On 21.04.2013 18:11, Michael Smith wrote:
Hi,
I've switched from DVB-S to DVB-T usb dongle with ITE9135 chipset and I'm
trying to record an AVC channel.
I'm using VDR-1.7.27.
Every thing OK when I use VDR with streamdev plugin. In fact I've set my system
to stream channels for more than 10
Hi,
I've switched from DVB-S to DVB-T usb dongle with ITE9135 chipset and I'm
trying to record an AVC channel.
I'm using VDR-1.7.27.
Every thing OK when I use VDR with streamdev plugin. In fact I've set my
system to stream channels for more than 10 days. But after I create a timer
to record my
As much as I like the EPG scan, I usually have it turned off because
I think the driver gets rather unstable when VDR often switches
channels and maybe hits transponders that don't carry any signal.
What's especially unstable is the CAM situation. I have two CAMs
in my VDR (connected to budget
Searching for this error found numerous posts on the mailing list from
old releases, but nothing recent so I wanted to query it again...
I've recently started seeing quite a few instances of a vdr throwing
this error (ERROR: video data stream broken) and then initiating an
emergency exit. I'm not
On 19 September 2011 12:17, Dominic Evans oldma...@gmail.com wrote:
I've recently started seeing quite a few instances of a vdr throwing
this error (ERROR: video data stream broken) and then initiating an
emergency exit.
fyi, looking in the logs, this does seem to happen whilst VDR is
rapidly
You might want to check dynamite plugin. If you have different drivers
for the different cards you can let it reload that specific driver.
If you just want to kick out that tuner until the next reboot (or
whatever), thats possible too.
2011/9/19 Dominic Evans oldma...@gmail.com:
On 19 September
Hi,
On Mon, Sep 19, Dominic Evans wrote:
Rather than having VDR emergency exit on this error, is it possible to
have it just continue?
yes, if you set EmergencyExit = 0 in the setup.conf file (or via osd
menu).
--
best regards
Dieter
--
I do not get viruses because I do not use MS
On 19/09/11 13:31, Dieter Bloms wrote:
Rather than having VDR emergency exit on this error, is it possible to
have it just continue?
yes, if you set EmergencyExit = 0 in the setup.conf file (or via osd
menu).
Excellent thanks.
For now I've set:
EmergencyExit = 0
EPGScanTimeout = 0
Hi,
Am 19.09.2011 14:13, schrieb Steffen Barszus:
You might want to check dynamite plugin. If you have different drivers
for the different cards you can let it reload that specific driver.
If you just want to kick out that tuner until the next reboot (or
whatever), thats possible too.
That's
On 19.09.2011 18:31, L. Hanisch wrote:
Hi,
Am 19.09.2011 14:13, schrieb Steffen Barszus:
You might want to check dynamite plugin. If you have different drivers
for the different cards you can let it reload that specific driver.
If you just want to kick out that tuner until the next reboot (or
Can anybody else help me with this? :(
On 4/10/11, John Klimek jkli...@gmail.com wrote:
Hmmm, is that the right patch that you linked to?
It appears to fix an I-frame detection problem and not a picture start
code problem. (The patch fails on vdr 1.7.17, but it looks like it
belongs inside
I'm trying to record from an MPEG-2 stream and I'm getting an error
ERROR: video data stream broken.
I've narrowed down the problem to remux.c where it's looking for the
Picture Start Code (0x0100) and it's never finding it so it's
timing out. I'm not exactly sure why this is happening since
Hi
Did you try this patch ?
http://permalink.gmane.org/gmane.linux.vdr/42765
We have the same kind of problem in France, picture start code equal zero and
not 1 as define in mpeg standard
@+
Le Sunday 10 April 2011 22:09:31 John Klimek, vous avez écrit :
I'm trying to record from an MPEG-2
Hmmm, is that the right patch that you linked to?
It appears to fix an I-frame detection problem and not a picture start
code problem. (The patch fails on vdr 1.7.17, but it looks like it
belongs inside the if statement for the picture start code [ie. it
only executes that code after the start
Hi Siegfried,
Siegfried Haas wrote:
I´m using vdr1.4.7 on a Suse10.3 with one FF-DVB-S-Card (technotrend
rev.1.3) and one budget DVB-T (winTV nova).
Everything worked well until yesterday.
When I turned on the TV there was no output on the TV and when one timer
started recording vdr
Matthias Fechner schrieb:
Hi Siegfried,
Siegfried Haas wrote:
I´m using vdr1.4.7 on a Suse10.3 with one FF-DVB-S-Card (technotrend
rev.1.3) and one budget DVB-T (winTV nova).
Everything worked well until yesterday.
When I turned on the TV there was no output on the TV and when one
Sorry to bother this list but maybe someone could help me.
I´m using vdr1.4.7 on a Suse10.3 with one FF-DVB-S-Card (technotrend
rev.1.3) and one budget DVB-T (winTV nova).
Everything worked well until yesterday.
When I turned on the TV there was no output on the TV and when one timer
started
Hi,
Dieter Bloms wrote:
my primary dvb card works fine on both of my Twin-LNB connectors.
I can switch the second card via szap and get a video stream via
cat /dev/dvb/adapter1/dvr0 /tmp/bla on H and V channels.
VDR doesn't get data any data from H channels, but gets data from V
channels.
Hi,
On Fri, Feb 16, bastlir wrote:
vdr can record from senders on V polarisation like sat1, prosieben ...
even without reloading the driver.
vdr can not record from any sender on H polarisation like ard, zdf ...
even with reloading the driver it doesn't work.
This explains, that I got
Hi,
On Thu, Feb 15, Dieter Bloms wrote:
no diseqc setup works stabel for me :(
Also the Full DiSEqC sequence from default diseqc.conf doesn't work
a few hours after reboot and sometime it doesn't work directly after
reboot.
But I can switch the channel with szap and get the TS stream from
On Friday 16 February 2007 13:48, Dieter Bloms wrote:
Hi,
On Thu, Feb 15, Dieter Bloms wrote:
no diseqc setup works stabel for me :(
I can reproduce following:
vdr can record from senders on V polarisation like sat1, prosieben ...
even without reloading the driver.
vdr can not record
Hi,
Dieter Bloms wrote:
t: 1171143387,098, c: 1, r: 0, a:
--
t: 1171143387,099, c: 1, r: 0, a: ioctl(fd_frontend, FE_SET_TONE,
SEC_TONE_OFF)
t: 1171143387,100, c: 1, r: 0, a: ioctl(fd_frontend, FE_SET_VOLTAGE,
SEC_VOLTAGE_13)
t:
Hi Reinhard,
On Sun, Feb 11, Reinhard Nissl wrote:
I'd like you to do some further tests by modifying diseqc.conf:
I will do each setup for about 1 week and will see, if I miss some
recordings and let you about the results.
A) let's remove FE_DISEQC_SEND_MASTER_CMD and FE_DISEQC_SEND_BURST
Hi,
Dieter Bloms wrote:
Feb 9 12:02:00 video vdr: [30529] switching device 2 to channel 1
Feb 9 12:02:09 video vdr: [30537] frontend 1 timed out while tuning to
channel 1, tp 111836
Feb 9 12:02:32 video vdr: [30603] ERROR: video data stream broken
so why can I get ts streams from the
Hi,
Dieter Bloms wrote:
Feb 9 12:02:00 video vdr: [30529] switching device 2 to channel 1
Feb 9 12:02:09 video vdr: [30537] frontend 1 timed out while tuning to
channel 1, tp 111836
Feb 9 12:02:32 video vdr: [30603] ERROR: video data stream broken
so why can I get ts streams from the
Hi,
On Sat, Feb 10, Reinhard Nissl wrote:
szap always sends DiSEqC commands, so I'd suggest to use VDR's
diseqc.conf. It's default section Full DiSEqC sequence is identical to
the tuning sequence that szap uses.
You may want to try the attached szap and VDR patch. You'll then get
some
Hi,
Dieter Bloms wrote:
szap always sends DiSEqC commands, so I'd suggest to use VDR's
diseqc.conf. It's default section Full DiSEqC sequence is identical to
the tuning sequence that szap uses.
You may want to try the attached szap and VDR patch. You'll then get
some output while tuning.
Hi,
On Sat, Feb 10, Reinhard Nissl wrote:
Don't know. But have you tried DiSEqC with VDR (menu Settings - LNB)?
no, because I didn't install any diseqc switches.
I had also an empty diseqc.conf
You might get similar messages but on the other hand, it might work ;-)
ok, now I have installed
Hi,
with strace I can see, that vdr tries to open video0 and audio0, which
aren't there.
Do they have to exist for nova cards ?
video:/var/service/vdr # grep adapter1 /tmp/vdr-1.5.0.strace
access(/dev/dvb/adapter1/frontend0, F_OK) = 0
open(/dev/dvb/adapter1/frontend0, O_RDONLY) = 10
29 matches
Mail list logo
