1.
I am currently blocked on doing any VM management in ovirt due to this..
thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hey Yuval,
If there is a way to download 4.0.6 and use it to upgrade the 4.0.3 node, I
have not found that documentation yet. Is that how I'm suppose to do it? Do
you have any links I can reference?
Thanks,
Thomas
On Feb 9, 2017 3:51 AM, "Yuval Turgeman" wrote:
Hi, so 4.0.6
installed
with 4.0.3, and I would like to bring them up to the same version as
everything else.
For reference, the 4.0.3 nodes were built off the 4.0-2016083011 iso, and
the 4.0.6 nodes were built off the 4.0-2017011712 iso.
Thanks,
Thomas
___
Users ma
a bug in the cinder integration?
Thanks and best regards,
Thomas
engine.log:
2016-11-21 10:00:20,216 INFO [org.ovirt.engine.core.bll.CloneVmCommand]
(default task-19) [2dd83801] Lock Acquired to object
'EngineLock:{exclusiveLocks='[vm-vertr-kp-klon=]',
sharedLocks='[897d96c
0.1-1.el7.centos.x86_64
ovirt-host-deploy-1.5.2-1.el7.centos.noarch
ovirt-imageio-proxy-0.4.0-0.201608310602.gita9b573b.el7.centos.noarch
ovirt-engine-websocket-proxy-4.0.4.4-1.el7.centos.noarch
ovirt-engine-vmconsole-proxy-helper-4.0.4.4-1.el7.centos.noar
/pub/ovirt-4.0-snapshot/iso/
Seems to be 4.0.2 but nightly and thus unstable?
Thanks for the clarification,
best regards,
Thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
015 9:36 AM, "Simone Tiraboschi" wrote:
>
>
> On Tue, Dec 1, 2015 at 3:24 PM, Thomas Scofield
> wrote:
>
>> I did import the lun into the engine. I had the hosted engine running
>> for a few days and I was able to restart it a number of times. It wasn'
rote:
>
>
> On Tue, Dec 1, 2015 at 2:07 PM, Thomas Scofield
> wrote:
>
>> Are there different instructions for an iscsi domain? I was able to find
>> the proper path at /rhev/data-center/mnt/blockSD/$sdUUID/images/$
>> conf_image_UUID/$conf_volume_UUID but the tar c
errors
This was a relatively recent fresh install, the setup log is attached.
On Tue, Dec 1, 2015 at 5:54 AM, Simone Tiraboschi
wrote:
>
>
> On Tue, Dec 1, 2015 at 12:55 AM, Thomas Scofield
> wrote:
>
>> That file is missing
>>
>> [root@ovirt01 vdsm]# ls -l /var/r
t 9:48 PM, Thomas Scofield
> wrote:
>
>> I have recently setup a ovirt hosted engine on iscsi storage and after a
>> reboot of the system I am unable to start the hosted engine. The agent.log
>> gives errors indicating there is a missing value in the vm.conf file, but
>>
I have recently setup a ovirt hosted engine on iscsi storage and after a
reboot of the system I am unable to start the hosted engine. The agent.log
gives errors indicating there is a missing value in the vm.conf file, but
the vm.conf file does not appear in the location indicated. There is no
err
ou done a
live-backup solution for oVirt? Are there any recommendations? Thanks for any
help provided!
Best regards
Thomas Keppler
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
there though, I can only see the IP addresses I used to
communicate with oVirt (on the internal 1Gbps NIC).
I have tried creating another network and bound all my nodes to it - still no
success.
Any ideas how I can do this?
--
Best regards
Thomas Keppler
__
I am trying to add a second path to my iSCSI LUNs but I can’t get the
changes to persist. I can get the SPM to login to the second path, and
from the server side the multipath –ll output looks good. I can then move
the SPM around to force all the other systems to login to the iSCSI LUNs.
But when
Since upgrading our ovirt setup from 3.2 to 3.3 we have run into some
issues with the ovirt-engine becoming non responsive. The first few times
we just cycled the server and moved on with things, but the problem kept
re-occurring. After digging into the server.log we identified a number of
errors
rote:
>
>
> ----- Original Message -
> > From: "Thomas Scofield"
> > To: "users"
> > Sent: Wednesday, September 17, 2014 4:56:15 AM
> > Subject: [ovirt-users] Virtual Machines reporting as paused
> >
> >
> >
> > A large number
A large number of my virtual machines are reporting in a paused state but
they are actually up and running. Unfortunately I don't look at this
cluster very often so I don't know exactly when it got into this state, I
believe it may have happened a couple months back when I deployed a change
to /etc
Ok, I managed to update with: yum --exclude=sos/* update
I am seeing this on upgrade as well. So far I have not found a solution.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
I am seeing this on upgrade as well. So far I have not found a solution.
On Mon 21 Apr 2014 12:48:20 AM PDT, Udaya Kiran P wrote:
Hi,
I am trying to install oVirt-Engine on Fedora-19. I am getting the below
transaction check error while executing 'yum -y install ovirt-engine' command.
Please
did not fix this issue.
Does anyone have an idea about what's happening ? I'm new with oVirt and I
don't know what to do to solve this.
Thanks for your help !
Regards,
Thomas LANGÉ
2014-03-12 11:34:34,430 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDire
How can I regenerate the ovirt engine CA certs and corresponding vdsm
certs? I have an ovirt setup that I'm upgrading from 3.2.0 (from the dre
repos) to 3.2.3 and I am getting the certificate errors listed below after
the upgrade. I have done this same upgrade on an number of other
ovirt-engines
ould ideally have an identifying mark of which portal it
is for.
The horizontal scroll is disappointing on the user portal. I don't think
"Number of cores" should be larger than ALL other headings on the page.
Good work, excited to see it.
-
Thomas
___
ode: 1006)
Should be:
Manage Certificates... > Authorities Tab > Import
Regardless, installing your own certificate is preferred.
You don't even have to buy one, you can get as many basic one year certs
as you need for free from startcom.
-
Thomas
_
On 01/13/2014 09:50 AM, Neil Schulz wrote:
So, this is the only way to stop having to accept the cert?
I'd have to tell all our clients to download and install that cert to
their workstation?
No.
You can replace the Websocket Proxy certs referenced by
/etc/ovirt-engine/ovirt-websocket-prox
change
what the host reports to the guest, which makes me think the guest is
supposed to magically just know.
What is the proper way to deal with this situation?
-
Thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo
lso, unless there is some feature I don't know about, ovirt doesn't
screw with VM internals. My ovirtmgt network is the same as my main network.
¯\(°_°)/¯
-
Thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
significantly it could become unresponsive.
-
Thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
the problem should
go away and was probably the original intent of the spec file writer.
getent group ovirtagent >/dev/null || groupadd -r -g 175 ovirtagent
to
getent group ovirtagent >/dev/null || groupadd -r -g 175 -o ovirtagent
Still needs conflict with rhev agent though.
esire.
Thanks,
Gianluca
Why not just reuse the rhev-agent username, it is what it is reserved
as? Then just add a conflict with the rhev RPM so they cannot be
installed together.
Though upgrading systems using ovirt-guest-agent username would be tricky.
-
Thomas
___
If I am not mistaken, the EL6 builds do not support native Gluster,
which in his case may be "nice to have".
-
Thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
os.O_RDWR)
OSError: [Errno 2] No such file or directory:
'/dev/virtio-ports/com.redhat.rhevm.vdsm'
Sure enough, there is only org.qemu.guest_agent.0 in there.
Halted the VM and started it again and then it was all shiny with
com.redhat.rhevm.vdsm com.redhat.spice.0 org.qemu.gue
On 11/22/2013 10:53 AM, Itamar Heim wrote:
On 11/22/2013 05:18 PM, Gianluca Cecchi wrote:
On Fri, Nov 22, 2013 at 8:08 AM, Gianluca Cecchi wrote:
On Fri, Nov 22, 2013 at 2:18 AM, Itamar Heim wrote:
i guess no one asked for one till now so its not built.
I knew I was the last one on earth sup
On 11/21/2013 05:08 PM, Itamar Heim wrote:
On 11/22/2013 03:04 AM, Thomas Suckow wrote:
Ok, so what about an el5 guest agent? The github repo
https://github.com/oVirt/ovirt-guest-agent hints at there being support
for el5, but it is incompatible with the automake version in el5. Is
there a
Ok, so what about an el5 guest agent? The github repo
https://github.com/oVirt/ovirt-guest-agent hints at there being support
for el5, but it is incompatible with the automake version in el5. Is
there a prebuilt rpm somewhere that I am missing?
--
Thomas
On 11/21/2013 12:33 PM, Itamar Heim wrote:
On 11/21/2013 08:27 PM, Thomas Suckow wrote:
I am running several RHEL6 vms in ovirt. I am looking to install the
guest agent.
The releases repo has ovirt-guest-agent-common and EPEL has
ovirt-guest-agent. Which of these should I use?
I see in the
the guest agent?
-
Thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
L_KEY is just the unencrypted key, and it MUST be accessible by the
ovirt user.
As for spice, I am not sure, I am guessing it is
/etc/pki/ovirt-engine/keys/engine_id_rsa and
/etc/pki/ovirt-engine/keys/certs/engine.cer
Not sure where they are referenced except by the websocket proxy.
--
T
when the GUI
login is displayed) the mouse cursor gets messed up and clicking only
clicks the upper left corner of the screen.
* The SSL key has to be readable by the ovirt user rather than root
*cough*. Maybe the proxy_wstunnel apache module could be of use to avoid
SSL in the plugin.
--
Thomas
While building a virtual machine we ran into an error "Not enough MAC
addresses left in MAC Address Pool." In the engine log I see this message.
2013-10-26 14:47:16,590 WARN
[org.ovirt.engine.core.bll.network.vm.AddVmInterfaceCommand] (ajp--127.0.0.
1-8702-12) [6fc05fa4] CanDoAction of action Ad
On 10/25/2013 11:24 AM, David Sloane wrote:
My understanding of Docker is that it provides a lighter-weight alternative to
jboss or tomcat, but I'm not sure how much you would extend ovirt with a java
application server.
DS
Docker is meant for binary applications, it "virtualizes" an os
envir
block the connection.
-
Thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
3.3 is now in ovirt-stable, as of the last hour. What you see is
happening because the window is too narrow, this would happen on any
browser. Try maximizing.
-
Thomas
On 09/16/2013 10:29 AM, Gianluca Cecchi wrote:
Firefox on CentOS 6.4 ( version firefox-17.0.8-1.el6.centos.x86_64)
gives
On 09/13/2013 10:24 PM, Gianluca Cecchi wrote:
On Sat, Sep 14, 2013 at 1:52 AM, Thomas Suckow wrote:
Everything was completely broken until I disabled NetworkManager, it seemed
to be doing something with the bridge despite NM_MANAGED=no
Donna if it was only a copy/paste typo, but just in ase
On 09/13/2013 09:28 AM, Suckow, Thomas J wrote:
On 09/13/2013 04:29 AM, Greg Sheremeta wrote:
Did this get resolved? Is there a BZ? (I can't find one.) I am also seeing "The Hosts
emulated machines are " on yesterday's nightly build. The host I'm trying
to add is a VM
On 09/04/2013 09:42 PM, Markus Stockhausen wrote:
Hello,
just in case someone else got this problem. For me it seems to be a naming
convention problem. ifcfg file names did not match the shown interfaces.
Steps to fix it included:
- rename ifcfg-enp1s0, ... scripts to real interface names ifcfg
old Dell Precision.
My previous attempt was "normal" install and then tried to add
localhost. I wonder if the all in one would give different results.
-
Thomas
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
On 09/11/2013 08:09 AM, Mike Burns wrote:
* 3.3 release status (mburns, 14:03:53)
* no open blockers at the moment, release just pending successful
testi
If you guys are looking for another tester of all-in-one before monday,
I am willing to try in our environment on a clean install
issue. Maybe these people are just disabling it
and not saying anything?
-
Thomas
On 09/04/2013 09:42 PM, Markus Stockhausen wrote:
Hello,
just in case someone else got this problem. For me it seems to be a naming
convention problem. ifcfg file names did not match the shown interfaces.
Steps to
et to '/var/run/libvirt/libvirt-sock': No such file or directory
Aug 27 03:36:26 we13196 systemd-vdsmd[815]: vdsm: Failed to define network
filters on libvirt[FAILED]
Aug 27 03:36:26 we13196 systemd[1]: vdsmd.service: control process exited,
code=exited status=1
Aug 27 03:36:26 we13196
Snippets of what seems possibly relevant:
https://gist.github.com/thomassuckow/995f422cd5c46c6de98c
messages seems mostly happy with the exception of a crash in
"/usr/bin/vdsm-tool" related to ksmtuned, not sure if relevant
The engine.log shows the error I mentioned before:
... Message: Host
The engine does not support localhost (loopback) as an address for network
management.
You have to use a real interface with real address.
I did also try the systems "real" IP and it did not seem to change
anything with regards to:
The Hosts emulated machines are and the cluster is [rhel6.
I attempted to setup and all-in-one solution on Fedora 19. I ran through the install
which made a default data center and cluster. I created a host with 127.0.0.1 and then
attempted to add the bridge that the test day documentation states does not get handled
properly. After many reboots and di
- that is, before
> > sending the AD query.
> >
> >
> >
> >
> > Eli - looks like this is from the SeachQuery.InitQueryData - can you
> > elaborate here?
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > __
I was attempting to assign some permissions to Active Directory groups and
ran into an issue where groups with spaces or the # sign in them. The
engine log contained messages like these
2013-05-22 08:39:35,228 WARN [org.ovirt.engine.core.bll.SearchQuery]
(ajp--127.0.0.1-8702-134) ResourceManager
Are you able to run the fence_drace5 command from the command line? I had
some trouble getting the fence agent working on a drac6 management
interface, I made some notes in the wiki
http://www.ovirt.org/Automatic_Fencing#Troubleshooting. When testing make
sure to specify an action, the default ac
I ran into this recently but I haven't had a chance to test the solution
that I came up with.
psql engine postgres -c "update vdc_options set option_value = '0' where
option_name = 'VmGracefulShutdownTimeout';"
The bigger problem I had is if you do a forced shutdown (click twice on the
stop icon)
I have run into a scenario after installing the client agent. If a VM is
shutdown, the client agent calls the shutdown command with a 1 minute
timeout.
Dummy-2::INFO::2013-03-28 14:05:21,892::vdsAgentLogic::138::root::Shutting
down (timeout = 30, message = 'System Administrator has initiated shut
An old vdsm agent was the source of some of my issues. After updating to
4.10.3 I was able to get it working, the options are being passed now. I
had to add a login_timeout as well since one of the drac interfaces is a
bit slow on login.
cmd_prompt=admin,login_timeout=15
On Fri, Mar 22, 2013 a
301 - 400 of 412 matches
Mail list logo