[weewx-user] Re: Weewx not running properly No update to Santa Clause page

Ok, I am guessing here as I am not familiar with the WMR200 or its driver. In essence, the driver is talking to the WMR200, obtaining a record, adjusting the timestamp of the record and finding it is earlier than the last record in the weewx archive (28 Aug 2016 23:25), discarding the record an

[weewx-user] Re: Airfield Weather Station - Raspberry Pi to weewx to Weather Underground - failing

All / Vince, Must be painful dealing with simple questions, a problem I have struggled with for months just got solved thanks to finally understanding the relationship between Sudo giving permission to PI user ID over not. As such (below) that is my weather station talking to my Raspberry PI ,

[weewx-user] Re: Weewx not running properly No update to Santa Clause page

Ahh I think something is happening now. here is a different set of data in the log file. weewx.log Oct 4 00:54:58 One weewx[26634]: wmr200: MainThread: I genStartup() Still receiving archive packets cnt:0 len:1 Oct 4 00:54:58 One weewx[26634]: wmr200: MainThread: I Using pc time adjusting ar

[weewx-user] Re: Weewx not running properly No update to Santa Clause page

I am getting better with this. I did a copy and paste of the log but the data in the file is the same as the first post so I deleted it. I will do another start and see if it makes any difference. On Monday, October 3, 2016 at 10:58:56 PM UTC-5, gjr80 wrote: > > As odd as it sounds don't worry a

Re: [weewx-user] Re: Weewx not running properly No update to Santa Clause page

thanks I am not used to this forum operation yet. I am having trouble following the posts and replys. I will figure it out soon I hope. On Monday, October 3, 2016 at 10:47:46 PM UTC-5, Liz wrote: > > On Mon, 3 Oct 2016 15:23:47 -0700 (PDT) > "'Don l' via weewx-user" > wrote: > > > I wrote anoth

[weewx-user] Re: Weewx not running properly No update to Santa Clause page

As odd as it sounds don't worry about what 'is on the page' now. Once we get weewx running with no errors that will fix itself. You sound like you did it right. What is the log saying now? An extract from when you started weewx just now would be good. Gary -- You received this message because

[weewx-user] Re: Weewx not running properly No update to Santa Clause page

I am having trouble following you but here goes. I did the stop command about 5 times to make sure that there were no instances running. I did the PS command and found one more instance and I killed that one also. I checked the display page and it was still the same. I did the start command ag

Re: [weewx-user] Re: Weewx not running properly No update to Santa Clause page

On Mon, 3 Oct 2016 15:23:47 -0700 (PDT) "'Don l' via weewx-user" wrote: > I wrote another post that dissappeared. The posts don't disappear. Google hides them from you (the sender). Liz -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsu

Re: [weewx-user] So close... (new DEB Install)

Yes you can add it manually. It is normally added automatically when you install (if you tell it you are using an AcuRite station) or later on if you reconfigure using wee_config. On Tuesday, 4 October 2016 12:43:36 UTC+10, Bob Breck wrote: > > No bad—you’re being helpful. Unfortunately, I don’t

Re: [weewx-user] So close... (new DEB Install)

No bad—you’re being helpful. Unfortunately, I don’t have an Accurate section in my file; only station-specific section I have is for [Simulator]. Can I just add it manually? > On Oct 3, 2016, at 9:20 PM, gjr80 wrote: > > My bad, you need to have an [AcuRite] section in weewx.conf with a drive

Re: [weewx-user] Re: Te923 driver is not starting anymore.

Den 04-10-2016 kl. 03:22 skrev mwall: I kind of wonder, what really was changed. In older releases of weewx (2.7, 3.0, 3.1 ) I never had any problems with connection to the station. the first significant changes happened in 3.2. reading from the logger was added in 3.4 Well, I'm

[weewx-user] Re: So close... (new DEB Install)

My bad, you need to have an [AcuRite] section in weewx.conf with a driver setting. Something like this: [AcuRite] # This section is for AcuRite weather stations. # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C' model = AcuRite 2064C # The driver to use:

[weewx-user] Re: So close... (new DEB Install)

OK, changed to just AcuRite (no model), and it seems to still be choking on that: pi@raspberrypi:~ $ sudo weewxd /etc/weewx/weewx.conf Traceback (most recent call last): File "/usr/bin/weewxd", line 64, in weewx.engine.main(options, args) File "/usr/share/weewx/weewx/engine.py", line 853

[weewx-user] Re: So close... (new DEB Install)

You want station_type = AcuRite not station_type = AcuRite 02064C Make the change, save weewx.conf then stop/start weewx. As I said the model = 2064C appears optional. You can add: [AcuRite] model = 2064C to weewx.conf if you want. Gary On Tuesday, 4 October 2016 11:41:04 UTC+10, Bob Br

[weewx-user] Re: So close... (new DEB Install)

My weewx.conf file does not have a model variable: # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = AcuRite 02064C and that's it. There isn't a separate section for driver

Re: [weewx-user] Re: Te923 driver is not starting anymore.

On Monday, October 3, 2016 at 8:41:06 PM UTC-4, Allan H wrote: > > Den 12-09-2016 kl. 16:03 skrev mwall: > > On Sunday, September 11, 2016 at 11:44:15 AM UTC-4, Allan H wrote: > > Den 11-09-2016 kl. 16:33 skrev Allan: > > > > > Well, without the resets, it doesn't seem to load here. >

[weewx-user] Re: So close... (new DEB Install)

Hi, So what do you have in weewx.conf? Looking at the User's Manual under The configuration file weewx.conf you should have (amongst other things) something like: [Station] station_type = AcuRite [AcuRite] model = 2064C Reading the acu

[weewx-user] Re: Weewx not running properly No update to Santa Clause page

A few things. Regarding wee_debug destination, have a read of the 'Redirecting wee_debug output' section under wee_debug section of the User's

[weewx-user] Re: So close... (new DEB Install)

OK, running in foreground gives: pi@raspberrypi:~ $ sudo weewxd /etc/weewx/weewx.conf Traceback (most recent call last): File "/usr/bin/weewxd", line 64, in weewx.engine.main(options, args) File "/usr/share/weewx/weewx/engine.py", line 853, in main engine = EngineClass(config_dict) F

Re: [weewx-user] Re: Te923 driver is not starting anymore.

Den 12-09-2016 kl. 16:03 skrev mwall: On Sunday, September 11, 2016 at 11:44:15 AM UTC-4, Allan H wrote: Den 11-09-2016 kl. 16:33 skrev Allan: > Well, without the resets, it doesn't seem to load here. Follow-up: I just tried to uncomment line 1562 to get the reset back, and t

[weewx-user] Re: Weewx not running properly No update to Santa Clause page

On Monday, October 3, 2016 at 7:24:52 PM UTC-5, Don l wrote: > > This is part of the /etc/weewx/weewx.conf file. > * > debug = 1 > > # Root directory of the weewx data file hierarchy for this station > WEEWX_ROOT = / > > # How long to wait before timing out a socke

[weewx-user] Re: Weewx not running properly No update to Santa Clause page

This is part of the /etc/weewx/weewx.conf file. * debug = 1 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = / # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used

[weewx-user] Re: Weewx not running properly No update to Santa Clause page

On Monday, October 3, 2016 at 3:43:30 PM UTC-7, vince wrote: > > On Monday, October 3, 2016 at 3:23:47 PM UTC-7, Don l wrote: >> >> I wrote another post that dissappeared. I did another edit to make the >> lat long 2 decimals long instead of 4 and also changed the feet to foot in >> the altitude.

[weewx-user] Re: Weewx not running properly No update to Santa Clause page

On Monday, October 3, 2016 at 3:23:47 PM UTC-7, Don l wrote: > > I wrote another post that dissappeared. I did another edit to make the lat > long 2 decimals long instead of 4 and also changed the feet to foot in the > altitude. I did a stop and a start command and waited about 10 minutes and >

Re: [weewx-user] Weewx not running properly No update to Santa Clause page

The symptoms so far and this Sep 27 15:06:39 One weewx[5415]: engine: Unable to open configuration file / weewx makes it sound like a classic case of multiple weewx.conf files. Might be time to show us exactly what you are typing on the command line to edit weewx.conf. In fact, a wee_debug

Re: [weewx-user] Re: Weewx not running properly No update to Santa Clause page

Hard to say without seeing the log. -tk On Mon, Oct 3, 2016 at 3:23 PM, 'Don l' via weewx-user < weewx-user@googlegroups.com> wrote: > I wrote another post that dissappeared. I did another edit to make the lat > long 2 decimals long instead of 4 and also changed the feet to foot in the > altitud

[weewx-user] Re: Weewx not running properly No update to Santa Clause page

I wrote another post that dissappeared. I did another edit to make the lat long 2 decimals long instead of 4 and also changed the feet to foot in the altitude. I did a stop and a start command and waited about 10 minutes and the page still says Santa workshop and the same default data. Am I doin

Re: [weewx-user] Weewx not running properly No update to Santa Clause page

Ps I just did another edit. I stopped weewx and did an edit on weewx.conf to change the lat long to 2 decimal places and change the units on altitude to foot not feet and did a restart. After 10 minutes I called up the page and it still is Santa workshop with the same data. How do I get it to r

Re: [weewx-user] Weewx not running properly No update to Santa Clause page

And what does the log say now? -tk On Mon, Oct 3, 2016 at 2:39 PM, 'Don l' via weewx-user < weewx-user@googlegroups.com> wrote: > Oh here is where it writes... I do have in my config file that the station > location is at "Waldron Arkansas" and my lat long is set to "34.9028 > -93.9945" Which sh

Re: [weewx-user] Weewx not running properly No update to Santa Clause page

Oh here is where it writes... I do have in my config file that the station location is at "Waldron Arkansas" and my lat long is set to "34.9028 -93.9945" Which should be very close to the actual sensors. It still showes that the original install time showed 8-28 2016 11:45PM . About this weathe

[weewx-user] Re: Airfield Weather Station - Raspberry Pi to weewx to Weather Underground - failing

Vince, Going to have a go at manually kicking it off with Sudo and see if that helps , seeing some life on the Weatherstation will give me the will to persevere :)... p.s. If you live anywhere in Southern England or Kent you have a instant free flight in the bag. Seeing the weather at the airfi

[weewx-user] Re: So close... (new DEB Install)

On Monday, October 3, 2016 at 12:09:15 PM UTC-7, Bob Breck wrote: > > Sorry--yes, Raspbian (v. 8 Jessie), and weewx 3.5.0-1. I know this is > brand-new version of Raspbian--might this be the issue? One other odity is > that the istaller, when I can it, did not ask for parameters--I had to > manu

[weewx-user] Re: Airfield Weather Station - Raspberry Pi to weewx to Weather Underground - failing

On Monday, October 3, 2016 at 12:53:01 PM UTC-7, mwall wrote: > > normally it is not a problem to run weewx as root, but if you need to > harden the system, creating a separate weewx user can be a good thing. > > > Garrick - if you want to concentrate on other stuff like flying, just running it a

[weewx-user] Re: So close... (new DEB Install)

On Monday, October 3, 2016 at 3:09:15 PM UTC-4, Bob Breck wrote: > > Sorry--yes, Raspbian (v. 8 Jessie), and weewx 3.5.0-1. I know this is > brand-new version of Raspbian--might this be the issue? One other odity is > that the istaller, when I can it, did not ask for parameters--I had to > manua

[weewx-user] Re: So close... (new DEB Install)

On Monday, October 3, 2016 at 3:09:15 PM UTC-4, Bob Breck wrote: > > Sorry--yes, Raspbian (v. 8 Jessie), and weewx 3.5.0-1. I know this is > brand-new version of Raspbian--might this be the issue? One other odity is > that the istaller, when I can it, did not ask for parameters--I had to > manua

[weewx-user] Re: So close... (new DEB Install)

On Monday, October 3, 2016 at 3:01:54 PM UTC-4, Bob Breck wrote: > > The weewx.log file isn't there--can't seem to locate it. > on debian systems, log output from weewx goes to /var/log/syslog it would only go to /var/log/weewx.log if you reconfigured rsyslog -- You received this message becaus

[weewx-user] Re: Airfield Weather Station - Raspberry Pi to weewx to Weather Underground - failing

On Monday, October 3, 2016 at 2:47:20 PM UTC-4, Garrick Cruise-Smith wrote: > > Hi , Vince this is helpful. I think I am confused as thought PI user ID > had full privileges, weewx folder seems to have full read write access. Do > I need to set up another user to allow USB comms ? > > garrick,

[weewx-user] Re: So close... (new DEB Install)

Sorry--yes, Raspbian (v. 8 Jessie), and weewx 3.5.0-1. I know this is brand-new version of Raspbian--might this be the issue? One other odity is that the istaller, when I can it, did not ask for parameters--I had to manually edit the .conf file. I did run it with sudo, but am logged in as pi ov

[weewx-user] Re: So close... (new DEB Install)

The weewx.log file isn't there--can't seem to locate it. On Sunday, October 2, 2016 at 8:57:29 PM UTC-5, Andrew Milner wrote: > > You really need to find where weewx log messages are going to!! > > try tail -100 /var/log/weewx.log and see if they are there > > > > > > On Monday, 3 October 201

[weewx-user] Re: Airfield Weather Station - Raspberry Pi to weewx to Weather Underground - failing

Hi , Vince this is helpful. I think I am confused as thought PI user ID had full privileges, weewx folder seems to have full read write access. Do I need to set up another user to allow USB comms ? rw-r--r-- 1 root root 771 Jun 9 2012 staff-group-for-usr-local -rw-r--r-- 1 root root

[weewx-user] Re: Airfield Weather Station - Raspberry Pi to weewx to Weather Underground - failing

I googled for "Unable to claim USB interface 0: could not claim interface 0: Operation not permitted" and found a 2013 threadd here saying permissions indeed. https://groups.google.com/forum/#!topic/weewx-user/mvV-0o9hLgI (hint - try 'sudo' on a pi almost always, you are running as a non-privil

[weewx-user] Airfield Weather Station - Raspberry Pi to weewx to Weather Underground - failing

Hi, All I am a Microlight (ULM) pilot in Kent , England. We set up a weather station using old laptop running Windows 7 , Easywether , wireless hotspot and a Maplin Weather Station -https://www.wunderground.com/personal-weather-station/dashboard?ID=ILINTON4 It worked really well but power issu

[weewx-user] Re: So close... (new DEB Install)

On Sunday, October 2, 2016 at 12:50:03 PM UTC-7, Bob Breck wrote: > > New installation on a clear Raspberian install; configured for an AcuRite > 02064C. When I run, i get this in the log file (over and over again), and > no results in the weewx HTML file. > > Oct 2 14:17:01 raspberrypi rsyslogd

[weewx-user] Re: Small issue in Norwegian translation

Rune, The SteelSeries gauges pick up their translations from the scripts/src/language.js file (well actually the scripts/language.min.js file which is a minified version of scripts/src/language.js) If you have a look in langauge.js, down around line 1190 you will find the Norwegian translation

[weewx-user] Re: reportengine: Caught unrecoverable exception in generator weewx.cheetahgenerator.CheetahGenerator

Hi Rune, Ok, think I have spotted the issue. I mentioned that earlier versions of the gauge-data.txt template had a few issues; one of these issues was an error in the humidex formula that resulted in the same error as you have experienced when dewpoint approached 0 (C or F depending on your un

[weewx-user] Re: reportengine: Caught unrecoverable exception in generator weewx.cheetahgenerator.CheetahGenerator

Hi, I am using the gauge-data.txt.tmpl from the SteelSeries github site. To be 100% certain I re- downloaded the file, but the issue is still there. It does not seem to create any problems, but it is kind of annoying seeing it in the log. Rune. fredag 30. september 2016 15.47.17 UTC+2 skrev gjr

[weewx-user] Re: AS3935 and weewx.sdb

I agree, although yesterday we really did have lightning and I was home to see it. Both modules did actually detect lightning and weewx generated the alarm email. I even got warnings from the BlitzortungLive app about the same time. Steve KD2OM On Saturday, October 1, 2016 at 10:41:47 PM UTC-