Same here, pip upgrade from 5.0.0rc3 , my weewx.conf still showing
5.0.0b15, which I ran before 5.0.0rc3 .
sab...@gmail.com schrieb am Montag, 15. Januar 2024 um 02:37:28 UTC+1:
> Congrats on the release. Since I just finished installing 5.0RC3. I did
> the upgrade to 5.0 this morning
Great news and congratulations for the release!
matthew wall schrieb am Montag, 15. Januar 2024 um 04:38:51 UTC+1:
> On Sunday, January 14, 2024 at 7:52:00 PM UTC-5 vince wrote:
>
> Dale - agree with your email. No epel-release available on f39 it seems.
>
>
> i updated the redhat
Hört sich nach einem Geniestreich an. Da sich mein Standort in Österreich
noch in dem Ausschnitt der Karte befindet, melde ich mein Interesse an.
Würde das auch gerne als Option für den Bootstrap Skin übernehmen.
Karen K schrieb am Freitag, 12. Januar 2024 um 19:30:17 UTC+1:
> As this covers
Write an extension that queries the device every archive_interval
or
Get the device to publish it's value per MQTT (if it supports anything such
this) and use mqttsubscribe
or
find a third party that queries the device and publishes the value per MQTT
(node red should work) and use
ly report in the logs, and I just don't see anything at all.
> Isnt' there a message about "loss of a sensor" or something?
>
> On Thursday, January 11, 2024 at 7:25:50 AM UTC+1 michael.k...@gmx.at
> wrote:
>
>> If it is not the battery, check the signal strength. With the
If it is not the battery, check the signal strength. With the Interceptor
Driver I don't know how to get the readings for the signal strength. But
you could try to find out and then see if there are drops in any way.
Sometimes it doesn't need much to have an inferior signal strength. I, for
Thanks! Patched the file, it's working again.
Tom Keffer schrieb am Mittwoch, 10. Januar 2024 um 15:23:11 UTC+1:
> Michael,
>
> I've reverted the StdCalibrate behavior back to the way it was in V4.10.
> To appear in the next V5 release.
>
> On Tue, Jan 9, 2024 at 8:43 PM 'm
e think if there's a better solution.
>
> -tk
>
> On Tue, Jan 9, 2024 at 3:13 AM 'michael.k...@gmx.at' via weewx-user <
> weewx...@googlegroups.com> wrote:
>
>> I did a pip upgrade from b13 (no new install, no new venv). I run 3
>> drivers: ws28xx
in
2024-01-09 11:18:13 weewxd-ws28xx[195569] CRITICAL __main__:
NameError: name 'extraHumid1' is not defined
2024-01-09 11:18:13 weewxd-ws28xx[195569] CRITICAL __main__:
Exiting.
michael.k...@gmx.at schrieb am Dienstag, 9. Januar 2024 um 11:47:15 UTC+1:
> I did a pi
I did a pip upgrade. I run 3 drivers: ws28xx, interceptor and ecowitt
gateway driver from the same installations, using 3 different weewx.conf
files and three databases
After upgrading, two installations are crashing, when having certain
corrections configured. Interestingly, one station
Yes and no, there are so many possibilities. For the narrow context, given
you want to access the pages weewx created, on the machine, weewx is
running: you need a webserver on that machine. Once this is set up, you
need to have the pages accessible to the webserver. This can easily be done
That's correct and a possibility. Nevertheless, there are many reasons not
to go the CDN way. GDPR is just one of them.
Chuck Rhode schrieb am Samstag, 6. Januar 2024 um 19:33:34 UTC+1:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Sat, 6 Jan 2024 04:57:04 -0800 (PST)
&
:
> Thanks for pointing that out. I'm not sure where "cn" came from. We'll
> change it to 'zh".
>
> Issue #912 <https://github.com/weewx/weewx/issues/912>.
>
> On Sat, Jan 6, 2024 at 1:59 AM 'michael.k...@gmx.at' via weewx-user <
> weewx...@googlegroups.co
Another thing is that NotoSansSC is a bit large when it comes to e.g.
shipping it bundled with a skin. 10MB for a single kind of font weight.
michael.k...@gmx.at schrieb am Samstag, 6. Januar 2024 um 12:02:41 UTC+1:
> Rather than changing skin.conf you are probably better off add
Rather than changing skin.conf you are probably better off adding the
config in the matching section of weewx.conf, or your changes will be
overwritten on next update.
See https://weewx.com/docs/4.10/customizing.htm#customizing_reports
Kranz Liang schrieb am Samstag, 6. Januar 2024 um 11:29:04
This reveals also a limitation of WeeWX current localization support:
according to Wikipedia's interpretation of ISO-639-1
(https://en.wikipedia.org/wiki/List_of_ISO_639_language_codes) "Chinese" is
"zh" and there is no way to distinguish between Traditional and Simplified
Chinese. WeeWX
https://groups.google.com/g/weewx-user/search?q=pil%20attribute%20error
Michael Waldor schrieb am Donnerstag, 4. Januar 2024 um 17:42:34 UTC+1:
> I'm trying to setup my linux laptop as a degugging station for my weewx
> issue. I've copied all relevant files into my homedirectory resembling the
Maybe not really helpful, but anyway:
- isn't the parameter --ip-address (you use "ip-addresse")
- Is there a reason why you use an outdated version of weewx for a clean
install?
Robert de Keijzer schrieb am Dienstag, 2. Januar 2024 um 07:43:13 UTC+1:
> Hi, I have a clean install
I don't know if I got you, but maybe this templates contains what you need
or is at least helpful:
https://github.com/brewster76/fuzzy-archer/blob/0cba62f9e59a883699986478a694f19144bee61e/skins/Bootstrap/stats.html.tmpl#L66C92-L66C96
Karen K schrieb am Sonntag, 31. Dezember 2023 um 15:51:29
More log (a complete log from startup, with debug=1 set) would be useful.
Is the user running weewx permitted to access the device?
Dmitry Senashenko schrieb am Dienstag, 26. Dezember 2023 um 21:32:09 UTC+1:
> Hi, I am new here. I have old Acurite 02032C and I decided to connect it
> to my
[image: signal-2023-12-23-073912.jpeg]
michael.k...@gmx.at schrieb am Samstag, 23. Dezember 2023 um 07:38:31 UTC+1:
> Near Salzburg, Austria https://maps.app.goo.gl/LnN8ZpQahvgjeJPw6
> https://kainzbauer.net/weather/Rif/index.html
>
>
>
> weather list schrieb am Samstag, 23. D
Near Salzburg, Austria https://maps.app.goo.gl/LnN8ZpQahvgjeJPw6
https://kainzbauer.net/weather/Rif/index.html
weather list schrieb am Samstag, 23. Dezember 2023 um 07:29:01 UTC+1:
> Where is this event happening?
>
> On 23 Dec, 2023, at 00:56, 'michael.k...@gmx.at' via weewx-user
:16:03 UTC+1:
> Oh. Horrible readings. We had half of that only, and it felt dangerous.
>
> michael.k...@gmx.at schrieb am Samstag, 23. Dezember 2023 um 06:56:14
> UTC+1:
>
>> The neighbors roof is half gone, parts of my pv went flying, one rain
>> gauge is in a yet un
The neighbors roof is half gone, parts of my pv went flying, one rain gauge
is in a yet undefined state, my wind mast is banked at 30°, probably the
base broke. It is still dark yet. I hope daylight won't reveal more damage.
[image: 2023-12-23.png]
--
You received this message because you are
Regarding "phone home" I plan to experiment with such devices next year
https://www.rtl-sdr.com/rtl_433-ported-to-esp32-microcontrollers-with-cc1101-or-sx127x-transceiver-chips/
My goal is to capture all the broadcasted values from my devices, cache
them locally, publish them in realtime using
gn, while the Davis anemometer can be separated and put up
> high while the other sensors are somewhere else.
>
> On Tuesday, December 19, 2023 at 7:05:49 AM UTC-9 michael.k...@gmx.at
> wrote:
>
>> Davis and $300, doesn't sound this fits together.
>>
>> In my opinion, c
Davis and $300, doesn't sound this fits together.
In my opinion, currently the Ecowitt universe provides the most flexible,
most adaptable and most extendable hardware on the market. You can start
tiny and go big, they even provide a whole range of different sensors,
allowing you to adapt you
found it: /var/log/journal/weewx.log
michael.k...@gmx.at schrieb am Samstag, 16. Dezember 2023 um 19:48:04 UTC+1:
> cat /etc/debian_version
> 11.7
>
> journalctl isn't installed
>
> Oops, I deleted the original message this was it:
>
> When I have an erroneous weewx.co
cat /etc/debian_version
11.7
journalctl isn't installed
Oops, I deleted the original message this was it:
When I have an erroneous weewx.conf and start weewx using
systemctl start weewx
there is nothing in my log file, nor in /var/log/syslog . I am on Debian
using rsyslog and have the logging
When I have an erroneous weewx.conf and start weewx using
systemctl start weewx
there is nothing in my log file, nor in /var/log/syslog . I am on Debian
using rsyslog and have the logging configured like so in weewx.conf:
[Logging]
version = 1
disable_existing_loggers = False
#
The are 6 days in 2023 that are recognizable. Look at the daily/Weekly
plots and how they look like. It should be possible to regenerate them, if
you don't have any snapshots. For me, this looks like a classic
upcast/valley wind graph.
Tom Keffer schrieb am Dienstag, 12. Dezember 2023 um
It seems to me that NeoWX is neither internationalized, nor maintained any
more. But it is still there, clone it an have fun ;)
Mazufa schrieb am Dienstag, 12. Dezember 2023 um 04:31:07 UTC+1:
> Hello!
>
> Has anyone made an embedded rain radar and webcam for this neowx theme?
> Since there is
emi-automated solution; however, a fully automated
> approach for weewx jumping in at restart when a gap is detected would be
> definitely much better
> On 07.12.2023 14:22, 'michael.k...@gmx.at' via weewx-user wrote:
>
> I asked more or less the same question as Keith and I am quit
Hi there,
I've just release the newest, and so far best version "v4.2" for the
Bootstrap skin.
New in v4.2:
- Upgraded dependencies
- Overhaul of the UI, optimizations for mobile devices, more compact on
mobile devices
- Navbar is fixed on top, faster and easier navigation
I asked more or less the same question as Keith and I am quite happy with
Rainer's recommendation (which I followed). The only thing left to make me
more than happy, is to find an automatic way to backfill missing sensor
data for the rare occasions, weewx isn't running for whatever reason. The
Thank you!
Tom Keffer schrieb am Samstag, 2. Dezember 2023 um 23:08:20 UTC+1:
> Something like
>
> $span(day_delta=365).length.day.format("%d")
> $span(day_delta=1).length.day.format("%d")
>
> will generate
>
> 365 days
> 1 day
>
>
&g
I have a report that reports the rain sum for the last 365 days:
$span(day_delta=365).rain.sum
I want to label this value like so:
365 days: 997mm
Is there a way to format the number 365 with $units.labels.day?
Something like:
$format(365, $units.labels.day) => 365 days
$format(1,
There are many way to do this. The best way? Depends on your exact use case
and equipment.
In general, you have to find a way to transport the desired data from the
device weewx is running, to the display.
Basically, what you will have to do is to configure a report for the max
wind speed and
- Make sure you start weewx after syncing time with ntp, the Pi doesn't
have a hardware clock.
- Install ephem (this is not mandatory)
hind...@gmail.com schrieb am Montag, 27. November 2023 um 18:56:51 UTC+1:
> I am getting some strange errors with my weewx set up. My log is
An asterisk is no wildcard, but + and # are. so, weather/# would have
worked. An asterisk is not valid to be used in topics, so it shouldn't be
used at all, although it hasn't any other special meaning, as far as I know.
Don Vawter schrieb am Sonntag, 26. November 2023 um 16:15:46 UTC+1:
> The
*Precondition*: you didn't customize, or you have been following the
advised way to customize and edited only the skin's report configs in
weewx.conf, and have nothing else changed (like templates that come with
the skin, the skin's skin.conf, ...):
- Install the new version, you won't
chema you use they are to be found
in https://github.com/weewx/weewx/blob/master/bin/schemas/wview_extended.py
or https://github.com/weewx/weewx/blob/master/bin/schemas/wview_small.py
or https://github.com/weewx/weewx/blob/master/bin/schemas/wview.py or
whatever schema you use.
michael.k...@gmx.
I think you need something like this, to map the values to obs_types:
# The topics to subscribe to.
[[topics]]
unit_system = METRICWX
[[[rtl_433/pi4b8/devices/Acurite-5n1/A/3030/humidity]]]
name = outHumidity
I have some Ecowitt hardware: several sensors, a HP2550_C and a GW2000.
I use the GW2000 with weewx, it also transmits to ecowitt.net, the HP2550_C
is only used with ecowitt.net. The GW2000 missed some data from the wind
sensor, both, my weewx graphs an ecowitt.net are missing these readings at
og.LOG_DEBUG, "vlaga: found value of %s" %
> value)
> event.record['extraHumid1'] = float(value)
> except Exception, e:
> syslog.syslog(syslog.LOG_ERR, "vlaga: cannot read value: %s" %
> e)
>
>
> četrtek, 9. november 2023 ob 07:
und value of %s" %
> value)
> event.record['extraHumid1'] = float(value)
> except Exception, e:
> syslog.syslog(syslog.LOG_ERR, "vlaga: cannot read value: %s" %
> e)
>
>
> četrtek, 9. november 2023 ob 07:20:17 UTC+1 je o
Did run run weewxd directly, and check, how the loop packet drop in and
what in there?
Also: what kind of sensor did you apply to augment your data and how does
the data go into into you weewx? MQTT?
What I did:
With my ws23xx, I have a outHumidity Sensor that works well below 85%, but
barely
As I said: "something like" "not tested"
Then I'd give
outHumidity = extraHumid1 if 'extraHumid1' in locals() else None
a try. Still: not tested, an I am just assuming that setting it to None
when present it will be ignored when accumulating the value over an
archive_interval. It might
Just for the record, vince: I don't see images but only text.
vince schrieb am Mittwoch, 8. November 2023 um 21:24:55 UTC+1:
> A few comments and suggestions:
>
>- Please 'attach' logs and screen grabs as text files rather than
>including images. We can't grep for things in screen
As I said: "something like" "not tested"
Then I'd give
outHumidity = extraHumid1 if 'extraHumid1' in locals() else None
a try. Still: not tested, an I am just assuming that setting it to None
when present it will be ignored when accumulating the value over an
archive_interval.
gjr80
I hope weewx will use it later to calculate
>> dew point and heat index with this value.
>>
>> [StdCalibrate]
>> [[Corrections]]
>> outHumidity = extraHumid1 if extraHumid1 is not None else None
>>
>> torek, 7. november 2023 ob 12:36:26 UTC+1 je oseba michael.k
ll use it later to calculate
>> dew point and heat index with this value.
>>
>> [StdCalibrate]
>> [[Corrections]]
>> outHumidity = extraHumid1 if extraHumid1 is not None else None
>>
>> torek, 7. november 2023 ob 12:36:26 UTC+1 je oseba michael.k...@gmx.at
>
> I am a happy Weex user
#metoo ;)
Nate Bargmann schrieb am Mittwoch, 8. November 2023 um 00:29:27 UTC+1:
> Very nicely done!
>
> - Nate
>
> --
> "The optimist proclaims that we live in the best of all
> possible worlds. The pessimist fears this is true."
> Web: https://www.n0nb.us
> Projects:
ervice to augment an existing driver.
>
> Gary
>
> On Tuesday, 7 November 2023 at 06:03:39 UTC+10 michael.k...@gmx.at wrote:
>
>> With the ecowitt gateway you need a second weewxd running, as a downside.
>> But you can build a whole new station, step by step, around that gateway
Thanks, I forgot about that!
gjr80 schrieb am Montag, 6. November 2023 um 21:08:54 UTC+1:
> Not necessary, if the Ecowitt gateway driver can be used it can be run as
> a data service to augment an existing driver.
>
> Gary
>
> On Tuesday, 7 November 2023 at 06:03:39 UTC+10 m
itt gateway and their outside T+H sensor, which
> integrates well into weewx.
>
> On Monday, November 6, 2023 at 11:19:23 AM UTC-8 michael.k...@gmx.at
> wrote:
>
>> Do not use a BME280 as an outdoor Sensor, it is not suited for this
>> purpose. The operating range i
Do not use a BME280 as an outdoor Sensor, it is not suited for this
purpose. The operating range is only valid in non-condensing environments.
In condensing environments, especially below freezing point, these sensors
are proven unusable. Go for a SHT3x or SHT4x.
Mark Fraser schrieb am
Hi Greg,
I personally would try to get everything done with a solution that's as
close to off-the-shelf as possible. WeeWX certainly can help you getting
data from the off-the-shelf devices and relay them in any other form. What
are the real issues in such events? The amount of rain, or the
Hi,
the sensor is sold
here:
https://techome24.de/technoline-tx59n-it-thermo-hygro-sensor-fuer-wettercenter-ws-2816-it-tec2000491
the station
here:
https://www.wetterladen.de/technoline-ws-2816-profi-funk-wetterstation-mit-windmesser-regenmesser
I solved the issue with the (since ever
Two other thoughts:
1. Use a skin that supports charts with multiple y-Axis.
2. I don't know if this is manageable with weewx currently: make the chart
show a different background color, when the variable is true/false. Just
like the day/night background.
Remy Lavabre schrieb am Sonntag, 5.
y VP2 using a serial2usb converter works.
>
> On Monday, October 30, 2023 at 2:20:38 PM UTC-7 michael.k...@gmx.at wrote:
>
>> Can I run weewx as non-root user using the ws28xx driver?
>>
>> I am on raspianOS, is there a device I have to change access rights or is
>
Can I run weewx as non-root user using the ws28xx driver?
I am on raspianOS, is there a device I have to change access rights or is
there a group to add the user to, or some other rule to let unprivileged
users access the device?
--
You received this message because you are subscribed to the
up using a relative path like, filename = log/weewxd.log.
> rich
>
> On Sunday, 29 October 2023 at 13:31:18 UTC-4 michael.k...@gmx.at wrote:
>
>> Let's assume this is from my weewx.conf (it is not working this way):
>>
>> WEEWX_ROOT = /home/pi/weewx-data
&g
Let's assume this is from my weewx.conf (it is not working this way):
WEEWX_ROOT = /home/pi/weewx-data
[Logging]
...
[[handlers]]
...
[[[rotate]]]
filename = WEEWX_ROOT/log/weewxd.log
Can I access the above defined WEEWX_ROOT in a section below? If yes, how,
UTC+1:
> What do you mean by 'a server run by my provider'? I'm uploading to
> Wunderground and CWOP but I'm assuming that not what you're talking about.
>
> On Sunday, October 29, 2023 at 10:24:14 AM UTC-4 michael.k...@gmx.at
> wrote:
>
>> 1. I use the web UI but upload
1. I use the web UI but upload the data to a server run by my provider
2. I use a (non-shipped) skin. I use the Bootstrap skin which features real
time live date shown in gauges and charts. You find a list in the
wiki: https://github.com/weewx/weewx/wiki/#skins
3. The skin I use also renders
I just wanted you to know there is a new version of the Bootstrap skin
(a.k.a. fuzzy-archer).
https://github.com/brewster76/fuzzy-archer
New in v4.1:
- Mixed charts: you can now mix "line" series with "bar" series. A mixed
radiation/UV chart is already in the configs, you can enable it
@paul bennet: I don't know if it is so much of a coincidence, Föhn is a
phenomenon that is common in spring and fall, rarely seen in winter and
summer. Is Chinook also tied to seasons?
"Katabatic" winds are cold winds, like Bora and Mistral, Föhn is warm, so I
don't know if we are mixing up
ademark for hair dryers and the name was inspired by the Föhn. Both
produce warm, dry air.
michael.k...@gmx.at schrieb am Freitag, 20. Oktober 2023 um 17:38:53 UTC+2:
> Austria, yes, just a few kilometers south of Salzburg. Föhn impairs a lot
> of people in their comfort, many have heada
Austria, yes, just a few kilometers south of Salzburg. Föhn impairs a lot
of people in their comfort, many have headache, cannot concentrate and
don't sleep well. Gotta watch my neck tonight, thank goodness we don't have
Föhn in combination with a full moon.
matthew wall schrieb am Freitag,
https://en.wikipedia.org/wiki/Foehn_wind
michael.k...@gmx.at schrieb am Freitag, 20. Oktober 2023 um 15:04:58 UTC+2:
> Mid/end October 47°N, who would expect the outside temperature to rise
> almost 14°C in only two hours? Even with Föhn this is remarkable.
>
> https://kainzbauer
Mid/end October 47°N, who would expect the outside temperature to rise
almost 14°C in only two hours? Even with Föhn this is remarkable.
https://kainzbauer.net/weather/Rif/de/index.html
[image: Screenshot 2023-10-20 150046.png]
[image: Screenshot 2023-10-20 150218.png]
--
You received this
Can you provide any more details regarding your installation? How many
skins do you have installed? Are you sure, the files you have deleted and
rebuilt, are the ones, that are shown in Seasons?
Craig Young schrieb am Sonntag, 15. Oktober 2023 um 07:24:22 UTC+2:
> I have loaded several months
kup.sdb
>
> On Monday, October 9, 2023 at 11:00:19 PM UTC-5 michael.k...@gmx.at wrote:
>
>> What exactly did you type when you say:
>> > I have tried with sudo with the same results
>>
>> jeremeyi schrieb am Dienstag, 10. Oktober 2023 um 05:43:20 UTC+2:
>>
What exactly did you type when you say:
> I have tried with sudo with the same results
jeremeyi schrieb am Dienstag, 10. Oktober 2023 um 05:43:20 UTC+2:
> I am trying to get rid of a couple of rain rate errors in my database
> using the guide here
>
>
It's a units issue:
40°F = 4.4°C
50°F = 10°C
and so on.
Glenn O'Callaghan schrieb am Mittwoch, 4. Oktober 2023 um 15:23:23 UTC+2:
> Hi,
>
> I'm using WeeWx V4.4.1 and MySQL V8.0.20 with a Davis Vantage Pro 2 and
> have an RPi measuring my roof space Temp and Humidity and am planning to
> store
I don't know, if it's possible. If it is possible, I recommend the area
being equivalent to the strike count, using a constant factor, if
necessary. Something like radius = factor * sqrt(lightning_strike_count/PI)
Tim Tuck schrieb am Montag, 11. September 2023 um 05:49:09 UTC+2:
> Hi all,
>
am Freitag, 25. August 2023 um 01:53:48 UTC+2:
> "michael.k...@gmx.at" writes:
>
> > I am just now in the middle of this Storm with stroboscopic-like
> lightning
> > flashing.
> >
> > I recognized my HP2551 is obviously showing lightning strik
I am just now in the middle of this Storm with stroboscopic-like lightning
flashing.
I recognized my HP2551 is obviously showing lightning strikes in realtime.
Every one or the other second.
Then I checked back in the manual and now disagree with gjr80, when he
states:
gjr80 schrieb am
re-generated:
>
> weewx@vegan:~$ ls -al ./public_html/weektempdew.png
> -rw-r--r-- 1 root root 14695 Aug 23 14:15 ./public_html/weektempdew.png
> On Wednesday, August 23, 2023 at 2:08:34 PM UTC+2 michael.k...@gmx.at
> wrote:
>
>> Don't forget to run
>> https://we
Don't forget to
run https://weewx.com/docs/latest/utilities.htm#Action_--rebuild-daily for
the particular days.
Weekly images are not generated every archive interval. If the data is
there, weekly images should be there by now (14:00 MESZ) If not, check the
log for error and/or delete the
First, make sure your hardware work as expected. Maybe your have to
relocate your console or eliminate a source of interference.
For the remaining occasions this might help
you: https://groups.google.com/g/weewx-user/c/izHn7K6RdWI
Invisible Man schrieb am Mittwoch, 23. August 2023 um 08:49:39
7 PM UTC+2 Karen K wrote:
>
>>
>>
>> michael.k...@gmx.at schrieb am Montag, 21. August 2023 um 12:10:29 UTC+2:
>>
>> #if $val > $other
>>
>>
>> And you could change it to:
>>
>> #if $val is not None and $val>$other
>>
>
n approach solving the issue.
Thanks everyone.
Karen K schrieb am Dienstag, 22. August 2023 um 06:36:17 UTC+2:
> michael.k...@gmx.at schrieb am Dienstag, 22. August 2023 um 05:37:25
> UTC+2:
>
> I don't know Belchertown's mechanism so I cannot answer this question. The
> Bootstrap
:
> Belchertown supports close to realtime measurements if you enable its
> websockets feature. Why isn't that mechanism good enough ?
>
> On Monday, August 21, 2023 at 12:19:46 PM UTC-7 michael.k...@gmx.at wrote:
>
> Thanks for your input Karen, what I've been talking about is ver
K schrieb am Montag, 21. August 2023 um 19:04:47 UTC+2:
> One fix: "interval" ("interval_minute" to be exact) is the only indicator
> for ARCHIVE records within the MQTT data. Or you compare the timestamps in
> dateTime.
>
> Karen K schrieb am Montag, 21.
till there. To solve my issue, I need to keep all loop data with
timestamps after the top of the newest archive interval remaining in the
front end, after syncing it with the newest backend data.
vince schrieb am Sonntag, 20. August 2023 um 20:33:38 UTC+2:
> On Thu, Aug 17, 2023 at 12:58
The problem is in /home/weewx/skins/External/index.html.tmpl
There is a comparision (greater than) between two values, where one of them
(the left) is None.
something like:
#if $val > $other
Where $val is None and $other an integer. Where is the template from, who
made it?
When it happens
. August 2023 um 15:47:23 UTC+2:
> Your second approach would be more "WeeWX-like". It's likely to be a very
> simple "report." Use the "CopyGenerator" as an example to follow.
>
> On Thu, Aug 17, 2023 at 12:58 AM michael.k...@gmx.at
> wrote:
>
>>
I want to inform the front end a certain event occurs on the backend, to be
more exact: when a report is finished. Does something like this exist?
If not, my ideas:
My front end is running a MQTT client and can be configured to listen to
such events. My idea is to hook into a report and emit a
I have have something running with a Fronius inverter. I don't know which
option the SolarEdge provides on site and I don't know the API. But two
option to get the data into weewx come to my mind:
- creating an extension and polling the inverter
- find a way to let the inverter emit MQTT
There is no average direction, what you are looking for is the direction of
a vector, the resulting vector (speed, direction) of all measuerements of a
given timespan. I am not too familiar with all database tables and entries,
but I thinking of the parts I know, I doubt that you can retrieve
> Stefan
>
>
> On Thu, Aug 10, 2023 at 5:47 PM Stefan Gliessmann
> wrote:
>
>> Hmm - it looks different in my sdb ...
>>
>> [image: Screenshot 2023-08-10 at 17.43.28.png]
>>
>> I will double check if I added the correction lightning_distance =
>>
I have an ecowitt WH57 and exactly the same correction
term: lightning_distance = lightning_distance if lightning_strike_count > 0
else None
[image: 2023-08-09 18_35_16-The weather in AT, Salzburg, Hallein, Rif -
Brave.png]
And just a few mintues ago, there were lightnings detected:
The
Certainly an interesting spin-off discussion: developing a platform to
ensure our data will remain our data. A first approach could be designing a
console. Many stations out there, modular or not, use wireless sensors that
only transmit their readings unencrypted and simplex. It should be
I am not sure if I really understood what you are looking for, but if I got
it right, this is what you are looking for:
https://github.com/weewx/weewx/blob/master/skins/Seasons/skin.conf
But for what it's worth: you're probably better off not changing the skin's
skin.conf, but make the changes
Hi,
why isn't FTP'ing from the Pi to any simple webspace an option? For MQTT
features you'll probably get along with flespi.io
Or did I miss something?
Sideshow Raheem schrieb am Donnerstag, 27. Juli 2023 um 21:31:34 UTC+2:
> Hello all,
>
> I've been enjoying tinkering with my new weather
een performed automatically
> on startup of v 4.3.0 or later, all archive records subsequently
> added/modified etc by WeeWX or wee_database are automatically correctly
> weighted. Bottom line is users should not really need to use the
> --reweight option. Note the --reweight option d
t;archive_day_rainRate".
> 5. Write the changes to the file and copy it back to Raspberry PI.
> 6. Start the Weewx service.
>
> Is there any better way?
>
> On Tuesday, 25 July 2023 at 07:45:43 UTC+2 michael.k...@gmx.at wrote:
>
>> The values are in the "ar
No, currently filtering is not possible for messages with a JSON payload,
at least none that I am aware of (and I am the author of this part). You
can file an issue https://github.com/brewster76/fuzzy-archer/issues and I
can take this as into account as a new feature for a future version. It
101 - 200 of 393 matches
Mail list logo
