I only have the problem you mentioned on my iPad while using spotlight.
- Original Message -
From: "Richard Turner"
To:
Sent: Thursday, April 02, 2015 6:04 AM
Subject: Re: Can anyone tell me how to assemble the scanjig.
Actually, I was only referring to the shelf. I fin
he top and bottom. That
>> way I know that I'm getting the full page. That position worked great.
>> Be sure the iPhone is flush against the device holder so the camera isn't
>> angling downward.
>> HTH,
>> Richard
>>
>>
>>
>>
>&g
etting the full page. That position worked great.
> Be sure the iPhone is flush against the device holder so the camera isn't
> angling downward.
> HTH,
> Richard
>
>
>
>
>> On Apr 1, 2015, at 1:01 PM, Annie Skov Nielsen
>> wrote:
>>
>> Hi.
That position worked great.
Be sure the iPhone is flush against the device holder so the camera isn't
angling downward.
HTH,
Richard
> On Apr 1, 2015, at 1:01 PM, Annie Skov Nielsen
> wrote:
>
> Hi.
>
> I have figured out how to assemble the scanjig, but I think it re
plus, I'll try and catch her a little later today and try it out.
I'll send more details then.
Do you have the 6 plus in a case?
If so, which case?
Richard
> On Apr 1, 2015, at 1:01 PM, Annie Skov Nielsen
> wrote:
>
> Hi.
>
> I have figured out how to assemble
Hi.
I have figured out how to assemble the scanjig, but I think it requires sighted
assistance to be sure to get everything correct angled with the stopps.
It is not fitting my 6 plus perfect.
Best regards Annie.
> Den 01/04/2015 kl. 10.49 skrev Annie Skov Nielsen
> :
>
> Hi all.
Hi all.
I have got my scanjig, but I can not figure out how to assemble it, can anyone
tell me. There are also some peaces that I do not know how to use.
Thank you an advance.
Best regards Annie.
--
The following information is important for all members of the viphone list. All
new members t
Did you get this figured out yet? I can try to help if needed.
-Original Message-
From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf Of
Kathy Blackburn
Sent: Sunday, January 11, 2015 6:51 PM
To: viphone@googlegroups.com
Subject: I'm mystified by the ScanJig
OK, the plastic piece with all the holes is called the Device holder. The large
oval hole is near the top and the metal angle brace is on the back. The bottom
of that piece has some rectangle holes at the bottom that the clips on the
floor of the ScanJig hook into.
The long thin plastic piece
Ours is a household of two blind people, so I don't have sighted help at
my beck and call. I have received the ScanJig. I scanned the document
that purports to explain setting it up. I understand the purpose of
devices like the StandScan and ScanJig, but I am completely puzzled by
the Sc
e: The ScanJig
Both the device holder and the document shelf should be at an angle. When you
open the ScanJig, that lid, which is also the document holder, should open so
that it is leaning back at an angle.
Then, when you put the device holder in one of the four slots, it should be at
a similar
Both the device holder and the document shelf should be at an angle. When you
open the ScanJig, that lid, which is also the document holder, should open so
that it is leaning back at an angle.
Then, when you put the device holder in one of the four slots, it should be at
a similar angle. If you
<mailto:richard.pe...@earthlink.net> richard.pe...@earthlink.net
713-529-4476
From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf Of
Richard Turner
Sent: Monday, December 29, 2014 11:33 PM
To: viphone@googlegroups.com
Subject: Re: The ScanJig
That metal st
s the leading cause of stress for those who are in touch with it.
Jane Wagner, from In Search of Intelligent Life in the Universe
Sent from my iPhone 5S
> On Dec 29, 2014, at 5:55 PM, Richard Petty
> wrote:
>
> After my previously reported concern about shipping cost for the
&g
After my previously reported concern about shipping cost for the
ScanJig-which was completely resolved by the manufacturer-I was happily
surprised to receive the unit by mail today, a very short shipping time.
The ScanJig is indeed far more sturdy than the ScanStand. It's well made an
Dan,
Here is an updated version of my original message that started this thread in
answer to your question.
OK, I now have seen what I consider the Cadillac of stands.
I got the ScanJig at work Monday. I used KNFB Reader to scan the setup
instructions, free-hand, and was able to figure out
Hi, what is the scan jig?
From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf Of
Sieghard Weitzel
Sent: Friday, December 26, 2014 12:41 PM
To: viphone@googlegroups.com
Subject: RE: The ScanJig
There is also a toll free number right at the bottom of the main website
There is also a toll free number right at the bottom of the main website for
placing orders by phone.
From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf Of
Richard Turner
Sent: Friday, December 26, 2014 8:54 AM
To: viphone@googlegroups.com
Subject: Re: The ScanJig
Eileen Misrahi
Sent: Friday, December 26, 2014 9:18 AM
To: viphone@googlegroups.com
Subject: Re: The ScanJig
Hi Richard,
Since the Scan Jig uses the light source from the iPhone or iPad, do you still
get accurate scans when using the Scan Jig? That's one of the advantage of the
StandSca
ec 26, 2014, at 8:43 AM, Richard Petty
>> wrote:
>>
>> An update. I received the following message from the ScanJig people:
>>
>> “Richard Turner forwarded a question that you had posted about the
>> calculation of shipping costs for the ScanJig. I looked at t
t; Even if you use down arrow and move to united states, it switches when
>>> pressing enter or just up arrowing to close the list.
>>>
>>> <>
>>> From: viphone@googlegroups.com <mailto:viphone@googlegroups.com>
>>> [mailto:viphone@googl
gt;> From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
>> Of Matthew Bullis
>> Sent: Thursday, December 25, 2014 12:48 PM
>> To: viphone@googlegroups.com
>> Subject: Re: The ScanJig
>>
>> Try using alt down arrow to open the combo box s
>
> An update. I received the following message from the ScanJig people:
>
> “Richard Turner forwarded a question that you had posted about the
> calculation of shipping costs for the ScanJig. I looked at the order you
> entered. The shipping cost should be $6.00 to your location in
half
> Of Matthew Bullis
> Sent: Thursday, December 25, 2014 12:48 PM
> To: viphone@googlegroups.com <mailto:viphone@googlegroups.com>
> Subject: Re: The ScanJig
>
> Try using alt down arrow to open the combo box so it won't activate when you
> scroll it.
>
An update. I received the following message from the ScanJig people:
“Richard Turner forwarded a question that you had posted about the calculation
of shipping costs for the ScanJig. I looked at the order you entered. The
shipping cost should be $6.00 to your location in Texas. It appears
iphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf Of
Paul Henrichsen
Sent: Thursday, December 25, 2014 10:22 PM
To: viphone@googlegroups.com
Subject: RE: The ScanJig
Even if you use down arrow and move to united states, it switches when pressing
enter or just up arrowing to clo
Subject: Re: The ScanJig
Try using alt down arrow to open the combo box so it won't activate when you
scroll it.
Matthew
--
The following information is important for all members of the viphone list. All
new members to the this list are moderated by default. If you have any
questions or con
Subject: RE: The ScanJig
Ok, ordered and going to give it a try. Was very easy to order on the site all
fields read great.
From: viphone@googlegroups.com<mailto:viphone@googlegroups.com>
[mailto:viphone@googlegroups.com] On Behalf Of Richard Turner
Sent: Wednesday, December 24, 2014 1:01
Ok, ordered and going to give it a try. Was very easy to order on the site
all fields read great.
From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
Of Richard Turner
Sent: Wednesday, December 24, 2014 1:01 PM
To: ViPone list
Subject: The ScanJig
OK, I now have
Try using alt down arrow to open the combo box so it won't activate when you
scroll it.
Matthew
--
The following information is important for all members of the viphone list. All
new members to the this list are moderated by default. If you have any
questions or concerns about the running of t
#x27;t repeat it since it's right here in
> this thread.
>
>
>
> From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
> Of Jenifer Barr
> Sent: Thursday, December 25, 2014 9:18 AM
> To: viphone@googlegroups.com
> Subject: Re: The ScanJig
>
&
, December 25, 2014 9:18 AM
To: viphone@googlegroups.com
Subject: Re: The ScanJig
Hi.
What is this product? And, how does it differ from the stand scan pro? Thanks
for any information anyone can give. And, Merry Christmas!
Jenifer Barr
Sent from my iPhone
On Dec 25, 2014, at 11:53 AM, Jim
t product for the
> right priceJ.
>
>
> From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf Of
> Richard Turner
> Sent: Thursday, December 25, 2014 9:45 AM
> To: viphone@googlegroups.com
> Subject: Re: The ScanJig
>
> I'm waiting fo
Thank you, just wanted to be sure I was getting the right product for the right
priceJ.
From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf Of
Richard Turner
Sent: Thursday, December 25, 2014 9:45 AM
To: viphone@googlegroups.com
Subject: Re: The ScanJig
I
free StandScans. The
original model, and then the one out of the more improved material.
Also, the Giraffe Reader was sold to me at half price.
So, now that I have evaluated all three stands, if one can deal with the larger
size of the ScanJig when transporting it, I still say it is hands-down the
: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
Of Richard Turner
Sent: Wednesday, December 24, 2014 1:01 PM
To: ViPone list
Subject: The ScanJig
OK, I now have seen what I consider the Cadillac of stands.
I got the ScanJig at work Monday. I used KNFB Reader to scan the
Do you have to break it down and set it up again each time you want to use
it?
Andy
-Original Message-
From: Richard Turner
Sent: Wednesday, December 24, 2014 11:01 AM
To: ViPone list
Subject: The ScanJig
OK, I now have seen what I consider the Cadillac of stands.
I got the
OK, I now have seen what I consider the Cadillac of stands.
I got the ScanJig at work Monday. I used KNFB Reader to scan the setup
instructions, free-hand, and was able to figure out the pieces and put it
together.
I enjoy puzzles, so it was fun putting it together. It didn't take more
38 matches
Mail list logo