Sorry I believe in having useful and enjoyable consoles. PS3 is on
the store shelves and I'm enjoying my Xbox =)
Pick a place and we can meet!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
“Success is not final, failure is not fatal: it is the co
We're still all coming to your house for beer, pizza and breaking your PS3
afterwards, funny boy!
HA!
- Original Message -
From: "Josh Luthman"
To: "WISPA General List"
Sent: Saturday, May 15, 2010 12:47 AM
Subject: Re: [WISPA] I'll be the one with the pink carnation - Hamfest 2010
Maybe you'll want to check out the Masque?
On 5/15/10, Robert West wrote:
> I'll wear a pink carnation so any of ya at Hamfest will know it's me.
>
> Not that it's different from any other day, I always wear a pink carnation.
> Sometimes I just want to feel pretty.
>
> Bo-
>
>
> -
The RC came out a couple of days ago. I'm waiting.
.
- Original Message -
From: "Stuart Pierce"
To: "WISPA General List"
Sent: Friday, May 14, 2010 6:38 PM
Subject: Re: [WISPA] ack settings
Airmax is up to 5.2.beta8, legacy is up to 3.5.xxxrc something.
-- Original Message
I'll wear a pink carnation so any of ya at Hamfest will know it's me.
Not that it's different from any other day, I always wear a pink carnation.
Sometimes I just want to feel pretty.
Bo-
WISPA Wants You! Join to
Sure its possible to have a radio that is failing. All I can say isthe
easiest and quickest thing to do is to 100% rule out everything else.
I have to admit, I jumped to think I had a bad radio twice, even go the
replacements shipped, and both times it ended up being cabling after all.
The Ap
The Redline an80 5.4 had a cold temperature problem.
Your theory is possible...
On 5/14/10, Kevin Sullivan wrote:
> It's been running six months without a dropped packet. Cable run is ~100
> feet, maybe a little less. We were powering it over the data port, but we
> switched to the management po
It's been running six months without a dropped packet. Cable run is ~100
feet, maybe a little less. We were powering it over the data port, but we
switched to the management port today. We checked the power output on the
PS, and with the power supply plugged into the power injector, but the radi
Airmax is up to V5.2-RC as of two days ago
On Fri, May 14, 2010 at 5:38 PM, Stuart Pierce wrote:
>
> Airmax is up to 5.2.beta8, legacy is up to 3.5.xxxrc something.
>
> -- Original Message --
> From: Josh Luthman
> Reply-To: WISPA General List
> Date: Fr
I see. I'm still in the legacy world.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to
continue that counts.”
--- Winston Churchill
On Fri, May 14, 2010 at 6:38 PM, Stuart Pierce w
Airmax is up to 5.2.beta8, legacy is up to 3.5.xxxrc something.
-- Original Message --
From: Josh Luthman
Reply-To: WISPA General List
Date: Fri, 14 May 2010 17:30:39 -0400
>What is beta 8?
>
>I've never changed the ack timeouts. I've always used dynam
What is beta 8?
I've never changed the ack timeouts. I've always used dynamic (MT APs
and NS2 CPEs).
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to
continue that counts.”
--- Winsto
I've been doing Auto Ack since beta 8 came out and it seems to be setting it
just right but I use UBNT for the AP as well. Before that I was setting
them a little more than the center of the CPEs average distance with no
issues.
However, with the UBNT on both sides we can also set the AirMax pr
I have MT for access points and mostly UBNT for client units.
Just wondering about the proper way to set the ack on the CPE. I have
always just set it for a little further than the customer on the UBNT
side and left the MT side to dynamic. This was set differently for each
customer. One migh
Possibly with the Trango rack mount style power supplies (have to go look at
one to confirm) or a third party power suppliy, but not with the Trango
laptop power supply style.
We were using the Trango laptop style PS on this particular Apex as it was a
single client user with VERY limited space.
Voltage on the power supply can be increased if all you need is a
shorter power run.
On 5/14/10, Brad Belton wrote:
> How long have you had the link installed?
>
> How long is the Ethernet cable that you are running the PoE on?
>
> Are you powering the unit over the management port or the data po
Hi,
Have you done the basic troubleshooting? Checked the cables, connectors
for water, etc. Have you rebooted the far side? When it comes back up,
what is the signal level?
Travis
Microserv
Kevin Sullivan wrote:
> Hello,
> We have an 11ghz Trango APEX link up for one of our incoming lines
How long have you had the link installed?
How long is the Ethernet cable that you are running the PoE on?
Are you powering the unit over the management port or the data port?
We had trouble keeping an Apex unit powered up some time ago. It would run
for 15min to an hour and then stop. Turned o
Time Warner Cable I expect is. That and Columbus is where they
connect to Level 3.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to
continue that counts.”
--- Winston Churchill
On F
Hello,
We have an 11ghz Trango APEX link up for one of our incoming lines, and it
went down this morning. There is no link light on either the managment or
traffic port on one end. We unplugged-and-replugged the power on it, and it
came back up for fifteen to twenty minutes, then crashed aga
Anyone selling fiber in Cinci?
Robert West
Just Micro Digital Services Inc.
740-335-7020
Logo5
<>
WISPA Wants You! Join today!
http://signup.wispa.org/
---
I seem to remember that they sent out an email saying that they were
going to have maintenance.
Regards,
Chuck Hogg
Shelby Broadband
502-722-9292
ch...@shelbybb.com
http://www.shelbybb.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf O
Meh, It only happens once every few months or so, And we have the bandwidth
so its not really a problem.
Nick Olsen
Network Operations
(321) 205-1100 x106
From: "Rubens Kuhl"
Sent: Friday, May 14, 2010 3:12 PM
To: "WISPA General List"
Subject: Re: [WIS
Multicast ?
Rubens
On Fri, May 14, 2010 at 3:07 PM, Nick Olsen wrote:
> That's about 7 miles north of me :D
>
> You should see the bandwidth spike because everyone in the county watching
> the streams. We also have a customer out at KSC that pushes a stream.
>
> Nick Olsen
> Network Operations
That's about 7 miles north of me :D
You should see the bandwidth spike because everyone in the county watching
the streams. We also have a customer out at KSC that pushes a stream.
Nick Olsen
Network Operations
(321) 205-1100 x106
From: forbes.me...@wab
yesterday we had a problem with them, No an issue, the customer had her
machine date set on month in the future, thus the spam filter was rejecting
all her sent mail. This also seemed to happen to many xp machines after
tuesdays MS up date. They had to reset the date, and if they set it
wrong
Good luck getting a response. The problems we have with them is I think they
are using an outdated spam database
-- Original Message --
From: "Mark Nash - Lists"
Reply-To: WISPA General List
Date: Fri, 14 May 2010 10:20:59 -0700
>We have been having alo
Danger, Will Robinson, Danger.
For those of you who have the Rad-Win 2000 series and are looking forward to
the firmware upgrade to take them to 100Mb Fdx. Be careful. The firmware came
out and I (stupidly) applied it. IT went on without a hitch and rebooted the
radios. They came up and st
http://www.nasa.gov/multimedia/nasatv/index.html
WISPA Wants You! Join today!
http://signup.wispa.org/
WISPA Wireless List: wireless
We have been having alot of problems sending email through Everyone.Net's
servers. Lots of server rejections, delivery resource unavailable type
messages.
Anyone going through the same problems?
Here's a message sent by our tech to their tech support this morning. This
message outlines our p
That's a good one!
So your name is really "RickG"? I tried to change my name to B
"Smiley-Face" B" once but the judge said I was too grumpy.
Oh well.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of RickG
Sent: Friday, May 14, 2010
I tell my customers they get "RickG" :)
On Thu, May 13, 2010 at 11:01 PM, Robert West
wrote:
> Lets just jump to 36G and scoop them all. See how the like those apples!
>
>
> - Original Message -
> From: "Drew Lentz"
> To: "WISPA General List"
> Sent: Thursday, May 13, 2010 7:31 PM
> Su
Well, shamelessly because that's what MOST of my customers run. If I used
something only a fraction of them used, then I might not be aware how
certain things look and feel to them; as seems to be the case here.
Friendly Regards,
Mike
-Original Message-
From: wireless-boun...@wispa.o
33 matches
Mail list logo