[weewx-user] Re: GUI date/time and current conditions frozen

Just looked at your sire and you are now showing 0300 23 May so it has jumped again. If you look at the wind direction and wind vector plots you can clearly see individual points at around 0100 and 0300. It is hard to see but I believe all of the other plots have individual points at the same

Re: [weewx-user] Re: AcuRite 5-in-1 sensor and barometric pressure

Hi Rich, Unfortunately, I didn't buy a console, just the outside 5-in-1 sensor. Looks like I'll be getting the BME280 and figuring that out. Thanks for the tip! On Thu, May 21, 2020 at 8:01 PM rich T wrote: > If you can plug in your console, will get the pressure. If not, you can > get a

Re: [weewx-user] New Database weewx 4.0

I'm very new...been running my weewx 3.9.2 (rpi4) install for about a month, using the standard wview.schema. I've been working on adding some sensors and wanting to extend the schema, then I saw the wview_extended schema rolling out with 4.0. It's got everything I wanted to add in the near

Re: [weewx-user] python3-ow for OWFS

Thanks for the info, I also want to add a BME280 sensor and have had a look at the bme280wx driver by WJCarpenter and it seems to be python2 only at this stage. So for the time being I will go back to using python 2. How do I get the systemd service for run weewx in python2 mode ?? -- You

Re: [weewx-user] Re: Original Dallas Semiconductor 8 reed switch wind vane with DS2407 and DS2401 1-wire chips

On the off chance that there are any more original 1-wire Dallas weather stations that are ready to be dusted off and redeployed, then there is a modified driver available at... https://github.com/glennmckechnie/weewx-owfs It's based on mwalls original owfs.py driver but for the time being it

[weewx-user] Re: AcuRite 5-in-1 sensor and barometric pressure

If you can plug in your console, will get the pressure. If not, you can get a BME280 sensor for your pressure, inside temp and humidity. On Thursday, May 21, 2020 at 7:49:14 PM UTC-4, Bryan Parke wrote: > > Hi all. Weewx is great! I'm very impressed with all that it can do. Here > is a bit

Re: [weewx-user] Re: Weewx-interceptor stopped working

i had a similar problem linked below, see if it helps you https://groups.google.com/d/msg/weewx-user/OocmnyeIhbM/I-yHmyabCAAJ > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it,

Re: [weewx-user] AcuRite 5-in-1 sensor and barometric pressure

Thanks for the info. Yeah, I chose to get the 5-in-1 sensor all by itself, but that was because I didn't do my research first! I just assumed the barometer was in the sensor, not the display. I'll take a look at the project you linked. Thanks! On Thursday, May 21, 2020 at 5:06:38 PM

Re: [weewx-user] AcuRite 5-in-1 sensor and barometric pressure

I have a 5in1 with the display and I'm pretty sure the barometric pressure is in the display. I get it via the USB connection. When I bought mine, it was one single package - I didn't have the option of not buying the display. You could always build yourself a barometric pressure device that

[weewx-user] Re: Monitoring WeeWX with Nagios

On Thursday, May 21, 2020 at 1:58:31 PM UTC-7, Xant wrote: > but get error of DBI not installed (perl DBI::Sqlite3 module), and I can > not figured-out. > > > The perl code requires a CPAN module so it can talk to the sqlite3 db Look at the bottom of the comment block at the top of check_wview

[weewx-user] Re: Monitoring WeeWX with Nagios

Turned-out the above is Matthew Wall page... maybe Matt can clarify. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To

[weewx-user] Re: Monitoring WeeWX with Nagios

Also in the search of Nagios plugin for WeeWX monitoring. Found the following: http://lancet.mit.edu/mwall/projects/weather/ http://lancet.mit.edu/mwall/projects/nagios/check_wview but get error of DBI not installed (perl DBI::Sqlite3 module), and I can not figured-out. Posting in case

[weewx-user] Re: GUI date/time and current conditions frozen

Update, without any intervention time jumped to 6PM. 10hrs ahead. On Friday, May 22, 2020 at 7:22:48 AM UTC+12, Zsolt Máté wrote: > > Sorry, my bad. New Zealand is UTC+12. > > My issue didn't disappear. Now is showing the time is showing 2PM and not > updating, but local time is 07:15AM. > Data

[weewx-user] Re: GUI date/time and current conditions frozen

Sorry, my bad. New Zealand is UTC+12. My issue didn't disappear. Now is showing the time is showing 2PM and not updating, but local time is 07:15AM. Data in the plots is scattered. I've double checked the date/time on my PWS and is correct. On Thursday, May 21, 2020 at 10:41:21 PM UTC+12,

Re: [weewx-user] confusion with manager and schema

You did some impressive digging, there! There are now two different ways of specifying a schema. The old, V3.9 way, and a new V4.0 way. The new way is more flexible, although the old way is still supported. The problem is that you're mixing methods. The old way used the superclass manager

[weewx-user] confusion with manager and schema

Hello, i have installed the new stable version 4.0 in parallel (as described in the WIKI beta test) to test if my hardware and my own extensions work with python3. I started with a new database and a new weewx.conf. My old installation is weewx 3.9.1 (here the database and the weewx.conf was

[weewx-user] Re: No rain data for Acurite 5n1 - not getting parsed

Gary, thank you for your post. It has been helpful. I have made some progress now. First I think I might be confused about how to set up my config file as to whether I am using the SDR option or the Acurite Option when configuring my station. I have come to the conclusion that choosing SDR

Re: [weewx-user] Re: Setting log level for syslog.syslog() style logging for older addons and modules

That's fine. I can fix what's needed for me where upstream has ceased working on it. Until then I can suggest adding syslog filters on their system. I'm not sure there are still repos where I can commit, tho. However, with all due respect, you don't maintain WeeWx for devs but for the general

Re: [weewx-user] python3-ow for OWFS

That's odd it was there, but it really does seem to have gone missing from the repos, and there's no record of it (or one I can find). I've had a look in the local cache but it's not in there either. Looks like it's time to switch to using owfs.py with ow-server and pyownet. That combination

Re: [weewx-user] python3-ow for OWFS

Best I can tell, python3-ow was not included in buster, or any other stable release. There is an unstable release , but it seems to support the Power-PC architecture only. PyPi offers 1-wire wrapper for Python 2 and 3 called onewire

Re: [weewx-user] Re: Setting log level for syslog.syslog() style logging for older addons and modules

For the record, Gary is one of the core developers. For a variety of reasons, one of the goals of V4 was to not depend on syslog. Yes, you've found a regression, but not a very major one. It can't be fixed without breaking that goal. We have tried hard to get 3rd parties to "catch up", to the

[weewx-user] python3-ow for OWFS

I am trying to get the OWFS service installed on a new Weewx 4 install on a Raspberry Pi with Buster. When I try to install the required python3-ow package I get an error that it "Unable to locate package python3-ow" Do I have to add some other repository to get this package ??

[weewx-user] Re: No rain data for Acurite 5n1 - not getting parsed

rtl_433 version 20.02-26-ge571a05 from Feb 2020 has broken every sensor I have in lots of ways, numerous identifiers have changed names so nothing works out of the box at the moment. The edit above fixed the rain reading on my mates new Acurite station but the battery status is still not

[weewx-user] Re: GUI date/time and current conditions frozen

Hi, You said on your top message that your timezone is UTC - 12 But below I see UTC + 12 Could it be the problem ? Le jeudi 21 mai 2020 10:08:43 UTC+2, Zsolt Máté a écrit : > > Your time zone: Friday, 22 May 2020 6:00:00 AM GMT+12:00 > > -- You received this message because you are

[weewx-user] Re: Setting log level for syslog.syslog() style logging for older addons and modules

Certainly, if I ever get to thoroughly know the insights of the logging mechanisms inside core WeeWx code, I will happily contribute a fix. However, until then, please don't sound like that's the only way to fix regressions. That aside, what I'd like to hear is some opinion or statement from

[weewx-user] Re: GUI date/time and current conditions frozen

Tried, twice. On Thursday, May 21, 2020 at 8:54:18 PM UTC+12, gjr80 wrote: > > Just force all your plots to be regenerated by deleting them from your > WeeWX machine. > > Gary > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe

[weewx-user] Re: Setting log level for syslog.syslog() style logging for older addons and modules

Yes, you maybe right. As Tom says, PRs are always welcome. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view

[weewx-user] Re: GUI date/time and current conditions frozen

Just force all your plots to be regenerated by deleting them from your WeeWX machine. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] Re: GUI date/time and current conditions frozen

Thank you, it worked. Interestingly that rogue spike is still showing up at the wind vector plot. On Thursday, May 21, 2020 at 8:42:17 PM UTC+12, gjr80 wrote: > > No, —check just checks a couple of unrelated things, will not help you at > all. You need to use —drop-daily before —rebuild-daily.

[weewx-user] Re: Setting log level for syslog.syslog() style logging for older addons and modules

Thanks for your comment. No, it's not "harsh", logging IS all over the place, since it's in the designated weewx.log, syslog and also in the systemd journal under several different tags. I'm also aware of secondary instances' tagging scheme in the log. It's just that it's another source of

[weewx-user] Re: GUI date/time and current conditions frozen

No, —check just checks a couple of unrelated things, will not help you at all. You need to use —drop-daily before —rebuild-daily. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from

[weewx-user] Re: GUI date/time and current conditions frozen

wee_database --check runs OK (I assume), but --rebuild-daily return an error root@weewx:~# wee_database --check Using configuration file /etc/weewx/weewx.conf Using database binding 'wx_binding', which is bound to database 'archive_mysql' Checking daily summary tables version... Daily summary

[weewx-user] Re: Interceptor receives empty packets - Netcat don't....

How was this problem solved? I have exactly the same problem, although in my case it doesn't help changing to "Ecowitt". Den fredag 25 oktober 2019 kl. 14:06:27 UTC+2 skrev Ingper: > > Update: > If I change the output format from Weather station to "Ecowitt" > Interceptor will find the info,

[weewx-user] Re: GUI date/time and current conditions frozen

Did you use wee_database to rebuild the daily summaries? Probably safest to drop them first then rebuild. Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

Thanks very much Gary Nev On Thursday, May 21, 2020 at 5:45:16 PM UTC+10, gjr80 wrote: > > You did a setup.py install so just install 3.9.1 over the top. The user > directory won't be touched and of course backup your data. Might be > worthwhile looking at the log rather than the

[weewx-user] Re: GUI date/time and current conditions frozen

It looks like I messed up something. I've deleted the two rows from the "future", but now weewx wont start. root@weewx:~# service weewx restart root@weewx:~# tail -f /var/log/syslog May 21 20:30:32 weewx weewx[8599] CRITICAL __main__: File "/usr/share/weewx/weewx/engine.py", line

[weewx-user] Re: Ecowitt GW1000 and Passkey error

Hi Gary Thanks for looking. It works with multiple instances listening to different ports, so the solution, buy more GW1000 devices. I'm also using mqtt and the solution here was to have 1 instance publishing and the other instances just subscribing to the topic. Using Belchertown. Maybe in

[weewx-user] Re: GUI date/time and current conditions frozen

Brain fade on my part, I should have tweaked earlier. I would go in and delete the future records from the archive then rebuild the daily summaries. You could just let it be and it will (seemingly) fix itself come 6am tomorrow (albeit with a couple of duplicate index errors in the log) but

[weewx-user] Re: GUI date/time and current conditions frozen

Nice catch. I'm using mysql as database. Via phpmyadmin I've managed to sort the database to date, max is 1590084000, converted: GMT: Thursday, 21 May 2020 6:00:00 PM Your time zone: Friday, 22 May 2020 6:00:00 AM GMT+12:00 Relative: In 10 hours On Thursday, May 21, 2020 at 7:32:26 PM UTC+12,

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

You did a setup.py install so just install 3.9.1 over the top. The user directory won't be touched and of course backup your data. Might be worthwhile looking at the log rather than the abbreviated systemctl view, the last part of the systemctl output tells me nothing, there almost certainly

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

Well done those edits that problem with my driver cleared others have happened. I then tried to run on simulator and I get *●* weewx.service - LSB: weewx weather system Loaded: loaded (/etc/init.d/weewx) Active: *active (exited)* since Thu 2020-05-21 16:20:37 AEST; 1h 9min ago

[weewx-user] Re: GUI date/time and current conditions frozen

Aha, look at your wind direction and wind vector plots, you have a wind direction dot at midnight and likewise a vector. Are you using SQLite? If so try the following (you may have to install the sqlite3 package first if sqlite3 is not found - just use sudo apt-get install sqlite3): $ sqlite

Re: [weewx-user] Uṕgrade from 2.7.0 to 4.0.0 fail

Follow instructions at https://github.com/weewx/weewx/wiki/cmon -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view

Re: [weewx-user] Uṕgrade from 2.7.0 to 4.0.0 fail

Good Morning Its a Number to hard for me, sorry I have no idea what iam doing to fix this Problem. I have renamed all Database in Database_Name. I think my English is not enough for this. I dont have the Programming Skills. I have a backup from my SD Card with 2.7.0 . I go back to this. Is

[weewx-user] Re: GUI date/time and current conditions frozen

I've ruled out browser cache. Tested on multiple devices within my network and even asked friends abroad to test. You can give it a try, as well. https://weather.zmate.nz 1. 22nd of May, 12:00:00 is not changing. 2. I've deleted the contents of the www and it has been automatically

[weewx-user] Re: Ecowitt GW1000 and Passkey error

Well that answers that question :) Was reading through the interceptor driver and was starting to come to that conclusion. Gary On Thursday, 21 May 2020 16:19:27 UTC+10, Gert Andersen wrote: > > Hi > > Unfortunately, it seems not possible to have 2 weewx instances using the > same port: > >

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

Like I said I can't explain why this error would not come up with the same driver under 3.9.1,I just checked the 3.9.1 documentation/code and hardware_name was mandatory. In any case easy fixed, you just need something like this in your driver class: @property def hardware_name(self):

[weewx-user] Re: Ecowitt GW1000 and Passkey error

Hi Unfortunately, it seems not possible to have 2 weewx instances using the same port: May 21 08:13:52 GAND weewx-billeder[17360] INFO user.interceptor: driver version is 0.53 May 21 08:13:52 GAND weewx-billeder[17360] INFO user.interceptor: device type: ecowitt-client May 21 08:13:52 GAND

[weewx-user] Re: GUI date/time and current conditions frozen

Thanks, that is bizarre, I expectedt to see something in the log about record timestamps being less than the last, but no everything is normal. Archive records are bing generated with the correct timestamps, reports are being generated without issue. I can't see it being a browser cache issue,

[weewx-user] Re: upgrade from 3.9.1 to 4 failed

This is my driver file, had no problems before.. but always a first time :) # #$Revision: 1 $ #$Author: Nickolas McColl $ #$Date: 2014-08-16 $ #Initial information from above author further edits by Nev Davis #Latest edit 20 June 2017 by Nev Davis """Raspberry Pi driver for