Le vendredi 11 juillet 2008 à 09:12 +0200, Tony Grant a écrit :
freesat:
Can't get a lock on BBC News 24 since yesterday is it just me?
Still not lock and 42% STNR on BBC News
Is no one else having problems with theis channel?
I have also lost the channel 4 group of channels although
Hi,
freesat:
Can't get a lock on BBC News 24 since yesterday is it just me?
I have also lost the channel 4 group of channels although femon reports
lock.
Have these channels changed their transponder (again)?
Cheers
Tony
--
___
vdr mailing list
Le vendredi 18 avril 2008 à 06:26 +1200, Simon Baxter a écrit :
Has anyone tested running an EPIA ML6000 fanless motherboard with vdr-xine?
It is a CLE266 it will work just fine
The spec's only say MPEG-2 Accelerator rather than Decoder/Accelerator -
will it work with a VGA 1366x768 16:9
Le vendredi 28 mars 2008 à 19:28 +, Andy Carter a écrit :
Check
Setup-DVB-Update channels
and select your preferred option
Thanks!
It has been a long time since I went in there... =:-D
Tony
--
___
vdr mailing list
vdr@linuxtv.org
Reinhard,
I decided to try vdr 1.6.0 and vdr-xine 0.8.2 and have ran into the XINE
VDR VERSION MISMATCH in INSTALL issue.
I am running xine-lib 1.2 pulled from the xine site
pkg-config --cflags libxine
-I/usr/local/include
I can't see what is wrong
Cheers
Tony
--
Le jeudi 27 mars 2008 à 12:15 +0100, Gregoire Favre a écrit :
I use this in order to be sure I only got ONE xine-lib installed :
Thanks Gregoire but I only have one xine-lib installed. This is a clean
FC8 with xine-lib 1.2 installed from hg.
Trying an update of xine-lib now (4 hours on a VIA
Le jeudi 27 mars 2008 à 12:54 +0100, Gregoire Favre a écrit :
Trying an update of xine-lib now (4 hours on a VIA Epia M1)
I am quiete certain that you still have some files from the previous
version... you don't have to recompil all, just delete all files in the
location you installed
OK I now have the following set up:
- hush with VIA Epia M1
- Fedora Core 8 up to date except libX11*
- xine-lib 1.2 from hg today 27/03/2008
- vdr 1.6.0
- vdr-xine 0.8.2
- femon 1.2.4
- vdradmin-am-3.6.1
*In order to use xine with xxmc
Le vendredi 21 mars 2008 à 12:43 +0100, serge pecher a écrit :
As I understand, I have different sources, with different resolutions. Is
there a manner to tell vdr-xine or xine to adapt the output as good as
possible to my tv screen ?
try the -f option
Tony
--
Hello fans of British TV.
At the moment I watch the FTA channels on 28.2/28.5 E I am thinking of
investing £20 in a FTV card for the new freesat service.
Is anyone using the card (or the sky card for existing service) with
VDR? What kind of DVB-S card do you have (budget or FF)? What brand?
At
Le vendredi 29 février 2008 à 11:57 +0200, Theunis Potgieter a écrit :
How about Western Digital Mybook World Edition
- USB
- EN 1000
- serial port on MB
Still has the 32MB RAM limitation. Debian has been installed in place
of the stock linux. And there is 500/750/1000
Le jeudi 28 février 2008 à 12:03 +0100, Gregoire Favre a écrit :
even if my english is quiete limited, I really enjoy the program from
the BBC (S13.0E/S19.2E/S28.2E) which are FTA :-)
The only thing I miss is an epg of more than current and next.
Hi Grégoire,
I use xmltv and xmltv2vdr I
Le jeudi 28 février 2008 à 20:57 +0100, Brian a écrit :
Problem is that Bleb no longer has all the channels, copyright problems.
Thats why I no longer use it. I use the solution pointed out by Tony
Grant, it works perfectly well. You can customize which channel's epg it
should retrieve
Le mercredi 06 février 2008 à 09:58 +, Laz a écrit :
I don't think MPEG4 decoding will be supported in this way for a very long
time, unless Via have changed their attitudes. (Not really bothered
looking into this because HD is years off in the UK where I am, unless
you fork out lots
Le mercredi 06 février 2008 à 17:29 +0200, JJussi a écrit :
HD needs to be shown at sizes where the extra pixels are worth our while
I don't have 3000€ to put into a screen.
But some of us do! ;-)
I would probably spend a lot more time - enough to justify the cost - in
front of TV if I
Le samedi 02 février 2008 à 13:13 +0100, Hans Gustafsson a écrit :
I got rid of the xine blue screen/hang by downgrading libX11 and
libX11-devel to the ones from fedora 7 :)
OK it works. It puts CPU usage up about 2-5%. I'll tell the openchrome
and xine people.
Cheers
Tony
--
Le mardi 29 janvier 2008 à 13:00 +0100, Ales Jurik a écrit :
On Tuesday 29 January 2008, Matthias Fechner wrote:
I modified now the Makefile and added the following lines after the
include of the conf file:
ifdef DVBDIR
INCLUDES += -I$(DVBDIR)/include
endif
For plugins which are
Le lundi 28 janvier 2008 à 09:44 +0100, Ondrej Wisniewski a écrit :
I am experimenting with xineliboutput using the xxmc video driver for
the local sxfe frontend on an EPIA-M1 board with CLE266. I have the
OpenChrome Drivers installed.
MPEG2 HW decoding seems usually to work, I get
Le lundi 28 janvier 2008 à 12:07 +0100, Ondrej Wisniewski a écrit :
There is a problem with xine, the openchrome driver and VDR. You are too
slow - I am seeing 9-12% CPU with current openchrome even with this bug.
I am using vdr-xine rather than xineliboutput
snip
that was not the
Le jeudi 17 janvier 2008 à 19:40 +0100, Reinhard Nissl a écrit :
There exists already a fixed version of libxcb but it is not
available for a stock openSUSE 10.3. On the other hand, my EPIA
MII-6000E runs openSUSE 10.3 too, using the binary openchrome
driver package provided at
I pulled the dvb drivers with mercurial made and installed. Nothing has
changed:
Fire up vdr-xine which tunes to BBC 1 (horizintal polarization)
vdr-xine: Client connected!
[vaAVM]buffered 35,1 frames (v:39,0, a:35,1)
frame: (0, 0)-(720, 576), zoom: (1,00, 1,00)
Picture and sound perfect
Le jeudi 17 janvier 2008 à 17:53 +0100, Reinhard Nissl a écrit :
Can you provide an excerpt of VDR's logfile with the content from
switching to channel up to jan 17 10:25:01?
Easier, I just switched channels and it stops
Tony
Jan 17 18:34:24 hush vdr: [4551] codeset is 'UTF-8' - known
Jan
Le jeudi 17 janvier 2008 à 19:40 +0100, Reinhard Nissl a écrit :
100% CPU but it changes channels.
Maybe -V xv relaxes CPU load a bit.
Yes but sound eventually cuts out.
Well, on my openSUSE 10.3 I cannot use xxmc anymore with my
GF6600 as it dead locks for the same reason. openSUSE
OK so I fixed all my issues with my clean install of vdr and vdr-xine in
Fedora Core 8 except one:
- switching from horizontal to vertical polarization does not work,
screen goes black, xine stops responding
- I can record vertical polarized channels and play back the recording
Le dimanche 13 janvier 2008 à 22:35 +0100, Gregoire Favre a écrit :
ITV1
London;BSkyB:10758:vC56S0Z0:S28.2E:22000:2305:2310=eng,2314=NAR:2315:0:10060:2:2044:0
I have recorded from it and can see recording but it is not visible as
live TV
Does that help?
Tony
--
I noticed that I could no longer see channels with vertical polarisation
- this used to work must have stopped last week.
Channels:
BBC 2 England;BSkyB:10773:hC56:S28.2E:22000:... etc. works
ITV1 London;BSkyB:10759:vC56:S28.2E:22000:... blanks screen
vdr 1.5.13, vdr-xine 0.8
Any ideas?
Le dimanche 13 janvier 2008 à 17:33 +0100, Gregoire Favre a écrit :
I can't test vdr-1.5.13 because a VDR without DVB-S2 isn't fun at all,
but with vdr-1.5.12 with DVB-S2 support I can perfectly tune to :
ITV1
Le dimanche 13 janvier 2008 à 17:33 +0100, Gregoire Favre a écrit :
On Sun, Jan 13, 2008 at 05:08:24PM +0100, Tony Grant wrote:
I noticed that I could no longer see channels with vertical polarisation
- this used to work must have stopped last week.
Channels:
BBC 2 England;BSkyB
Le jeudi 29 novembre 2007 à 17:05 +, Chris Jones a écrit :
Has anyone tried VGA out at 1600x1050 on a FullHD (Sony Bravia for
example)? If so what does it look like.
I've used a PC connected to a 40 Bravia via DVI and it was pretty damn
good. If you sat far enough away you could use
Le mardi 13 novembre 2007 à 14:50 +, Darren Salt a écrit :
- it doesn't require me to recompile libxine
Neither does vdr-xine (if you're using xine-lib-1.2).
affirmative! I am running xine-lib-1.2 and vdr-xine 0.8.0 at last no
more messing with patching xine-lib
My problems:
Hello,
Linowsat
(http://www.linowsat.com/settings/vdr/unsorted/0282/fta-tv.conf)
has listings for both Channel 4 and Five as FTA. I know they are FTV on
Sky. When I try to watch I have EPG data and femon shows signal but I
have no image or sound. Is this a Linowsat error or am I doing something
Le mercredi 24 octobre 2007 à 09:04 +0200, Reinhard Nissl a écrit :
The picture was very good, but there was dropped frames that xine
reported and the stuttered on occassion and then ran very quickly to
catch up. Playing around with the settings in xine (setting threads to
2 etc) didn't
Le mercredi 24 octobre 2007 à 09:47 +0200, Reinhard Nissl a écrit :
xine-lib-1.2 is only available from the hg repository. Please follow
this guide:
OK I have lib-1.2 and vdr-xine-0.8.0 humming along. Image very clean and
CPU usage is down another 5%. I will see if the new version of
Le vendredi 19 octobre 2007 à 19:48 +0200, Reinhard Nissl a écrit :
Have you tried --verbose=2 -V xv and verified from the output, that
video_out_xv is used?
yes it is
Cheers
Tony
--
___
vdr mailing list
vdr@linuxtv.org
Le vendredi 19 octobre 2007 à 19:48 +0200, Reinhard Nissl a écrit :
- any attempt at using the xine configuration dialog results in a lock
up
Hmm, I've upgraded to openSUSE 10.3 this morning. I now get such dead
locks when using -V xxmc. The deadlock happens for simple libX11
Hi,
I thought I would try this
First a question asked on the Forum that did not get a reply:
- PCM volume is being turned down to 0 which is very annoying
Where do I change these settings?
SetDigitalAudioDevice: 0
SetAudioChannelDevice: 0
The new versions of VDR and xine plugin:
Le mardi 02 octobre 2007 à 08:48 +0200, Ondrej Wisniewski a écrit :
How did you enable the MPEG2 decoder? I enabled the xxmc option in xine
(xvmc caused crashes). Are there other ways?
xxmc is the correct way - I have a desktop launcher shell script to
start xine with options -V xxmc -fg
Le lundi 01 octobre 2007 à 07:44 +1300, Simon Baxter a écrit :
I'm currently running a Shuttle SK43G with the via/unichrome chipset,
running a budget card and using vdr-xine as a softdevice. Since
recently adding an LCD 16:9 I'm now running it at 1360x768 with xine
anamorphic, to get 4:3
Le lundi 01 octobre 2007 à 09:24 +0100, Torgeir Veimo a écrit :
On Mon, 2007-10-01 at 08:02 +0200, Tony Grant wrote:
I'm in the throws of buying an EPIA SP8000EG or SP13000 with the
mpeg2/4 accelerator. Has anyone had experience with these and 16:9
through x-windows?
I have
Le mercredi 05 septembre 2007 à 13:10 +0200, Nicolas Huillard a écrit :
Nice setup - but the case is too big for me. I have a single glass panel
shelf, the case can be 11.5 deep maximum..
I went for a heavily customized CD player... Count 1-2 days drilling and
cutting to fit the
Le jeudi 15 février 2007 à 00:12 +0100, Rob Davis a écrit :
What I am after is an ordered channel list in the same order as the
official decoders from different providers. ie, someone from outside
the UK wouldn't necessarily know that the channels go:
BBC 1, 2 , ITV 1, Ch 4, five. Then
Le jeudi 15 février 2007 à 09:15 +0100, Rob Davis a écrit :
If you wanted to have the same numbers as a Sky Digibox.
OK I see.
I am a very basic viewer who just zaps around on a whim recording the
odd film now and then and of course MotoGP. Since we moved my VDR box
died (bad capacitors)
Le lundi 05 février 2007 à 17:49 +0100, Brian a écrit :
BBC3 and BBC4 only start to show programs at 19:00 UK time. My EPG for
these programs comes via the internet. If I try to look at the EPG for
those channels before 19:00, then they are not even shown in the list of
programs I have
Le lundi 22 janvier 2007 à 19:54 -0500, Russell Treleaven a écrit :
I would like to make the system very small.
http://www.gentoo.org/proj/en/base/embedded/gnap.xml
Because you asked... Here you are rambling up the wrong track. Sorry!
Read the page carefully, do you see HTPC or PVR? No.
Le dimanche 21 janvier 2007 à 21:19 -0500, Russell Treleaven a écrit :
A mail with correct subject line! Congratulations! =:-D
Is VDR the correct tool?
I am not sure that vdr is the best tool for recording/time
shifting/whatever encrypted analog video. It is the best tool for
digital (DVB-S,
45 matches
Mail list logo